Synchronization of constantly & long term internet time servers

Similar Questions

• Windows Vista will not synchronize with internet time server

  I am running Windows Vista Business SP2 and Norton Internet Security on a Lenovo T61.  All updates for Windows, Norton and Lenovo have been applied.  When I try to synchronize with a time server Internet, I get the error message ' year error occurred while synchronizing with time.windows.com "I tried each of the other servers listed time and still get the same error message.  I spent reviewing the configuration of the firewall in time of Norton Internet Security and S32 and port 123 are enabled.  I tried to synchronize with the two Norton Internet Security Firewall on and outside, with the same results. I have internet google and looked for a solution of Microsoft.  After reading all the posts relating, I tried the following:

  running administrative invite

  net stop w32time

  w32tm /unregister

  w32rm /register

  net start w32time

  Each performed positively.

  This has not solved the problem.  I then ran:

  w32tm/config /update

  This is performed in a positive way.

  This has not solved the problem. I then ran:

  w32tm/Resync /rediscover

  He responded with "the computer did not resync because no time data was available"

  I then ran:

  w32tm/query/status

  He responded with "last successful synchronization time: not specified.

  The local Group Policy Editor reads for providers of Service/Computer Configuration/Windows Administrative Templates/time/system time

  Configure Windows NTP Client not configured

  Enable Windows NTP Client not configured

  Enable Windows NTP server not configured

  In summary, it seems that my computer has never synchronized with an Internet server time.

  If you need additional information, please provide specific instructions on how to get it and I will provide.

  From time to time, I checked to see if I resync of internet time.

  Out of the Blues started windows resynchronize.

  The only change I can think is that AT & T reset head of communications AT & T defaults shortly before he started work.  This tends to confirm my opinion that it was a problem of communication.

  PROBLEM SOLVED!

• Windows 7 will not synchronize with internet time server

  Windows 7 will not synchronize with internet time server

  Had to go to services.msc and allow the windows time server to access the computer. Go to run and type services.msc hit enter, do scroll down to windows time server and more he probably stopped, just restart. Thanks to you all

• The Internet time synchronization

  Running Windows 7 on a laptop Advent.

  Whenever I try to sync to a site Internet Time, I get the message indicating that the connection is exceeded. What is going on?

  Try this address NTP:

  pool. NTP.org

  

  See if it works.

  If not, check the DNS settings you, your time zone settings, etc.

• Function 'Internet time' will automatically refresh after reboot - please help

  I can't get the "Internet time" auto time update function system after restarting the computer in windows 7.  He should tell me when the next synchronization will happpen, but this isn't unless I do it manually by clicking on the button update.  Then he went after the reboot.

  Example: If I click on the clock at the bottom right of the screen and then select "Change date and time settings" and then click on the tab "Internet time" he says: "this computer is configured to synchronize automatically with"time.nist.gov.  Then on the next line, he says: "this computer is configured to synchronize automatically on a regular basis.   However, I checked that he never does that.  Or he tells me when he is going to do.

  To temporarily solve the problem, I click on the "Edit settings" button and then click on 'Update Now' and he said, "the clock has been properly synchronized with time.nist.gov on 15/03/2010 at 22:25" for example. I press OK.  So far so good.  Now the tab "Internet time" has a line that reads, "next synchronization 16/03/2010 at 02:25.  Which is 4 hours later, because the specialpollvalue registry variable is set for 4 hours.

  THIS IS WHAT I WANTED!  But the next time I restart the computer and check under the tab "Internet time", it comes back again tell me what is the next synchronization.  And the problem comes back to where it will not refresh automatically.   So reboot he kills.  All this works fine on another computer with XP.  But on a new, clean installation of windows 7 that is not.  Am I missing something?  Is there a setting I need to adjust so that it can stay active after restarting?

  Time Service Tools Windows and settings
  http://TechNet.Microsoft.com/en-us/library/cc773263 (WS.10) .aspx

  At the end of this document are details on recording the time of Service.

  Regarding-

  "SpecialPollInterval".
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpClient

  Version
  Windows XP, Windows Vista, Windows Server 2003 and Windows Server 2008

  This entry specifies the special poll interval in seconds for the manual counterparts. When the indicator SpecialInterval 0x1 is enabled, W32Time uses this interval instead of a poll interval determine the operating system. The default value on the domain members is 3 600. The default value on stand-alone clients and servers is 604 800. »

  Maybe you will get better results if you set the default value for domain members (3600), rather that I assume you have set for the 2400?  He may not know your adjustment because he runs into some unknown to me, another setting?  I guess you did not literally any value to read "4 hours" instead of 2400 decimals or whatever is the equivalent of Hex, did you leave in any commas in the value?  Sorry for asking that, please don't be offended by the question, but more strange things occur.

• Can I remove my office homegroup icon without damage in the long term?

  Then the homegroup icon made its way onto my desk. I can't delete it or move or hide it in a folder. Is there a way to remove it with ruin them my phone? I have a Dell Inspiron running Windows 7 Professional, if that helps. Earlier today, I don't see the icon, and I don't know why it would just appear on my computer now. I want that he went, his to the valuable assistance of the place and I'm afraid it might be a virus too. Help me please!

  I just need to know if removing will harm my computer and cause damage in the long term. My computer will be open to other people when it is deleted? I'm on the internet all the time and the last thing I downloaded as the DayZ Mod for ARMA 2.

  Homegroup Desktop Icon - add or remove the
  http://www.SevenForums.com/tutorials/34580-HomeGroup-desktop-icon-Add-Remove.html 

• A USB at low prices is not acceptable for long-term backup storage?

  I'm close to the graduation of my night school. Subsequently, I plan to upgrade my MCSA & MCDST MCITP and MCTS certifications. I use the ability to download all the stuff of Dreamspark while I still qualify so I'll still have access to the server.

  I would normally just burn these images on cd/DVD, but with virtual machines, it is generally easier to use the .iso images. I need a way to save as well as (stored in .txt files) product keys. I'm looking for the cheapest possible solution.

  Buy a USB hard drive for $50 at a "back-to-school" sales stories Office Supply would be viable for the long term storage? Those who are not really designed to be WORMs where I write once, and then paste it in a safe place with my original disks/CD/DVD (all since 1989) until I have more software to back up.

  In my opinion, a backup tape would be too expensive for my needs, flash drives large size are also expensive, DVD are too small or silly to burn a DVD with a single. ISO image.

  So buying an external hard drive seems the cheapest solution, but how that will hold up over time? I think it is bad that the reader will be much used and rest in a unique, rather than be spun position regularly.

  Don't forget that "backup" deduced it is a * second * copy data - not your original copy (only).

  He'll resist quite well - as long as it is not being abused.  Sitting didn't seem to affect one of the readers that I have 5 + years.  Plugged in recently when I found it.  It was one of them:
  http://reviews.CNET.com/external-hard-drives/Ximeta-NetDisk-80GB/4505-3190_7-30734045.html

  Yes - I got when it first came out.  Seems small now - I have an eSATA/USB 64 GB flash drive that holds 64GB.

  Your concern brings up the fact that it shouldn't be so important to you anyway - if you don't think you'll use it very often. ;-)

• How stable is the long term outputs analog USB-6008?

  The USB-6008 datasheet do not specify the stability long term of the analog inputs and outputs.

  I'm looking for stability compared to the ambient temperature and time (several months to a year), mainly for the outputs or the D/A reference voltage.

  Is there any information available?

  Thank you.

  The precision specification takes into account the evolution both because of the temperature and duration (stable).  Thus, for the period of a year that we guarantee these specifications, which list you is correct.  However, apart from the period of one year since the calibration, this specification may be is more inaccurate.

• Why my pc is not snychronize with the internet time server /Keeps saying the peer is unreachable

  My pc will not snychronize with the internet time server, how can I fix this problem, also says peer are an affordable is a firewall block perhaps?

  I would like to ask what time servers, but the following links see the/you tell how to change as you point to the servers time NIST.

  http://www.nist.gov/PML/div688/grp40/its.cfm

  http://TF.nist.gov/TF-CGI/servers.cgi

  HTH,
  John

• I want to increase the frequency with which my laptop computer's clock is set automatically by contacting an internet time server.

  I want to increase the frequency with which my laptop clock is set automatically by contacting an internet time server. In XP, there is a registry setting for the number of seconds between contacts with a time server. Where is this setting in Vista Home Premium 64-bit?

  Hello

  I'm in Seattle and generally use time of Microsoft servers

  This is a list of time - stratum servers 1 and 2 levels.

  A list of time servers Simple Network Time Protocol (SNTP) that are available on the Internet
  http://support.Microsoft.com/kb/262680

  World time server
  http://www.WorldTimeServer.com/

  World time server - Seattle (online)
  http://www.WorldTimeServer.com/current_time_in_US-WA.aspx?city=Seattle

  The State of Washington
  http://www.WorldTimeServer.com/current_time_in_US-WA.aspx

  The naval Observatory time
  http://www.usno.Navy.mil/USNO/time

  This list, the phone number for time to Naval Observatory, CO - + 1 719 567-6742 (Colorado Springs)
  and there is more information and links.
  http://Wapedia.mobi/en/United_States_Naval_Observatory

  Sorry, no info on the atomic clock at the phone number. Maybe try your favorite search engine.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP Officejet 8000 - long-term storage

  Can anyone advise on the correct procedures for storing long-term Officejet printers.

  We have 24 printers altogether and use them in batches of 4 only for a week, they are stored until they are shipped to another location to be reused for a week.  Total time in storage could be 6 months.

  I don't want to print head and ink problems, replacement print heads and ink isn't ecenomical - its cheaper to buy a new printer.

  Hi Ian_JJ,

  You want to ensure is that printers are off using the power button. In this way, that the print heads can be installed on the service station. If the print heads are not well installed on station service that is when you can expect to get the ink dried in the print heads. This printer cartridges are there just to provide the ink to the print heads. Let me know if you need help.

• Long-term headless app work: QTcpSocket receive do not

  We have an app without long-term head that uses sockets for IPC.

  Headless part contains a QTcpServer, the user interface of the QTcpSocket.

  the code without a head:

  server = new QTcpServer(this);
  bool ok = connect(server, SIGNAL(newConnection()), this, SLOT(onNewConnection()));server->listen(QHostAddress::LocalHost, m_port);
  

  user interface code:

  bool stateOk = connect(clientSocket, SIGNAL(stateChanged(QAbstractSocket::SocketState)), this, SLOT(onStateChanged(QAbstractSocket::SocketState)));
  if (!clientSocket->isOpen()) {
      clientSocket->connectToHost(QHostAddress::LocalHost, m_port);
      bool conOk = connect(clientSocket, SIGNAL(connected()), this, SLOT(connected()));
      bool disconOk = connect(clientSocket, SIGNAL(disconnected()), this, SLOT(disconnected()));
      bool readReadOk = connect(clientSocket, SIGNAL(readyRead()), this, SLOT(commandReceived()));
      bool errorOk = connect(clientSocket, SIGNAL(error(QAbstractSocket::SocketError)), this, SLOT(error(QAbstractSocket::SocketError)));
      Q_ASSERT(errorOk);
      qDebug() << "connected to server socket";
  }
  

  output debug shows headless headless app is running constantly, the signal is properly connected, the socket for the server returns isListening() to true.

  debug output of the user interface shows that all signals are correctly connected, and onStateChanged goes from HostLookupState to ConnectingState and finally to ConnectedState

  At this point, I'd wait the server socket to pull the signal of newConnection, but alas, it isn't.

  I generate and run the xandos example and it works correctly, but it does not long-term use and has the server in the user interface, while the part without head connects.

  I suspect that the app without head doesn't have an event loopand QTcpServer documentation states:

  Although QTcpServer is mostly designed for use with an event loop,it's possible to use it without one.In that case, you must use waitForNewConnection(),which blocks until either a connection is available or a timeout expires.
  

  Now I wonder:

  The long March without head app has an event loop?

  If this is not the case, how best to use the blocking call without disabling the rest of its features? A thread?

  Write that post little got me on the right track already, a problem merging caused the socket to the server must be started before you call the constructor of the Application (which provides the event loop).

  Now the server is running, receive a few orders, then she stops unexpectedly, the fires of the user interface
  QAbstractSocket::RemoteHostClosedError changes the State of ClosingState and UnconnectedState

• Script of long-term slow down my computer.

  OT: Long-running Script.

  I have a Windows 7 laptop. I get the message that I have a script of long-term slow down my computer. What exactly is that and how it stop?

  Could you give a little more detail please, if possible. For example when these pop-up messages? you're in a browser (Internet explorer?) when they occur, or do they appear just when you have nothing open on your desktop?

  IF they pop up when you use Internet Explorer, have a read of this to see if it gives indications - https://support.microsoft.com/en-us/kb/308260 (unfortunately, it's pretty long).

  Alternatively, you can try to disable the IE script debugger, but maybe it's more to hide the fault rather than fix, assuming it is useful at all.

  Open IE, tools, Internet Options, [Advanced] tab, click on "Disable Script debugging (IE) press OK, close IE and re - open it to see if its helped." There are also "Disable script debugging (other) to try to see if that helps." If they do not help, reset them.

  If this doesn't help not or if you need further assistance, please post back and someone will try to help.

• Windows 7 Internet Time update registry hack and RealTimeIsUniversal (UTC)

  I think I discovered a problem with the internet time synchronization when RealTimeIsUniversal registry key is set to 'true '.

  In a default of Windows Setup, the time clock (RTC) real is supposed to be in local time. If you synchronize to one hour of the internet server in this default configuration, once the time is synchronized Windows will rewrite the exact time in the CMOS RTC as expected.
  However, if the RTC is in hour UTC and you have activated the key RealTimeIsUniversal, the exact time is is more written in the CMOS RTC after the internet time synchronization. You can still synchronize to an internet time server and the time will display properly for a short period, but time is not written in the CMOS and usually less an hour the nucleus will be re-read (incorrect) the CMOS RTC time and your stay will be distributed. There seems to be no way to get the correct time from a time server to write in the CMOS RTC.
  Is it possible to fix this so that the exact time is written to the RTC when you set to use UTC?

  Hey doctor Gonzo,

  I think that Rohit was trying to help out you, and your question is a comment of developer-oriented. Such questions are better suited for the Microsoft TechNet site. I pulled the link for you and found a good article to start.
  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads
  Microsoft does not support the change, the registry key because the results could be so harmful if a mistake has been made. Just felt that it was important to say. Thanks for posting of Microsoft Answers!

• Windows 7 - date/clock will not automatically be synchronized with the internet time

  Windows 7 - date/clock will not automatically be synchronized with the internet time

  Please help me solve this problem...

  every time I can't manually change the date and time...

  If the time server internet will not synchronize the clock, select 'Change settings' and choose a different time server from the drop-down list.