sudden problems printing in color in photoshop?

Similar Questions

• Hi, I have a Canon iX6850 printer, but I can't print in color from photoshop. The prints are black and white? What should I do?

  Hi, I have a Canon iX6850 printer, but I can't print in color from photoshop. The prints are black and white? What should I do?

  Hi Vera,

  Thanks for the update.

  Make sure that the image is set to RGB in Photoshop.

  In addition, we suggest you follow the steps below:

  1. exit and then restart Photoshop

  2. go in the file menu > hover your mouse over Print > press and hold the space key

  3 try printing

  This would reset the printing preferences for Photoshop.

  Kind regards

  Claes

• HP Deskjet 3050: Problems with printing in color?

  Hi all, I have problems printing in color. No idea what to do. Here's the problem: I'm trying to print in color and the colors look darker on one page, my colors are fine then saw green to halfway through until its finished. On another page, the colors are ok, but some colors are missing.  I tried the cleaning test, the colors seem to come out ok! Tried to see the ink and the remaining portion. It seems to be more left black and yellow, cyan and magenta. No idea what do then, never had this problem with the printer before. Thanks for any help!

  Looks like you have a cartridge that is short of magenta or default.  This can happen to cartridges that are very old, even if they still have ink or third party cartridges that were not filled out properly.  The steps of troubleshooting in the paper here may help, but I suspect that you need a cool color cartridge.

• Help! OfficeJet 6500 has only prints in color!

  I have an OfficeJet 6500 has more that suddenly started printing in color only.  Black is so low, it is unreadable.  I put a new cartridge in, but that does not solve the problem.  My printer is out of warranty, so I hope someone can help me please.  Thank you!

  Here a link to a document that takes account the results of poor quality for your printer model. It will give you the steps to follow that will attempt to resolve the issue of the output that you experience with troubleshooting printer. I hope this helps.

• Problem printing CS6

  Suddenly, my printer only works on Photoshop CS6.  When I select the printer HP 8600 (only one) it says that there is a problem and stop the program photoshop - said that adobe will let me know if there is a fix?

  No problem with other programs and the printer.

  The printer has been reinstalled, but that did not fix the problem - I had Photoshop CS6 uninstall and reinstall.  That solved the problem.  Thank you for your help

• HP Officejet Pro 8500 has more: 8500 has more - will not print in color and alignment of printhead failure

  I have new ink cartridges, but it will only print in black.  Grayscale is not on.  I also cleaned the print heads several times and tried to line up, but this part came failure refers to the documentation.  What are the documents?  I would lov eto to be able to print in color again!  Any ideas?

  Hi @Adriana8,

  I see that you have problems printing in color. You have changed the cartridges and have the same results. I want to help you solve this problem.

  Please, try the following steps to see if it will help solve the problem. Ignore the titles of 2nd & 3rd documents.

  HP Officejet Pro 8500 printer - color or black ink prints do not.

  All-in-one HP Officejet Pro 8500 (A909) and Officejet Pro 8500 has e-All-in-One (A910) Printer Series - one "ink cartridge appears to be missing or corrupt" control panel displays error on the printer.

  'The following printhead appears to be missing or damaged' display for HP Officejet Pro 8500 has e-all-in-One Printer Series.

  You use genuine HP cartridges?

  If you appreciate my efforts, please click on the "Thumbs up" button below. Good day! Thank you.

• Office Jet 2130: why isn't my Office Jet 2130 scanning in color, still print in color, (suddenly)?

  I just scanned a few photos in color and have the proper color settings, then I printed a few color photos and now I can't scan in color, yet can still print in color. All cartridges are full. What gives?

  Welcome to the HP Forums @DogenGenjo,

  I'd love to help you with your Deskjet 2130. I see from your description, you are able to print in color, but you can not scan in color longer. I am convinced that I will be able to help you find a solution, and I ask only that pay you it forward. When solve us the problem, I would mark you kindly post as accept as Solution so that others have the same or similar problem can find what worked for you.

  You said that your settings are correct, but I wonder if you try to change your preset scanning if it would work. You have the scan on scan document or scan photo? Can you also check the color scanning settings and let me know what it says?

  While I wait for you, let's run printing HP and Scan Doctor (PSDR) to see if he can help us identify and resolve the issue. You can download the PSDR since the following link: www.hp.com/go/tools

  Please let me know the result of your efforts and I will get back to you as soon as I can. Thanks, I can't wait to hear back on your part.

• HP OfficeJet 4635: HP OfficeJet 4635 printing faces of the Photoshop color photos are reddish

  When you print a photo using Adobe Photoshop, the faces are printed reddish and all the color is darker with funny looking lines throughout the picture.  I tried printing HP and Scan Dr.  It is said that everything is fine.

  Yes, I use HP cartridges, ink is 3/4 full, diagnosis always say nothing is wrong.

  I remove the black cartridge, the vertical lines are now gone.  The color is always a little too red.  I'll try to change the coloring in Photoshop.

  Thank you very much for your help!

• When you print colors of Photoshop gΦre - it seems saturated - Lightroom ok? What is going on?

  Hello

  I am using a printer Epson SC-p600 and printing of photoshop - and I am really struggling to adjust colors when you select "photoshop manages color". Please can someone help? My question is: why all the colors come out badly in photoshop, what am I am I doing wrong? I can get a decent print using Lightroom or choose "printer manages color" - but not "photoshop manages colors."

  (1) when I select "Ps manages color" I get terribly on aspect saturated in the images. Watch the quick comparison here:

  The top printed in LR image seems very close on the screen - PS background image is very saturated - what is happening on Earth? I can't fix it.

  

  Here are my settings: 16-bit RGB, adobe 1998 color space, I select "Edit in photoshop lightroom in the menu" files have the value .tiff and 16 bits and adobe rgb 1998 - what am I doing wrong? :

  I presented my monitor using colormunki display, I chose "PINN_MATTE230_SC_600" which is the book that I downloaded on the site of paper I bought.

  

  screenshot of settings

  

  

  I have set so that epson does not control the colors, because I selected "photoshop manages color".

  (2) when I tried printing in LR, I managed to get colors ok. Here is what I use:

  

  To reset the printing preferences, click file, and then press the space bar as soon as you click on print.

  It must reset the print settings preferences.

  Once this is done, please set the appropriate paper type and profile and then try to print.

  Also, please ensure that you have the latest printer drivers installed on the computer.

• Choosing a color problem Color Library (Photoshop)

  In Photoshop: How do you get the color of in as your choice when the color library does not recognize the number that you type? Ex: I need green Pantone 2290 but recognition stops at 229, which is a magenta color. How do you get around that? Similar problems with colors that are names and not numbers (medium blue).

  2290 C is for example Pantone + Solid Coated V2 library, which can be installed in the libraries of colors in Photoshop and will respond to the keystrokes 2-2-9-0, which is Lab 81 74 - 34

  Here is a great web resource for finding numbers of Pantone colors and color names:

  Pantone colors. Convert Pantone colors to RAL, CMYK, RGB, Hex, TSL, TSL, JSON

  It's a kludge because you must copy and paste values in the selector.

  Now for Pantone libraries:

  So, how do you get the latest Pantone libraries in Adobe products?

  You will need the Pantone Color Manager software. It will export libraries last Pantone for Adobe Photoshop, Illustrator, InDesign and Corel Painter using sRGB or values Lab, your choice.

  Download it here: Software Pantone Color Manager through the integration of the library

  I think that if you register your fan bridges, it is free, if not 49.95 USD

  Hope to see you there, happens

  Gene

• Several weird, sudden problems in Multisim, Ultiboard interface

  I have several sudden problems that arose when trying to review a design that changed, I worked on a couple of months ago.

  Multisim 10.0.343 strangeness:

  1. by clicking on a Multisim, Multisim project file opening, but the project file does not open. By clicking on 'Open' Multisim has the same effect. If I manually open the circuit, the entire project opens as well.

  2. I can no longer double click on a component and change the footprint; the button "Replace" is also disabled. I can always change the footpring of spreadsheet view.

  3. the icons for the placement of the pieces have changed to blue squares with black patterns (from grey buttons with color schemes).

  4. multiple drop-down menus in the top bar disappeared ('reports' is the only one that comes to mind, but the list is significantly smaller).

  5 ' transfer' menu has only one option - transfer to Ultiboard 10. There is no rear annotation or annotation.

  6. Select 'Transfer to Ultiboard 10' open the splash screen for Ultiboard and gives me the option to choose a file name, but nothing opens after that. There is no blocking or error - just nothing opens.

  On a separate note: the last time I did a major revision of this circuit, I changed a lot of net names. NET names, however, has not changed; for example, I renamed a node 'Gsyn' to 'Gs '. The 'Gs' appears in the worksheet view and the properties of the net, but 'Gsyn' always appears on the diagram and is not suppressible.

  Ultiboard 10.0.1 strangeness:

  1. the renumbering of the components in the design menu translates into a sort of re-assignment pad, causing many connection errors.

  2. same mistake earlier in the forums without response: after before annotate Multisim earlier, the list of included changes 'edit the existing component XX' for each component in the design, regardless of whether the component has been modified or not.

  3 when you place a trace which is too close to other tracks by my rules of design, I sometimes get advice 'cannot create (1) drop of water ". The program is then suspended until I click on something other than Ultiboard (show Desktop, switch to another program, etc.) When I go back to Ultiboard, the program of the United-grip Nations - but then it works super slowly, no display of updates for a few seconds and zoom in and out in pieces. I have to close and reopen the file to continue working.

  Any help would be appreciated - I'm on a deadline, and both programs are more or less completely unusable now.

  Hello

  Please take a look at the following knowledge base to resolve the issue of Multisim:

  Making gray out

  Reset the User Interface

  It is difficult to tell what is the problem with the annotation to the front without looking at the Multisim and Ultiboard files. If you can, please create a service request to ni.com/ask and send us the files.

  1. When you annotate forward, the PIN does not change is the imprint that has changed.  If the footprint currently on the design before annotate before is different from the PIN that is in your library, when you transfer annotate, Ultiboard will update the fingerprint with that of your database, this may explain what you see.

  2. you need to compare the fingerprint in your schema with what is on the printed circuit, if the fingerprint matches, Ultiboard will get what is on the circuit board to the wide and place a new there.  Take a look at the knowledge base of Unplaced Pieces after annotate with impatience , he can explain what you see.

  3 turn off the tear drop feature (Options > preferences > PCB design) and carry your board without this feature, once you completed the Board of Directors of routing, add the tear drops (design > add teardrops).

• Printer quit printing text color of HP but still print black well.

  My fine printer of 812c HP just stopped printing, but still black prints color. I replaced the ink cartridge and clean the cartridge but still no color printing.  I tried printing of images and a Word doc but no color printing.  I ran the Printing Troubleshooter and solve this problem, but still.  is someone can you please help me understand why it suddenly stopped printing color?

  Download the driver from the HP support site: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=58152#N230

  Unplug the printer and uninstall your existing driver.

  Restart the computer and install the driver that you downloaded.

  Connect the printer.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Photos will not be printed in color of Windows Photo Gallery

  Last year, I bought a Toshiba laptop with Windows Vista Home Premium.   I never had no problems printing photos in color in color until this week.  Pictures always print well in the color of the internet, inserted in a document, or to a printer test page.  However, they will be print in color directly from Windows Photo Gallery.   They would do so last week, but suddenly, all I get is black & white print pictures in color Windows Photo Gallery.  I even checked to make sure that I have a color cartridge in my HP Officejet 7310.  Does anyone have any suggestions how I can solve this problem?

  Hi Linda,.

  Thank you for visiting the responses of Vista forum.

  It sounds like your print options or preferences have been changed for your printer. To select print options, you must open the document, file, or picture you want to print. Most print options are located in the print dialog box, which you can access on the file menu in the program that you are using. The options that are available to you depend on the program and the printer you use.

  To access some options, you may need to click on "Options" or "Advanced Options" link, a button or tab in the print dialog box. To learn more about the print options for a program, see the information for the program.

  Printing options are determined by your printer capabilities are called printing preferences and may include printing separation pages, color or image quality options and Staples. Like program options, printing preferences are displayed in the print dialog box. Look for the buttons labeled "Préférences" or "Properties". You can choose preferences each time you print a document or preferences to default configuration to use for all documents that you send to a printer.

  To set the default printing preferences

  1. Click to open Printers.

  2. Right-click the printer you want to use and then click Printing Preferences.

  3. Select the preferences you want to use as the default the next time you print to the printer, and then click OK.

  Use print preview

  To see what the print will look like before you print it, open the document in a program that offers a preview before printing. Print preview is generally located in the file menu of a program. You should be able to get an overview of each page of the document. In some programs, you can choose print in preview mode options and then print directly from the preview. In other programs, you will need to close the preview, change the document or your printer settings and print.

  Let us know if you still need help.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• MY PRINTER SUDDENLY STOPPED PRINTING MY PHOTOS.

  First of all, I have a HP Photosmart C4700. I was always able to print photos with no problems. Today I prints then suddenly that my photos are coming in white. So I tried a few times again and again Virgin. I printed something on paper and he fine print, ink and everything. I always use HP ink cartridges. I decided to share those printer for the new pack and I can still print pictures. I'm still using HP Advanced Photo paper. I have troubleshooted this myself, but I have had no luck. I don't understand why suddenly it ceased to print ONLY the photos. Does anyone have any ideas?

  Hello Raineva,

  So when print us the colors, it seems empty, but when we print in black, then only it works. It tells me that there is a problem with the color cartridge. Whether low is causing this not work correctly, or it may need cleaned.

  Take a look at this article troubleshooting Troubleshooting print quality problems.

  Skip to the section titled Solution 6: print and evaluate a diagnostic print quality report and resolve defects.

  When you run the report, see if the ink color doesn't even appear. If she let's try cleaning cartridge before we decide to replace it. To clean the cartridge, go to step 4: clean the cartridges using an automated utility and step 6: clean the area around the nozzles.

   

  
  If after this the color ink still does not work properly you can try to change out to see if the problem corrects itself.

• All of a sudden not printing documents

  II have a fairly new HP OfficeJet Pro 8500 a who has suddenly stopped printing.  I can hear the movement of the print heads and paper goes through, but there is no ink ejected on paper.  All ink cartridges are full and I cleaned the printheads twice.  The test print produces only the pastel colors on the page. not true colors and no black ink.

  All this happened after that AT & T has accompanied me through my router changes to increase download speeds.  I reset my router, the printer & wireless modem, but still no picture.

  Can someone tell me what I should do next?  Having this happen at the beginning of the tax season, maybe it's the worst moment of all.

  Thank you very much.

  In fact, I contacted the live chat and was able to fix the problem by cleaning all the print heads, etc..

  Thanks for your suggestion!