System Integrator

Similar Questions

• CTS TMS systems integration

  Hello

  What version of CUCM can you perform the integration to manage systems CTS in tms?

  I find no information about it in the documentation.

  Kind regards

  Stijn

  Hello

  What follows is version of Cisco TMS 13.1 notes sw:

  New in Cisco TMS 13.1 is the support of endpoints of CTS. The support is centered around planning and requires the Cisco Unified Communications Manager (Cisco Unified CM) version 8.0 and newer to add to the TMS of Cisco.

  Rgds,

  Dale

• I lost my CD of Windows XP OEM for system integrator, but still have the cd - key

  Hello

  My system is corrupt and I need to reinstall Windows XP Professional on my computer.

  I have lost my Windows XP Professional OEM cd, if I still have the cd - key.

  Anyway, or no matter what number I can contact to get a new cd or other alternatives?

  Thank you very much

  New CD no longer exists.

  Since you still have the valid key, you need to somehow know is how to get one of these CDs. If you're lucky, you know someone who has one. It will work with your key. But it must be authentic, of course!
  If a friend of yours and if they give you an image .iso of it, then you must verify that these are the hash values:
  MD5: 9BB3CB003E2C6005FCCC28C305BE05FF
  SHA1: DDA4AC450B2174CAC6C15295711330160C237418
  Otherwise, you will probably wind upward with a version riddled with malware (creeping on the Internet of course) and you should certainly avoid at all costs the versions of malware in prey.

• Can I buy an OEM Version of Windows 7 system integrator?

  CAN I BUY A WINDOWS OEM SYSTEM BUILDER VERSION 7?

  You can buy a version retail or OEM of Windows 7 to selling software online many Web sites.

  Here are a couple.

  Newegg.com - Microsoft Windows 7 - retail trade and OEM System Builder

  Amazon.com - Microsoft OEM System Builder software

  NOTE: you should be aware of the following disclaimer before you decide to buy an OEM System Builder version.

  Use of this OEM System Builder channel software is subject to the terms of the Microsoft OEM System Builder License. This software is for pre-installation on a new personal computer for resale. This OEM System Builder channel software requires the assembler provide support to the end user for the Windows software and cannot be transferred to another computer after installation. To acquire a software Windows with support from Microsoft, please see our full package offers of products 'Retail '.

  Here is a link where you can download the most recent system builders license agreement in any localized language.

  Microsoft OEM Partner Center - system manufacturer license agreement

  This information is provided so that you can make an informed decision before you buy.

  Thank you for using Windows 7 Ronnie Vernon MVP

  There is no technical restriction that prevents you from using it, but it is not intended for consumers.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  OEM licenses must be installed by professional system manufacturers. Under Microsoft's OEM license agreement, they should not be sold to end-users under any circumstances, must be preinstalled on a computer using the preinstallation OEM (OPK) before delivery to the customer and include to the at least the manufacturer contact information. They are, therefore, designed for installation only on a single computer and are not transferable, even if the original computer is no longer in use. This isn't usually a problem for users who buy a new computer, because systems that most pre-assembled systems ship with a preinstalled operating system. There are very few circumstances where Microsoft will allow the transfer of licensed OEM for a non-functional system to another, but the OEM System Builder License Agreement (SBLA), as well as the EULA (EULA) OEM contract don't contain any provision for this, it is entirely at the discretion of Microsoft, depending on the situation

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_for_hobbyists.aspx

  There are two types of OEM suppliers. Royalty OEM vendors can distribute Windows products by using the preinstallation (SLP) product keys so that end users can bypass product activations. All other OEM vendors distribute Windows products by using the standard product keys that require the user to activate Windows products.

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB
  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• UCCX 8.5 CAD mixt CSQ - BMC Remedy AR System Integration

  Full UCCX newb here.

  Analyst contact centre for a service of assistance-support for the internal operations of the 90 seats.

  UCCX 8.5 Premium with the Communication Manager

  I am a contact center analyst in the conversion process our assistance service of an Avaya ACD to 8.5 UCCX Cisco as part of a company-wide VOIP conversion. We are about two weeks of commissioning with UCCX reproducing our current capabilities of Avaya and functionality. At this point, I started trying to find ways to improve operational efficiency and productivity with UCCX in the form of post-conversion changes and introduction of features.

  We use the module BMC Remedy Action Request System 7.6 incident as our ticketing system.

  My question for the experts, with 8.5 UCCX and CAD is possible to create a CSQ non-telephone in queue Incidents our cure to our agents? The aim is to offer tickets in queue to our agents and ultimately be able to track and report on efficiency measures combined. My thought is that this feature should be similar to the functionality of email agent, we cannot benefit from the reason of incompatibility UCCX with our Lotus Domino messaging platform.

  Hello

  If you are interested in the the ITC UCCX API, it's your primary source of information: http://developer.cisco.com/web/uccxcti/home

  G.

• Error with duplicate DTD SYSTEM integration

  I work with one of the latest releases
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  "CORE 11.2.0.1.0 Production."
  AMT for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  I try to insert xml into an XMLType table and confirm it with a DTD. To achieve this, I created a folder/xmlmine/dtd and applied this acl
  

  <acl description="dilbertacl" xmlns="http://xmlns.oracle.com/xdb/acl.xsd" xmlns:dav="DAV:" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/xdb/acl.xsd                                    http://xmlns.oracle.com/xdb/acl.xsd" shared="true">
        <ace>
          <grant>true</grant>
          <principal>DILBERT</principal>
          <privilege>
            <dav:all/>
          </privilege>
        </ace>
      </acl>

  I then transferred this dtd to play.dtd with
  

  DECLARE
    b BOOLEAN;
  BEGIN
    b := DBMS_XDB.createResource('/xmlmine/dtd/play.dtd',bfilename('dtds', 'play.dtd'));
  END;

  and I can see with
  

  select xdburitype('/xmlmine/dtd/play.dtd').getCLOB() from dual;
  
  <!-- DTD for Shakespeare    J. Bosak    1994.03.01, 1997.01.02 -->
  <!-- Revised for case sensitivity 1997.09.10 -->
  <!-- Revised for XML 1.0 conformity 1998.01.27 (thanks to Eve Maler) -->
  
  <!ENTITY amp "&#38;">
  <!ELEMENT PLAY     (TITLE, FM, PERSONAE, SCNDESCR, PLAYSUBT, INDUCT?, PROLOGUE?, ACT+, EPILOGUE?)>
  <!ELEMENT TITLE    (#PCDATA)>
  <!ELEMENT FM       (P+)>
  <!ELEMENT P        (#PCDATA)>
  <!ELEMENT PERSONAE (TITLE, (PERSONA | PGROUP)+)>
  <!ELEMENT PGROUP   (PERSONA+, GRPDESCR)>
  <!ELEMENT PERSONA  (#PCDATA)>
  <!ELEMENT GRPDESCR (#PCDATA)>
  <!ELEMENT SCNDESCR (#PCDATA)>
  <!ELEMENT PLAYSUBT (#PCDATA)>
  <!ELEMENT INDUCT   (TITLE, SUBTITLE*, (SCENE+|(SPEECH|STAGEDIR|SUBHEAD)+))>
  <!ELEMENT ACT      (TITLE, SUBTITLE*, PROLOGUE?, SCENE+, EPILOGUE?)>
  <!ELEMENT SCENE    (TITLE, SUBTITLE*, (SPEECH | STAGEDIR | SUBHEAD)+)>
  <!ELEMENT PROLOGUE (TITLE, SUBTITLE*, (STAGEDIR | SPEECH)+)>
  <!ELEMENT EPILOGUE (TITLE, SUBTITLE*, (STAGEDIR | SPEECH)+)>
  <!ELEMENT SPEECH   (SPEAKER+, (LINE | STAGEDIR | SUBHEAD)+)>
  <!ELEMENT SPEAKER  (#PCDATA)>
  <!ELEMENT LINE     (#PCDATA | STAGEDIR)*>
  <!ELEMENT STAGEDIR (#PCDATA)>
  <!ELEMENT SUBTITLE (#PCDATA)>
  <!ELEMENT SUBHEAD  (#PCDATA)>

  When I proceed to insert with

  INSERT INTO sestable VALUES (XMLType(bfilename('xmls', 'all_well.xml'),nls_charset_id('AL32UTF8')));

  the top of the xml document looks like

  <?xml version="1.0" encoding="WINDOWS-1252"?>
  <!DOCTYPE PLAY SYSTEM "/xmlmine/dtd/play.dtd" [
  <!ELEMENT PLAY (TITLE, FM, PERSONAE, SCNDESCR, PLAYSUBT, INDUCT?, PROLOGUE?, ACT+, EPILOGUE?)>
  <!ELEMENT TITLE (#PCDATA)>
  <!ELEMENT FM (P+)>
  
  ........
  
  <!ELEMENT SUBTITLE (#PCDATA)>
  <!ELEMENT SUBHEAD (#PCDATA)>
  ]>
  <!-- DTD for Shakespeare    J. Bosak    1994.03.01, 1997.01.02 -->
  <!-- Revised for case sensitivity 1997.09.10 -->
  <!-- Revised for XML 1.0 conformity 1998.01.27 (thanks to Eve Maler) -->
  <PLAY>
    <TITLE>All&apos;s Well That Ends Well</TITLE>
    <FM>
      <P>Text placed in the public domain by Moby Lexical Tools, 1992.</P>
  
  ....
  
        <STAGEDIR>Exeunt</STAGEDIR>
      </EPILOGUE>
    </ACT>
  </PLAY>

  but when I try to query the table with something like

  select xtab.COLUMN_VALUE
  from sestable, XMLTable('let $i := /PLAY/ACT/SCENE/SPEECH[SPEAKER eq "DUKE"]/LINE
                  return count($i)' PASSING OBJECT_VALUE) xtab;

  I get an error
  LPX - 00107:Warning: 'PLAY' element has several statement
  
  If I remove the keyword SYSTEM and simply inline DTD, everything works fine.
  
  I suspect that the parser is Inline DTD but does not remove the directive of the SYSTEM, including therefore the DTD twice, where the error. Any suggestion on how to solve this problem?
  
  Thanks in advance

  What should I do now, because binary XML doesn't validate? Is there another way to validate XML with a DTD document in addition to directly copy and paste the file DTD?

  Well, as a workaround, you can disable the DTDS validation once the document has been inserted in the table.

  SQL> select storage_type from user_xml_tables where table_name = 'PLAYS2';
  
  STORAGE_TYPE
  -----------------
  CLOB
  
  SQL> SELECT count(*)
    2  FROM plays2 p
    3     , XMLTable( '/PLAY/ACT/SCENE/SPEECH[SPEAKER eq "DUKE"]/LINE'
    4                 passing p.object_value ) x
    5  WHERE XMLExists( '/PLAY[TITLE=$title]'
    6                   passing p.object_value
    7                        , 'All''s Well That Ends Well' as "title" )
    8  ;
  SELECT count(*)
  *
  ERROR at line 1:
  ORA-31011: XML parsing failed
  ORA-19202: Error occurred in XML processing
  LPX-00107: Warning: element "PLAY" has multiple declarations
  Error at line 24
  Error at line 7
  
  SQL> alter session set events '31156 trace name context forever, level 2';
  
  Session altered.
  
  SQL> SELECT count(*)
    2  FROM plays2 p
    3     , XMLTable( '/PLAY/ACT/SCENE/SPEECH[SPEAKER eq "DUKE"]/LINE'
    4                 passing p.object_value ) x
    5  WHERE XMLExists( '/PLAY[TITLE=$title]'
    6                   passing p.object_value
    7                        , 'All''s Well That Ends Well' as "title" )
    8  ;
  
    COUNT(*)
  ----------
          19
  

  If this is a bug report, or you can do / have already done this?

  I don't see anything in the documentation about binary XML and DTD validation, so yes I think you should report it to the Support of Oracle.

• How can I add a booking online system integrated into a Web of Muse site?

  I create a site with Muse for a guesthouse. How can I add a booking form that allows people to choose dates and rooms available and make a reservation with a card? Are there templates for those forms that plug into sites of Muse? and tutorials on how to build them. Can I do this with business catalyst?

  If you have the creative cloud subscription.  It allows you to buy and launch five free sites (on BusinessCatalyst), which are web solutions of basic in nature and did not include the blog feature. To use the Blog feature in BusinessCatalyst, you will need to upgrade the site to siteplan superior. So, you can choose between the Business catalyst, Wordpress, Tumblr, Google Blog, etc.

  When you upgrade a business catalyst website, you get a few extra features with blog. So according to your requirement, you can go for the plan. Already, you have a price for the site plan of the BC, a detailed breakdown of what is included in each hosting plan, check out this article.

  Ventilation of the detailed plan

  Also, I found a link that shows how to integrate wordpress blog on your website Pro behance, in case you need.

  https://help.Behance.NET/entries/23181846-ProSite-can-I-integrate-my-blog-into-ProSite-

  Let me know if you have any question.

• The integration of the system prompt always to start Thunderbird, even if 'Always show at startup' is disabled

  Whenever I run Thunderbird, I get the "System Integration" notification area even if the option "Always perform this check at startup of Thunderbird" is NOT checked. Please, let me also be clear, I DON'T want integration system. Therefore, I unchecked all boxes that are not grayed out and selected 'Skip Integration', since there is not a box for "don't fit". Can someone tell me please how to stop this aggravating box continue to appear, without integrating Thunderbird or use a different e-mail client.

  I am running: operating system: Windows 10 Thunderbird homepage: 45.5.0

  You have another installed e-mail client/program? If this isn't the case, then why not let Thunderbird to be your default e-mail client/program? 'Systems integration' means that he will say that any attempt in Windows to send an e-mail to trigger Thunderbird Windows.

  If you do want another program to be the default e-mail program, then try this.

  First of all, make sure that the other e-mail program is configured to be the default e-mail program in Windows:

  Open Windows Action Center (click the icon in the lower right corner of your screen, which is to the right of the digital clock). Click on "System", then "Default apps" on the right side. Under "Choose default apps" on the side right, click the e-mail program and change it to your preferred e-mail program.

  Now in Thunderbird: Thunderbird menu: Options: Advanced: general tab: click "check now".

  Uncheck the box E-mail and Newsgroups (or that you can and want to deselect), and then click "Set as default", which means only 'OK' or 'Apply' in this environment. (See image).

  Then it must not appear again.

  This solution was causing this issue .

• When I run Thunderbird, I now have a window of integration of systems that value as the default buttons and the integration of Skip. How can I stop getting this window?

  The system integration area just started appearing when I start Thunderbird. I unchecked the box for always perform this check at startup of Thunderbird. I uninstalled Thunderbird and reinstalled. The checkbox in the Options > general to check for the default email client is also disabled. I don't have any other mail client installed. Anyone know how to stop it? Thank you.

  He is a current bug whose solution is described in the two posts from here:

  https://support.Mozilla.org/en-us/questions/1148107#answer-941265

• Integration of systems

  Hello
  I'm developing an application that needs to be integrated with other systems, where the logic is as follows:
  Application-> integration-> external system system
  
  I would like to know the best way to develop an API in pl / sql, from my application in oracle, require system integration. But wouldn't that my system is dependent on this system of integration, that is, when you install my application does not have to install the system integration.
  What is the best method to develop the API?
  EXECUTE IMMEDIATE usage?
  Can you help me? If possible with some examples?
  
  Nilton Nascimento
  
  Edited by: user7044798 01-Sep-2008 03:41

  duplicate thread [url http://forums.oracle.com/forums/profile.jspa?userID=654533]

• Discreet Integrator (control and Simulation Module) - LabVIEW 2015

  Hey everybody,

  I'm trying to drag the discreet Integrator on a block in 2015 of LabVIEW diagram. All other vi in the "range of discrete linear systems are draggable, but not the"discreet"Integrator." I noticed the same thing for the continuous Linear Systems Integrator. Anyone explain how to solve this problem?

  Sincerely,

  Lex

  Lexicondi,

  Unfortunately, these functions cannot be moved out of the loop control & Simulation. We support only discrete transfer, of State spaces and ZPK models function.

  So, if you want the "discreet Integrator" outside of the SIM card, you have the following options:

  one) to use the "discreet transfer function" as T /(z-1) (or any other type of discretization available in discreet Design continuous monitoring);

  (b) you can develop your functions inside the control and the Simulation loop and then create a subsystem of her. The subsystem can move outside the SIM card also. Here, you can use any SIM function you want;

  I hope that this should be sufficient for your application.

• Laptop HP 431 - deleted this partition containing the built-in operating system windows 7

  Dear Sir.

  Manufacturer had given integrated windows 7 operating system that start by pressing F11 at startup.

  At the time of the installation of external operating system through DVD, I unfortunately, by mistake I have deleted all the partition, I think, I deleted this partition containing BONES embedded in the hard drive.

  Now, I'm ready to install the operating system integrated by pressing F11, but it works not.

  Please give me a directive, how can I install integrated windows 7 operating system just like previous from by pressing F11 at startup.

  Kind regards

  Yogesh Sonar

  Y at - it a Windows Certicicate for authenticity on the bottom of your laptop or in the battery compartment that has the license of operating system twenty-five characters?

  Is there, then you can download an ISO install image and create an installer DVD or usb that will let you use this license key.

• How to prioritize the connection of the PHONE in CAR Bluetooth system / device on SmartBand talk SWR30

  After reviewing on this device for over a month I asked my wife to gift me for Christmas. For 3 days I really liked, but then a critical flaw is apparent

  Having not driven for several days because of the holidays, I'm leaving in my car, only to realize that I wasn't getting phone calls, text Messages and other notifications on my car bluetooth system integrated (Ford Sync of Sony / Microsoft), only on the talk Smartband. Doing some research, it became clear that if my SWR30 was already connected with my Xperia (Z2) my Ford Sync could not connect!

  I realize the limitations of Bluetooth technology (for example, you can not simultaneous connections using the same Bluetooth profile) and the workaround is to manually turn off the Audio from the phone (hands-free) for SWR30 in Z2 Bluetooth profile. Don't forget to turn off off / return turns out to be irritating and too much effort. I thought I might be able to create a (macro) event in app of Smart Connect from Sony to do this automatically, but this can be done that the app is rather limited!

  It is more important for my car system works with my Z2 that I use frequently and is quite a safer and more average legal to answering calls etc.

  A no matter what you have no idea or suggestion? I love this SmartBand (its a lot smoother and lighter than the real smartwatches) and I really want the talk function, but if I can't solve the problem of car bluetooth (and this will affect probably all other car systems Bluetooth / devices) easily and smoothly, with regret, the SWR30 will go back to the seller

  As already said, I really like the SmartBand and was very disappointed to learn that he could not coexist with a Bluetooth car system! Having had a few days between Christmas and new year I was determined to solve this "loophole" and I'm happy to announce that I have and somehow smooth!

  Suggestion widget-driven "ensaro", unfortunately, I didn't a rocker who was to be executed manually, it should be automatic. So I carefully studied the Google game shop, try a large number and ended up with 2 applications that were real contenders: Trigger (by Egomotion) and Automagic (by Gridvision).

  Both apps will basically allow you to create a trigger (for example the Bluetooth car radio wants to connect to the phone) followed by an action (for example disconnect connection phone Bluetooth to SmartBand, followed by switch on Bluetooth car audio connection). Trigger calls this task automation a trigger, Automagic calls that a Flow.Trigger is fairly intuitive, visually, but unfortunately support for this supposedly highly rated app seems to no longer exist! It became very frustrating for me because sometimes it would not run (However, it allows also a widget manually run the task manually)... so I dug for the heavier weight Automagic!

  AUTOMAGIC uses a dynamic flowchart, where you add a trigger, optional condition (true / false) and finally one or more actions. The style reminded me of my days of programming many years ago and logical nature excited me. The possibilities are huge and can scare some users looking for a quick result, but it's really very easy to use, especially when you have some of the somewhat "obscure" terms used (after all this, a German programmer of labour and some suggestions of translation may be required).

  At the end of the day, I created 2 stream, connect to car via (SmartBand disconnect) system and then connection towards my car and the other to reconnect to the SmartBand not drive (the trigger being the car Bluetooth is is disconnected / unplugged). These flows is passive and apparently uses very little battery energy, execution when a trigger condition is matched, and so far, works well.

  If someone wants to see how my stream are built, I'll be happy to email them. You open them directly in Automagic (go to their website allows you to download a 9 day trial version with up to 3 workflow)... my stream are embellished by additional measures, like turn off WiFi and play a sound when a connection took place... and most important of all there is a forum with a lot of help and examples and I was really happy when the progaming author , Martin, in fact, responded to a query...

  Problem sorted...! AUTOMAGIC worth £ 2.40 ...

• Help! My screen is blue with a system details fatar error below message...

  My screen is blue and it is the message I get

  "STOP: c000021a {fatal system error} the initial NT command process ended unexpectedly with status 0 xC0000001 system (0x00000000 0x00000000) the system has been shut down."

  I can't even log in to my desktop. I don't know much about computers but I know enough that I can follow the instructions on what to do.

  Help? Thank you!

  Jessica

  The error itself isn't really that useful.

  # to 0 xC0000001 hex / decimal-1073741823:
  hrNyi                                                         ntdsbmsg.h
  # The function is not yet implemented
  STATUS_UNSUCCESSFUL ntstatus.h
  # {Failed}
  # The requested operation failed.
  USBD_STATUS_CRC usb.h
  # 3 results found for "c0000001.

  You can try to run an offline system integrity check,

  http://mikemstech.blogspot.com/2011/12/how-to-perform-offline-system-integrity.html

• new windows download system

  so long story short: I'm building my own computers, and as such, I legally buy the OEM version of windows through different providers. Recently my computer crashed, and I can't find my installation disk. no problem right? go to digitalriver and I'm good to go. Well, since microsoft has removed with digital river and now only allow downloading from their site, I discovered that OEM product keys can be used to download an ISO. I called technical support, tried to communicate my problem to the technology, but all she said was "Contact the manufacturer of your computer" and could not understand that I am the manufacturer. Is there something she was absent or Microsoft seriously done this to those who build their own computers?

  Windows 7 is released in 2009

  OS X Snow Leopard is released in 2009

  It's almost 6 years. If you need get a recovery for a version of Windows 7 OEM media, you would normally contact the manufacturer, in this case, it would be you.

  Replacement of media study
  If you are a system integrator and want to request replacement media listed above, click on and fill in the form of replacement of media below. Once you have provided the required information, including the details of the certificate of authenticity (COA), a bid confirmation message will be sent to you by e-mail.

  Please click here to access the media replacement form

  Source: http://www.microsoft.com/oem/en/salesmarketing/pages/media-replacement.aspx#fbid=TtvhAsvHsyD