suggestion: manual rotation

Similar Questions

• Suggestion: Manual available

  I'm the only beginner who would like a manual, available?

  I like Adobe software, but the aid system is incredibly anti-intuitive IMHO...

  The document links are updated now.

  Thank you

  Sanjit

• Portege M400 - screen rotation utility does not

  A week ago, I turned the screen to put in tablet mode and noticed that the screen does not rotate 90 degrees automatically as it normally does.

  I then pressed the button of the screen rotation so that it would automatically adjust to the direction that the laptop was in. This had no effect.

  I was able to rotate the screen manually by going to the graphic properties and you can set up hotkeys to rotate manually onscreen, but is no longer automatically adjusts. I ran the utility of toshiba manually rotation, but it doesn't have an effect either.

  Does anyone have any suggestions?

  Hello kjames

  Try again with the official page of Toshiba support under http://eu.computers.toshiba-europe.com > support & downloads. It's the Rotation Utility for Windows XP Edition Tablet version 4.00.00.06.

• Windows photo photos automatically rotate Gallery

  I opened the Windows Photo Gallery for the first time today and to my surprise, I saw all my photos in the program!

  The problem is that none of them have been rotated. I see in the options I can automatically rotates images during the import, but all these images are already in the photo gallery.

  How do I automatically rotate all those images now?

  CTC

  Hi ctctc,.

  You can use this feature when you connect the camera to the computer to transfer pictures to the computer.

  If your camera can detect whether you take pictures vertically or horizontally (usually using a sensor that can tell how the camera is oriented), your computer can automatically rotate images in JPEG format to orient it correctly when they are imported. If you use this option, you will not have to manually rotate pictures that appear sideways on your computer, and it does not affect the quality of the image of your photos.

  To turn on the automatic image rotation

  1. open the Windows Photo Gallery by clicking Start , allprograms, and then clicking Windows Photo Gallery.
  2. click on the menu file and then click on Options.
  3. click on the import tab.
  4. check the rotate pictures on the box import and then click OK.

  For more information please visit the link below
  Windows Photo Gallery: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Photo-Gallery-frequently-asked-questions
  However, you can also rotate the photos that are already available in the windows photo gallery by opening each picture and by turning manually.

  1. open the Windows Photo Gallery by clicking Start , allprograms, and then clicking Windows Photo Gallery.
  2. click on the image you want to Rotate.
  3. click on one of the rotation buttons to rotate the image 90 degrees to the right or to the left.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Panoramic rotation hangs or gives the "result will be to the great" despite the abundance of assigned unused RAM.

  It's 32-bit Elements11 and Elements13 64-bit for Windows.

  I do a lot of panoramas from several photos glued together with Photomerge function.

  When you try to set the slope horizont after merger with manual rotation I get the error "the result will be big" in 11 items on both Windows Vista 32-bit and 64-bit Windows of 8.1.

  8.1 winning RAM max preferences of use was set to 100% 11 elements being only 32-bit program and don't recognize 3Goctets - but I have 8 GB installed.

  When I select the elements of function "Rotate-> Autorotate" stands forever cpu consumption but it never ends the function (at least 30 minutes).

  So, I bought and installed 13 elements version on 64-bit Windows, to 8.1 since Elements13 is 64-bit and should be able to use more RAM available.

  But the same thing is happening here, I adjusted the preferences to use 85% of the 8 GB of available RAM but elements exceeds not using the the / 3Gb and stalls autorotation the same image.

  Autorotation is to always consume cpu power but does never extend the use of the RAM and never complete the rotation.

  The I am Image editing is saved without layers in a flat file jpg and 30Mbyte only in size, but the element points out (in the bottom of the picture frame) to be around 500 MB internally when opened for editing.

  Why do Elements13 not use all the RAM I assign in prefs, and why the items 11 and 13 stall autorotation without giving an error message appropriate?

  And why 13 elements in 64-bit version running on Windows 8.1 in the 64-bit version fail to autorotate or "manually turn" this relative small jpg 30 MB even when file?

  It is possible that has nothing to do with pse not really having enough ram, but the size in the size in pixels of the pano himself.

  As the editor of photoshop elements has a size limit in regards to the pixel dimensions which can be an image, 30 000 30,000 px x px, if you pano is close to this limit, rotation will add to the pixel dimensions

  and so possibly put the pixel dimensions exceeding this limit and this is the reason for the error "the result will be great."

  If you have to Image > resize > Image size, what are the Pixel Dimensions of the pano before trying to turn it?

• Tool rotation with precise angles

  Hello

  I am trying to use the Rotate tool to place the pivot where I want, but I don't want to manually rotate the object, but a precise amount of degrees (i.e.: 30 deg)

  Is this possible? When I double-click on the tool, the pivots back towards the center of the bounding box, and this isn't what I want

  Thank you

  DEVELOPING COUNTRIES,

  It does for me, as it does for your.

  Are you sure you AltClick/OptionClick?

  If you do this, the dialog box where you can set the angle should appear.

  Edit: Hi tone.

• Log rotation

  Hello
  
  We monitor our logs with multiple scripts, however we we see an inconsistency with the time new logs created as access and error. We would like to create a new file every day at 12:01 and should end at 23:59.
  
  Please let me know if anyone knows how to do it with some parameters of the DS.
  
  Thank you, John.

  Just a few remarks:

  (1) cutting log files expected to not be a problem because they didn't get physically deleted but only trimmed. This means that no physical operation unlink() is done at the file system level, which could cause problems for the process of the DS. But in any case that Chris was mentioned, this can lead to uncertain status, so this is something that should be avoided.

  (2) with respect to the rotation of log files: it must manually rotate at midnight (stop DS, move/rename the access log, restart the DS), as additional file rotations are calculated based on the Aging of the current log file (you can see in the first line of access.rotationinfo)

  (3) the mechanism works for successive rotations: I tried it with the rotation policy the access log every 1 hour... Last log rotation before setting the policy that happened at 18:13. When the server reaches the end of the hour (7 pm) it does not turn the logs up to 19.13.

  (4) remark: If nothing happens on the server side (no read/write operation is done) the server didn't need to write in the log file, if the rotation does not arrive until there is nothing to write.

  hope this helps ;-)

  Rgds,
  Marco

• RX 100 Macro

  1. how to access quickly the Macro mode?
  2. the auto focus is not available in Macro mode? The manual focus mode is a little confusing to use/then compose.
  3. can I assign my Macro mode settings for quick access to the Macro and then return quickly to my P mode?

  4. I have to say that the manual is terrible, and the generic videos are pretty useless. Sony should pay attention to users of this device very expensive, but sweet.

  Hi 986598-USER... I'm one of the trainers of digital imaging in the Canada, and I think I can help you with some of your questions.

  The RX100 is ideal for close-ups of the Macro and there are several ways you can do. Pardon my numbering scheme is not your questions...

  1. dedicated Macro Mode - spin mode selector t the SNA mode selection, then use the directional control up/down to search for the macro icon (little flower). Once selected, you will now be in fully automated mode designed to close.

  2. Macro switching fast - if throwing himself in the scene mode menu and find the macro is too many steps to quickly find the macro mode, you can easily assign your three custom modes of MR (memory recall), quick access to macro.

  To make this selection mode Macro, or set the camera settings however you prefer, then press menu and look in the menus of settings 'memory '. Select it and it will bring you to a settings screen black with '1', '2' and ' 3' at the top. These are your slots available for custom modes. Use left/right on the rear wheel controls to select 1, 2 or 3. Once you select the desired location, follow orders of the screen to confirm. Now the settings in that you compound will be saved in numbered MR slot you have chosen. To switch quickly between priority to another, such as P as you suggested, just rotate the above MR control dial and select the corresponding number and you're there.

  I find using custom modes of MR particularly useful when shooting with the auto HDR function or when using image effects. I prefer to shoot in RAW format, but the HDR and image effects must be in Jpeg format. Instead of having to go, in the menu to change the JPEG quality momentarily and then again for a quick shooting creative I dedicate a MR slot to do this. This way I can RAW, but if I want to take a quick shot with effects or HDR I just turn the stem of the wheel and turn quickly to M-priority where my choice of RAW is preserved.

  3. the RX100 is always in macro mode! -You can use the dedicated macro mode which increases the bokeh (background of-focus) effect, but this mode is automated for opening/shutter and ISO. I would like to have full control over these exposure settings when I shoot so I shoot most of my stuff in macro manual priority or shutter priority. With an incredibly short development of 5cm, it is the wider focal length the RX100 is able to shoot macros fabulous in any mode you choose. It is designed to attract basically, dedicated macro mode is only a quick guide with some automation. Try to get close in P mode and see what you get!

  4. disorientation MF Assist mode - it is a very useful feature for the fine development, but when you are already very close, when the pleasure that it can a little difficult to 'see' what you are framing. You can disable this tool by entering you menus and by disabling 'MF Assist.

  5 AF in Macro mode? -Yes, the dedicated Macro mode is always with autofocus. If you shoot in P, A, S, M, you can enable or disable the AF options. I prefer to use M or S with active DMF. Direct manual focus is the best of both worlds... it gives you of AF, but also allows you to refine the results before pressing the shutter button completely. So, you get the convenience of autofocus, but can also add personal control to refine your focus by simply adjusting the front control ring. It's different than standard AF because the lens decides what is right downtown, and causes any attempt to manually change the lens fight your setting to refocus its ideal point. The AF is really good, but sometimes he needs a little help and with DMF, you have all the control.

  I hope that some of this aid... Sorry if it was a bit of reading. Please let us know if you have any questions about what I said!

  Now, get out there and shoot a few macros!

• updates show only not in programs

  Hello
  I have problems with the media center and media player on Vista Home premium. His research as corrupt files somewhwere along the line so I want to remove SP1 and reinstall it.
  Problem is that when I go to programs of the Control Panel, it shows no updates (Yes, I clicked on see the updates and it says no updates installed). I tried to install SP1, and he said: it is already installed.
  I have many other things go wrong like below

  media center does not start, said components are missing
  Media Player will not properly play video files, comes up with an error indicating that the file is in use, the file opens in the background without the sound and the only option in the error box is to close.
  System Restore does not work (do not remember the error message)

  All ideas welcome even if I do not see anything other than a clean install sort this one.
  Thanks in advance
  Shep

  Hello Shepturley,

  Thank you for using Microsoft Vista answers Forum!

  First of all, I suggest manually, download and install the SP1 update using the link below and if this does not solve your problem, I would say go ahead and repair Windows using the Windows Vista installation disc

  Download SP1

  Windows Startup Repair

  If please reply and let us know if your problem is resolved or if you need further assistance.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• has tried to fix the 800f0825

  Did what you said but didn't this really important code for KB955430 window vista work? Do I really need it, what is it for?, and they give for me once again, as it is in the list of updates that have passed through and failed. Thank you

  Hi sallybeenp,

  Thank you for using answers Forum.

  There is a large list of items that are updated at this link:

  http://support.Microsoft.com/kb/955430

  If the update is not installed, it will probably reappear in the list of updates.

  I suggest manually download the update and manual update installation files.

  Here are the links for downloads:

  Download Vista - 32 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b1746a64-2bb5-4058-B133-d8264a0122cb

  Vista 64-bit-
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=f8db990c-9136-4332-8c16-1bd79a1559d3

  I suggest that you temporarily disable your anti-virus and spyware/malware software while performing the update.

  Give that a try and let us know how it works.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Yellow shield in the taskbar - Windows found 1 update

  I have a yellow shield appear in my sandbox.  When I click it, it says "Windows found 1 update.  This update requires that you accept first the terms of the license. "This is the first time I see this, because my updates are usually automatically installed.  Is this a virus any?  If so, how can I get rid of this shield?

  Can't blame you for being hesitant.

  Suggest manually, you go to the update site and see what's available for your system. Which should give a clue as to what is pending installation, or in the alternative, see windowsupdate.log.

  How to view the log of update Windows: -.
  
  Click Start and then click Run.
  In the Open box, type: %windir%\windowsupdate.log
  and then click OK.

  Scroll down for the latest entries.

  Still in doubt, perhaps one of the experts here could focus on this issue to determine if it is in fact an update legitimate windows or something else.

  http://supportservices.Microsoft.com/support/services/windows_update

• Aspire installation Ubuntu V3 - 772 g problem

  I recently bought an Aspire V3 - 772 g and I now want to install Ubuntu as second operating system. I've already replaced Win8 with Win7 and reconfigure the disk on the MBR instead of TPG to do and also disabled Secure Boot and switched to Legacy Boot.

  I had the image of Ubuntu 12.04 official website and created a Live USB Stick using Unetbootin. I installed Ubuntu with Win7 on my desktop already using this stick and had no problem with it.

  I can start my netbook with this stick and get into the menu where I can choose between installing Ubuntu, trying without installation, etc, but then the problems start. As soon as I press any key on the keyboard, the laptop freezes. The LED on the USB key stops flashing and remains lit permanently in place. When I left the countdown number down to zero, to make it use the default selection, a cursor flashing ("_") appears below, but other than that nothing happening (the USB LED also on stying apartment). In both cases, I have the laptop manually for use again at the stop.

  Anyone have any idea what the problem might be or suggestion/manual to install Ubuntu on Notepad using any other way?

  (I already consider switching to UEFI/GPT, but before I resort to such drastic methods I wanted to try to find something less scary)

  Apparently, the problem was really the unetbootin bootloader. I was able to install using the stick life of Rufus. Always had a small problem with a black screen (solved by 'nomodeset') and gparted/Ubuntu-install not seeing my existing partitions (because Windows is not able to convert correctly on the MBR... corrected through this), but now it seems to work smoothly.

• Problems with HP Photosmart C309g wireless and wired

  Hello

  I fought with my C309g since I bought it a few months before.  It works on and outside, but can not hold a consistent network connection.  I have wired it usually but have tried both wireless.  It is plugged directly into my Netgear router.

  Before it works for a short period of time and the other Offline Online & on its own.  Sometimes it recognizes the other computers on the network to print & analyses.  I have 3 PCs on the network - two cables & a wireless.  It will recognize the three rarely, two of them sometimes, one of them sometimes (usually the laptop wireless) and none of these most of the time.

  There each time than in quite awhile for the first month and now it does not appear at all on the network - wired or wireless.  I can't print and more.  The documents simply to sit in Quebec for a while and then produce an error.

  Any help appreciated.  This printer is a wholemeal bread.

  Thank you

  Gringeiro

  Hi Gringeiro,

  You use the wireless WEP or WPA security on your router?  I would recommend WPA2 with AES, well, if you want to connect wireless.  It will also, if you set a static IP address on the printer.  You can do this by typing the IP address of the printer in the address bar of your browser.  Select the network tab, and then look for IPV4 under the section of wired or wireless, depending on how you have connected it.  There should be an option to "suggest manual IP".  If this isn't the case, type IPCONFIG from the command prompt (start/run cmd) to get your addresses in the subnet and the gateway.

• 8024200d error code when you try to download/install Service Pack 1 for Vista Ultimate.

  Have you tried several 'solutions '. Anyone would be able to give me a direct answer?

  Error 0x8024200D code is:
  SUS_E_UH_NEEDANOTHERDOWNLOAD
  The Setup program requires more data to download

  Suggest manually download you the complete file (for single PCs too) and install the same-

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/
  Method 3: Get the latest Windows Vista service pack from Microsoft Download Center

  
  FYI learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

• Try to copy something, but he needs administrator permissions

  Original title: vista problems

  I tried to copy something, and it requires administrator permissions to do so. But I m admin, but he needs him again. That ot?

  Hello

  Are you facing this problem on the specific file or all the files on your computer?

  I suggest manually apply permissions to a file or folder before you face, follow the steps below. Manually apply permissions, it's something that only advanced users should do because you could end up with unexpected results.

  (a) click on file or folderand then click on Properties.
  (b) click on the Security tab, and then click Edit.
  (c) to set permissions for a user who is not listed under group or user names, click Add, type everyone in the name of the user or group, click OK, select the permissions, and then click OK.

  For more information, visit the below mentioned link.
  What to know before applying permissions to a file or folder

  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

  It will be useful.