SupportAssist device inventory not up to date
I recently configured SupportAssist and successfully connected to the OME. All active devices from Dell have been fired in the list of devices SA. Several key features are properly monitored and open tickets when a problem arises. So everything seems to work.
Three days ago I added a new range of discovery to OME, and we have a server that indicates problems of RAID controller. I want to get this server configuration in SA, but newly discovered to OME devices are only partially informed in SA.
How can I force an update and refresh the list of devices SA? Is there a list of maximum material that I exceeded (currently at 99 devices in SA)? No matter if the user iDRAC to OME is not "root"?
Matt thanks for providing the log records.
The R710 systems are 11G servers and they were shipped with iDRAC6. SupportAssist only supports iDRAC7 and iDRAC8 on PowerEdge 12 G and 13G servers respectively.
In order to manage systems R710, you'll have to discover them using the address IP of OS and it is strongly recommended that you install OMSA on these systems to exploit the increased level of diagnosis/reports that it supports.
Tags: Dell Products
Similar Questions
-
Original title: USB problem
I use windows 7 as operating system. I have problem when I insert USB devices as pan tie drive, mobile, reader of cards ect. USB port of my PC. The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive. so please suggest me what I can do?
Hello
Start Windows Explorer, and then see if there is a drive letter assigned for access to the
drive. If this is not the case, check if the disc is shown in disk management.- Open Computer Management by clicking on the button start , by clicking on Control Panel, system and security, clicking Administrative Tools and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
In the left pane, under storage, click Disk Management.
If there has made a right click option - assign a drive letter for you can use Windows
Explorer to copy files.I hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
I SAVE ALL MY DATA TO AN EXTERNAL HARD DRIVE MDL WD16001032 AND LOOKS LIKE THIS INS DEVICE IS NOT COMPATIBLE WITH WINDOWS 7... WHAT CAN I DO?
I SAVE ALL MY DATA TO AN EXTERNAL HARD DRIVE MDL WD16001032 AND LOOKS LIKE THIS INS DEVICE IS NOT COMPATIBLE WITH WINDOWS 7... WHAT CAN I DO?
I don't understand. What makes you think the reader 'is not compatible' with Windows 7? Windows (or any other OS besides) sees no external hard drives as "compatible" or not...
Now if you have a PROPRIETARY disk, then that is a different case. If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog
-
my machine continues to say my drivers is not up-to-date, but when I try to update in the Device Manager it claims they are confused? How can I ypdate my drivers for free I just paid so far my OS for win 7
sincerelly,
setcrosss1
If you have a finder driver installed, uninstall it. Very often, they find the correct manufacturer drivers but only suitable for revisions to material beyond the stuff in your own computer.
-
Hello
We have added the new datastore iSCSI (disk/lun)
This new data store appears in the inventory. Warehouses of data, but not availble for quick vMotioning or the creation of a new virtual machine.
did we miss a step?
Ty
r
The reason is that the data store is not presented to all hosts in a cluster. When you create the VM in vCenter Server, only warehouses of data visible to the host on which the virtual machine is created are displayed.
Make sure the presentation on your storage system is correct and rescan your hosts.
To check the above, take a look at the Configuration-> Storage for guests.
André
-
HI -.
I am looking for help to point me in the right direction. This problem occurred after a reboot of the system.
I'm in vmware esxi essentials 5.0.0 821926
I use the starwind software as my iSCSI target
I use ISCSI to connect to my server from storage to the esxi hosts.
I have 2 warehouses of data showing inactive under clusters of data storage and the data store. I have a third-party data store on the same server that is loading properly.
I currently have the same behavior on three esxi hosts:
under configuration - storage adapters is the ISCSI path is active. Data warehouses appear under devices and mounted. In data warehouses, they are inactive. On the same storage server
on the starwind Server - I have
built a new target
removed and added the databases to the new target
Changed the IP address of the target.
On Esxi hosts, I removed the ISCSI server, discover places BOF dynamic and static and added under the same or IPs news discovery
I can restart esxi hosts & storage servers and get to that same point.
Whenever I find myself in the same place - course assets, devices mounted, inactive in data warehouses
I don't know what else to share, let me know what you need to know to help out me.
Thank you
Dylan
OK, incase someone crosses my ramblings, it may help. My original question was warehouses of data that would not rise. They were visible as devices in the area of storage under devices and as devices in the scsi adapter.
When I would try to force mount them, add storage, keep the signature, mount they wouldn't mount. I did some research and my question was after a failed mount attempt strength as got data attached as snapshots warehouses. I then mounted force them and he tells will data warehouses and I got them back.
I followed this KB to identify and resolve the problem
manipulation of vSphere detected as snapshot LUN LUN (1011387)
When it was over, I tried to add vms back and found a new show. Power of vms would expire. the vmkernel.log showed;
2014 05-27 T 07: 20:40.010Z [verbose 'Vmsvc' 564D7B90] Vmsvc: filtering Vms: ignored not ready to request power state vm vim. VirtualMachine:75
AND
(2014 05-27 T 03: 45:47.821Z cpu4:2052) NMP: nmp_PathDetermineFailure:2084: SCSI cmd RESERVE failed on the vmhba35:C0:T1:L0 path, booking on eui.cff548d1952b1e4c of device status is unknown.
I had latency huge read write showing upwards, 3K and more
After several searches, I had in the ESXShell and found that there is no conflict of booking.
On a whim, I took inventory all virtual machines that are now inaccessible. I then added a DOS virtual machine. Alto! the latency down to version 1.2 a.7 ms for all data warehouses.
ultimately the instructions said you may need to add virtual machines in the inventory, but does not remove all virtual machines first. I was grabbing vms that were not in stock, so I didn't remove the old virtual machines in the inventory.
A recruit Mennonites, Yes.
-
Microsoft will come out with Windows 10, as an upgrade of the free operating system next month, July 29, 2015. They came out with an app, 'Get Windows 10', which is intended to help the operating system upgrade process. In this app, it checks for compatibility issues that may exist between your computer and their new Windows 10. I get results for two of compatibility issues when I run this app. The one that concerns me, it is with the video card that came with my computer, AMD Radeon HD 7570.
The app tells me: "these devices are not completely compatible with Windows 10" and he adds "you will encounter problems with your screen."
Is there any driver updates that resolve this problem?
The driver, I installed on my pc is Advanced Micro Devices, Inc. version 8.960.11.2000
Windows says that the driver is up-to-date.
If no driver is available to correct this problem will be I need to replace the video card in my computer and if so with what?
I currently use two screens, a LG 22EA53 (analog) and an Acer S230HL without any problems with Windows 7, Home Premium, Service Pack 1.
Malygris1,
Well, son of a gun... looks that microsoft has made changes in their updates.
Now when you run the "'get 10 app Windows, check your PC ' it reads in devices..." "0 problems found."
Looks like Microsoft do with last-minute changes, as you indicated, and others have mentioned about being patient on this matter, that they may (?) have addressed this problem. Probably won't suddenly course up until the update is done.
Guess for now, I have to score this as accept as a Solution.
-
HP imaging device was not found.
For some reason, I now find that I can not scan from my HP Office J6410. When I start my PC, I get the message "the HP imaging device is not found." with 5 options to try. Extended error information are presented as "8 [(1, 0,-2147221496)]", which I guess means something to someone.
I tried each of the five data options, but I still get the error. I ran the Diagnostic Utility Scan, to see that the process fails when checking "Windows (WIA) Scan. The text of error I get is:
"HP scan Diagnostic Utility cannot scan using the service Windows Imaging. Save your work and close all applications. Turn the product off, turn it on again, and then click on restart the computer. If the problem persists, you will not be able to scan using the applications that use this service, such as Microsoft Paint. HP scanning software applications can still function. If you want to scan with WIA, remove the driver by clicking on the software uninstallation. Reinstall the software with the product CD or by downloading the most recent full features software on the HP Web site (recommended)".
I tried all that, but still, I get the original message. I've never had this before, but it appeared only recently. Anyone know what is the problem and how to fix it?
TIA
Duncs
That's what I ended up doing. Connection of the USB cable to get the installation program, then leave for a week or two. I then tried setting up in the wireless and removed the USB cable. Everything worked well. Thus, it seems that you need the connected USB so that you can fully set up the printer. Happy that you guessed it work. Duncs
-
my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.
HI - try the following steps:
On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):
-Double-click the Home button, and then drag upward on each of the app previews to close.
It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:
-To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;
-To switch on: press and hold the side button until you see the Apple logo.
If this does not resolve the problem, try next disconnect and rematching of your watch:
-L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.
-Choose to restore the watch (backup restore) when provided the opportunity during the whole.
-Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
-
One or more devices do not support multi-equipment tasks.
Hello
I work with 2 X USB series Renault (6356 USB). I am acquiring data analog voltage of all 8 channels on the two Renault (total up to 16 analog inputs). I need data acquisition to synchronize and trigger from an external digital source (a signal that I currently wired in A PFI0 of Dev). I use a sampling frequency of 800 kHz and a 400 kS buffer size.
I tried to use an express vi for two devices; two separate express vis for each device; and recently changed to DAQmx icons (as seen in the attachment). Anyway, I get an error (error-201426: one or more devices do not support multi-equipment tasks.). He referred then DevA and DevB as devices that do not support tasks. I was under the impression that tasks multi-equipment agree with property X of the series. I use NI-DAQmx 9.5.5.
In the attached photo, I left most while loop. The part of the diagram that I left out is just for viewing and recording of data, I've included parts, I felt it necessary to describe my problem.
I would appreciate all the advice really.
Thank you
Leslie
I think crossrulz is right. No worries, as they must be in separate tasks, your data is always synchronized as you want. You'll just have to do some things in the software, because not all the data will be returned in the same Bay of waveforms. What you can do is to create two tasks (one for each device), build an array of tasks, and when you do a reading, do it inside a loop for. concatenate the waveforms of each reading and you have a table of waveforms with all your data as if you read it in a single task. You also need to configure your second task to trigger the DevB/PFI0 and divide your trigger wire, he PFI0 wiring on each device.
-
After hybernation, all usb and wifi mobile devices does not work
Original title: Hybernation question
After hybernation, all usb and wifi mobile devices does not work. Similarly, it is not stop as well. I turn off the power to the network option all usb hubs. Problem however still closes. Please suggest. I have Windows XP Sp3 installed. All the drivers and the windows update is up to date.Hi Mirza.Shanawazbaig,
1. what happens when you connect any USB device to the computer, or trying to shut down the computer after hibernation?
2. do you have security software installed on the computer?
3. did you of recent changes on the computer?
4 when was the last time it was working fine?
Method 1
See the below Microsoft article and try the steps mentioned, check if it helps.
Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation
http://support.Microsoft.com/kb/871233
Method 2
I suggest that you download and install the updated driver for the network adapters and display on the computer by visiting the card manufacturer or computer manufacturer website manually.
How to manage devices in Windows XP
-
The initial problem was no audio sound on CD. The computer had other system sounds. I uninstalled the Realtek drivers and downloaded from the website computer and reinstalled. Still the same problem. I tried to adjust the volume control and clicked the speaker at the bottom on the right bar. I got a message saying there is no mixer device and the small speaker disappeared and reappeared even after several reboots. There is also an error "no audio device".
After reboot, the computer gives this error message: "Generic Host process for Win32 Services has encountered a problem and needs to close." We are sorry for the inconvenience. »
While trying to find a solution on the web, I discovered that the computer does not recognize the usb key,
It won't restore to an earlier time,
the CD/DVD drive will not run the data disksand Windows Update will not update. The error message said: "the site has encountered a problem and cannot display the page you are trying to show." There is an error number: 0x800706BE I tried to find this error message on the MS knowledge base, but it is not listed.
The last Windows Update was on April 16, 2009 so I tried to restore to April 15, but it says 'system restore is not able to protect your computer. Restart your computer and restart System Restore. " After the reboot, the same thing happens.
Any help is appreciated.
The data is not "hostage." Pull the disk and put it in a box disc or it slave to a working computer and retrieve the data. If you don't have an additional computer you will need to borrow a friend or with the machine at a tech. You can also try the o with a Linux Live CD boot. I like Knoppix, but there are others. This has two advantages: 1) if the system works, you can back up all the data that missed your last backup; and (2) with the machine running Linux allows to determine whether the problems are caused by software or hardware. If the machine is unbearably slow and/or Linux cannot run correctly, you know that the hardware is at fault. If the machine behaves perfectly under Linux, you know that the software (Windows) is at fault.
Whatever you do, do not install Windows without test material. If the hardware is at fault, software solutions like reinstalling Windows will be unnecessary. MS - MVP - Elephant Boy computers - don't panic!
-
"0xc000000f the boot selection failed because a required device is not accessible."
"0xc000000f the boot selection failed because a required device is not accessible" I'm not able to use the installation disc that my CD/DVD drive has failed. Is there a way to create a bootable via a USB disk and the PC started?
Windows Vista.
Hi Anand,
The error "0xc000000f the boot selection failed because a required device is not accessible" is related to the error in the hard drive that is required to start.
Steps to create a bootable USB stick with Windows 7
As the CD/DVD drive does not work, you can create a bootable USB drive using which you can repair this problem.
Before you create the bootable USB key with Windows 7, you can download Windows 7 from the link
provided below.
http://www.microsoftstore.com/store/msusa/en_US/PDP/ProductID.253735200
Use the Windows 7 USB/DVD tool to create a USB bootable with Windows 7.
Here is the link that will help you to create a bootable USB.
WINDOWS 7 USB / DVD DOWNLOAD TOOL
Steps to fix the problem with the error code
After you create the bootable USB key with Windows 7 you can insert it in the boot of the computer, and then press F12 to go to the boot window priority and change the priority of Boot on USB.
a. After you change Boot priority on USB that is usually at the last, the computer will boot using the USB and it will take you to the page where in the GUI (Graphical User Interface), it will display the install now option.
b. here you must select fix you the computer from the bottom left.
c. This will take you to the WINRE (Windows Recovery Environment) window that offers different options
d to fix problems with Windows.
e. in WINRE, select the option that reads the command prompt and type the following command.
Chkdsk /f /r
Note:
The data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.
It will be useful.
-
Devices may not work properly after the upgrade
While trying to update, I received this message:"These devices does not work after the upgrade.Before the upgrade, we recommend that you update the drivers for those devices.Cancel the upgrade, open Control Panel and search for"update device drivers", or select the instrument manufacturerWeb site to search for updated drivers.Storage controllers: controller IDE ASZE9NGBI searched Google, Bing and Microsoft and... nothing. Please help me! Thanks in advance!
This diagnosis you have done to date?
Did you look in Event Viewer?
Error messages?
Please provide details about your current problem.We are better able to help you if you help by providing us with as much information as possible...
Suggestions for asking for help on a site.
http://support.Microsoft.com/kb/555375
http://www.CatB.org/~ESR/FAQs/smart-questions.html
http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395
-
Code 19: Windows Mobile Device icon not found on my computer
Original title: Windows Mobile Device icon not found on my computer
Hello
I donno why but I can't find the icon of my pocket pc (Hp Ipaq) on my computer, the device is connected (a USB icon on the task bar) but I can not navigate on the device in order to copy data for example, as there is no icon.
Notice that I can install programs on it (which means that it is recognized by the system), the Sync Center says it has disconnected, mobile windows manager shows that it is too disconnected (sometimes showing Error), but the device itself is to show that it is connected.
In the Device Manager there is something wrong with the PPC (yellow triangle), it reads: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "(that's french).
Hi AlgeriaRocks,
I suggest to uninstall the software completely and try to update the latest version of the HP iPAQ h1900 Pocket PC series.
For more information see the link:
a. Click Start and type in Device Manager in the start search and press ENTER.
b. expand the device in Device Manager
c. right-click on the device, and then click Properties
d. click on the driver tab and click on uninstall the drivers and click OK.
e. restart the computer and check.
You see the support of HP at following link and try to update the latest version of the drivers.
HP iPAQ h1900 Pocket PC series-download drivers and software
For more information, you can also consult the following link:
Error conditions (performance, beeps, etc.)
Hope this information is useful.
Maybe you are looking for
-
Cannot download adobe flash player because of the age of my computer. Impossible to watch videos or play games online. It's my only computer and I can not afford anything else.
-
Satellite Pro M70: The game performance with Vista and Intel 915GM graphics card
I have a satellite Pro M70 1.73Ghz with 768 MB of RAM.Although many would condemn the 915GM chipset (with graphic GMA900) as garbage, I was surprised to find on XP it can run quite a few games like Need for Speed Underground 2.I've heard some bad com
-
On MacOS 10.11.2, I aimed my browser and inadvertently fall a webloc on my window iTunes 12.3.2.35 file, creating a fake podcast. Edit > Delete does not delete it, any more than the fn-DELETE, or command + DELETE, or control - delete. What will be?
-
Arduino Uno + Labview 8.5
Hello I am trying to send commands to the Arduino Uno using Labview 8.5. Tried setting basic series writing and Read.vi the baud rate 9600 and rest of the default parameter, selected the correct COM port and wrote the command i5000\r\n This command i
-
Alienware Aurora r4 does not start with new graphics card.
Hey,. I have an alienware aurora end of 2012 I believe. I currently have a series of 6800 AMD raedon graphics card, processor 3930 r9 k i7 and 8 GB of ram. I recently bought a MSI gtx 970 game to replace my old graphics card. I plug this card and it