Suspension of Application VSS

Similar Questions

• A snapshot could not be created. Check the event logs application VSS amd SPP for more information. Details: the specified object was not found.

  I get this message to 5 seconds after attempting to back up using a Seagate external hard drive. The drive has plenty of space (1 TB) and is formatted NTFS. System recognizes no problem when I Plug and I can move files to and from it no problem otherwise.

  No other thread does deal directly with this version of the problem (with the object "not found"). Any help or ideas are appreciated.

  Hello

  This occurs generally when the Volume Shadow Copy service and SPP services are not started. We will analyze and identify the cause of the problem.

  I suggest you perform the steps mentioned by "Diana D replied October 23, 2010" to a similar discussion.

  Reference:

  snapshot could not be created Details: the specified object was not found.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/shadow-copy-could-not-be-created-details-the/a55057f8-67ed-4FA3-b61e-15f8904aaba1

  Note: Make sure you put in road security software and Windows Firewall later once you are finished with the test.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost. When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  See also:

  Back up and restore frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  Hope this information helps. Response with status so that we can help you.

• Suspension of consistent application on Windows Server 2012 invited with U2 ESXi 5.0

  We lack ESXi 5.0 U2 (build 1254542) and we are going to have problems making consistent application paused on our virtual machines that are running Windows Server 2012.

  We use Acronis vmProtect, and he throws warnings on our VMS in 2012 on the SQL Writer is not not available.  I contacted the Acronis support and they said that it is a problem with the suspension of consistent application.

  When I take a snapshot of a VM 2012 (verification of the ability to perform a capture instant consistent application) capture instant full fine without errors or warnings.  But when I look at the vss_manifests zip file that is created, there is only a single file (backup.xml) with a single line.

  When I take a snapshot of the suspended application on our virtual machines that are running server 2008, the vss_manifests zip file also contains files for each of the VSS writers.

  I checked the disc. EnableUUID is set to true (the virtual machines created on ESXi 5.0 U2 with Virtual Machine Version 8).  I have even manually it specified.

  I checked that the virtual machines use only SCSI disks (there is only 1 disc) and is not a GPT disk or dynamic within the guest OS.  It is a thin disc put into service, if that matters.

  I checked VMWare Tools is installed on the client, and I tried to reinstall it.

  Is there something else I should look for consistent suspension with applications working on Windows Server 2012?

  What do I need to run ESXi 5.1 for this to work?  (Or could I just install the latest version of VMWare Tools manually?)

  If I have to run ESXi 5.1, 5.0 to 5.1 ESXi licenses are worth?  (We have the 5 Essentials license Server vCenter).

  If I have to run ESXi 5.1, must I also improve our vCenter Server installation of 5 to 5.1?

  Thank you

  We've finally updated to 5.5 and everything seems to work fine now.

• Using NetApp SRA with vSphere SRM and suspension

  Hello!

  My understanding is that SnapMirror is no suspension, so as a result, you will only get consistent backups fail?

  My question is, when you use the NetApp storage replication adapter in Site Recovery Manager, you now get supported in standby, as MRS can work alongside the matrix to orchestrate the recovery correctly?

  See you soon,.

  Bilal

  Necessary for suspension of application with NetApp NetApp SnapManager.

  SRM does not add any capabilities of demand for NetApp mise en veille (or another provider of table). SRM monitoring, can trigger and in some cases reverse replication, but it is not change/impact how replication is running.

  If you perform a scheduled migration (or a failover of DR and MRS can communicate with servers SRM & vCenter protected site), SRM will replicate storage, turn off the system VMs graciously and then happen again so it is not necessary in these cases of app-compatible replication.

  Does that answer your questions?

• Update disc. EnableUUID, the script does not

  Below, I've posted a script that I was hoping to use to add the disk. EnableUUID option for all my virtual machines. It is important to ebale suspension of application on the virtual machines made prior to 4.1.  It is not actually at work. Who wants to take a shot at figurig why?

  $vCenter = Read-Host "Enter vCenter Server name".

  SE connect-VIServer $vCenter

  $vmConfigSpec = new-Object VMware.Vim.VirtualMachineConfigSpec

  $extra = new-Object Vmware.Vim.OptionValue

  $extra. Key = 'drive. EnableUUID ".

  $extra. Value = $true

  $vmConfigSpec.extraconfig = $extra

  Get - VM | % {(Get-vue $_.ID).} ReconfigVM ($vmConfigSpec)}

  Disconnect-VIServer-confirm: $false

  The problem is caused by the fact that the Value property needs a string that says "true" and not the Boolean value $true PS.

  If you change the script like this, it should work.

  $vCenter = Read-Host "Enter vCenter Server name"
  
  Connect-VIServer $vCenter
  
  $vmConfigSpec = New-Object VMware.Vim.VirtualMachineConfigSpec
  $extra = New-Object Vmware.Vim.OptionValue
  $extra.Key = "disk.EnableUUID"
  $extra.Value = "true"
  $vmConfigSpec.extraconfig = $extra
  
  Get-VM | % { (Get-View $_.ID).ReconfigVM($vmConfigSpec)}
  
  Disconnect-VIServer -Confirm:$false
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Backup on an external hard drive, the error code 0 x 81000019 a snapshot could not be created. Pls chk "vss" and "spp" application event logs.

  A snapshot could not be created. Please check the spp and 'vss' ' applications for more information event logs.

  Details: Insufficient storage available to create the shadow copy storage file or other shadow copy data. Error code 0 x 81000019.

  The size of the external drive is free to Go 465,65 Go 465,75. Also "size of the backups is not available" is displayed under the size of the disk in GB. The size of the backup copy is 57 GB.

  Event logs see the backup error event ID 521

  GENRAL:
  Save the operation which started at 2010-03-11 T 13: 41:53 failed because the service operation volume shadow copy to create a shadow copy of the volume during backup failed with the error code 2155348249.

  Details:
  + System
  -event data
  backup time 2010-03 - 11 t 13: 41:53.466000000Z
  Error code 2155348249
  Error Mssg % 2155348249

  Hi Gilles Pelletier,.

  1. check the shadow copy Volume service in the services window. Use the following steps to check:

  i. click on start and type services.msc in the search box

  II. the search for the shadow copy Volume service

  Please let us know the status and startup type. Make sure that the startup type is automatic

  Steps to set the auto services

  i. search for the service

  II. right-click on the service

  III. If the service is stopped and then starts the service

  IV. Select Properties

  v. and in startup type, select automatic

  2 disable the firewall / anti-virus temporarily installed on your computer and then check if the problem still persists. If the problem is resolved, you will need to uninstall the software and reinstall it back or change the settings and check.

  3. even check a drive for errors: http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors

  Check this link which has the similar problem: http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/9b18bc73-26e5-4b28-819f-11628ebbf5e2

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• A snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information

  Original title: a snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information. Details: shadow enough storage to create the copy storage file or other shadow copy data. Error code: 0 x 81000019

  I tried to back up my files using an external hard drive (which I have done before with Windows 7 64-bit), but recently I get the same error code. I have re-formatted external hard drive, run diagnostics on it, restarted the computer, etc and nothing seems to work. I also tried both options posted in another forum with the same error and too, they were not successful (external is already NTFS and now that it has been re-formatted is completely empty). Windows has more suggests? I hope not to have to use drag and drop my files whenever I want to save my computer.

  Thanks for the help!

  Read this article because I believe that the amount of free space in the 100 MB partition is too small. Article is a different error code, but the technique to increase the size of the 100 MB partition is the same.

  Note: Backup of your hard drive as described in the article.

  How to fix error code: 0 x 81000033
  http://www.PAGESTART.com/win7br0x8100003301.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Suspension of the application reinable

  My application has somehow been suspended on the supplier portal. Who should I contact to fix this? It is a matter of urgency.

  @bkayfitz send me a PM with the appname and appID and I'll take a look.

  For the future, please join these types of issues in favour of the seller.

  https://developer.BlackBerry.com/blackberryworld/vendor_support.html

• Gel applications (suspension)

  I have an application that takes a long time to start. for the sake of long to explain.

  Is there anything Thinapp for me to start the application, freeze and restart it when I need to use?

  I think what happens with Virtual Machines: can I start a virtual machine, launch applications, suspend the virtual machine and restart it, and when I restart it I see all my running applications.

  Is there a similar feature for simple applications with Thinapp?

  Concerning

  Marius

  Interesting idea, but is currently not possible.

• vSphere replication with suspension of guest OS

  Hello

  We are setting up vSphere 6 replication. For some VM (Windows 2012) we want to use the guest OS standby to be sure the application/database is not corrupted after a disaster. I noticed that whenever a replication begins and ends, the VM freezes for a few seconds. When I start a ping during a replication, I also see a couple (two or three) waiting times. I wonder if it is a behavior normal and if not, what can be done to improve it?

  
  

  Thank you

  It is the normal or expected behavior. This is caused by VSS sleep and the VM snapshot she needs.

  If your application does not require the VSS suspension I would not recommend using it. Most modern operating systems and applications manage crash consistency very well (think of what happens to your application if the host the virtual computer runs on crashes or bluescreens BONES, the end of your application upwards with corrupted data?).

• Satellite A100 hangs after hibernation / suspension

  Hello

  I have a new A100 with Vista installed. Everything works fine, but there are two REALLY boring problems.

  1. after the suspension or wintering, Vista often hangs when you try to connect to internet/network. I know it's a question that I've seen other people writing similar things on other sites. Y at - it a cure?

  2. When blocking down after using the net, I am often a message that Adobe Reader has a lot of open pages and I can't stop.

  Thanks for your time.

  Hello

  Vista often hangs when you try to connect to internet/network
  (1.) you want to tell the WLan or LAN?
  It's not easy to offer the solution in this case believe me Dimitri. Test and Binder are what you could do, what version of BIOS do you use? Check if the new version is available on the Toshiba page. Sometimes, the update of the BIOS might help.
  Further, you can try to disable the option in energy-saving Wlan/Lan Card properties and try to update the drivers.

  2.) this only happens on my laptop 2 different. But I don t use the Vista but XP.
  From time to time I m not able to stop because a message appears saying: Adobe acrobat reader runs in the background and can not close.
  In this case, you can try to reinstall the software Adobe reader and try to clean the registry with an application of part 3.
  Additional you may stop loading the acrobat reader at the beginning. Simply remove the entry from the registry RUN acrobat reader

• acceleration of bench of suspension travel active

  my application is a project of active suspension, I need to measure acceleration and integration of two to get the position of an accelerometer sensor.

  I found a lot of codes, it only works in simulation, but it does not work when I connect it on the acceleration sensor.

  I know that I should remove a CC of the speed signal lag after the integration, but it is not clear how we do.

  I know that there are many types of integration features in Labview. which of them I should use.

  My accelerometer is ADXL335

   

  http://www.analog.com/static/imported-files/data_sheets/ADXL335.PDF

  Whenever you perform an integration, your result is an arbitrary constant added to what is essentially your starting value.  You have acceleration data.  If you integrate this, you get the speed, but you will need to add the initial speed to this to get the actual speeds.  When you integrate the second time, you get the positions, but you need to add the starting position for this to get real jobs.  So the constants you add will depend on your actual starting conditions (do not forget that the calculation was invented by Newton to describe physics ).

  I usually use Simpon rule for numerical integration, but if you are sensitive to performance, you can use the digital trapezoid rule or rectangle integration.  Before you do anything, you should probably read on them.  The Wikipedia article gives a good overview, but the chapter 4 of the book online Numerical Recipes will give you a much better appreciation for the subject.  Most of these methods of integration is available natively in LabVIEW, so you don't have to write them yourself.

• Unable to present a review of the cases of suspension on an Xbox

  I can't send a review of the cases of suspension on the harassing messages even if I know for a fact that I was not guilty, since I have the cat food and I have pictures of the messages themselves as evidence. I was harassed during a fight on xbox alone a dead or alive 5 last lap he called a spammer and kept sending rude messages and responses only I did were k and? It's just a game get top. I play for fun, he responded with pls and said so go the qqueen drama you don't fight again bye Felicia and you are reported while I was being liabilities I became suspended rather even if I reported than him and yet he did not get suspended at all. So basically I want to prove I am innocent, but I do not have the chance a way to fix it?

  Hello

  Your Question is beyond the scope of this community...

  I suggest that repost you in the Xbox Forums.

  "Xbox a Preview program FAQ.

  http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ

  'Home'

  http://forums.Xbox.com/

  "Xbox forums.

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  _________________________________________________

  "Xbox Forums directory.

  http://www.Xbox.com/en-us/forums

  General

  • Home/FAQ/Forum policy

  • Community general discussion

  Material & Discussion Services

  • Equipment & Services

  Xbox support
  Agent hours: M - F 09:00-17:00 PT

  • Xbox 360 support

  • Xbox 1 support

  • Xbox on supported mobile devices

  • Xbox on Windows support

  • Networking of hardware information

  • Material information TV

  Law enforcement forums

  • Xbox 360 account Suspensions & Console bans

  • Account Xbox one & measures Console application

  Technical support of Xbox Live rewards
  Xbox Live rewards Squad hours: M - F 09:00-17: 00 PST

  • Xbox Live rewards program announcements

  • Xbox Live rewards Questions

  See you soon.

• Hyper-V backup fails VSS in Windows Server R2 2012

  When I try to do a backup of a VM (just the virtual machine, nothing else selected) on my Windows Server R2 2012 machine, I get the following error:

  I still have to find an answer to this question.

  Log name: Application
  Source: SPP
  Event ID: 16387
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: BitVault
  Description:
  Microsoft Hyper-V VSS Writer writer experienced an error during the creation of the snapshot.  More information:.
  The event XML:
  
   
     
      16387
      2
      0
      0 x 80000000000000
      2746
      Application
     
     
   
   
      Microsoft Hyper-V VSS Writer
     
     
      Writer experienced a transient error.  If the backup process is started, the error does not happen. (0x800423F3)
      Unknown error (0x80004005)
   
  

  It's about getting the VSS event log

  A VSS writer has rejected an event with error 0x800423f3, the writer experienced a transient error.  If the backup process is restarted,
  the error does not recur.
  . The changes that the writer made to the writer components while managing the event is not available to the applicant. Check the event log for events from the application hosting the VSS.

  Operation:
  PrepareForSnapshot event

  Context:
  Execution context: writer
  Writer class ID: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
  Writer name: Microsoft Hyper-V VSS Writer
  Writer Instance ID: {4736e32f-5954-4b83-9ca5-37c560f308d5}
  Command line: C:\Windows\system32\vmms.exe
  Process ID: 3556

  PS C:\Users\Administrator > vssadmin list writers
  vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
  (C) copyright 2001-2013 Microsoft Corp.

  Author name: 'Task Scheduler Writer'
  The writer ID: {d61d61c8-d73a-4eee-8cdd-f6f9786b7124}
  Writer Instance Id: {1bddd48e-5052-49db-9b07-b96f96727e6b}
  Status: Stable [1]
  Last error: no error

  Writer name: 'recorder VSS metadata store.
  The writer ID: {75dfb225-e2e4-4d39-9ac9-ffaff65ddf06}
  Writer Instance Id: {088e7a7d-09a8-4cc6-a609-ad90e75ddc93}
  Status: Stable [1]
  Last error: no error

  Writer name: 'Performance Counters writer. "
  The writer ID: {0bada1de-01a9-4625-8278-69e735f39dd2}
  Writer Instance Id: {f0086dda-9efc-47c5-8eb6-a944c3d09381}
  Status: Stable [1]
  Last error: no error

  The writer's name: "System Writer".
  The writer ID: {e8132975-6f93-4464-a53e-1050253ae220}
  Writer Instance Id: {2ff32bb9-b4dd-4959-bfa9-7ea79b4567ba}
  Status: Stable [1]
  Last error: no error

  Author name: 'ASR Writer.
  The writer ID: {be000cbe-11fe-4426-9c58-531aa6355fc4}
  Writer Instance Id: {4b7e63c6-ecb1-47f2-b317-e665b5de8c8c}
  Status: Stable [1]
  Last error: no error

  Author name: 'Microsoft Hyper-V VSS Writer.
  The writer ID: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
  Writer Instance Id: {4736e32f-5954-4b83-9ca5-37c560f308d5}
  State: [8] failed
  Last error: error renewable

  Author name: 'Dedup Writer'
  The writer ID: {41db4dbf-6046-470e-8ad5-d5081dfb1b70}
  Writer Instance Id: {5ac93c0a-dc01-4564-bac9-23051e2783a7}
  Status: Stable [1]
  Last error: no error

  Author name: 'Shadow Copy optimization Writer. "
  The writer ID: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
  Writer Instance Id: {a24b7ea7-e48b-44eb-9521-585648b7951b}
  Status: Stable [1]
  Last error: no error

  Name of the author: "COM + REGDB Writer".
  The writer ID: {542da469-d3e1-473c-9f4f-7847f01fc64f}
  Writer Instance Id: {b9b0674c-119c-4345-870d-fadc0e7beda4}
  Status: Stable [1]
  Last error: no error

  Author name: 'Registry Writer'
  The writer ID: {afbab4a2-367d-4d15-a586-71dbb18f8485}
  Writer Instance Id: {30a6302b-d5c8-4b9a-a0b7-61049e1c4767}
  Status: Stable [1]
  Last error: no error

  Author name: 'WMI Writer'
  The writer ID: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
  Writer Instance Id: {74ee0321-a546-4f94-a624-c715f2290db4}
  Status: Stable [1]
  Last error: no error

  PS C:\Users\Administrator > Get-VMIntegrationService - VMName

  VMName name active PrimaryStatusDescription SecondaryStatusDescription
  ------ ----                    ------- ------------------------ --------------------------
  Home time true synchronization OK
  House real Heartbeat OK OK
  Pair key / value of home Exchange real OK
  House real stop OK
  House VSS True contactless
  House Guest Service Interface fake OK

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet Hyper-V Forum.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverhyperv

  See you soon.

• Xbox live suspension

  Ive been suspended from xbox sound because someone was teasing that I suck at bo3 so I swore at him then when I went online on bo3 he says my profile can't live plays. Then, there was this application that got sent to me and read and he said I was suspended because of my past behaviour and my day of suspended privileges is today, but when I went back on it still saus on that I can't play live with my account please help.

  Hello

  Your Question is beyond the scope of this community...

  I suggest that repost you in the Xbox Forums.

  "Xbox a Preview program FAQ.

  http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ

  'Home'

  http://forums.Xbox.com/

  "Xbox forums.

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  _________________________________________________

  "Xbox Forums directory.

  http://www.Xbox.com/en-us/forums

  General

  • Home/FAQ/Forum policy

  • Community general discussion

  Material & Discussion Services

  • Equipment & Services

  Xbox support
  Agent hours: M - F 09:00-17:00 PT

  • Xbox 360 support

  • Xbox 1 support

  • Xbox on supported mobile devices

  • Xbox on Windows support

  • Networking of hardware information

  • Material information TV

  Law enforcement forums

  • Xbox 360 account Suspensions & Console bans

  • Account Xbox one & measures Console application

  Technical support of Xbox Live rewards
  Xbox Live rewards Squad hours: M - F 09:00-17: 00 PST

  • Xbox Live rewards program announcements

  • Xbox Live rewards Questions

  See you soon.