SX20 recommendation of external speaker

Similar Questions

• HP Pavilion 17 Laptop: laptop, usb external speaker iHome and HP Pavilion 27 x 1

  I have a HP Pavilion 17 laptop (Windows 8.1, x 64, AMD A8) and a HP Pavilion 27xi monitor connected to the laptop via HDMI.  Because the monitor has no Audio, I connected an external speaker from iHome usb/bluetooth to the laptop using the connection of headphones and usb connection.  It was scientifically and all was good until I installed an HP Support Assistant update (there were 2) - no sound so back to the restore point.

  I then installed 1 of the recommended updates (there were 2) and tried again.  Not ring again, so I disconnected the HDMI monitor and rebooted the laptop and got her through the speaker iHome. reconnected the monitor and the noise stopped. If I disconnect the monitor, the external speakers work fine!

  NO idea what to do.  I want the monitor (eyes do not reach 70 years but like the portability of a laptop).  Any help would be appreciated.

  Hope someone can help or help me find a solution (apart from the one I found) to get my screen sound and my PC.  Buying another monitor is not an option!

  Thank you

  yanceyg

  @yanceyg,

  Hello and thank you very much for posting.  For the most part, I think if it's not broken don't fix it.  The restore point and then do not run update again.  If the system worked great before the update fails after that means that updates are causing a conflict in the system.

  If there are updates available is not something that needs to be done unless you've met material which emits the updates correct.

  The next option is to go and manually remove the drivers for the sound and HDMI support.  Do this safe mode.  Enter safe mode by pressing F8 at startup.

  In safe mode, you can remove the drivers and then start again under windows with the drivers passed then perform updates and see if they play with them right here.

  Please let me know how things are going.

  Thanks again for posting and have a great day.

• I have no sound from the external speaker

  I connected this morning my iPod in my car, as always. But today I got the only sound from the internal speaker and no sound from the external speaker in the car. So far I have never had problems.

  How did the car system connected to the car?

• Satellite A350-how to disable the speaker internal while external speaker jack

  Hi all

  Anyone knows how I can cut the House speaker while connecting to the external speaker?
  I want to use my laptop in libuary, but when I plug in the headphones, the speaker still his, when I put in muted, the speaker and the headphones the two silent.
  How can I configure the silent speaker, while external speakers can only keep silent?

  > Knowledge how can I mute the speaker internal while connecting to the external speaker?

  I guess you have a Realtek sound card and Realtek HD audio Manager should appear in Control Panel.

  Please check this Realtek HD audio Manager.
  The speakers on the right tab, you will see the options analog & digital.
  Right click one of the option and check if you could see a few options that provide a framework in order to mute the speakers.

  You will also see the option called: the advantage of the device settings.
  Check this box too.

  PS; my laptop automatically the internal speakers if the headphones have been connected.
  I read in other threads that update the audio driver might help too, but first test the settings as mentioned above.

• Sounds appealing entering the external speaker

  Hello

  Lately, some incoming calls automatically on external speaker. I assumed that my finger at random or cheeks lit. But some people have had the same thing on XT926. This is a problem! You know it's so shame when your pnone speaks loudly. BTW, the removal of the Viber application is not solution. Any ideas?

  Thank you!

  They say that this problem is solved!

  http://code.Google.com/p/chromium/issues/detail?ID=353000

• Built in speaker does not work when I pull the external speaker cable

  I have 2 speakers system and external speaker. My external speaker are out of order, so I pull his cable system but now built in speakers are also not working. Volum icon shows with cross and no speakerphone and headset available. Any solution

  Hello
  When you said "pull the cables" do you mean deleted the connection to the motherboard / sound?
  1. make sure that each connection is connected.
  2 reinstall the audio drivers.

  Click on Start , then Control Panel

  Select the material and audio and noise
  Under playback.. What icons you see?
  Click Properties and then click headset/speakers
  According to the levels... is at 100% and not CUT?
  Under Advanced... What is the default format?
  Click test... do you get a sound?

  b Eddie

• When I play a DVD on Windows Media Player I get almost no noise through the external speaker on my laptop

  Original title: no volume when playing DVDs

  When I play a DVD on Windows media player I get almost no sound through the external speaker on my laptop. I get some, but it is too weak to really enjoy the movie. If I use headphones I can hear the DVD very well, and I can hear the clips DVD sample provided with my computer on my speakers and headphones. If the computer can generate the volume correctly, but something goes wrong, whenever I try to play a DVD that is not on my hard drive. I tried every button volume already. Thank you

  Hi amorchien,

  1. He played very well earlier?

  2 have you tried to play the DVD in another computer?

  Step 1:

  In Windows Media Player.

  a. click on tools and select Options

  b. click on devices and click on DVD, then select Properties.

  c. make sure that Rip and playback are in digital mode.

  Step 2:

  This problem can be caused by incompatible codecs. I suggest that remove you / uninstall all installed third-party codec packs, players or video record programs.

  Codecs, frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

• Conexant HD audio presets and the external speaker connections

  I have some doubt about this problems with queries?

  My laptop configuration:

  Name: Toshiba C640-I4014

  Processor: Intel Core i3 2330 M

  Audio driver: Conexant SmartAudio HD

  Audio ports: two (1. Helmet 2. MIC)

  Speakers: Built-in stereo speakers

  Outdoor speaker of Philips 5.1 multichannel (3 Ports = 2.1 channels, channels 5.1, Center)

  After obtaining this devices were struggling on the connection of the external speakers with my laptop computer ports. First of all, I have connected the headphone portable at the port of philips 5.1 via the single cable after that that I had very low noise in the REAR speakers only done even do not climb on the subwoofer bass and other stakeholders like 2 ubiquitous speakers. Then,

  I connected the laptop headphone philips 2.1 unique cable port. Now I'm getting all the sound speakers and subwoofer with 2.1 channel sound, but it does not work 5.1 channels multistreaming.

  Then I thought that it will work connection is.

  Port of portable headphones = on Philips Exteranl 5.1 speakers 5.1 channel port

  Computer laptop microphone Port = port channel 2.1 external speakers Philips 5.1

  None = Center port external speaker Philips 5.1 speakers

  Then, after I tried to configure the Conexant HD SmartAudio driver, here's the problem,

  Problem 1:

  Conexant Audio software is not configuration of the external speakers

  For Ex: Two streams available on this audio driver

  * Classic flow

  * Multistream

  Here, if I chose "Multistream" his does not work with external speakers connected laptop after removing the external speakers of his work with portable speakers integrated with multistream. But if selected with the mode 'Classic Stream' his work external speakers with subwoofer with all speakers even time and sound. But I need a 5.1 multichannel sound. I don't get this sound on my PC laptop Toshiba c640-I4014 with philips 5.1 speaker.

  Problem 2:

  Conexant SmartAudio HD speaker settings,

  If connected to the port of the external channel speaker 2.1 also its projection on the headphones plugged symbol

  If connected with port channel 5.1 external speakers not working not properly.

  If connected with External headphone with MIC as its projection on the wired headphone symbol

  After removing the cable from the speakers external then driver Conexant HD SmartAudio only displays as speakers connected symbol in the driver software. Its average single speaker connection working with built-in speakers or what?. If I tried connected to external speakers its projection in the just connected headphones.

  After these problems, I have a doubt on my laptop and speakers with drivers,.

  1 Toshiba C640-I4014 computer laptop support 5.1 channel speakers?

  2 driver Conexant HD SmartAudio will support 5.1 channel speakers?

  3. why "Multistream" Mode does not work with the external speakers connected to the laptop?

  So please read over problems after so help me on this question...

  Thank you!

  Kind regards

  Jayasudhan S

  Hi Jayasudhan S

  I'm glad that my solution was helpful for you.  Please could select the YES checkbox

  All the best

  Mary Julia :)

• Play sounds simultaneously through internal and external speaker

  I am using Windows 7 on my laptop. I want the sound to play through the computer laptop internal speakers but also external device to THE (such as headphones or additional speakers) to get some sort of effect surround sound.

  I know it's physically possible , because it has already happened by chance, but I don't know how to reproduce the setting. How can I configure sound to do this? Do I need additional software to do this reliably? or do I just set up the parameters correctly?

  Thank you for your time.

  Thank you. In fact, I found a way to do this, though in a different way. However, the method to THE I am unable to reproduce even though I know that I did accidentally before. I tried to plug it, but as soon as the contacts based on the card, the computer has already routed audio signals on non speaker...

  In any case, I have the thing of audio system / speakers Realtek driver. He has the stereo mix (in the recording devices section). What I ended up doing was using the machine, making it a copy of all the sounds that my computer, and send it through a different exit. In my case, I sent it to my screen via HDMI. (To THE does not count as a 'different' output, so connect a auxiliary disables the built-in speakers). Then at the back of my screen, I have connected my external speaker to THE.'

  The foregoing seems complex, this is a clarification of what is happenning:

  -Sound plays through speakers

  -Stereo Mix of Realtek audio copy and forward it to my HDMI screen

  -Display transmits the audio signal to external speakers to THE.

  It's the only way I found to do this effectively, however, there is a slight delay on a fraction (maybe half?) of a second. So the external speakers are a little late compared to the built-in speakers.

• transformed into external speaker output jack external microphone input!

  Hi, 2 weeks ago, I bought a HP Pavilion dv4-3006tx. I tried with 3 different microphone to the laptop but the microphone does not work. The microphone to work on other computers. There is no problem with the microphone. In the sound control panel, the external microphone is displayed, so I guess that the pilot detected an external mic, but it's not. Here's what I've done so far to solve the problem:

  (1) I've updated the driver from the HP website with the latest driver. I consulted HP online agent.

  (2) I've updated the BIOS with the latest version of the software. I consulted HP online agent.

  (3) I checked all devices in the sound control panel and the external microphone as default communication device.

  (4) I checked the external microphone volume in the world. The volume is maximum.

  (5) I reinstalled the audio driver.

  (6) I tried to use a linux ubuntu on this laptop to check if a problem persists, and Yes, the external microphone still does not work.

  (7) I tried google several days on this subject and I found nothing. Perhaps no one is facing the same problem like me. That is why I would get help from HP here.

  The internal mic works fine only problem with external mic. There are two jacks on the symbol of a laptop labeled for external speaker and another for external microphone. What's funny here is that when I plugged 3 helmet both decision they come to produce sounds. Is this a hardware error? Any other solution that I can try?

  Hi Maxi32,

  The port of microphone on your model is designed for a headset microphone.

  This port also works as a headphone port - it works as expected.

  Here is a picture of the support page for your laptop:

  

  Generally, these types of microphones have three black lines on the connector instead of standard for microphones and two for the headphones.

  This document is for Mini series, but it's the same type of port:

  http://support.HP.com/us-en/document/c01633145

• Recommendation for external monitor for 2009 17 "MBP

  Hi all

  I would like to get an external monitor for the time where a 17 "display is not quite big enough, but is there a limit on the size I can go? And with a 2009 MBP, would be a 4 k screen work?

  The specifications of my MBP is: 17-inch, early 2009, processor Intel Core 2 Duo 2.66 GHz, memory 8 GB 1067 MHz DDR3, NVIDIA GeForce 9400 M 256 MB graphics card

  I'm happy to find an opportunity that A1082 Apple display 23 ", but maybe I would go a little bigger. Used Apple screens are starting to become a bit expensive when there are more than 23 ", so I consider sacrificing the aesthetics of the product and get a monitor not Apple to about 27"... could anyone recommend any specific model?

  I will mostly use the screen for the design work (InDesign) and surf, so that I don't do high range editing, I'd still like the colors to be accurate enough.

  Any help is appreciated!

  Markos

  the resolution maximum support from outside is 2560 by 1600, the resolution of the movie screen 30 inch apple.

• Music added to the slideshow in Lightroom 6 will not play for external speaker.

  Hi all

  Hope someone can help me with this annoying problem.  The music I add to a slideshow LR6 won't play through speaker external (it will play only speaker macbook air)

  I use macbook air on 10.9.5.

  The speaker is EU Boom - bluetooth.

  He doesn't have a problem with the connection that I can play music from iTune, all just not via lightroom.

  I have the same problem. Lightroom 6, Mac OS10.10, Sony Bluetooth speakers. Have you found a solution?

• Bluetooth will not connect to an external speaker...

  First time on this glitch. A single application refuses to use the Bluetooth to connect the speakers already running and local trips within the iPad 9.7 Pro speakers.

  Weird to say the least. I didn't think it was possible. App is Auria pro. Speaker Bose Soundlink is 3. There is too much lag so at noon on THE Bluetooth. Unusable in the record. Air play in particular advice from noon. There is so little data. Is not supposed.

  This app is the only one to date at the time. Latency is perhaps too for the program to even consider reading. I went on every single setting in the six pages of configuration.

  Is not an application taking control where audio passes unusual?

  Thank you

  I guess that's...

  Because it is located in the app, I suggest that you contact the developer of the app... maybe an update is necessary.

  Barry

• Can you recommend an external case for hard drive of my iMac?

  My old A1312 27 "iMac died, but I think the hard drive is good. I want to take it out and use it as an external drive. I don't know what the case of to put in, there is an amazing range of options.

  Any help would be greatly appreciated. Thank you.

  OWC sells quality pregnant USB https://eshop.macsales.com/ if you will use for purposes of general storage/backup with a new USB3 Mac is what you want. If you plan to use as a startup or work projects drive you might want to consider love at first sight.

• Satellite M300 - external speaker buzz

  New Satellite M300. Internal speakers work fine.
  Plug in external speakers or headphones and there is a VERY loud humming noise (sounds like radio static noise) and a very low sound from the source.

  What is a sound card configuration problem?
  How should I do? What is a defect in the computer?

  Have you checked all the available sound settings or not?
  Did you also check player settings?

  Bad general condition is for me? Are you listening internet radio? What are you doing exactly?