System freezing or blocking

Similar Questions

• ABC causes system freeze

  I would be very grateful if someone could please tell me how to troubleshoot the cause of a system freeze.

  After that a BSOD caused by the premature elimination of a DVD of my d: drive, a program that I use frequently, ABC, was originally a complete system to freeze any moment, I try to run... it is Exact Audio Copy, a program that allows you to burn a cd, content analysis of files for loss/lossless music.  The only way to address the gel is through reboot cold.

  Here are the steps that I took so far... and maybe this will give you an idea:

  1. I uninstalled, but when I tried to re-install it ALSO caused a freezing of the system.

  2. in Safe Mode, I was able to reinstall them and run the program without problem.

  3. after the installation in Mode safe, but chasing after systematic startup, the system froze.

  So, I assume that there is a driver conflict...

  EventViewer does not seem to grasp the issue... nothing showed up.

  Are there other ways to understand the question?

  I am running XP Pro SP3, all the installed updates, on a Dell Vostro 220 s computers.

  Thanks a lot if someone can help me with this.

  Pter

  Just note if EAC still causes crashes while all other programs/processes are not running. If this is the case, then it has a bug or there may be a problem with one of your drivers. If there is no blocking, systematically add pack programs/process until there is a blockage. Essentially, you need to use the process of elimination until you isoliez the villain.

  Start by adding half back and then see if there is a blockage or not. You'll understand!

• After the memory upgrade in Satellite A100-1401E the system freezes

  The laptop was initially delivered with only 512 MB of RAM.

  I installed 1 GB of RAM Kingston (part No. KTT533D2 / 1 g) into the remaining free memory slot. However, whenever I turn on the computer, the system freezes within minutes and I have to re - start.

  Is it because there is an uneven amount of memory in the 2 slots? I have 512 MB in each slot or 1 GB in each slot, etc.?

  I would like your advice.

  Have you tried to change places and put 1 GB of RAM in slot A?

• Satellite A210-1UP - every few minutes the system freezes

  Hello

  I just installed windows 7 32 bit on a satellite A210-1UP

  Every few minutes the system freezes and then continues as if nothing had happened.
  No error or blue screens are displayed

  I would like to know if windows 7 can work without problems on this system?
  That is the version of the bios recommended to run windows 7?

  Thanks in advance!

  Kind regards
  Stijn

  Hello

  Yes, you can run Windows 7 on the A210.
  I ve got an A210 and installed Win 7 32 bit.
  It runs correctly without big problems.
  I have collected the drivers Windows 7 and install it on the system.

  Some missing Toshiba Software, that I could find in other series of satellites; for example, L500.
  Here I chose ve the VAP and Support utility Flash memory card in order to get the FN and the multimedia to work keys.

  PS: I no has not updated the BIOS as it was not necessary; everything is ok.

• Portege M800-106 the system freezes when I connect a device via USB

  When I connect a device through a USB port, the system hangs. This happened with any device even something that has been used before. Example - if I turn on the printer /plug in my Blackberry to synchronize the .laptop just going so slow that I have to do a reboot with the devices still connected to get the system working again. Running Vista. Any help please?

  Hello

  You see yellow exclamation marks in Device Manager? Maybe a driver isn't installed properly in the system freezes.
  In addition, I would try to remove the USB ports in Device Manager. After this restart your laptop and USB ports will be recognized again.

  Have you tried a BIOS update? If this isn't the case, you should do it. Before you begin the update, close all running programs and make sure that you are logged on as administrator.

  Last but not least try to reinstall Windows using the Toshiba recovery disc. It only takes a few minutes and then you have settings to factory again! :)

• a pop up keeps saying your system administrator has blocked you from running this program, do not know what the problem

  ORIGINAL TITLE: Please help!

  a pop up keeps saying your system administrator has blocked you from running this program, do not know what the problem is please help

  Right-click on the program in question and click Run as administrator,

  When you are prompted, enter the administrator password.

  If you don't know what type of account you have.

  Click on the Start button in the taskbar and click on photo of your user name at the top.

  

  

• Startup Repair has worked 9 hours from WAU to go home 7-7 pro running. System is not blocked because I have control of the mouse and HD shows activity. What is the problem?

  Startup Repair has worked 9 hours from WAU to go home 7-7 pro running. System is not blocked because I have control of the mouse and HD shows activity. What is the problem?

  I would be out of system repair and safe boot mode:

  Start your PC, just before the system loads the Windows operating system; Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

• I've recently updated to CC 2015.2.1 but is still worse than Programstart 2.0 is normal, but after the forst in a few clicks it freezes and blocks. And what Adobe application support is worthless! They expect their customers to search, study and solve the

  I've recently updated to CC 2015.2.1 but is still worse than Programstart 2.0 is normal, but after the forst in a few clicks it freezes and blocks. And what Adobe application support is worthless! They expect their customers to search, study and solve their problems themselves instead of giving true and good customer. The availability of their telephone support is a bad joke and there is no telephone assistance service, that I could write my problem... Is this the way to treat customers who actually pay a lot of money for the product?

  I suggest you to please back in Lightroom 2015.1.1 and please wait for a new update which should fix most of the issues.
  Rear roller Article: Instructions to restore an earlier version of update

• D530 sff - freezes jacquard blocked screen - ideas?

  Hello

  My d530 sff freezes sometimes strange blocked screen - like psychedelic colored chessboard square on a blue background with a pattern. The squares shimmer a bit (which implies some treatment?), but it's totally unrersponsive.  The fault appears randomly and does not seem related to how long the machine has been run, nor his current mission (AFAIK). I can't cause the fault.

  It works under xp pro. I reinstalled xp on a different HARD drive and get the same, making me think it is not software/driver.  I've updated the BIOS, run memtest 86 + and premium 95 for hours and tests of material Inquisator and Ultimate Boot CD. They are all very well, making me think of the basic material is OK.  I considered the embedded video, but I can play movies on a network that is pretty intense...  With the lid, nothing in the area becomes too hot to the touch, although some chips and the plugs should be near 60 degrees celcius.  Radiator CPU fine to the touch.

  It would be easy to give up and say it's a weird mother board failure, but before I do any ideas?  The software matches the machine has more value than the box so I would rather not throw.

  Thanks for your ideas, Mike

  I extracted the zip file to install the Intel 14.16 package and installed manually from the Device Manager. Package Intel 14.17 absolutely did not work on every box of d530. This is the root of the problem which I faced instability.

  You can identify the controller by checking the properties of devices in the Devices.Look system for x or exclamation next to the drivers points, or if you see instances of "unknown device".

  SisoftSandra Lite will also identify the devices installed in the hardware section.

  As far as bad capacitors going that visually close should be enough. Search for leakages, bulging, distortion, a brown substance on or near the caps.

  So... in your systray, you see an icon of Intel graphics? That's what you should see if the graphic driver went well.

• Updated Firefox updated to its latest version 12.0. Now my plugin Adobe Flash freezes and blocks all websites when it is turned on even if it's the latest version.

  Today updated Firefox updated to its latest version 12.0. Immediately after the update, I couldn't load most of the sites. The web browser would just freeze. I have determined that the culprit is the Adobe Flash Plugin, however; even with the latest version of the plugin, I always have problems. Any suggestions?

  If anyone else has this problem I found a few options that may help you.

  I solved my problem by loading Waterfox, which is the 64-bit version of Firefox. I use a Windows 64-bit operating system, so this solution worked perfectly. If you want to download it, it can be downloaded here: http://waterfoxproject.org/

  It has also been suggested that I try to create a new Firefox profile. Since Waterfox works for me, I have not tried yet; However, I was told that it allows to solve several mysterious questions of Firefox with Flash. The directions for this can be found here: https://support.mozilla.org/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile

  I hope everyone can solve their problems of Flash Player and I recommend using the Adobe Forums as well. People there are very helpful.

  Good luck!

• When using OS 10.11.4 after using Safari for a few minutes, the system freezes, the only way to UN - freeze is to close the system with the power switch on my Mac Pro early 2008. Any ideas?

  When you use Safari on my system Mac Pro 8 core early 2008 if will freeze with no other way to free it up it's close with the power button.  Any ideas?

  Once you can restart go immediately to disk utilities and run repair disk permissions.

  When is check your Safari to make sure you have the version appropriate for your machine.

• P30 system freeze by WLAN

  Hello

  I own a Toshiba Satellite P30 Bios version 1.30, XP SP (bought about 9 month ago).
  Since a few weeks I encounter the same problem as the other users have reported in this forum (f.i. Lazlo, March 2005):
  -The system blocks randomly, fans running at high power, only by pressing the button allows you to.
  -After this restart, diagnosis (before Windows starts) display the following message: resource conflict - PCI network in the Groove 3 controller. Bus: 02; Feature: 02; Function: 00.
  No hardware changes have been made to the system.
  Not disabling the Atheros 5004 G network work adapter (System Manager), some gel, but I need WIFI to my network/internet connection!

  Because I've seen other users with the same problem, could you if you please help me with your experience and, hopefully, with the solution to this.

  Kind regards
  Roman

  Hello

  Have you installed the latest WLan driver?
  Please see the Toshiba page for latest driver version.
  In addition, if this procedure doesn't solve this problem, I would recommend, to recover the operating system with the recovery CD.

  Best regards

• System freezes and issues of the 7335 40L model

  Hello

  10 months ago I have the model L 40, 7335 there are 3 firmware updates, but the system continues to be frozen (can not change channel, HDMI ARC unknown blocked menus) several times a week.
  To unblock the situation, I have to unplug the power cord, then the TV system raise and work properly.

  I tried to disable the features that I do not serve me without success.

  You do not see any improvement as a result of updates to firmware, I'd like to know if there are concrete solutions, or if the guarantee can be used to request a repair or replacement?

  You can at any time you want to contact the nearest service Toshiba or your local dealer and ask for help.
  By the way: have you tried to set your TV to the factory settings?

• System freezes on my Qosmio F10

  Hello

  I am the proud owner of a Qosmio F10 - 2 years now. I had a few problems and cell phone is repaired but I have a problem again...

  When I play a computer game with a little higher than Solitaire system requirements, he works at all first for an hour and a half - that the image freezes, my USB mouse get not more power and my only choice is to close Notepad. When I try to play it takes ten minutes maybe - and then the same thing happens again.

  The third or fourth time that happened my BIOS is returned to the default values. But alone, without my order to make. But nothing has changed...
  I guess he gets to hot or something like that, but I only guess and I know before it has repaired the third time that this problem exists. Someone had a similar problem and know what to do? (Instead of going to the store where I bought it).

  Greetz of Germany with to excuse for my not so perfect English.

  M.W.

  Hello

  I have an update:

  Last night, while I was waiting for an answer here, I challanged my chance and I have not lost.

  I installed a tool called "Notebook Hardware Control" which can view log und properties of your laptop. No doubt more I would say that my CPU become too hot while playing - after a short time (a few minutes) the core reached a temperature of 80 ° and more and it's DEFINTLY too.

  What to do now? I tried to reduce the Voltage of the CPU, it works and my system has remained stable, but it reached 80 ° also... So I opened the laptop. Without any abnormality (important), I closed and went from disappointment and without any solution to the bed.

  Today, I'll try to play the same game again to see if the system has always crush or not AND I'll watch it.

• Lenovo G510 Linux - system freeze downloading complete

  My Lenovo G510, with Qualcomm Atheros AR8172/8176/8178 Fast Ethernet Controller, almost constantly completely freezes when downloading via ethernet on Linux. In Windows 7, it works perfectly, so it's not a hardware problem. I tried various Linux distributions, 32 and 64-bit (Ubuntu 14.10, 14.04, Linux Mint Debian Edition, Fedora 20 etc.) -all behave in the same way. It always happens when you download large files (like a linux iso file) and sometimes even during the download of the smallest (such as trying to install applications of deposits online, or even try to update the repository of the respective linux distribution database). When freezing occurs, the system becomes completely insensitive, I can't yet move to another virtual terminal.

  I would try a bios update, but there is a newer version of the bios for my model on the lenovo site, it says that it's only for Windows 8 and 8.1 - which I do not, and I fear that it could interfere with the functionality of my Windows 7 operating system.

  How to solve this problem so that I am able to use linux, do you have advice?

  Update the bios to Version 79CN50WW (V3.09) solved the problem. Now it works perfectly.

  http://download.Lenovo.com/Consumer/mobiles/viwgq309.exe

  I don't know about you, but the update to the bios may need to be executed under Windows 8 or 8.1. I ran under 8.1.