SUCCESS IN BURNING DVDS!

Similar Questions

• A60 burned dvd problem

  Hi help
  Bought equium a60 to burn DVDs using clone, but after about 40 min when watchingburned the picture begins to break up and him freezes

  Hi Kat

  I use the Nero Burning software too and it works great. I t n have no problem. In my notebook, it is DVD multi burner, and I can burn CDs and DVDs successfully. I put t think Hat overheating may be responsible for this.

• 5200 801 with DTS-6012 DVD burn DVDs!

  Since I first bought 5200-801, I had problems burning CDs and DVDs. write speed would never go to 2 x as it should be, and - more important-record would be interrupted by an error.

  I downloaded the update of the firmware (SDR6012-1334. (EXE) that has been posted for this problem (interruption).

  Since then, I usually have to burn the DVD 2 or 3 until I get a readable. The operation appears successful, but the dvd is not burned!

  I noticed that the contrast between burned and unburned area is higher on copies of the work of those who does not work on the recorded surface. Looks like the laser is not strong enough!

  I buy a box with 10 DVD to write 5!

  Any help will be much appreciated.

  Thank you
  Yiannis

  P.S. I have responded to something else first to activate the 'POST' icon I think the moderators should check.

  Hello

  What CD/DVD writing program you use? Has this problem occure with other CD/DVD writing programs also?

  Where did you download the update of the firmware?

  To bye chris

• Qosmio G20-118: Multi drive is not burning DVDs

  Hi guys,.

  This day I have never been able to burn a DVD with music files from itunes (in the form of data) using my G20-118, although I have no problem what to do in my old office. I have tried several different DVDs without success. Everything seems to go smoothly until the last dry when there is an error. I had the same problem that burn DVDs with Sonic. Finally, my drive rarely reads CD of music stored on other computers. It also came with data CD, although rarely.

  Do I have a defective disk? This CD/DVD that you tried and must work on my system?

  Thank you very much!
  Pedro

  Hello

  I don't think it's a compatibility issue with the disks because the player accepts and then displays an error.

  For me, this looks like a bad drive, but perhaps you must first reinstall the driver or the whole system.

  Good bye

• Cannot burn DVDs on Qosmio F10

  Hello

  I have very little success to burn a DVD.
  I'm using WIN DVD Creator and go through all the steps, but WIN DVD gives this message:
  The media cannot be deleted.

  I have no problem burning CD and DVD seems to be impossible. Any help out there?

  OLE

  Can I ask you what kind of DVD have you tried?
  It seems that you want to erase the DVD before burning. Have you tried to burn to DVD - RW?

• Satellite M40: Power calibration error - drive cannot burn DVD - RW more

  My drive is a carpet * an oem UJ - 831S. After a screw-up partitioning job, I had to format my HD and reinstall Windows XP... and then I can not burn DVD - RW more.

  Tried many programs such as Nero and a fireman, gives an error of calibration of power from the beginning.
  Burning CD - r and CD - RW no problem however, and I can read CDs and DVDs of movies very well.

  Google and searched for a month without success, tried to blow the laser lens, but there is no dust, I tried different media, etc. I know the best answer is that the drive is done, BUT I refuse to acknowledge it because it is too big of a coincedence to stop working right after that I reinstalled XP.

  An interesting note however, my laptop has not been provided with a CD of Toshiba, so I had to reinstall manually more drivers by downloading the Toshiba site, so I have a funny feeling, this could be a thing of the software/firmware, or even a framework.

  I installed the new firmware 1.02 for the reader as well. I don't remember what the firmware was before resettlement, IE the laptop computer settings to factory default, I'd like to downgrade to 1.00 if possible.

  Experts have ideas? And is there a way I can reset the firmware?

  Maybe I could remove the drive from the system-> devices and let XP Reinstall for me?

  Hello

  > I don't know the best answer is that the drive is done, BUT I refuse to acknowledge it because it is too big of a coincidence to stop working right after that I reinstalled XP.

  Of course, it s simply to say the drive is dead because everything looks like a hardware malfunction. Most often the power calibration error appears because of the drive lens can't calibrate in the right position and thus cannot read some CD or DVD s s or it of not possible to write about them.

  But maybe you are a lucky man and might try this procedure:
  -Try to remove the drive physically from the Bay for laptop
  -Restart the unit without the drive
  -In this case the operating system should start from the HARD drive
  -Close the notebook then reinsert the drive unit in the Bay of s for laptop
  During initialization, the laptop should recognize the drive and must pick up the firmware

  Then you can check if you can burn the DVD again, otherwise you will need a new drive

• Satellite Pro A210-1 b 1 does not burn DVD

  Hi guys,.

  I got a problem here. I tried many times to burn DVDs on my laptop, but it does not work.

  I tried to burn DVDs with Nero, DeepBurner, Windows Media Player and Windows explore any of them successfully. (Only Nero and just once).

  What is happening is: I put the blank DVD disk, start Nero (or other program) select the files and click on burn. It doesn't show any errors during combustion and post-combustion, I check the disc and seems to be really burnt (the color of the disk where files there is darker) but after inserting the disc again in the PC it shows: blank DVD!

  I'm really annoyed with it because I got a lot of files to burn, and I can't.

  Anyone has an idea on what to do?

  PS. : Already put the recovery disk and formatted my system whole and already tried with Windows XP.
  I tried to burn a DVD (to check if it is not the media) on another laptop and it worked very well.

  Please guys, try to help me.

  Thank you
  Felipe

  Post edited by: fbhz85

  You can check if these DVD created on your laptop is empty on other laptops or computers too?

  Did you do an update of the firmware of your player? This can sometimes help.

  For a TS - L632H ODD, you will need the TO03 firmware.
  For a TS - L632P ODD, you will need firmware TO02.

  Try them and let me know if this worked for you

• Burning DVDs in DVD player not working not

  We have problems with burning DVDs from our PC (slideshow photos and music). It downloads very well and gives us a confirmation that he copied the disk correctly (we can see in our PC) However when trying to see it from a DVD player does not work.  We used a DVD-R disc.  We have windows XP/Windows Movie Maker.  We used these DVD-R discs for other records from a digital recorder and they worked very well in our DVD player.

  We have problems with burning DVDs from our PC (slideshow photos and music). It downloads very well and gives us a confirmation that he copied the disk correctly (we can see in our PC) However when trying to see it from a DVD player does not work.  We used a DVD-R disc.  We have windows XP/Windows Movie Maker.  We used these DVD-R discs for other records from a digital recorder and they worked very well in our DVD player.

  ============================================
  Burn a video DVD that will play in a free-standing DVD player you
  need software for DVD creation... the only version of Windows XP that
  included this option was the "Windows XP Media Center Edition 2005.

  See the following article:

  Movie Maker 2 and DVD burning software-
  Media Center 2005 Edition
  http://www.Papajohn.org/mm2-DVD-MCE.html

  Perhaps the following freeware should help you get started:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to a folder on your hard drive and
  install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Create dvd Windows comes all of a sudden won't burn DVDs why?

  No seriously... I tried a new drive... new dics new codecs and now I'm 6 days and customers are upset

  create dvd Windows ruined me... I'm on vista. HELP >

  I did everything that that little cat deals at microsoft told to do me and NOTHING worked.

  I can only imagine that you tried to disable all filters
  DVD Maker...  If not, see the following article:

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
  (scroll waaay down for...) What to do in case of problems)

  Always without success... it may be worth trying to save your
  project in Movie Maker in the. WMV video format and
  burn the DVD with DVD Flick free software:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD-flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in most
  free-standing DVD players... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  To allow a longer time on the DVD... left click the
  The project settings button / select video / open the target
  Bitrate of drop window. Choose a will more small number
  result in a longer time on the DVD. Press on... Accept.

  The vertical bar to the left of the screen will tell you
  How much compression you need.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  software advanced as Sony, Cyberlink, Nero, Roxio,
  Adobe, Ulead, etc... but at least it is a start.

  Good luck.

• Why my laptop won't burn DVDs?

  • I have a Sony Vaio, computer laptop, it is the vgn-fw31j and it works with windows vista home premium! I tried to burn DVDs using roxio, create DVD windows and also Nero. And it completes successfully but recognizes the drive when I go to play the disc it always reads also empty in my DVD player and also with audio cd then, I then bought an external burner and I plugged in USB and DVD maker to burn a movie on this disc and it still doesn't work! Why is this happening? Help, please!

  Hi ashleighmccluskey,

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

• Can not burn DVD (s) in Adobe Encore

  Hello. I can't be able to burn DVDs in Adobe Encore. "Access denied" is the error that keeps popping up. I imported the mpeg transcoded file and timeline he successfully. The project has passed the check but when I ordered to build again, he failed. I still used successfully before that. How can I make it work again? What I am doing wrong this time?

  You will probably need to log on to an Admin account and still run with administrator privileges.

• Burning DVDs from first pro timeline

  Is it possible to burn a project of first pro timeline directly on DVD without yet?

  Thank you

  arikw

  First Pro 2 used to have a burn directly to dvd fearture, but overall it wasn't much of a success.

  The way it goes is that you send your timeline yet. (File/dynamic Link/send to yet)

  Still opens, choose the settings of the dvd.

  Timeline appears in the project window.

  Go to build, then press on check project.

  End Action game and remote title (clicking on the name of the 'problem' the appropriate tab wil open. Remote title = button remote control)

  Burn DVDs.

  http://TV.Adobe.com/show/learn-Encore-CS4/

• Still burned DVD takes a long time to load into the reader

  I created a DVD in Encore CS3.  The final DVD is approximately 60 minutes and has 4 menus created in Photoshop CS3.  I purchased the Dolby converted in first and used this file as PCM format indicated by a friend vs.   The DVD works fine but takes a long time to load in one of my DVD players.

  A Sony player, it takes between 40 minutes and up to 70 seconds to load and play the first menu.  Each time is different.

  (This same drive load purchased in-store Hollywood style DVD in about 15 seconds on average)

  In another Sony player my DVD on average about 25 seconds

  A Panasonic player, it takes about 15 seconds

  In a portable player from JVC, it takes about 8 seconds.

  That is what it is?  This DVD is created for replication in a large number, but I'm afraid the long loading time is a problem and you want to solve this problem before sending it to the wide for replication.

  Help, please

  Thank you

  EDM

  EDM,

  One consideration is that there is no DVD drive certified to play any burned DVD, only those press/replicated. Most do and do as well, with provisions, but some don't.

  Now for these provisions. High quality blank media will get a closer all the success, just like using a slower speed of the burn, as the max. These two considerations will get a close, as it is possible.

  What brand of blank media are you using? Verbatim and Taiyo Yuden are about as good as it gets.

  How fast you burn to? I would look into a speed in the middle of the range permitted by the combo of speed by the media and the burning speed. Slower is better than more fast.

  As Stanley, there may be differences with r and + R media and players. There has been much more a problem, but some players still might prefer a vs the other.

  Finally, when you say "replicated", do you mean that you send in a DLT to make a House of replication a glassmaster, where the DVD is going to be in a hurry? If Yes, these replicated discs will be like the Hollywood DVD and will be NOT burnt, as was your test drive. The question will be moot with these, as they will be DVD-videos, where your burned DVD is really a DVD - ROM.

  Good luck

  Hunt

• Burn DVDs with Imac 2015...

  Hello Forum,

  I just updated my Imac 2011 and bought a newer Imac 2015 and I forgot it doesn't have a DVD/CD player.  Question I'm looking for recommendations on what to buy to be able to burn DVDs, play, DVD and CD.  I have customers who still use the DVD and need to burn and create menus that I am probably able to do with DVD Studio Pro?

  Thank you!

  -Tony

  Apple sells an external USB optical drive specifically for use with models that do not come with an optical drive. You will find in the store.

• How to burn DVD when my Mac Mini is not a taken SuperDriver support

  I made iMovie project. When I wanted to create iDVD project I received a message < Your Macintosh has not have supported SuperDrive. Please note that while you will be able to work with the iDVD project, you will not be able to burn a DVD disc >

  OS X El Capitan

  Mac mini (late 2014)

  Processor 3 GHz Intel Core i7

  16GB 1600 MHz DDR3 memory

  Iris 1536 MB Intel graphics card

  Any body knows how to burn DVD when my Mac Mini does not support SuperDriver.

  Thanks in advance

  Prangins

  1. Purchase an external optical drive
  2. borrow an external optical drive
  3. get use to another Mac equipped with an optical drive