system does not recognize the CD drive

Similar Questions

• Western Digital WD10EARS internal hard drive Caviar Green 1 TB - my system does not recognize the new drive

  I recently bought a computer Dell 4700 to a friend with Windows XP installed. I've updated the memory to 2 GB and now seeks to install a WD10EARS 1 TB harddrive. The new works of fine memory is not the hard drive. My system does not recognize the new drive. I contacted WD for help and they told me to try diferent rider combinations that were Jumper 1-2 and 5-6, still does not work, I checked the hardware compatibility list and he said he would start uo without modification. This isn't. I would be very greatlyful for any suggestions, to HELP!

  I've had several people tried to help me solve my problem. They were all, I thought, more than I am computer savvy. As time progressed, solutions became more complex. After they all left without resolution I thought and it appeared to me that the simplest solution might be correct. One person had checked. I turned on the computer and when the Dell logo came I pushed the F12 key to open the Dell configuration screen. The drive on which the new drive has been installed has NOT been activated! Duh! I activated the he and the program Acronis recognized and everything went like clockwork after that. Phew! What relief! Thank you for your comments I am just glad that my problem it doesn't require resolution. Are Mod

• Recovering the Windows system does not recognize the hard drive

  Computer does not recognize the hard drive when booting.  Guard gives me 1782 disk error.  Then try to use the ROM installation thing and throw a disc hard test there is no option to test anywhere.  Computer was working fine this morning and then I stop when I turned it back on it was not properly start.

  I have a zt3000 running xp sp3

  someone please help me, thanks

  Hello

  Please reinsert the drive from the rear panel and check if the device detects the drive hard in case you have the same problem, then the hard drive is bad, you need to replace the hard drive and reinstall the operating system on the unit to return to its operating state.

• Lost in car-Windows xp does not recognize the slave drive

  I do reinstall xp home, no problem when I did the system does not recognize the slave drive I have.  As far as I can tell that it's all hooked up correctly.  When I go into disk management it does not recognize the drive either.  All of the suggestions.

  Hi james.williams,

  1. How is the drive connected to the computer?
  2. What is the number of the brand and model of the player?

  I suggest that you check the jumper settings and make sure that the jumpers are correctly positioned.

  Make sure they are in the two master/slave jumper and not cable select.

• my pc does not recognize the cd drive. I tried restoring the system without success.

  Windows does not recognize the cd drive

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• does not recognize the flash drive. I get a code 28, pilot not available and the code 19 registry damaged. How to solve this problem?

  Original title: Pny flash drive problems

  I used my flash drives on my pc with xp as os without problem. I then took the same flash drive for my laptop with the windows operating system 7, I opened the files. Then I went to the computer with xp, and the pc does not recognize the flash drive. I get a code 28, pilot not available and the code 19 registry damaged. How to solve this problem?

  Hello

  Do you see these error codes in Device Manager?

  Plug the flash drive and run the Fixit of the article below and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  See also the section below, which might be useful in solving the problems of USB devices.
  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

• Dell Inspiron 531 s problem of power/does not recognize the hard drive

  My Office does not illuminate. I replaced the power supply. No, it powers on but does not recognize the hard drive. It gives an error as SATA 0 None SATA 1 no SATA 2 No. How do we know that the cables are properly connected. I feel like I'm very close to solving the problem but don't have a clue what that next step to follow

  The original PSU had 4 sets of cables and connectors.  The new power supply has 5 sets of son.

  aries7531

  From your post, I guess that the configuration of the system now recognizes the hard drive?

  If you do not have a floppy drive, then BIOS can find the player who isn't there, it returns this error.

  Make sure that the floppy drive [drive A] is disabled in the [BIOS] installation system, page 173, so that it is no longer looking for the disc and see if this stops the error message.

  If the hard drive is recognized in the configuration of the system, he now knows in windows "My computer" or in "disk management, [right click on 'My computer' and select 'Manage', then disk management]."

  Bev.

• Tecra S3: Installation of Vista does not recognize the HARD drive

  I try to install Vista Ultimate on my Tecra S3, but installation does not recognize the HARD drive.

  I tried to find the driver for Vista for my computer, but not found RAID.
  Tried it with XP drivers, but no longer works.

  Do you have an idea where I can download Vista drivers for RAID?

  THX

  Hello

  Your suggestion is good. The Tecra S3 supports the RAID, and the RAID driver is required to install the OS on the HARD drive.
  On the European driver Toshiba page I found a RAID for XP driver.

  I put t know if this driver will run under Vista, but I recommend to test.
  The RAID XP 1.3.8.0 driver version can be downloaded from this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Please note; You can store the RAID driver on an external USB and Vista should recognize it!

  Good luck

• Satellite A205-S4777 - XP does not recognize the HARD drive

  Hello!

  Recently I buyed a new satellite Toshiba A205-S4777 with Windows Vista home premium installed
  and I noticed too many errors in Windows Vista and the pc is very slow so I decided to downgrade to XP

  I want to directly install Windows XP but the installer does not recognize the hard drive or more exactly controllers!

  I nLite Sata drivers in Windows Xp Sp2, I bought on the microsoft.com site!

  Everything worked well.
  The Installer recognized fine hard and Setup finallased!

  But here's the problem when loading windows and try to pass on gorge yourself sort of blue screen one unreadable!

  And restarts and let, it does all day the same thing!

  I'm afraid that I have not nLite the right drivers.

  Is there anyone Heve downgraded this model?
  Thanx

  Hello

  Maybe you did not use good SATA driver?  :| Who knows
  The point is that there are two different versions of Intel Matrix Storage Manager supports different chipsets.
  I put t know what chipset is in charge of your laptop but you should check this and must also check the description of the Intel Storage Manager and check what chipsets are supported.

  In addition, you should have a look here in this doc from Toshiba:
  [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

  Good bye

• Qosmio F30 - 112 - Windows XP does not recognize the HARD drive

  Hello.

  I have a Qosmio F30-112.
  I tried to install the Windows XP Professional instead of the Media Center edition.
  However, during the execution of the installer, my laptop does not recognize the hard drive. Therefore, the installation cannot continue.

  I thought it might be a problem of corruption with my laptop and reinstalled Media Center Edition successfully.
  But when I try to install XP Professional it always gives me the same error.

  Suggestions for the configuration of the BIOS or solutions for why this is happening?

  Thanks in advance.

  Hello

  Just a question:
  You are looking for in this forum for other similar issues with regard to the installation of Win XP and lack HARD drive? I doubt

  The fact is that your notebook has a SATA controller and you need a SATA (Intel Matrix Storage Manager) driver.

  You should have a look here in this doc from Toshiba:
  [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

  and should also search this forum for other threads

  Good bye

• Satellite A30 PSA30E - BIOS does not recognize the HARD drive

  Hi all
  I have a Satellite A30 (PSA30E) and I start the computer. When I enter the BIOS it does not recognize the hard drive.
  Does anyone no what I can do?
  Is it possible to restore the BIOS?

  Thank you

  Hello

  You replaced the HARD drive by a new one or the BIOS don't recognize the old HDD?

  Usually if the laptop is not able to start and that the BIOS does not see the old HDD then I guess that the HARD drive is faulty.
  If the BIOS doesn't recognize the inserted new HARD drive and then either you ve bought is not compatible, or the size of the HARD drive is just too big.

  Please provide more info. You see error messages?

• Account Internet preferences system does not recognize the password for my AOL account... and so mail does not read the email in my AOL account

  Account preferences Internet system does not recognize the password for my AOL (Internet) account... and so Mail does not read the email in my AOL account

  Mail asking me to "Enter your password for [my AOL account] in Internet accounts."

  When I enter my password Internet accounts says it is "Impossible to verify the account name or password."

  iMac (24 inch, early 2009)

  Processor clocked at 2.66 GHz Intel Core 2 Duo

  Memory 8 GB 1067 MHz DDR3

  OS X 10.11.1 (B 15, 42) El Capitan

  Remove the password in Keychain Access (Applications/Utilities). While there, menu Keychain Access of relief.

  The problems of Keychain - see post of khati

• NSLU2 does not recognize the hard drive

  Hello

  I have a NSLU2 on Win XP SP3.

  It does not recognize the USB drives, he wrote that 'drive not formatted '. It only recognizes the USB key as "disk2".

  Current firmware is V2.3R29.

  When I try to update the firmware, the "not enough disk space" message.

  I tried the same disc on a different NSLU2 and it worked fine.

  What can I do my NSLU2 reading displays the disc correctly?

  Thank you very much for your help!

  Markus

  It seems to be a firmware issue... The V2.3R29 firmware. is quite old. The latest firmware is Ver.2.3R63... Hard reset the NSLU2, power cycle it and then try to update the firmware. After upgrading the firmware, reset it again and reconfigure... Disconnect the HARD drive before upgrading.

• Windows does not recognize the DVD drive at startup

  Laptop: Dell E6410 ATG wt / verzion A15 Bios

  OS: Windows 7 SP1 with the latest updates.

  The question I have is when I log on Windows 7, the laptop does not recognize the DVD drive. The reader will not be displayed in my computer or Device Manager. I can get around this physically ejecting the disc and reinsert. If I do this drive appears in my computer Windows and Device Manager. It will read DVDs and CDs fine. I am able to reproduce the problem above mentioned question if I restart the laptop. If I restart the laptop the DVD drive won't be recognized and reinsert the drive will get it appears again.

  This problem occurs if I try a DVD - RW drive and an old DVD - ROM drive. If I go into the BIOS before windows, I can see the BIOS recognizing drives ok but not when initially get into Windows without having to eject and inserting the disc.

  Thanks in advance for any help.

  I guess that this must be a hardware problem then.

  Seems odd.

  The only other thing I can think of, after reinstalling W7, is a BIOS problem eventually. A strange setting it may be an older version of BIOS with a bug in it. If you decide to update the bios, make sure that you get the latest version for your make and model PC and follow the instructions. You can destroy a PC with bad BIOS or update the procedure.

• My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader. Do you have any suggestions?

  My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader.  I have just upgraded to Windows 8 of Window Vista. Do you have any suggestions?

  Hello

  I see nothing unusual, except that there should be a "0001", or even "0002"...

  When you have made the registry change, you used the command line (Admin)?... the process may not work with the regular command prompt...

  Also, try to go to Device Manager, right click on your DVD drive, click on uninstall and restart.