Stuck HP9180 printheads

Similar Questions

• OfficeJet Pro 8600: Officejet Pro 8600: problem installing new printhead - printer 'stuck '! Help

  Following the instructions on the HP Web site: with the removed paper trys, I removed the head of existing print/cartridges. I then installed the new HP Printhead and cartridges of startup. The LCD has acknowledged that the newly inserted Assembly HP authentic. The LCD screen for the last 20 minutes and counting reads as follows: "prepare the printer." Meanwhile, the printer makes no noise and obviously done nothing.

  Can I put the printer off, then on and see if that gets the printer 'preparation' to actually do something?

  Mark

  Hello

  While the printer turned on, unplug the power cord from the back of the printer.

  Wait 60 seconds.

  Turn off the wireless router.

  Connect the power cord to the back of the printer.

  When the priner is ready, just put next to the wireless router.

• 7520 new stuck in the installation phase. Print head move load ink cartridges

  I'm stuck in the new phase of printer configuration. After running through the commissioning of questions and I opened the cover to charge the ink cartridges and the print head did not move. I ran across several reset process... Unplug the printer. Wait 60 seconds and plug it in again. Browse the configuration... Unplug the printer... more.

  This printer does not seem to be any cartriages.

  Hey JohnTT,

  Sometimes, these printers come with packaging that holds the printhead completely to the right at the gas station.  This avoids damage to the product during shipping.  You see all plastic parts orange that it may contain in place or Blue Ribbon?

  So, have you tried the carriage to the right hand?  Can it be moved or is it blocked?

  If the printer still will not release the print carriage after the power cycles and move it by hand, then I suggest you return the product and return to the retailer of purchase or by calling the HP Technical Support to see about a replacement.  The phone number for the USA / Canada residents is 1-800-474-6836.  If you are not in this region, click here.

  I hope this helps.

• T520: Small piece of paper stuck

  The print paper at the end of the roller got stuck on the last 2 inches of paper, the printer has kept trying to print on this small amount until the paper was distroyed and wedged between the heads of the printer. I can not pull paper backwards because there is nothing to grab the hand on, and this really hangs in the rollers. I'm down to the last 3 reels but can't get out the paper.

  Help, please.

  Hello
  Please turn off the printer and remove the paper tray for A4/A3 in the rear, there is a locking systems. Then try to remove the paper from the paper path. Now please carefully remove the transport aircraft with printhead with ink cartridges (from left to right) unit, then try to remove the paper from small pieces of printer paper.
  
  If the problem resolves, please air flow inside the printer, then there remove it automatically.
  
  Thank you
  Rashed
  
  I'm not an employee of HP, but I am an engineer @ HP Partner and I share my knowledge of my own time.
  If your problem is resolved please click the button "accept as a Solution.
  If my answer was helpful, please click the 'Thumbs Up' to say 'thank you '.

• HP Designjet T790 stuck at 94% initialization

  Hi have a HP Designjet T790 that is stuck on 94% during initialization and making a rattling noise. Before this past that the printer has had a problem with the wobbly lines and incorrect colors. I realized maybe it's an isue of printhead. -What items that could cause this problem?

  I saw the problem of 94% and it can be many things. Best thing to do is to remove the paper, remove the printheads and ink cartridge. Start of the printer and see if it comes to where is demand now to the point of first ink and paper.

• large format hp7500a stuck head

  Large format HP Officejet 7500 has

  Windows 7 64 bit

  In network

  I've had this printer now for about 4 years, and when it works it is fine. BUT, when it is not...

  So far, I got jams paper and false paperjams, ranging from the machine to sleep and wake up only when I walk and push the button start (solved). Whenever you wake up the machine until it's cleaning the heads, ink consumption is high, etc.

  Now, he decided to get his head stuck. I mean that it does not move. I followed the instructions of various web sites and option 3 of the HP site is not helping! (shows a common problem...) so, nothing worked so far.

  In addition, there are advice to update the firmware, preferably through the printer. This does however not work because as soon as I started / reset the printer she's trying to move the head. This does not work? and the error message reapears, before I can get into any window display to do something!

  It seems that the coverage on the printhead is not mobile.

  Please advice.

  Sorry, I needed to print. Some say that I'm an engineer, so I removed the little cover where the print head is parked/stuck under.

  

  Now, I could remove the ink cartridges and the print head.   Was covered in ink so I suspect it got stuck on the lid with ink, where the problem. After cleaning the print head and carefully scrape most of the ink nee glue I could move this cover. As a result, I could replace the print head and ink cartridges which allowed me to do the good mentioned status report of movement of the head end printer...

  Thanks for your patience, I hope that this solution can be useful for someone else in the future

• OfficeJet Pro All In One 6835: Officejet Pro 6835 printhead error

  My Pro Officjet 6835 all in one shows a printhead error.  I installed new ink cartridges about 2 weeks ago, and it printed fine since then.  I tried troubleshooting.  When I try to "Clean printhead" computer, it simply says "printer is busy".  When I try to clean the printer configuration menu, it shows that it is cleaning for about a half second and then returns to the maintenance printer screen.  On one attempt, it seems to work, but after 3 hours, no there was no change or action.  I have reset the printer (unplug the unit for more than 60 seconds - of the printer and the power outlet), off several times and contracted cartridges to attempt to clean the print head.  It doesn't seem to be removable, so I'm stuck.  I'm currently under Mac OS X Yosemite 10.10.3.  I really need to be able to print several documents as soon as possible.  Help?

  Hi @customerHI

  I would advise to call HP telephone support. The print head is not replaceable, and you will need for the printer needs to be replaced. Can you please post back to let us know how you go?

  Thank you

  Ciara

  Americas & Asia

  http://support.HP.com/us-en/document/c04839288

  Europe, Middle East, Africa

  http://support.HP.com/us-en/document/c04839289

• Printhead Photosmart Plus B209 problems

  I have the printer above, just more than a year.  My ink was low so I replaced it, printed the alignment page, he went up and scanned, then it went to "the installed print head is not intended for this printer, or it can be damaged.

  I followed the instructions for the cleaning of the specified areas-no chance. Unplugged for 10 minutes and not turned back on - no chance. clean once more-quit.

  Does anyone have a solution?

  The cost of a print head?

  Cost of a bat of aluminum office space?

  No point wasting my money on the teleplone customer service, HP will not ship outside of US / Canada.

  Thank you

  Phillip

  "Staring Kin Jong - it".

  I thought about it!  I have the same problem that everyone has this horrible impression made by HP!   I took the print head and put it in a pan with boiling water.  Got it out, repetition and enptied water.  Boiling water erased the shit that gets stuck in this defective product.  After put back, ran a printhead clean and everything was perfect again.  Black ink was printing.  Please spread the word!  There are forums everywhere on this printer.  Please tell everyone how to fix it!

  IT's FIXED!

• Z6200 - printhead status: unknown, impossible to load the print heads.

  Hello

  I am a user of HP DJ 5500 long and just before Christmas, we have invested in a Z6200. Right now, I have a problem that happens with him because he is stuck in a loop trying to replace the printheads.

  I spent some time trying to reinstall the print heads and I tried the suggestion for the Z6100

  Nothing I've tried has been able to clear this loop. Is there a way to do a hard reset, then insert the PH as new? Or is that what makes the above method? Right now, I'm off the printer and the print heads on.

  Any help would be appreciated massively, I had to do this thing up 3 flights of stairs and still have not actually seen print!

  Remove all the ink cartridges and the print head if you don't have it already. Turn on the plotter and you will be asked for supplies, don't know if the ink cartridges and printheads first. When it asks to insert the items one at a time and the blinking icon must return to solid. Maybe your have one or several heads wrong causing the problem. If it rejects a print head print head must be indicated on the display as to which one is causing the problem.

• macOS Sierra stuck on the Time Machine backup

  Its been 2 weeks now since I updated to macOS Sierra and my Time Machine backup is always stuck on "preparing backup" and I tried different disc backup on another partition but still no luck.

  Make sure that:

  o drive the TM is excluded from Spotlight indexing non-mandatory;

  o that all software anti-virus is disabled (especially Sophos);

  o journal of iCloud and other cloud services.

  o check this article: macOS Sierra: If Time Machine still at the stage of "preparation"

• Sierra of MacOS - iCloud Drive Documents & Desktop keeps Getting Stuck download

  Hello

  as stated in the header after activating the iCloud Drive to include Documents and desktop download stuck guard.

  Since almost 2 weeks I started the task mean to ask iCloud to include above mentioned files. Total quantity was about 100 GB download. I have 1 TB of storage for iCloud. iCloud is always download and always get stuck after about 10 to 30 minutes to download. Then I have to restart after that it starts to load only from getting stuck again.

  I was on the phone with Apple Care who had no idea of what might happen. They Said and I quote "we have no problem with iCloud download and your problem has not yet been recreated by others."

  I find it very hard to believe that I can repro this problem on 3 different systems.

  I have Cable speed of 400 Mbps downstream a 25mbit upstream. I have zero upstream of questions to dropbox or Spideroak at an astonishing speed. ICloud is the slowest I've ever known in my life but as I said after 14 days, it has yet to fill about 40 GB. This is ridiculous IMO.

  If anyone has any ideas on what is once again wrong with iCloud, I would of course tips

  Thanks in advance to anyone who takes the time to post!

  Try to go into System Preferences/iCloud and stop synchronization. Wait a few minutes, then recheck the timing.

  Have you tried the signature to iCloud and then reconnect?

• Activate App stuck on waiting and power Mode low does ' t

  Hi all

  I have at least two concurrent problems with my iPhone 6 + iOS 10.0.2 (but started with iOS 9).

  I can't install new application directly from the App Store on the phone because they were stuck in the phase of "pending". Same behavior of update of the applications that are already installed.

  The only way to update/install the app's iTunes download and synchronize.

  The other simultaneous problem is in what regards the activation of "low power mode" with the rocker switch (settings > farm > Low Power). Whenever I try to activate (manual or automatic 20% of battery) function, the gray toggle becoming in the Middle, then return to the OFF position.

  I already have backupped & restored several times, but nothing has changed.

  How can I solve this?

  Thank your

  Best regards

  Hello Axoduss,

  Thanks for posting in the communities of Support from Apple. I see that you have two problems. One is that the low power Mode is not activated, and the other is that updates and new applications are blocked pending. I know that I rely on my iPhone for everything. It is important to ensure that it works as expected. I'll be more than happy to help.

  Great job to the backup of your phone and restore. It's a great way to help solve these issues.

  If you are restoring from a backup, the problem may be in the back upward. I recommend to reset the phone to factory settings and set up like new to see if the Mode low power and installing apps works. If this does not work after the installation in the new and not after the restoration then you want to restore your data manually and not market back. Here is an article on setting up the phone as new:

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  Let us know if that helps.

  Take care!

• Why have I not 110 songs stuck in my download queue?

  My computer hard drive crashed and I do with my iPad. I had music in the cloud and I wanted to download it to the iPad, but it seems stuck in the queue of download. He said: download error, tap to try again but nothing happens. Thoughts?

  I had this problem some time ago, too.  I ended up contact iTunes support.  They have updated something on the main server and it removed them from the queue.  Drove me crazy.

• What happens if I don't remember the security issues and I'm stuck on my email?

  I don't remember my answers to security questions, and I'm also stuck on my email

  Hello

  As you can not receive emails, you will need to contact the Apple Support.

  The information is available here:

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

• Sierra of macOS download stuck at 496KB

  Hi all

  This morning I am trying to download macOS Sierra since the app store - it's been stuck at 496 KB for about an hour now with no progress.

  Any suggestions on how to get out of this problem?

  I don't see a button "pause" ope the download page, and I don't know how to cancel the download safely.

  Remove the partial download and start it again.

  Launchpad should display an icon for download that you can suspend and resume.