Stuck on the Firefox configuration screen

Similar Questions

• Stuck on the Apple Logo screen

  My phone froze so I restarted. It got stuck on the apple logo screen and I tried to restore it. When I have it plugged into my laptop it would not restore because my boot drive is full. I tried to remove as much as I could turn off my laptop and emptying the trash and nothing will work. Its been sitting stuck/frozen on the logo of apple for 4 hours now. How can I fix it?

  Only way runs a restore via iTunes by putting the iPhone in recovery mode

• HP Pavilion 21-h010la stuck in the HP splash screen.

  Hello. I'm having a problem with my computer. When I try to turn it on, it gets stuck in the HP loading screen. I used the PC Hardware Diagnostics UEFI and he says that it meets the test, even if the SMART hard disk check returns a WARNING. The program didn't give me all the instructions to fix it later. Do I need to change?

  Hi there @mafi11235,

  That the Forums are with you!  It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that your computer is stuck on the HP logo at the start, and that he was a WELL-INFORMED driver error message. I'm happy to help you with this.

  If you get a SMART disk error, so it is normally a warning of impending failure, based on testing the drive runs itself. This could mean the drive is defective or shows signs of failure, but in general you want to replace it and try to make a backup of your data as much as you can, until it was inaccessible.

  You have recovery media or already made for Windows 10 recovery disc? If this isn't the case, you will want to get some for your system. Computers HP - get HP recovery disks or HP USB recovery disc

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• T420 stuck on the startup Lenovo screen

  Hi I'm new to this community, so I would like to applogise if I have something simillar to mist (I checked some but not solved my problem).

  I have a thinkpad t420, I bought a used one. It worked great, and I bought a friend, that I trust. I installed an SSD, was usnig Linux, and everything worked for a month. But then I bought a HARD drive caddy and replaced the CD-ROM. After that my thinkpad has worked for a day (although he does not recognize the second HDD). The next day, I tried to find BIOS for some parameters and after I restarted my laptop, it was stuck on the startup Lenovo screen, reboot loop. I tried:

  -removing and replacing the caddy with the CD rom.

  -replace my SSD drive,

  -replace the RAM (two locations),

  -Reset BIOS,

  -launch a diagnostic CD (but it does not start, nor can I boot from a USB key)

  My google search showed that he could bi a problem with one of the USB pins inside one of the ports (short circuit or something like that), but I couldn't find any damage. So I'm thinkig that the motherboard may be damaged, but I can access BIOS, but it's the only thing I can do with it.

  I'd be thenkful Walker of any advice or help, before moving on to official Lenovo service for help. Thnak you!

  Z.

  You can always source a new mobo on eBay, or any part on your T420 to recover some costs.

• Windows 7 stuck on the Windows startup screen. Help!

  I was playing a game (Counter Strike: Global Offensive - on Steam) on my PC I got the blue screen error was 0x000000A3, after that I booted my PC then it got stuck on the Windows splash screen. Now, when I start my PC it gives me only 2 options, "start Windows normally" which leads to frozen Windows startup screen and it gives me this: '(recommended) launch Startup Repair' that I have used and tried all the options, except the command prompt like I do not know how to use it.

  My PC is a Windows 7, Asus

  Hello

  Often, this will work when the built-in repair software will not.

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon.

• Stuck at the start-up screen

  Hi, I use Jdeveloper 12.1.3 and the extension of the ADF Mobile on Mac OS X Mavericks. iOS 7.1 and Xcode 5.1.1

  If I make an application with a HTML file and deploy Simulator iOS, the app works great.

  If I apply with an AMX-page the and deploy on iOS Simulator, the app is stuck at the start-up screen. "Loading...". »

  Any ideas? I tested the "Navigation" public sample and deploy and works very well.

  Concerning

  Thomas H

  I looked in the debugging using the iOS Simulator. The problem causing my problem was not supported for encoding. I used ISO-8859-15. Changed to UTF - 8.

  Thank you for you detrilles Sudipto link on debugging =)

  -Thomas H

• Windows is stuck at the "Closing Windows" screen

  Hello:

  I'm having a problem with the Fusion 4.1.3 on an iMac 2010 10.7.3 running. Windows XP is stuck at the "Closing Windows" screen. What can I do to complete the procedure to stop and then restart Windows?

  Thank you

  Post edited by: JP7469

  Try to do a forced shutdown... Virtual Machine menu > Option key > Force Shut Down

  Take a look on: switch Power controls from the default Options

• Stuck in the HP configuration menu, when I install my 760.

  I have a problem when I start my computer. I have a HP H8 - 1020. So, I went to install my new graphics card which is an EVGA GTX 760, I changed the power supply to a CX600M of Corsair, but when I start my computer I'm stuck on the HP Logo/setup menu, then if I wait until there is a series of beeps. After these beeps my screen goes black. Now, if I reinstall my old graphics card, it starts without a problem and I can continue to use my computer.

  Model of card - http://support.hp.com/us-en/document/c02839589

  Any help/advice would be great.

  -Matt

  This isn't a new issue, see here with the HP8-102 x series.

  Big_Dave had a suggestion:

  On this post, ask the OP how many beeps are heard between breaks?  You can go to the partner Services media library, find the series, then watch motherboard diagnostics codes.

  What is suspicious is that the card EVGA 760 is backward compatibility with a motherboard no UEFI.  I have a NVIDIA 660 in my PC FL and had to get a fix to allow him to work with UEFI. I asked EVGA why the patch has not been incorporated in the new Council and they said it was to allow backward compatibility with older non - UEFI PCs. So I suspect the 760 has the task and is not compatible.  EVGA will have to confirm this suspicion.

• HP Pavilion P6724IT: Hp Pavilion P6724IT stuck to the HP splash screen after the installation of the new VGA

  Hello people.

  I buyed a new VGA, a Gigabyte GT740 2 GB DDR5, before I had an Asus GT630 2 GB of DDR3 memory and had no problem with it.

  After you mount the new VGA, I noticed that the computer gets stuck to the initial start with the HP logo screen.

  Can't even get to the BIOS, but if I remove the card and use the igpu it is all ok.

  I tried to update the bios with the latest version on the HP website (v.7.15) and nothing.

  Tried to install it with Windows 8.1 and windows 7, nothing.

  I tried all the things I found on the net of people with the same number, nothing new.

  If I'm pretty quick and I press certain keys we Gets the black screen and stuck in any case, do a few beeps and then go to a kind of sleep and if I keep pressing a key, it makes little noise Cracklin'.

  In fact I can't afford a new motherboard so I wanted to know if I can find a solution to the problem, because it's really frustrating and I spent much time trying to understand with your help.

  Sorry for my bad English!

  Hope someone can help me

  See you soon

  @wb2001  Thank you for asking me to review this theread.

  ZeroProsekt,

  You must answer such questions as published by the wb2001.  If you do not know the answers, then contact the manufacturer of the graphics card and ask for more information on the graphics card of specific model you are trying to use.

• T400 is stuck on the Thinkpad splash screen

  No laptop computer 11 months, no problem, I woke to find the computer stuck on the startup screen. I tried to restart, has released the battery, tried pluged, unplugged and continues to stop at the start screen. Any suggestions?

  1. check your USB ports and see if they are damaged or bent pins or pins to touch others.

  http://Forum.Lenovo.com/T5/R-L-series-ThinkPad-Laptops/R400-R500-won-t-boot-past-the-logo-screen/TA-...

• Aspire V5 - 122p stuck on the Acer splash screen

  I did a factory reset on windows cleaning 8 using the acer recovery option.  Everything was going well until I tried to update to windows 10 (I did the windows free 10 earlier on this machine without any problem.).  After you have installed windows 10 and the system has been updated, the system said that it was necessary to restart and now it does not start at the top.  It is stuck on the acer screen boot.  I tried all the options in the recovery section that opens after 2 failed charge.  It crashes just on the acer screen. It won't let me boot to safe mode, I can't reset, I can not restore. I don't like on the files on the pc, I just want the pc to be functional again. I have a good restore image on a USB key, but the only way it works is within windows with the acer recovery option.  When I try to restore or repair options, it just says: this pc is not repairable.  I even tried tried support for windows 10 installation/recovery and recovery using a USB drive and I get an error on it.  I tried everything I can think of.  Currently, the laptop is a brick.  Anyone got any ideas on a way to fix this thing do start? Thanks in advance for any help.

  Hello

  I select custom install, not upgrade or repair the USB. When you reach the disk selection panel, select the partition where you had previously installed windows and then click the format button which is below the selection window. After formatting, select the partition to install windows.

  Do it with a windows 10 USB installation. I think it should work.

  Be careful, because in this way, you will lose all the data that is on that partition.

• Hi, my Aspire Z5600 is stuck on the Windows re - screen and I can't use the USB keyboard screen

  Hi, I hope someone can help with a problem I have with my Aspire Z5600 all in one computer. I can't restart the machine because it is blocked on the page re-loader of Windows when I try to reboot.

  The screen is grey anthracite dark with white writing and gives me two options, to select one of the options that I would need to use the arrow keys on the keyboard and press ENTER to the action of the selection. The problem is fashion seems to be invalid the USB ports and the touch screen, so I can't select and option of each key board or screen and it will not pass, is just stuck on the screen, making the computer unusable.

  Can someone give me a solution to remedy to this problem please?

  USB should work even in this form, have you tried another keyboard?

• Stuck on the HP logo screen after installing new graphics card.

  I installed a new graphics card today and I'm stuck in the loading screen. My old card boots gts 450 my computer very well, but my new graphics card cannot. I replaced my old diet with a 600w power supply, and it worked fine with my old card.

  It's my computer HP Pavilion h8-1210 = http://www.amazon.com/HP-Pavilion-HPE-h8-1210-Desktop/dp/B006VG0HNM

  I tried to install the latest version of the Bios with no luck. I guess it is the motherboard, but I'd be happy to work around that.

  Danny

  metall909,

  If you use an EVGA 760, so your question is probably a vbios into the video card.

  HP PC delivered after November 2012 are pretty good at speed on the last level of UEFI version. This level begins to version 8.

  I met problems with EVGA 760 UEFI and ASUS claims it is a vbios video card problem and EVGA says this is a motherboard problem.  I would not recommend using this card until EVGA releases an update of the vbios.

  If you are in a situation of pointing finger between HP and EVGA.

• 421SO HP G61: stuck at the blue login screen

  Hello.

  I have a problem with my laptop, a model of 421SO G61, and the question is showed in a Youtube video.

  Link: https://www.YouTube.com/watch?v=Y7FIDt9SonQ

  The problem occurred after that I left my cousin played the Sims 4. She said that after she closed the Sims 4, a window appears and it has clicked away and stop the laptop. The next day I started it and it got stuck on the screen that is shown in the video. She unfortunately can't remember what has shown the window pop up.

  I tried to reset hard, leaving the rest of the laptop computer for 24 hours to reset the BIOS settings and to test (who first succeeded and only shows not all errors) and leave it on for 1 hour + to try to let it load.

  I have a theory that the hard drive is ruin or the operating system does not sort properly load.

  As I can't access the hard drive and the data in it, how this issue can be fixed without losing all the data important and meaningful; for example images?

  Thank you!

  @22Bebz,.

  Hello and thanks for posting back.  You can try to do a full system recovery and if that fails, you should contact HP support for service options.

  HP computers - performing a recovery of system HP (Windows 7)

  To contact HP support, please use the following link.

  Contact HP support.

  Thanks again for posting and have a great day.

• Start stuck at the Dell logo screen

  Hello

  I have an inspiron nine 5447, which was working fine until yesterday. If I try to start now, it's just stuck to the Dell logo and I can't go in the BIOS settings. I tried pressing F2 and F12, but the screen is still stuck at the same screen of the Dell logo. Can someone help me with this.

  Thank you

  Nikhil

  Hi Nikhil,

  External devices (except AC adapter) connected to the computer. If so, disconnected the and try to turn on the computer.

  If it's the same situation, and then turn the computer off. Key down, then and now the power of FN key on the computer.

  In the case, the computer is blocked at the Dell logo. It's a hardware problem, contact Dell Technical Support in your region to replace the parts.

  I hope this helps...