superposition of fusion problem

Similar Questions

• Fusion problem

  I merged 15 NEF files successfully but the image is very very bad. I don't know how to describe (but pixelated is a word that come to mind) so here's a screenshot

  

  And when I export to TIFF using these parameters...

  

  That's what I get when I open it in PS

  

  Here is a close up view

  What I am doing wrong?

  Thank you

  Lisa

  One number of other reported this issue in this bug report in the official feedback forum Adobe: lightroom panorama of merger creates a small image combining images 13cr2. Please add your vote and the details of your problem to this report, including the exact version of LR, you're running (help > System Info - do not rely on memory).   Used Adobe Simon Chen said on this subject than 6.2 LR / 2015.2 CC contains a workaround solution that should avoid this problem.

  Better to continue the discussion in this thread, where it will be visible to Chen and the other who has the problem.

• Oracle 10: fusion problem

  To ext_mitglied I want to insert ort, please, in tbl_adresse strasse. And I'll do it with fusion. The values do not currently exist in tbl_adresse. But Oracle says that the uq_adresse of the unique constraint is violated.
  
  I don't see where is the flaw. ?
  
  CREATE TABLE tbl_adresse
  (o_id Number (15) NOT NULL,)
  TRO varchar2 (30) by DEFAULT NOT NULL, 'Berlin '.
  Please number (5) NOT NULL,
  VARCHAR2 (30) Strasse NOT NULL,.
  Pk_adresse CONSTRAINT PRIMARY KEY (o_id).
  CONSTRAINT chk_plz CHECK (please > = 10000).
  Uq_adresse of UNIQUE CONSTRAINT (ort, please, strasse)
  );
  
  CREATE TABLE ext_mitglied
  (
  m_Id Number (15),
  TRO varchar2 (30),
  Please number (5),
  VARCHAR2 (30) Strasse,.
  m_anrede varchar2 (10),
  m_vorname varchar2 (30),
  m_nachname varchar2 (30),
  kto_nr number (10),
  BLZ number (10),
  date of geb_datum,
  tel_nr varchar2 (30),
  start date,
  date of Ende,
  number (1) have
  )
  
  Tbl_adresse of MERGE IN one
  With the HELP of ext_mitglied ex
  WE ((ex.ort=a.ort) AND (ex.plz = a.plz) AND (ex.strasse = a.strasse))
  WHEN NOT MATCHED
  THEN INSERT (a.ort, a.plz, a.o_id, a.strasse)
  VALUES (seq_ort. NEXTVAL, ex.ort, ex.plz, ex.strasse);

  Instead of

  USING ext_mitglied ex
  

  You might want to try:

  USING
    (select distinct ort,plz,strasse
     from ext_mitglied ex)
  

• Saving AVI with overlay... slow... no work around?

  Hello

  I couldn't find clear answers so I'll just ask here

  My application should do the following:

  1 - Take a picture of the camera

  2. Add the overlay (overlay consists of dynamic elements)

  3. view image in an external window w/overlay

  4 - Save AVI with overlay

  The most important thing is that the external window showing the overlay and the picture has a high refresh rate. Here's the code for that: (wow it's pretty huge...) I'm sorry about that.,.)

  

  First of all, it captures an image of the camera. This grab function removes all overlay that was there before (blaeh.). Second, a manifest error is used (Im lazy and did not include errorhandling.. yet), third, every 200ms (the loop runs at 20 ms) dynamic overlay items are updated on my own overlay image. The reason why I use a clean to the overlay image, it is I want to minimize the redefinition of the static elements on the overlay. Fourth - copy the overlay of my image of static overlay to the image captures. Fifth - display the image in an external window. Sixth - set reference IMAQ for a func. overall.

  This loop runs perfectly. The reason not to use 'merge the overlay' here is this is going to slow down and mess with the frequency of update...

  Second, the loop saves the AVI file:

  

  Firstly - the global Func is red with the ref IMAQ with image captures and layering.

  Second - this IMAQ image is duplicated. Why? Well, if the superposition of fusion will merge the original IMAQ image, it would be sort of slow down to the top of the screen external (and who becomes jerky) (betai, beats me why this happends)

  Third - the overlay is merged

  fourth - the merged overlay is saved.

  Now what happends is that this economy is just way to slow down (but doing it like I did, is not mess with the frequency of update of the external screen) and all this has something to do with the overlay of the merger. If I disable merging, everything is fine - but the video doesn't show any recovery.

  Here's an example of how the overlay may look like:

  

  Someone at - it no clues how can I further improve this to be faster? My AVI file gets as hectic mega when overlays that merges like the picture above!

  Cheesy Hi,

  It seems that your problem is perhaps (cannot tell from the screenshots) that you copy just a reference to your image that you use to enter into that your another loop draws from. The problem there is that you would have a synchronization problem, wherever you use the image in your AVI loop you will change this image even when it is acquired in. A simple change would be to have your Grab acquisition in loop in a local image and copy only in the world. Then you could have your copy loop AVI of this image before proceeding with any treatment. This would ensure that the image is write-only in a loop and read-only in the other, and more to ensure that these access are atomic with respect to the other (given that the copy is blocked images during the operation).

  Eric

• Got erro 'We couldn't create a new partition.' installation Win 8 via bootcamp

  I was installing Windows 8 pro via bootcamp on an iMac with the new installation of recovery.

  It's my fusion drive before installing windows:

  

  However, I got the following error during the installation of Windows 8 pro via Bootcamp, even though I formatted disk 0 Partition 5 Bootcamp:

  We could not create a new partition or locate an existing one. For more information, see the Setup logs files.

  

  So I have to quit Setup and go back to Mac OS X and delete the Windows via Bootcamp partition:

  

  

  Can I ask you why windows cannot be installed on this partition formatted? and how to fix this?

  (I just picked up the iMac to a disk fusion problem before installing recently: El Captian is not installed on the part SSD disk fusion after recovery of the internet)

  It's frustrating because I installed Windows 8 successfully via Bootcamp when I received the new iMac earlier.

  Advice and emergency aid are necessary!

  Thank you!

  When you say that you have formatted your Windows partition, you format you through installation of Windows (2nd screenshot)? To this screen that displays all partitions, you have chosen the one you want to install to and then click on Format for the Windows install process can format NTFS?

• OVFTool: Unable to load OpenSSL libraries

  I ran the OVF tool command-line as sudo

  I ran the OVF tool command-line as sudo because I have running me would be the bomb while trying to open the .vmx file.

  I ran into sudo in the OVF tool download full and OVF tool through merger.

  Fusion 7.1.1

  #sudo. / ovftool - acceptAllEulas/Users...

  I received the following error message. Any help is appreciated.

  I see the crypto.1.0.1.dylib in the Director. The permissions seem to be good.

  SSLLoadSharedLibraries: Unable to load OpenSSL libraries. LIBDIR is Fusion.app/Contents/Library/VMware Applications/VMware OVF tool/lib

  VMware Fusion error:

  Could not open the file "/ Applications/VMware Fusion.app/Contents/Library/VMware FVO Tool/libcrypto.1.0.1.dylib" for read access: the file is not found.

  Fatal error VMware Fusion: (vthread-4)

  SSLLoadSharedLibraries: Unable to load OpenSSL libraries. LIBDIR is Fusion.app/Contents/Library/VMware Applications/VMware OVF tool/lib

  A log file is located in ' / var/root/Library/Logs/VMware/vmware-ovftool-975.log '.

  You can request support.

  To collect the data to submit to the VMware support, choose "Collect Support information" in the "Help" menu

  You can also run 'VMware Fusion problem Reporter.tool' inside the bundle of VMware Fusion application directly.

  We will respond on the basis of your entitlement to support.

  Problem solved... I don't have the full path.

  I posted the resolution on VMware Fusion 7.1.1 OVF tool error + slipped & | common refusal

  because the resolution is to drop and drop the file and folder and you won't work in my question again once.

  Also... no need to run as sudo

• Light parasite endangered!

  I have a lens flare on a black layer with mode on the superposition of fusion.

  Whenever I have Merge visible, flatten the image, or save the image in JPG or PNG disappears from stray light!

  I tried to rearrange the order of the layers, try different blend modes, but that did nothing. I have reset the preferences (shift, opt, command at startup) with no luck.

  What is going on?

  Thanks in advance for any help!

  In addition, the brightness and contrast slot, Image - Adjustments, does not work. I mean, I adjust the brightness and contrast, and then as soon as I hit 'OK' my settings disappear... so there...

  Do you preview the image view > actual Pixels?

  If this is not the case, the preview may betray.

• Vista and VMWare Fusion 3 problem of shared folders

  Installation of the VMware tools and program 3rd party on Vista with VMWare Fusion 3 I get the message "" could not access network location //VMware-host/shared folder / "missing - Error 1606"

  Hi Vibmai,

  This behavior can occur if there is an incorrect setting in the following registry entry:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\Common Administrative Tools

  You can try the steps below to make changes to the registry and get rid of the error.

  1. Click Start, type regeditin the search box start and press to enter.
  2. Locate and then click the following registry key:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

  1. In the right pane of the registry editor, double-click common administrative tools.
  2. In the value data box, type the following line, and then click OK:

  %ALLUSERSPROFILE%\Start Menu\Programs\Administrative of Directors

  1. On the file menu, click Exit to quit the registry editor.
  2. Restart the computer.

  See the following reference links.
  http://support.Microsoft.com/kb/886549

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1011717

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  (http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry ) How to back up and restore the registry in Windows)

  Try these steps and let us know the answer.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Problem with windows using vmware fusion

  I have a mac book pro and a part of it running windows 7 using vmware fusion. It worked great for 3 years and today I went to open the side windows and all I get is windows media player. Any button I go, medial player arrives. At Christmas, we received an e-mail that fedex was unable to deliver a package, and to download the shipping label to follow, it is phishing so could I have downloaded a virus? How to do this problem?

  Thank you

  Debbie

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question.

  I suggest you to consult the steps mentioned in the article:

  EXE by default association problem windows7
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/exe-default-Association-problem-Windows7/6becdf43-28d2-4eb5-B3E8-a7fcd0b5c69b

  Hope this information helps.

• Problem USB 3 Fusion 8.0.2

  I'm experimenting VMware Fusion.  I do not use my flash drive on Ubuntu, but some of the discussions on the problems of USB, so thought I'd give it a try.  Home my to my Ubuntu VM 14.04 lexar 128 GB flash drive.  Got the error attached.  Had all kinds of strange problems with the flash drive from within the virtual machine.  Tried this fixation on my parallels VM Ubuntu.  Worked without problem.  I have a USB 2 hub.  I joined cross it and perfectly and it worked fine.  I tried to attach the drive USB 3 for my VM W10 and got some funky error that I do not capture.  Something in the W10 on the search for errors, I did.  He found none.  Except for the initial fix, it worked fine.

  In the Ubuntu VM environments, is USB 3.0 selected? (IIRC, it defaults to USB 2.0...)

• Data problems many fusion - cliché registration

  Help! I am bashing my head here...

  How can you tell InDesign to more precisely define 4up work as indicated by its thumbnail in "records per Page of Document?

  SCENARIO: (for the sake of arguments; I kept the size and simple great number) I need a numbered ticket merged 4up on A4 A6. I have need of numbering for going off the top of the left page is a ticket #1, high #2, low #3 and #4 right bottom right (and so on up to 100). I've implemented a. Numbered from 1 to 100 CSV file. I then create the page A4 with the A6 ticket work at the top left, select data source entry in the field. I then export to PDF or create a merged document > all files > multiple records and click OK.

  

  PROBLEM: I'm not a novice of the merger and it always works a treat when creating shippers, 1up jobs numbering or even when I went into the CSV in 4 columns (for printing stacks) BUT in this case, I get only the fusion of the two first albums tickets. No matter if the first lines or first columns are selected or if I increase the size of the document page or I put space between the page layout. (I require no margin)

  I understand there were problems with a merged records with preview today and tested solutions without success. There is no element on the page (other than the work of tickets - a PDF to keep things super simple and text box with < < data > >) to spoil the imposition. I also tried on all the work on the left and in the center of 1up on the size of the document too with little success.

  I'm on the latest version of InDesign CC

  I had an old Acrobat plugin that does no worries, but is more worked with the latest updates.

  I'm sure that there is a real simple option I'm looking for too much here - please can someone report it.

  Fingers crossed!

  Try cropping the image in a bit the left and top margins and right down the value 0 in the blending options and add a corresponding spacing to the quantity you cropped. You may need to set a left and top margin as well. If it still does not work, cut down as much as you can, too.

• VMWare Fusion pro 7.1.1 - blocking running yosemite as a guest problem

  Hi all

  I have a Yosemite pro running (mid-2014, 16 GB of ram video card w / discrete) MacBook. When I run a guest of yosemite, the video is very lag, and the virtual machine is generally not very handy.

  The guest has 4 cores, 4 GB ram, 256 MB of video memory (using the discrete card for 3D applications only) and implements the latest vmware tools 'material' and vmware. I disabled the sound and bluetooth.

  Is that what I can do to improve performance?

  Thank you!

  Yes.  Please check this blog for the manual workaround and a program called "BeamOff" that will provide relief without manual effort.  https://derflounder.WordPress.com/2014/12/13/improving-Yosemite-VM-performance-in-VMware-Fusion/

  I am not the author, and cannot vouch for the port version, however.  I downloaded the source, reviewed and updated on mine, just to be sure.  But it will fix the problem that you are experiencing.  (You need to run the application in the prompt, if it isn't obvious!)

  -Joe

• 10.10.2 OS problems install a DMG in VMWare Fusion

  Hello

  -J' use an iMac, 10.10.2 system

  -J' bought VMWare Fusion 7.1.1

  My goal is to be able to jump from my iMac (running OS 10.10.2 with VMWare Fusion installed) to a virtual machine Mac OS 10.7.5 (a carbon copy of my MacBookAir).

  So, I made a carbon copy of the operating system as a whole on my MacBookAir as a DISK IMAGE (dmg).
  

  Here are the steps I follow on VMWare, but it does not work. I would really appreciate the help. I have more resources.

  1. open VMWare Fusion.

  2 file / new (installation method)

  3. I Select the first option being "Install from a CD or disk image" (see fig. 1)

  4. I click on ""use another disk or a disk image " "

  5. I Select my dmg file.

  6 VMWare asked me to choose my of operation of the System (I do not know if I have to choose the operating system on my iMac running VMWare or the operating system on my disk Image... However I tried both)

  7. the result is the gray apple screen and then it blocks (see fig. 2).

  Can anyone help? I'm completely lost...

  Thank you very much.

  To answer why the steps you suggested do not work:

  When you create a new virtual machine, Fusion expects that you will provide an operating system installation media (a picture CD/DVD or other medium containing the installation of the operating system application), not an image of the hard drive containing the operating system already installed.  Bascially, you have deceived merger taking the image from your hard drive and attaching it to a virtual CD/DVD drive.  The core of the operating system will take care of such a 'disc', but the installed operating system is expected to be on a writeable medium, while the virtual CD/DVD drive is not reading / writing (at least not in the sense that the core of the OS X wait... Burners of CD/DVDs do not count), and the OS crashes instead of start normally.

  As far as I know, you have at least four options for moving forward:

  1. use your MBA to download the app to install OS X 10.7.  You can do this by going to The App Store on your MBA and option-click the purchases button and there you are looking for setup of OS X Lion.  Copy the resultant Installer OS X Lion.app to your iMac, and create the new virtual machine in Fusion, using this application as the installation media.  Then do 1 a or 1 b:

  1. during installation, you will be offered the opportunity to migrate files and settings from another computer... This facility allows to transfer your stuff in front of the MBA to the iMac.  This is by far the safest (and probably easiest) option.

  -or-

  1B. stop the virtual machine with the freshly installed OS.  In the virtual machine settings, add a new virtual hard disk.  Also join the .dmg "insert" backup in the virtual CD/DVD drive.  Turn on the virtual machine and install CCC and use it to restore the .dmg backup of the entire system on the new hard drive (empty).  Power off the virtual computer.  Remove the first hard drive and turn off the CD/DVD drive to "eject" the .dmg backup.  Cross your fingers and the power on the virtual machine.

  -or-

  2. P2V, as suggested by ChipMcK.  (I've never used these special tools).  Opinions differ as to if P2V in Mac OS X is a good idea from the point of view of stability and reliability.  I have not encountered any problems, but I very rarely P2V.

  -or-

  3 it should be possible (but not easy) to convert the .dmg you have a hard drive (hard) that you can attach to a virtual machine.  The procedure is not simple, and I don't think it's documented anywhere...  I'll try to put something together, if none of the previous solutions worked for you.

  See you soon,.

  --

  Darius

• Problem of fusion Lightroom cc 2015.2.1 picture

  I upgraded my old CC of Lightroom for the new CC 2015.2.1.  I'm on an IMac Intel Core I7, 8 GB 1600 Mhz DDR3 and NVIDIA GeForce GTX 680MX 2048 MB.

  I had no problem before making a HDR or photo Panoramo merges. Since the update, photo fusion no longer works and I always get the following message is displayed:

  "unknown error occurred".

  Did he have the same problem? Where you able to identify and solve the problem?

  Thank you

  Thank you very much for the tip. Although the 'photomerge working collapsed with 2015 1.1for me. I unchecked "Use graphics processor" and it worked again. I guess I'll use it as a work around until the next update.

• Problem with the mapping of the keyboard after upgrading to Fusion 7

  Hello

  I noticed that the keyboard layout has changed in the comments after the upgrade to VMware Fusion version 6 to version 7, even if nothing has changed in the settings "Region and language" in comments Windows 7.  Keys that have changed are "------' with ' < ' and ' | ' with ' > ' everything is OK. The keyboard is configured in Italian

  All the world has noticed the same problem?

  Have you solved?

  Thanks in advance.

  The problem has been resolved by the technical support of vmware with a workaround. They know that the question on the keys is interchangeable in the VM after upgrade to Fusion 7.

  Their development team is currently working on this issue on the priority. This will be fixed in the next update.

  However, they have a work around for the problem of keyboard. Following the instructions below to map the key manually in VMware Fusion.

  : Note make a note of the interchangeable keys in Windows before you enable the mapping of the keys.

  1. click on VMware Fusion-> preferences-> keyboard & mouse-> mappings of keys

  2. make sure that 'Enable key mappings' is enabled

  3. click on '+' sign at the bottom

  4. press the key that you want to send from the text box Mac keyboard

  5. press the key you want to receive on the VM in text box

  Note: You can also use the combination of change, control, Option, command if necessary.