suddenly cannot network with previously networked PC Vista... all settings seem correct
Two PC, this PC Win XP other PC Win Vista. Have been networked perfectly for years. All of a sudden, they recognize each other. Cannot share files or printer. Doesn't have to change settings or install new programs or hardware. Using a Netgear router. When you view the map netwoooork on Vista PC ther is a SWITCH inserted between the router and two PCs. (Win XP PC appears on the map but cannot be "clicked") I do not use a SWITCH.
Hello
- What happens when you try to share files or printers?
- You receive an error message?
You can check this link:
The problems of sharing files and printers sharing
Tags: Windows
Similar Questions
-
The printer (Lexmark x 5470) cannot communicate with the computer (Windows Vista Home Premlum). I tried these solutions below, but it still does not:
1. ensure that the printer is powered.
2 disconnected then reconnected the power cable from the printer.
3 unplugged then replugged the USB cable.
4 checked Windows Firewall setting to ensure the communication of the printer is not block.
5. restarted my computer.
Please help me solve this problem.
Thank you!!!
Have you just tried reinstallling your printer yet? Even if it was working before, file corruption or other problems can sometimes be cured by doing this?
-
Suddenly cannot sync with iTunes or iPhoto
I have synced my phone right of iTunes until I updated to iOS 10.
Since the update, I am unable to sync to iPhoto or iTunes.
iPhoto gives me the error "Pictures on the Filmstrip of < name of the phone > cannot be imported because the device is locked with a password"
It is not locked.
iTunes says "iTunes could not connect to < name of the phone > iPhone because an invalid response was received from the device.
My 5s iPhone isn't jailbroken. The screen is NOT locked. There is NO other restriction on the account access code.
It is my first time, try to connect from the update to iOS 10.
All other threads I've seen on this subject are the 2012-2014 period. Everyone says to restart the phone, or APPROVE this computer when asked. I've done both. Several times.
I'm on an old first generation Mac Pro. I can't go to OS 10.7.5 with it, but have never had any problems so far.
IOS 10 does not work with older operating systems?
Any other suggestions to get it to work again?
An iPhone with iOS 10 requires the latest version of iTunes, 12.5.1, which requires OS X 10.9.5 or above.
-
Cannot download with any browser. Vista 64-bit
I can't download anything. He goes through the steps, but there is nothing. (No, you don't need to learn how to find and manage my downloads.) Previously, whenever I want to download, the web browser would be closed regardless of the browser I use, but I would like to get the download. I am connected to the profile Admin I mainly use Firefox.
I can't open the control panel in the start menu. It freezes up in the Windows Explorer. I CAN open it from the desktop icon.
I use Avast on Vista Home Premium SP2, 64-bit Windows.
I read all the forums I can find and nothing has helped.
If you have not run the File Checker system I suggest you that do so.
http://www.tech-recipes.com/Rx/2231/vista_run_system_file_checker/
Do you need to run it in administrator mode. In Vista just the admin is not enough.
I'm not saying that it is definitely the solution, but it will repair the system files or at least eliminate the system being the problem files.
Colin Barnhorst
-
Storm Smartphones blackBerry all of a sudden cannot communicate with a MicroSD card? Help
I've had my Storm for about a week and a half now. I have Sync successfully several albums of music to my Storm. The other night, I was listening to music on this device and it froze and suddenly couldn't read the files. I tried to format the card only to get a message "Media Card Format failed". In memory, under Media Card menu, it says that "Media Card can not be read. Check that the memory card is formatted. I can not install the media card in the menu as I chose this option only the phone has no effect. I have removed the card as well and has managed to format it on my computer and reinstalled with no other success in the phone recognize the memory card. I also have a 2 GB MicroSD card that I formatted and installed on the phone and I get the same messages with this card as well. Is anyone here can help me with this situation or is my phone call?
remove the battery for 15 seconds, then replace them.
-
Virtual Scrolling functionality works with PDF & Word 2007. He had worked with the old version of Mozilla...
Hello, I do not know exactly but maybe this problem is related to the smooth scrolling feature, which has been enabled by default in firefox 13. you could try turning off again in preferences, advanced, General.
-
Receive error "Scanner not found" messages for HP scan Pro ' 09 and 'cannot be opened because of a problem' for HP Scan ' 09. Printer works. When I try to download the driver/software updates all that I gave is Windows oporating system. Help
Hello
The HP Scan Pro is a very old, destined to Mac OS X v10.5 or older versions of the os.
Don't forget to uninstall any incompatible software by following the uninstall HP under Applications\Hewlett-Pakard program.
Then restart your Mac, enter print & scan and make sure that the printer is listed... If this is not the case, click on the Plus sign and add the printer.
Now, try to scan by using one of the methods below:
http://support.HP.com/us-en/document/c03550518
If there are issues after completing the steps above, please let me know.
Shlomi
-
I can't keep an object with several States to be rasterized text, as well as a slider which is also dithering.
I read that you are supposed to adjust the folio, and article up to be .pdf and the cursor should have the possibility of vector chosen.
I have not found anything to object state multi for these parameters.
What happens is when I exit the folio to Adobe Content Viewer, only the text of these items is rasterized. All other texts to be crispy. Tested on Mini iPad and iPad retina and both are blurred.
Is there a way to force the vector option? It seems even with the selected options it is still screening test in interactive elements.
Thank you!
I don't know if I missed something, but it seems to work now. Maybe the v26 option (I deleted the old folio and recreated, and it works as expected now.)
Can you send me a link to information about the scrolling content and the position of the document? The method I used the frame was from an article of Adobe, although it could be old.
Thanks for your help!
-
HP 6830: HP 6830 cannot communicate with printers
Hello
wehenever I send you a print through my laptop, I get a dialog box indicating that the computer cannot communicate with the printer. (It's also seems to indicate a correction option that is not fix something).
However, the print job is done perfectly.
It dose not happen when an an email impression is made.
How can I get rid of this dialog box?
Thank yoy
Hello
Thank you for using the HP Forums.
Can you try using a TCP/IP port?
Creating a TCP IP port
1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
4. Enter the IP address of the printer.This video resource will show you how do:
Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)
Let us know if it works
-
Satellite M40X - cannot connect with another PC (LAN)
Could not find another computer to the Working Group during the connection with other computers via crossover cable.
All settings are correctly inserted.
That should be a problem? (the firewall is disabled)Connection of local State is connected, but without activity packets (send/recieve = 0)
PS: in the properties of the local area I protocol AEGIS (IEEE 802. 1 x) v2.3.1.10 - what is it?
Hello japke
How can you be sure that all settings have been correctly inserted? ;)
Please check this topic http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3423&messageID=10650#10650. There is explanation how to Configure Peer-to-peer connection.
Good bye
-
Can someone help me with the problem of Vista Home Wireless (unidentified network)
I recently replaced my wireless router and now I get "Unidentified network - Local access" when you try to connect to my network.
This problem occurs only with this computer Vista Home. (All other wireless devices have any problems (Win7 netbook, iPad, PS3, etc).)ipconfig/all shows me a valid ip address, subnet mask and gateway also seems to have a Mac address of zero.Norton Internet Security was installed, but I have removed and still have the same problem.Hello
Position of your router would be suspicious here. How you are positioned in the router? Are there
obstacles in the path?Actually try updating your driver and disabling the network logon.
Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT. Start - Connect To log on to the network.-----------------------------------------------------
Check this box:
Strange problem with Internet under Vista
http://www.catonett.com/blog/archives/194Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233/en-us----------------------------------------------------
And:
Network connection problems
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspxI hope this helps.
-
How to return to the earlier version of El Capitan (from 10.11.3 at 10.11.1) with Time Machine? My HP LaserJet M475dw MFP printer worked fine with previous versions, but fails miserably to recognize the device on the same Wi - fi network now with 10.11.3. I would like to restore the previous version of the operating system without losing any data created in various applications since the 10.11.1. Fortunately, I had only to use Time Machine is rare over the years, I do not know if you have to return the entire drive to the chosen date or it can somehow just go back to a previous state of OS. Any suggestions, much appreciated.
-
Original title: internet connection problem
Hey,.
I use a wireless connection at home, it works very well in my android and apple gadget, but it does not work for my laptop. It is said:
1. Windows cannot communicate with the device or the reaource (primary DNS server)
2. the connection between the Internet and your access point, router or cable modem is broken
3 problem with access point or wireless adapter
I think it's an effects of virus or something? Because yesterday it works really well. How can I fix? Thank you very much
Hello Hildegard Lydia,
You may experience this problem for a number of reasons. Some common problems that can cause these problems are: drivers damaged or incompatible, updates missing, network connection settings, hardware problems or software or TCP/IP can sometimes be damaged or corrupted.
What is the brand and model of your computer?
Please follow the steps mentioned below:
Method 1: a component of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.
I suggest you try to reset the TCP/IP stack.
http://support.Microsoft.com/kb/299357Method 2:
I suggest that you refer to the following link:
Why can't I find a wireless network?
http://Windows.Microsoft.com/en-CA/Windows/cant-find-wireless-network#1TC=Windows-7
Method 3:
See the steps in the following link and check:
Wireless and wired network problems
Please an update on the status of the issue to help you further.
-
Original Title2: Windows 7 - InternetOriginal title: can someone help me?I use a PC at home with Windows 7. Whenever the failure at home, I have problems connecting to the Internet. Whenever I try to go on Youtube or another website, I get "Internet Explorer can not display the webpage." Now, my internet and router are configured correctly, then why is what is happening? I ran Diagnostics and got the "Windows cannot communicate with primary DNS server." I tried to reset the TCP/IP settings. It did not work and I did three times! I tried to check the properties of my network when I went to diagnose the problem, he threw some stuff on the property sheets open and close before you reopen the properties. If someone could give a foolproof solution for this annoying internet problem I would really appreciate it. Thank you.
Hello
Welcome to the Microsoft community!
While using the network troubleshooter utility in Windows, you get message that Windows cannot communicate with primary DNS server.
What is the exact message that you get when you try to check the settings of network domestic?
I suggest you to change network settings:
Step 1: change network settings of the router
a. connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
b. make sure you are in Setup-> basic configuration category.
c. scroll down until you see "DHCP Server" - if it is disabled, select 'enable '.
d. enable DHCP if you want, you can change the number that starts the DHCP IP assigning. (This is optional)
e. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
f. scroll down and click 'Save Settings'.Note: The procedure may slightly vary with different routers. You can see the manual or contact ISP for assistance.
Step 2: change in the computer network settings
a. click on start and then Control Panel.
b. go to the networking and sharing Center and then click on change adapter settings.
c. right-click on connection to the Local network and select Properties.
d. Select Internet Protocol Version 6, and then click Properties.
e. Select obtain DNS server automatically an address and press Ok.
f. Select obtain IP address automatically.
g. Repeat steps for Internet Protocol version 4 as well.I hope this helps. If the problem persists, let know us and we would be happy to help you.
-
I connect a HP all in one Photosmart 5510 to an ATT Uverse wireless network. It says printer is connected and printer tests are all good.., but still when I try to print, I get an error message saying that cannot communicate with the printer, make sure that it is attached to the network?
I restarted services, restarted..., still the same case. It says its connected, but do not connect or print. Very frustrating...
What operating system?
If Windows, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/
What did he say?
Maybe you are looking for
-
Having problems connecting iPhone 6s for iMac with OS Lion
Hi all. I have an iPhone 6s and a mid-2011 iMac that is still running on OS Lion. When I connect my iPhone, I get the message "the iPhone is useless because it requires a newer version of iTunes." So I checked that, and I am running the latest versio
-
Is there a software to turn my pc into a virtual mac
-
Veriton M2631 - I want to upgrade to power 300 watt, need help.
Hello I'm looking for a 300 Watt power supply which made / work in veriton M2631 case. Is there a classification or a size indicator that I should look for? Is there a list of compatible power provides a place where nobody knows of any brand/models
-
Photosmart D110: Photosmart D110 don't wake up
My HP printer will not wake up to print from my computer. If I restart the printer, I can print from my laptop. I can get one or two impressions, but if I wait a while he won't wake the printer to print. The printer is connected to my wifi. Can I pri
-
MMC could not create the snap-in when you run the Scheduler of tasks or event viewer
Event Viewer and Task Scheduler are not running. Error returned is: mmc could not create the snap Someone knows how to solve this problem, I searched and tried everything I can find and it still doesn't work. can someone tell me the conditions requir