System Fan (90 b) error. Laptop HP 1000 | Product number: C8C94P4 #UUF

Similar Questions

• HP laptop i3 1000 product number: C8C94PA #UUF problem with the graphics card drivers.

  I initially was running Windows 7 Home basic 64-bit on my laptop. The version of the graphics card is Intel HD 3000, I think. Following the crash of my windows, I installed Windows 7 Enterprise 64-bit. Now when I open the HP Support Assistant, it's my graphics card adapter Standard VGA Graphics Adapter. Furthermore, none of my games begin.  When I try to install the original graphics driver for my laptop, available on the internet, he said that my phone does not meet the requirements for the installation. All solutions?

  Yes.

• System fan 90 b error

  After 3 days because the computer and let me say that in three days I have not too much used, this error is out. So I tried to turn on the PC several times and even came out, after a few times the PC just started with windows loading upward logo, now, it seems that the problem is solved, but I ' m afraid this can appear at any time. Right now the PC works well, but after reading all the posts I'm starting to feel a little disappointed by this machine, what a shame, everyone thinks that HP is a good brand, but they are nothing more than a mask.

  Hello

  Fan

  Fan does not properly

  90 B

  The system fan may be faulty. For more information on troubleshooting heat related problems, see the fan runs continuously, the PC working slow than expected and generates the heat . It is also recommended that you perform a hard reset, because that can sometimes restore the system to the operating state fan. For more information, see reset and use, to solve software problems . If the system fan continues to fail, contact HP support.

• Laptop HP 650 start system fan 90 b error

  Recently I bought HP 650 for laptop, after a few I am now getting an error 'System 90 b fan' system at startup and then after 15 seconds, the laptop stops in return.  HELPPPPPP.

  Col. Taylor

  All you can hope is that the fan is blocked by dust or something. Find the fan (exhaust) and put a paper clip bent-out there to prevent the blades turn freely. Blow into the compressed air. If you are lucky it will dislodge a clog. The message means that the fan does not spin and it is stuck or bad. If it is bad, it must send in for service.

• HP Pavilion 17 Laptop: HP Notebook product number J5R50AV Touchpad - how to disable?

  PC laptop HP Pavilion 17 has a large Synaptics Touchpad that works well. Too good! The problem is that my wife hates. She can't stand it when he moves his cursor jump around and makes all his sentences clipped.  I uninstalled the driver but the touchpad still work? Short using the brute force method, how it is totally immune to any contact? It seems to be so sensitive. It's like she had feelings of hurt, but I can't do it just to get over. Fact lem? someone knows the solution for this prob. See that he just did it again. You know the old saying. Happy wife, happy life.

  OK, so I finally stumbled on the solution and it's pretty simple.

  1. Click on start and then type mouse in the search field.

• SYSTEM FAN 90 ERROR < b >

  I have this SYSTEM FAN error message about 4-5 months back, but I completely ignored and used my phone normally even if the fan system runs faster and getting stronger but it's gone too far and now-a-days huge amount of heat is emitted from the laptop and that he will become so hot and I can't same palce it my knees and if I try to play no matter what game the FPS are falling regularly and even play couln t I tried software SPECCY, it shows my CPU and RAM went up to 85 ° C.  so please answer

  HP Pavilion dv6 Notrbook PC product name

  Product QB365PA #ACJ number

  Serial number: xxxxxxxxxxx

  Thanks for any help you can provide in this situation.

  HPUSER_XXX wrote:
  

  I have this SYSTEM FAN error message about 4-5 months back, but I completely ignored and used my phone normally even if the fan system runs faster and getting stronger but it's gone too far and now-a-days huge amount of heat is emitted from the laptop and that he will become so hot and I can't same palce it my knees and if I try to play no matter what game the FPS are falling regularly and even play couln t I tried software SPECCY, it shows my CPU and RAM went up to 85 ° C.  so please answer

  HP Pavilion dv6 Notrbook PC product name

  Product QB365PA #ACJ number

  Serial number: xxxxxxxxxxx

  Thanks for any help you can provide in this situation.

  Hello

  I think you have to go for replacement cooling fan/heat sink assembly otherwise this could damage your board, processor, card, etc.

  Before that quickly please follow the steps in this document - cleaning the vents and fans on the laptop & troubleshooting steps:
  http://support.HP.com/us-en/document/c01657439
  
  If the document above doesn't work for you, then you might want to have the phone looked under warranty, you can call in-
  If you live in the United States, contact HP- http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you are in another part of the world, start here- http://welcome.hp.com/country/w1/en/contact_us.html
  
  I hope this helps you
  
  Thank you
  
  CLICK ON 'ACCEPT AS SOLUTION' TO HELP OTHERS WITH THE SAME PROBLEM, CLICK ON BRAVO TO APPRECIATE MY ANSWER *.

• Should I replace the system fan or any laptop?

  For the last day, I was doing some 90 b error code when I turn on my computer. It says my system fan does not work properly and could cause problems. If I continue however, it will work for about 7 minutes, and just turn off. The left back will be really hot.

  I called HP today and they will fix it for $180 & give me a 3 month warranty, but is it useful? My computer is only 2 years old. I could just replace the entire computer through my work. Should I repair or replace?

  It is a 15 "Pavilion amd8 quad-core, 8G RAM, 1 TB HD

  Moon.

  Cleaning would be easier to try.

  It is a G6 and you would have to completely demolish the laptop to reach the fan to replace it.

  

  Try clean it first.

  If this does not work, you will need to decide what is best for you.

  REO

• Pavilion g7 - 1280sb 90 b system fan error

  Hello everyone,

  2 years, I have a HP G7

  A few days ago that I suddenly got the error message that the system fan did not work as it should (90 b).

  When I got this message the fan was still running as usual.

  I dissambled laptop and saw that there was little dust. But it is all clear now.

  After that, it worked fine for a day (fan running).

  Unfortunate the day where he worked, I got the error message again.

  I tried a few times (3) at the start, the first and the second time that the fan is running. The third time is not turning at all.

  When I try again (4) it is not turn again.

  What should I do?

  (I'm sure that the fan wires are directly connected).

  I saw this article http://support.hp.com/us-en/document/c03620929 and saw a few possibilities:

  -remove the (successful) dust and he turns friendly when I try it with my finger.

  -hard reset (tried but don't know it worked)

  -update of the BIOS (don't know how)

  And sorry for my bad English,

  Thank you

  Frédéric

  It's a bad fan that needs to be replaced. You've done everything else avoid this step.

• System fan failed error after the Swap case

  Hi, I read a number of similar positions on this issue but has not managed to solve my particular problem and was hoping someone can provide additional guidance

  I recently moved my HP Pavilion Slimline S5280t with a Cooler Master case, everything is OK except that I now get a 'system fan failure, press F2 to continue "message every time I start the PC.

  I know for sure, it is caused by the rear 120mm fan that connects to pin 3 connector on the motherboard chassis fan (I tested it with the old 92mm fan and the error message disappeared).  So based on what I read on the forum, the simplest solution is to disable / adjust the configuration in the BIOS to monitor fan, unfortunately, this option is locked to my motherboard (IPIEL-LA3) model.  If at this point, I have 2 questions regarding what I can do next:

  1. I guess the fan sensor detects for the fan RPM so since this is a 120 mm fan, the speed of ROTATION is less than a 92 mm.  It does not reach some predefined threshold and that's why the error message I received.  So I can solve the problem by exchanging the 120mm fan which runs at a higher SPEED?

  2. I read that there is a hidden menu of BIOS with some of the HP PC, accessible by pressing F11 (or some other keys that do not appear in the original start menu), I have tried F11 and which has become a diagnostic tool, does anyone know if a hidden BIOS menu exists for my particular model? (PC model: S5280t, q8300 CPU, Mobo IPIEL-A3)

  In addition, I don't think that there is an update of the BIOS for my model either... so I'm really out of options here.  Please help if anyone has any suggestions.

  Thank you!

  HW7777, welcome to the forum.

  After consultation on your problem with Erico, another Member of the forum, here's what I was told:

  "The three-pin connector for the fan has + (power), mass (-) and an analog tachometer signal." Given that you have tested the old fan on the system fan header and the error message disappeared, you have checked that the fan is indeed the question. You should try another fan to see if it did not have the rear case fan which is connected to the Sys_Fan?  If produce the same results, then you have reason on the down low, the origin of the problem.   If you want to keep the motherboard in the case of Coolermaster then you should consider making or buying an adapter to mount it in her 92 mm fan. Since the Coolermaster case is much larger, you should be able to mount the fan somewhere. There is a lot more air in the Coolermaster case compared to the business slimline the mobo was originally in. "You are right that there is no update available BIOS.

  If your problem is solved, please click "accept as a Solution.

• Issue of fan of HP G62 laptop, fan no longer works HELP

  Basically, I have a HP G60 laptop and cleaned my fan of compressed air and it stopped my laptop computer overheating etc. etc.

  HOWEVER, my other half has a HP G62 laptop and its fan is STRONG and is about to overheat and stop.

  So I used can of compressed air to clean his fan BUT he completely stopped turning and now I get the error message saying that the fan is not functioning and is not advised to continue with normal use.

  I can get on windows. but compressed air (which EVERYBODY recommends) seems to have completely either broke the fan the fan or the dust blown away and arrested.

  After several attempts to reboot it came the short do this ticking noise as if the blades have reached something like it leader (who was slow I might add).

  Maybe WHAT the bios has detected the fan was blocked and stopped trying to turn? I don't know that I need help or advice before I dismantle it to clean the fan manually.

  I know it's quite tedious to an amateur. fans should be the easiest thing to take the most difficult step, but oh, well...

  HELP PLEASE

  Above all, the "right way" consists of disconnect everything (power, battery, any external devices).

  using short, clean air, chips

  blowing in the direction that the fan is running normally.

  It is possible to make a bad situation worse, of course, but nothing could possibly have a similar end result: laptop on the work table.

  Trying to fix something is a good thing in my book.

  Failure is never the result of the test, the failure is the result of inaction.

  Replace the thermal paste goes beyond to replace a fan. This works.  It may or may not be a DIY project.  As long as you don't actually damage the harddrive (s), at least the data must be secure, even if you damage more the system.

  If the girlfriend isn't happy, all things in the universe may end up like the fan.  You could ask him how she wants to go forward - it is his cell phone, Yes?

  I do not give advice to hard core on the material, I do not see; I hesitate to give that advice on hw I can see if it's not mine.  I have backup systems - if you don't (and therefore cannot do without this system for a long time if you can't fix it fast), then you can consider having the box repaired by a person who is not personally involved.  It might be much less traumatic.

  No matter what you choose, make sure that everyone is in agreement on the action plan.

  No matter what you're doing next to what happened to bring you here.  The smile.

  BTW: I'm a firm believer in coolers for laptop.  Something to consider for later... You can do a search on my many posts on the subject.  I tend not to "go" on the subject.  The smile.

  Good luck!

  ----------------------------------------------------------------------------------------------------------------

     Click on the star of white Kudos on the left to give Kudos for assistance.

  Please click "accept as Solution" to say the problem is solved.

  Always include: (Computer) product number , printer - model number ,.

  Never give your serial number

  ----------------------------------------------------------------------------------------------------------------

  2012 the year of the Dragon!

• Satellite A300D-135 - BIOS - System Configuration data read error

  After starting a Satellite A300D-135 laptop computer, the following error message appears:

  
  3070M extended RAM passed
  512 KB of L2 Cache
  System BIOS with a shadow
  Video BIOS with a shadow
  ATAPI CD-ROM: TSSTcorp CDDVDW TS-L632H
  Fixed disk 0: TOSHIBA MK2546GSX
  Initialized the mouse
  ERROR
  System Configuration data read error

  Press to resume, installation

  After pressing F1 the machine starts Windows, very well, but the error message is quite irritating, while it comes with a loud BEEP

  I tried the following things so far (in that particular order):
  -Load BIOS default
  -Flashed the BIOS with the latest version of the BIOS (2.80) for this type of model
  -Reinstalled windows with HARD drive format

  All the these did not work.

  I saw the same message appearing on several places on the internet (on different laptops with a Phoenix BIOS in common), but so far I have not been able to find a working solution.

  It might me a hardware problem, but all devices (vga, soiund, lan, wifi, usb, hdd) seem to work perfectly under Windows, so this does not seem the question). Another solution that is mentioned in some forums, replace the battery. But because the phone keeps time correctly I don't think it's the case either.

  Any ideas?

  Kind regards
  GJ

  Hello

  The POST (power on self-test) BIOS checks and detects errors on the motherboard.
  I think it has something to do with the hardware on the motherboard problem.
  I doubt that you can solve this if update of the BIOS and the BIOS default settings didn't change that.

  What to say; I think that the technician of the ASP should run tests to check what's wrong or what cause this I think it is question of s mobo.

• The system fan is out on PC... need info. to replace

  Hello

  My PC is out after receiving a message saying that my system fan was about to leave.

  Which fan is, so I can order and is it hard to replace these fans? If I try to do, I want to make sure I order fan.

  HP Pavilion #a6700y model

  series #[number of Series edited by Moderator]

  Thank you

  Cheryl

  As I said, the fan should be a 92mm fan and the standard thickness is 25 mm. The rear case fan is a 3 son, not 4. See the diagram of the motherboard that I linked.  The fan speed must be within tolerances. Low fan speed will cause an error of automatic system.  Minimum speed must be 900 RPM.

• 90 b system fan does not

  System fan does not, please stop, press ENTER to continue... 90 (B)

  Laptop Presario CQ57

  Windows 7 Home premium, 64-bit OS.

  Product number B1Q23EA #ABF, still under warranty, purchased and resident in France.

  If I need to send for repair, please provide French tosend address him, thank you.

  Thank you, but I do not read or speak French well. I decided to open it and look for the dust bunnies.

  I found a tiny and removed dust Bunny, and the problem is now resolved. 4 months to break a fan, not impressed.

  My last laptop was a rabbit from the dust of the size of a gerbil before he started to complain... I don't know what my next laptop purchase will be, and what makes it not. Thanks for the reply.

• How to get CPU - Z to work if the system with the 0x0000007B error has no operating system

  The laptop that get the 0x0000007B error when trying to install xp as not the operating system on it because the drive has sata hard had to be replaced. Is there a way I can we still CPU - Z on this system.

  leewashington wrote:

  The laptop that get the 0x0000007B error when trying to install xp as not the operating system on it because the drive has sata hard had to be replaced. Is there a way I can we still CPU - Z on this system.

  If you install Windows XP or a later operating system, you will be able to use the CPU - Z. CPU - z cannot be used if there is no system of operatng on a laptop, because it is not a stand-alone utility.

• Compaq Presario SR1719UK, System fan fail warning

  Hi guys

  Hope you can help me with what I am puzzled.

  I have a compaq presario SR1719UK that I transplanted everything except a car fan and DVD in a new case.

  I added a new case for the new case fan and everything is properly connected, and yet on startup, I get the attention system fan failure, he has not done this in the case of the former.

  In the bios, that the temperature fits as 35 degrees with the CPU fan at about 1500 rpm, case fan display 0 RPM, even if she is running and blowing air out of the case.

  Overall, I am confused!

  Any help would be greatly appreciated

  Data sheet:

  Athlon 64 (V) 3400 + 2.2 GHz

  ATI Radeon Xpress 200

  Card mother MS-7184

  HP/Compaq motherboard name: AmethystM-GL6E

  2 GB DDR memory

  Windows 7 Ultimate (can be reversed for Linux but can downgrade to XP)

  Flex 300W power supply

  Hello sparticate, you may have installed a fan that is not compatible with the HP motherboard. Is it possible that you can replace the new fan with the original fan and see if the problem is resolved. These HP case and CPU fans have a speed sensor which tells the motherboard fan is indeed running. If the new fan has no such speed sensor drive, motherboard want to get the appropriate signal and display the error message.