Support bi-ecrans

Similar Questions

• Windows xp support bi-ecrans screen runs at the same time?

  Windows xp support bi-ecrans screen runs at the same time?

  Hi stuckfree,

  If you plan to use a dual monitor set up with windows XP, I suggest that go you through Microsoft Help section that will guide you to do the same thing.

  How to configure and use multiple monitors in Windows XP

  http://support.Microsoft.com/kb/307873

  See also:

  Setting up dual monitor: two screens are better than one

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=-4WMSOu6qnn

  Hope this information is helpful and let us know if you need more assistance.

• Computer laptop HP 630 will support bi-ecrans?

  I m using HP 630 laptop computer. I would like to connext a monitor extended using the VGA port. It will support bi-ecrans?

  I m asking this because I connected the monitor to the VGA port and restarted the laptop.

  But laptop did not monitor and menu 'Screen Resolution' did not show the multiple display.

  I also tried "Detect". It did not help.

  If HP630 suuports, can you help me.

  Thanks in advance.

  Need a video to the system driver since the video is listed as 'Standard VGA'. Did you try the fn + fx combination I suggested of keys or the key Windows + p solution?

  However, the first thing we need to do is to get your system with the correct drivers installed.

  Here is a link to the page of driver for Windows 7 Ultimate 64 bit. It would be different if you have 32-bit.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5086783&prodTypeId=321957&prodSeriesId=5086782&swLang=13&TaskID=135&swEnvOID=4061

  Really you need the driver and chipset driver and the driver of the quick launch area. How Windows 7 did settle on the system? This is an original image or it installed afterwards?

• Support bi-ecrans for ProBook 4440 S

  I have a laptop HP ProBook 4440 S.  I have also two monitors - one HP1740 and a HP LA2405.  I want to set up two monitors using the laptop.  The graphics card can conduct both monitors?  If so, I have to use an HDMI cable with a DVI - D connector to plug into the LA2405.  I would like to use the D-15 standard cable to connect the 1740.  If it works, I would be able to stretch the 1740 Office, or would they have to be distributed as two separate screens?

  Thank you

  The ProBook s 4440 (technical Quickspecs at http://h18000.www1.hp.com/products/quickspecs/14306_na/14306_na.pdf) can support 2 outputs video or 2 external (hdmi and vga) or LCD and 1 external. Even if HP does not support dvi hdmi adapters, they are available and seem a bit cheap, so can be purchased to test. Both hdmi and vga ports are usable

• Support bi-ecrans Veriton X4630G

  Hello

  I have an Acer Veriton X4630G (Windows 7 64 bit) with a single monitor in DVI port.  Acer Chat support told me that I can't run multiple screens simultaneously with the VGA or 2 DisplayPort ports.

  Anyone running at least two panels on this PC?  If so, it will work on both ports?

  I'm sorry that you got the answer you did. Everything that I look, this office should be able to support a configuration dual monitor.

• Support bi-ecrans Veriton N2620G

  Greetings,

  I was hoping someone might be able to answer a quick question, I have.

  We hope that buying the device mentioned in the topic but need to run two monitors. I know that the device has two DVI - I and HDMI support but will it output to two monitors at all?

  A press release here: http://us.acer.com/ac/en/US/press/2012/42821 indicates that it will, but if someone has personal experience a response would be much appreciated.

  Thank you very much!

  Concerning

  Liam

  As you have noted, the information clearly shows that the Veriton N2620G is capable of two monitors.

• Video drivers Windows 8 a HP dv6736nr

  I've recently upgraded to the final release of Windows 8 and found that many features do not specifically support bi-ecrans.  It seems that, with the final version to win 8 pilots are now the default drivers that do not support the features of the GeForce Go 7150 m.  I can't find any driver that works and the Vista drivers will not be installed.  Do I have any options?

  You are the very welcome.

  That is right.  You get an error like this. The file is to install on Vista - error because you have installed W8.

  Navigating to the folder of driver by following the steps I posted above should install the driver and you will be ready.

  I gave several members of the forum with the same video (and the nVidia 6150) this method and it worked for all of them.

  Paul

• Dell SuperSpeed USB 3.0 Docking Station model: D3000 lose 2nd monitor connection

  My Dell SuperSpeed USB 3.0 Docking Station model: D3000 is connected to my Dell Inspiron 17R 7720 SE as well as two external disk drives, an external DVD drive, printer and speakers as well as an external monitor.  Recently, I took my laptop on a trip, and when I got home, when I reconnected it it to the docking station it is no longer recognized my external monitor.

  I went through several stages of diagnostics not limited to unistalling then reinstalling the DisplayLink software and accidentally fell on the only action that seems to work - power omitting the Docking station (pulling on the power cord).  Unfortunately, this is a pretty serious action to be taken and the patch does not seem to stick, as I had my second monitor drop out after restarting my computer.

  The biggest problem is that I spent over a week trying to figure out where to get assistance for the Docking Station and the DisplayLink software.  It seems that my only alternative is to call and talk to Dell Technical Support, but is very annoying because my work hours are with Dell Technical Support, but it comes to my personal computer.

  PS another problem I have with the Station of host USB 3.0 SuperSpeed from Dell which is the rubber feet on my Dell Inspiron 17R SE 7720 are outside the width of the laptop docking Station can be positioned on top of the Docking Station because it slides right out.

  I thought I should update the Dell Community in the hope that a few users will read this BEFORE buying a Dell Super Speed USB 3.0 Docking Station.  I would update my opinion on the Dell site, but this is not supported by Dell, after entering a review you can not update.

  Since my original post here, I've known some even more frustrating failures.

  1. Failed to connect Ethernet- My Ethernet connection failed, resulting in the loss of connection with my router and although obviously internet.  I made the important diagnosis and it is finally down to pulling on the power cord of the Station of Dell Super Speed USB 3.0 host.
  2. New router connection not recognized- I bought a router of Netgear R6300 WiFi as I bought the Dell Super Speed USB 3.0 Docking Station, unfortunately I can't the device works with the Docking Station in the loop.  It is with the Dell USB 3.0 Docking Station.
  3. -Speaker problems I had problems with my speakers mounted externally which I thought maybe Windows 8 questions but finally came down to problems with the Dell Super Speed USB 3.0 Station home, fixable in some cases of powerfailing the docking station.
  4. Lack of support- Want to know if this could be caused by the software support, I discovered that the consumer is caught in the middle.  The software providing the support bi-ecrans

  In summary - I found the Dell Super Speed USB 3.0 Docking Station to be a totally reliable device with the announced characteristics does not always, including: dual screen, ethernet, sleep mode and support of speaker connection.  In addition the Docking Station does not efficiently, requiring two connections and not providing the simplicity with docking stations specific previous Dell machine.

• mounting of two HP LP2475w monitors for bi-ecrans support: always use instant trigger plates?

  I have a HP LP2475w for a few years and like so much that I bought another (refurbished).

  I have been using two screens for many years, but decided to get a compatible VESA support that supports both.

  After much research, I settled on this Planar:

  http://www.Newegg.com/product/product.aspx?item=N82E16824995006

  When I get these screens for the Planar, should I remove the quick release plates and mount these on the booth plan?

  I'm unclear as to if the quick release plates would still be used in this scenario.

  Thanks for any advice that anyone can provide.

  DG

  See page 17 and HP LP2275w, LP2475w LCD monitors user Guide. Based on the information presented in this guide, you can either get the monitors directly on the stand or you can ride "quick release plates" at the bar and fix the monitors on the plates. The two methods are supported with this configuration, but I suggest using the plates for the comfort they offer.

  Please send BRAVO

• The A53 8980 will support two monitors?

  It is unlikely, but it's always good to ask: if I install a PCI-E graphics card in an A53 8980 will I be able to use the two VGA ports now available (the other being out of the motherboard) to run your desktop bi-ecrans tense?

  See you soon!

  More card graphic card can support two monitors, a vga and one dvi, an expensive have 2 x dvi or dvi + hdmi, etc...

• Supported dual monitor, Dell Dimension C521

  I am trying to upgrade my Dell Dimension C521 to enable bi-ecrans support.  My first approach was to buy a video card, hoping to use the VGA integrated with a low end ATI video card in the Slot PCI - E.  While the video card is well worked, by using the onboard VGA in conjunction with a video card is an "unsupported configuration". It is either / or situation, which means that a monitor at the same time.

  My second approach is to get a KFA2 GeForce 8400 GS graphics card, which seems to be one of the few that can be used in a low profile CPU and have a DVI and a VGA output. The problem, they do not work.  I say they, because I already tried two, and they both fail the same way: the computer seems to start up, but it is no output to the DVI cable.  If I plug the VGA cable and not on the DVI cable to the monitor, I just get a bunch of vertical lines on the monitor. I talked to a KFA technical support, although at first, they thought it would be a bad video card, they now think it might be related to the fact that power 280W does not meet the requirements of the Commission, which needs a minimum of a supply of 350W.

  It seems to me that there are a few options left:

  (1) find a video of lower power of cards that has two * real * outputs - DVI and VGA - (and not only replicated TV output). It will also take a low profile video card.  Any suggestions would be greatly appreciated.

  (2) upgrade of power supply 350W or more and use the 8400 GS graphics card. Unfortunately, Dell does not appear to make a more powerful PSU for the C521.  Is there power supplies for another half height Dell computers that might work?

  (3) as a last resort, a ditch the C521 and buy a more powerful computer.

  Are there options that I left out?

  Message edited by DrJJH on 09/23/2008 13:07
  
  

• Supported dual monitor on a virtual machine

  I've recently started working with VM.  One of my first tasks is to improve close Citrix to raise more than two servers citrix virtualization.  What I've done.  It works fine too, but some people began to ask questions on two monitors.  99% of my environment is managed by thinclients.  I have not found is when a user is connected to one of the physical citrix servers there is no problem with the double screens, but when they are saved in one of the citrix virtual servers the bi-ecrans is as if it were a screen instead of a true dual monitor.  Is it possible to configure the virtual machine to support two monitors.  I tried to change the settings of the machine under the video card, but when I change to support 2 monitors, and then click OK, it it changes just back to one.  Someone at - it guidance on how this could be done or if I am barking the wrong tree?

  Help us those in need, so when we are in need we will be assisted.  Isn't this what computer scientists are for.

  your best bet on that is going to be the 3rd party.  Another use of the/span option in RDP, you may want to look something like http://www.splitview.com/

• Secure erase is supported in the Sierra

  After downloading Sierra I can't secure erase access via finder?  How files are securely erased using Sierra 10.12?

  Hello TaxiFish,

  You must encrypt the drive with FileVault first. Then just delete. Apple now uses SSDS in most of their machines and these drives don't support secure erase.

• Access denied... Apple Support pages

  Someone else gets this error on Apple Support Pages?

  

  alexbird wrote:

  Someone else gets this error on Apple Support Pages?

  

  first time I saw it.  How do you access the support page?

• I have an iPhone 6 more, an official version of China, it shows a battery indicator when I turn off support, is this normal? I can depulicate this function to another iPhone? I know how?

  I have an iPhone 6 more, an official version of China, it shows a battery indicator when I turn off support, is this normal? I can depulicate this function to another iPhone? I know how?

  I remember reading somewhere on the Apple site in recent years on some models of Chinese iPhone with this capability. No other iPhones display this and there is no way to enable it. I can't find the article which includes this information.