Photosmart D110: Photosmart D110 don't wake up

Similar Questions

• computer goes to sleep as soon as the ethernet cable is plugged in and don't wake up

  When the ethernet cable is plugged into my pc, it immediately goes to sleep and don't wake up without a difficult start. As long as the cable is connected, the computer will not load windows, immediately go to sleep before my desktop appears. My laptop is connected wirelessly without any problems at all and when connected with a cable, no problem either. ISP says it's a pc no matter not a modem problem, there is a conflict, but they don't know where.

  I am running windows Vista Home Basic, a cisco modem, do not know what model.

  Any help would be appreciated.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to check the parameters of the power management of the device on the network adapter.

  To correct the settings please follow these steps.

  (a) click Start, type device in the box start the search and then click on Device Manager in the programs list.

  (b) in the user account control dialog box, click continue.

  (c) in Device Manager, expand network adapters.

  (d) right click on the network driver and then click Properties.

  (e) click the power management tab.

  (f) click to uncheck the checkbox allow the computer to turn off this device to save power , and then click OK. If the option is checked, then uncheck the option and apply the settings.

  Once you have performed the steps, restart the computer so that the changes take effect, and then check the result.

  Hope this information is useful.

• P1606dn don't wake-up car for new print job

  I have my printer is on my home network.  I use Mac computers.  I can print to the printer on the network of my three laptops more wireless, however, if the printer goes into sleep mode and I have send a new print job the printer don't wake auto.  To print, I have to manually turn on the printer, then it prints.  What is the solution to wake up off car for a new print job.  My old Brother printer would do that and it's maddening to have to go up the steps the Office to turn on the printer whenever I want to print.

  Hello

  The auto power off feature completely disable the device until a print job come back on, however, this requires a direct USB connection.

  For the network connection, you must disable the auto power off feature, the printer will always enter a power saving mode, but should be up and running once a being sent to throguh the network print job.

  Follow the steps below to disable the automatic mode:

  http://support.HP.com/us-en/document/c02860533

  Please let me know if this is useful,

  Shlomi

• Photosmart D110 don't not print Quicken checks since installing Windows 8.1

  I upgraded to 8.1 Windows and had to reinstall my printer driver for my printer and scanner working again.  Now it works fine most of the time, but is no longer print checks from Quicken.  It's weird because I can print a test page on the printer Quicken configuration page, but when I try to print checks, the printer starts moving, but just stops and goes back to the loan.  There is no print job in the print queue.  Any ideas?

  Sorry - it's: https://qlc.intuit.com/questions/783132-printing-and-windows-8-1

• Photosmart C309a don't scan

  My C309a don't scan:

  -When I press the button on the printer, it is said there is a problem of scan and told me to "try to start the scan of the computer, refer to the documentation for more details"

  -When I open the HP solution on the Office Center, it says it cannot run because "your device isn't complete... Please connect the USB cable or re-run the form progam setup from the installation to a network installation CD... If it does not complete the installation or you do not have the CD to access the HP help files by clicking on the start menu.

  -J' uninstalled and reinstalled the software from the CD - it did not work

  -J' downloaded the new drivers from here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3737193&...

  -J' tried and then install the device. I clicked the USB cable option, rather than wireless or ethernet options, and when I clicked 'Next' he told me to check the cable USB is plugged in and the unit was powered. he wouldn't let me go forward even if I put the computer turned off and removed the USB cable before trying again and reconnect them

  -l' printer prints perfectly fine USB cable... it's not just scan!

  -I had not moved the USB cable to a different USB port... still no joy

  I'm out of ideas

  In response to my own Announces 1/2 day later.

  HP Photosmart C309a will not computer scan.  The HP Solution Center does NOT open.  Can print but cannot open the HP Solution Center and command the C309a to scan a document.  Using Windows 7.  Tried to download new driver and also used the original installation disc without success in the restoration of the HP Solution Center that is used to control the printer to perform analyses.

   

  Click the Start button on windows at the bottom left

  Click "all programs."

  Clicked on "HP".

  Under "HP" clicked "Photosmart C309a Series"

  Click 'add a device '.

  A program was launched which has detected my existing C309a and when he was finished the HP Solution Center has been restored to its previous working state.  I did this using the wireless connection.  I always have not plugged the laptop in the wired connection on my desktop that I don't want to get out of this comfortable chair and address this issue more. He now works in wireless mode, and that's good enough for now!

• D110 don't scan, it will copy and print.

  OS of Mac OSX 10.7.5.  I uninstalled the software and downloaded and installed the current HP software "s Web site (don't know if I have one d110a or d110b). Still does not scan.  Help, please. D110 screen says 'try scan from computer or see the documentation '.

  Have you used these drivers on this site?  Download the drivers and full software.  Try now.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=4023245&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=4023244

• HP Photosmart C4680 don't scan

  I have a HP Photosmart C4680 that does not scan. It can print and copy things perfectly, but if I try to scan, it gives me an error message saying "error analysis. Try scanning from compurter or see the documentation. I've been watching other messages of the forum with similar questions, but can't find what they describe on my computer.

  I am currently using a Dell with Windows 7 computer.

  I don't know, but this could be the result of the disc it came with the impossibility to install (it says only Windows XP and Vista).

  Help, please!

  Hi Rsodd,

  Follow the steps described in this document.

  http://support.HP.com/us-en/document/c02450835

• Photosmart B8550 don't XL ink cartridges require the purchase of a larger car to keep them?

  Photosmart B8550

  Envy, I decided to buy the XL size cartridges because printing photographs uses ink so fast. But looking at the regular size cartridges, installed in the current cage, I don't see how something bigger can fit in there!

  Which brings the question: do I need to buy a XL wagon to keep? And if so, where can I find them for sale, as so far, I have not found their...

  Or... is this just HP does not have regular ink to full capacity, and the difference represented by an XL is simply it is actually full of ink, rather than only partially completed as in the case of a regular ink cartridge?

  Thank you!

  I said cart but meant the "printhead" that holds the ink cartridges.  I also had my answer elsewhere. The standard and XL ink cartridges are the same size, so they both correspond to the same print head.

• HP photosmart 7510 don.t print double-sided automatically auto option not available

  I check the devices, and although my printer has the possibility of two side attached, it says no option 2 faces.

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  E-all-in-one printer - C311a - drivers HP Photosmart 7510<- set="" to="">
  version of Windows.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5070121&LC=en&cc=us&DLC=en&lang=en&cc=us

  Photosmart HP printer 7510 e-all-in-one - C311a - support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=5070121&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP photosmart c4680 don't scan to Mac

  I have a hp photosmart c4680, the functions of the printer and copier are working well. However, it will not open scanpro and does not scan documents or photos on my Mac. I uninstalled and reinstalled the printer and still the same issue.

  Hello

  As you mentioned that you have the HP Scan Pro application, the software is not intended for OS X 10.6.

  Make sure you completely remove the software as follows:

  * Please note that the following steps will delete all HP software installed.

  1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
  2. Select Applications
  3 select the Hewlett-Packard folder
  4. double-click on uninstall HP application
  5 follow the uninstall to prompt to select a device to uninstall
  6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
  7 approve any prompt to uninstall all HP software.

  Next. Download and install Snow Leopard software below:

  http://FTP.HP.com/pub/softlib/software11/COL27838/MP-69219-2/PS_AIO_05_C4600_NonNet_Full_Mac_WW_108.dmg

  After completing the installation. Make sure to restart the Mac and install the updated HP by ringing the Apple icon and the software update.

  Kind regards

  Shlomi

• Photosmart C4480 don't scan

  After using the C4480 a year without problem it suddenly doesn't scan.  I have a MacBook with OSX10.5.8.  It prints but won't copy or scan.

  The scan function closes and start-up instructions by default.  If I try to scan from the printer, I get the message to try to scan from the computer.  Nothing happens when I copy.

  I have:

  unplugged the C4480 off my MAC, everything turned back.

  b. uninstalled the driver, downloaded the driver from the HP site, reinstalled

  It still does not work.

  Any ideas?

  I fell on the map because I got exactly the same problem. Another thread has provided a suggestion and it worked for me.

  -Download the full software from HP Photosmart Aio for Mac OS X features. It's the HP Suite for Mac. It will probably look a little bit different than what you currently have installed (it was for me). It can be found here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?lc=en&cc=us&destPage=softwareDownloadIndex&lang=en&softwareitem=oj-74785-1&os=219&product=3418705&=

  -Once installed, unplug the power cord at the back of the C4480 for a minute.

  -Plug it in again.

  -Launch HP Scan and am trying to scan a document or photo.

• HP Photosmart D5360: don't know where to find the DSL cable to the printer

  I downloaded the drivers for my printer and I can't find the USB to plug in.  There is a cable connected to the printer, but I can't find where to plug them.

  Thank you

  Try this

  Printers HP D5360 Photosmart D5345, D5363 and D5368 - commissioning

• Photosmart c309a don't copy or print

  All-in-one Photosmart c309a printer not copy remotely or print any of the programs on my pc.  It will however print alignment and test pages when I tried the troubleshooting by HP solutions centers, troubleshooting guide.  I can't even print when the printer is not connected to my pc.  All the ink levels are okay.  Any ideas?  Thanks in advance for your help.

  Thanks for the reply. If the blank pages issue persists after you run the utilities mentioned in the first post; I would like to look at this document here. It will address the printer print blank pages and provide troubleshooting steps to try to solve this problem.  Regarding the USB error message, I have a few more questions to ask. What is the exact error message? Appear on the computer or the screen of the printer?  What is the operating system of the computer you are using with the printer?

• HP photosmart 4480 don't print from my laptop

  I am not able to print from a laptop, but the other laptop prints very well. All I get is "error - printing" message. It has never printed on this computer. I use Windows Vista Home Premium Service Pack 2 on a Dell XPS.

  Hello elkaydub,

  Welcome to the Forums of HP Support! I see that you have not been able to print from your computer on Windows Vista on your HP Photosmart C4480, you get a "error - printing" message.

  I would like that run you HP print and scan doctor- it was designed by HP to offer users the features and troubleshooting problem needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  If you run the PSDR and still can not print, please continue here: print jobs are stuck in the print queue

  I'll watch for your reply.

  Thank you

• Photosmart C4400 don't scan

  I just connected a HP Photosmart C4400 on my mac mini with Mac OS X 10.6.2.

  Printing works fine but when I try to scan I have a message "unknown error."

  I tried reinstalling the software a couple of times without success.

  Is it possible to get this all-in-one to scan?

  Where have you installed the software?  If it's from the CD for the printer, it is for 10.5 and earlier only.  Uninstall in this way:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

  You do not have the software now since Snow Leopard as well print & scan drivers built-in. scan from Preview apps or Image Capture. Scan from the front panel of the printer does not work yet.