CTS TMS systems integration

Similar Questions

• Adding the Polycom HDX to the TMS system

  How can I add a Polycom HDX system in TMS to manage?  What, if any configuration on the Polycom system must be made, or in the TMS?  Can't seem to find any documentation about it.

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/TMS/interoperability/Cisco_TMS_Product_Support.PDF

• Allow outgoing SIP URI dial on the TMS system Type: room

  Hello

  I ve added a VC-end point unsupported to the TMS with system Type: room.

  If I check the planning parameters on MSDS for this endpoint, I see that I can only plan entering, but not outgoing calls.

  We´re with the help of BBFRR and if I book this endpoint in a Multipoint meeting, I get an error of TMS routing, because the outgoing call missing clearances characteristic.

  Is there a way to activate the planning coming out for this type of endpoint?

  Is it possible to configure the device manually type for example in the MXP880 to get the outbound features?

  Is there maybe a flag in the comic book, were I can define the type of device manually?

  Thank you

  Tino

  System of 'room' type is intended for endpoints that TMS does not support, but which can be saved to the guardian or register SIP (and therefore be composed by any other endpoints). MSD cannot control endpoint, it cannot force the end point to dial a number to someone, but logical routing TMS allows incoming calls, because it assumes that the doorman / SIP registrar can route calls to it.

  Makes sense?

• Put into service devices (EX60, etc.) added as TMS systems

  Two questions based on this topic.

  1. I noticed when I configured my EX60 with our VCS that everything has worked out perfectly well.  However, I would like to add also the system in TMS as a system that gets watched, not managed as such by TMS.  I noticed that there is a checkbox in the settings called 'Set up', preventing MSDS to alter the configuration of the parameters on the codec and switching TMS to be VCS.  However, I have noticed once that I added it in TMS after it has been supplied by VCS, TMS has changed the settings of commissioning until I could check the put option in service in the page settings of TMS of the codec.  Y at - it a good way or numbered steps to add a codec in TMS that will eventually be put into service in VCS?

  2. How someone handles directories within TMS, if one has a source of directory-based endpoints in a folder where the aircraft put into service, and you have the directory based on the configuration directory.  How would he keep the system appear twice?  Right now the directory provsioning side two H.323/SIP as @domaine, while settings for H.323 and SIP is @domaine.  Are there two entries because it is listed in the telephone directory in two different places, or the H.323 entrance is different?

  So, basically, what is the preferred method of deployment when provisioing these devices with the VCS and wanting to be able of have registered them in TMS for all purposes the user would like.  Because obviously the two can be made, do not know the best way to go about it.

  Hi Patrick

  1: I tested the first scenario in two ways, adding the endpoint to the TMS and then provision it and purge, available and add it again.

  None of these facts, the box automatically ticked but adding the system first, gave the time check box so that the parameters of TMS is not applied. I guess it's the best way to do at the moment.

  2: as you know, when the system is put into operation it is associated with the user in the TMSPE directory, FindMe would be the answer here and then choose to not import the "peripheral" in the provisioning directory to keep only the URI FindMe. You want to configure the EX with a model of the device: [email protected] / * /

  The end point once added to TMS will appear in the "All systems" directory, which is an effect that you get when you add the system put in service to TMS. But the effect is neutralized by FindMe when you are not importing the user devices in the configuration directory.

  / Magnus

• I lost my CD of Windows XP OEM for system integrator, but still have the cd - key

  Hello

  My system is corrupt and I need to reinstall Windows XP Professional on my computer.

  I have lost my Windows XP Professional OEM cd, if I still have the cd - key.

  Anyway, or no matter what number I can contact to get a new cd or other alternatives?

  Thank you very much

  New CD no longer exists.

  Since you still have the valid key, you need to somehow know is how to get one of these CDs. If you're lucky, you know someone who has one. It will work with your key. But it must be authentic, of course!
  If a friend of yours and if they give you an image .iso of it, then you must verify that these are the hash values:
  MD5: 9BB3CB003E2C6005FCCC28C305BE05FF
  SHA1: DDA4AC450B2174CAC6C15295711330160C237418
  Otherwise, you will probably wind upward with a version riddled with malware (creeping on the Internet of course) and you should certainly avoid at all costs the versions of malware in prey.

• Can I buy an OEM Version of Windows 7 system integrator?

  CAN I BUY A WINDOWS OEM SYSTEM BUILDER VERSION 7?

  You can buy a version retail or OEM of Windows 7 to selling software online many Web sites.

  Here are a couple.

  Newegg.com - Microsoft Windows 7 - retail trade and OEM System Builder

  Amazon.com - Microsoft OEM System Builder software

  NOTE: you should be aware of the following disclaimer before you decide to buy an OEM System Builder version.

  Use of this OEM System Builder channel software is subject to the terms of the Microsoft OEM System Builder License. This software is for pre-installation on a new personal computer for resale. This OEM System Builder channel software requires the assembler provide support to the end user for the Windows software and cannot be transferred to another computer after installation. To acquire a software Windows with support from Microsoft, please see our full package offers of products 'Retail '.

  Here is a link where you can download the most recent system builders license agreement in any localized language.

  Microsoft OEM Partner Center - system manufacturer license agreement

  This information is provided so that you can make an informed decision before you buy.

  Thank you for using Windows 7 Ronnie Vernon MVP

  There is no technical restriction that prevents you from using it, but it is not intended for consumers.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  OEM licenses must be installed by professional system manufacturers. Under Microsoft's OEM license agreement, they should not be sold to end-users under any circumstances, must be preinstalled on a computer using the preinstallation OEM (OPK) before delivery to the customer and include to the at least the manufacturer contact information. They are, therefore, designed for installation only on a single computer and are not transferable, even if the original computer is no longer in use. This isn't usually a problem for users who buy a new computer, because systems that most pre-assembled systems ship with a preinstalled operating system. There are very few circumstances where Microsoft will allow the transfer of licensed OEM for a non-functional system to another, but the OEM System Builder License Agreement (SBLA), as well as the EULA (EULA) OEM contract don't contain any provision for this, it is entirely at the discretion of Microsoft, depending on the situation

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_for_hobbyists.aspx

  There are two types of OEM suppliers. Royalty OEM vendors can distribute Windows products by using the preinstallation (SLP) product keys so that end users can bypass product activations. All other OEM vendors distribute Windows products by using the standard product keys that require the user to activate Windows products.

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB
  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• UCCX 8.5 CAD mixt CSQ - BMC Remedy AR System Integration

  Full UCCX newb here.

  Analyst contact centre for a service of assistance-support for the internal operations of the 90 seats.

  UCCX 8.5 Premium with the Communication Manager

  I am a contact center analyst in the conversion process our assistance service of an Avaya ACD to 8.5 UCCX Cisco as part of a company-wide VOIP conversion. We are about two weeks of commissioning with UCCX reproducing our current capabilities of Avaya and functionality. At this point, I started trying to find ways to improve operational efficiency and productivity with UCCX in the form of post-conversion changes and introduction of features.

  We use the module BMC Remedy Action Request System 7.6 incident as our ticketing system.

  My question for the experts, with 8.5 UCCX and CAD is possible to create a CSQ non-telephone in queue Incidents our cure to our agents? The aim is to offer tickets in queue to our agents and ultimately be able to track and report on efficiency measures combined. My thought is that this feature should be similar to the functionality of email agent, we cannot benefit from the reason of incompatibility UCCX with our Lotus Domino messaging platform.

  Hello

  If you are interested in the the ITC UCCX API, it's your primary source of information: http://developer.cisco.com/web/uccxcti/home

  G.

• System Integrator

  I am the owner of a computer repair store and begins to make custom-made PC. My question is about the Windows 7 for edition of system builders. Which is the same as regular Windows 7 essentially, except I support?

  Basically, Yes, but there are some differences. And it's cheaper then "regular" Windows 7.

  Difference between a Full and selling retail and OEM/System Builder License.

  Windows OEM licenses:
  (1) are related to the first computer installed on and are non-transferable
  (2) can't make a room upgrade from older versions of Windows
  (3) offer no free support from Microsoft
  (4) allow hardware upgrades of all components except for the motherboard (unless, of course, because the card mother original becomes defective)

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• TMS & WebEx integration

  All,

  I'm trying to help out our MSDS/WebEx for the integration of telepresence and I'm stuck.

  When I go to "administrative tools > Configuration > WebEx Settings'"

  Then I add our site, which is enabled for the integration of telepresence, I get "Login failed."

  "Could not connect to the site. WebEx error code: SystemError. »

  I did the capture of packets, but don't see anything worthy with the exception of the SSL/TLS negotiation.  I can provide the capture if necessary.

  Thank you

  Justin Ferello
  Technical Support Specialist
  KBZ, a Cisco authorized dealer
  http://www.KBZ.com
  e/v: [email protected] / * /

  My bad, did you fill an A2Q for deployment of tis? Without the A2Q Webex is not configurable on MSDS.

  It will be better if you open a TAC case, they can check the side so Webex.

  Kind regards

  Tere.

  If you find this article useful, please note!

• Error with duplicate DTD SYSTEM integration

  I work with one of the latest releases
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  "CORE 11.2.0.1.0 Production."
  AMT for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  I try to insert xml into an XMLType table and confirm it with a DTD. To achieve this, I created a folder/xmlmine/dtd and applied this acl
  

  <acl description="dilbertacl" xmlns="http://xmlns.oracle.com/xdb/acl.xsd" xmlns:dav="DAV:" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/xdb/acl.xsd                                    http://xmlns.oracle.com/xdb/acl.xsd" shared="true">
        <ace>
          <grant>true</grant>
          <principal>DILBERT</principal>
          <privilege>
            <dav:all/>
          </privilege>
        </ace>
      </acl>

  I then transferred this dtd to play.dtd with
  

  DECLARE
    b BOOLEAN;
  BEGIN
    b := DBMS_XDB.createResource('/xmlmine/dtd/play.dtd',bfilename('dtds', 'play.dtd'));
  END;

  and I can see with
  

  select xdburitype('/xmlmine/dtd/play.dtd').getCLOB() from dual;
  
  <!-- DTD for Shakespeare    J. Bosak    1994.03.01, 1997.01.02 -->
  <!-- Revised for case sensitivity 1997.09.10 -->
  <!-- Revised for XML 1.0 conformity 1998.01.27 (thanks to Eve Maler) -->
  
  <!ENTITY amp "&#38;">
  <!ELEMENT PLAY     (TITLE, FM, PERSONAE, SCNDESCR, PLAYSUBT, INDUCT?, PROLOGUE?, ACT+, EPILOGUE?)>
  <!ELEMENT TITLE    (#PCDATA)>
  <!ELEMENT FM       (P+)>
  <!ELEMENT P        (#PCDATA)>
  <!ELEMENT PERSONAE (TITLE, (PERSONA | PGROUP)+)>
  <!ELEMENT PGROUP   (PERSONA+, GRPDESCR)>
  <!ELEMENT PERSONA  (#PCDATA)>
  <!ELEMENT GRPDESCR (#PCDATA)>
  <!ELEMENT SCNDESCR (#PCDATA)>
  <!ELEMENT PLAYSUBT (#PCDATA)>
  <!ELEMENT INDUCT   (TITLE, SUBTITLE*, (SCENE+|(SPEECH|STAGEDIR|SUBHEAD)+))>
  <!ELEMENT ACT      (TITLE, SUBTITLE*, PROLOGUE?, SCENE+, EPILOGUE?)>
  <!ELEMENT SCENE    (TITLE, SUBTITLE*, (SPEECH | STAGEDIR | SUBHEAD)+)>
  <!ELEMENT PROLOGUE (TITLE, SUBTITLE*, (STAGEDIR | SPEECH)+)>
  <!ELEMENT EPILOGUE (TITLE, SUBTITLE*, (STAGEDIR | SPEECH)+)>
  <!ELEMENT SPEECH   (SPEAKER+, (LINE | STAGEDIR | SUBHEAD)+)>
  <!ELEMENT SPEAKER  (#PCDATA)>
  <!ELEMENT LINE     (#PCDATA | STAGEDIR)*>
  <!ELEMENT STAGEDIR (#PCDATA)>
  <!ELEMENT SUBTITLE (#PCDATA)>
  <!ELEMENT SUBHEAD  (#PCDATA)>

  When I proceed to insert with

  INSERT INTO sestable VALUES (XMLType(bfilename('xmls', 'all_well.xml'),nls_charset_id('AL32UTF8')));

  the top of the xml document looks like

  <?xml version="1.0" encoding="WINDOWS-1252"?>
  <!DOCTYPE PLAY SYSTEM "/xmlmine/dtd/play.dtd" [
  <!ELEMENT PLAY (TITLE, FM, PERSONAE, SCNDESCR, PLAYSUBT, INDUCT?, PROLOGUE?, ACT+, EPILOGUE?)>
  <!ELEMENT TITLE (#PCDATA)>
  <!ELEMENT FM (P+)>
  
  ........
  
  <!ELEMENT SUBTITLE (#PCDATA)>
  <!ELEMENT SUBHEAD (#PCDATA)>
  ]>
  <!-- DTD for Shakespeare    J. Bosak    1994.03.01, 1997.01.02 -->
  <!-- Revised for case sensitivity 1997.09.10 -->
  <!-- Revised for XML 1.0 conformity 1998.01.27 (thanks to Eve Maler) -->
  <PLAY>
    <TITLE>All&apos;s Well That Ends Well</TITLE>
    <FM>
      <P>Text placed in the public domain by Moby Lexical Tools, 1992.</P>
  
  ....
  
        <STAGEDIR>Exeunt</STAGEDIR>
      </EPILOGUE>
    </ACT>
  </PLAY>

  but when I try to query the table with something like

  select xtab.COLUMN_VALUE
  from sestable, XMLTable('let $i := /PLAY/ACT/SCENE/SPEECH[SPEAKER eq "DUKE"]/LINE
                  return count($i)' PASSING OBJECT_VALUE) xtab;

  I get an error
  LPX - 00107:Warning: 'PLAY' element has several statement
  
  If I remove the keyword SYSTEM and simply inline DTD, everything works fine.
  
  I suspect that the parser is Inline DTD but does not remove the directive of the SYSTEM, including therefore the DTD twice, where the error. Any suggestion on how to solve this problem?
  
  Thanks in advance

  What should I do now, because binary XML doesn't validate? Is there another way to validate XML with a DTD document in addition to directly copy and paste the file DTD?

  Well, as a workaround, you can disable the DTDS validation once the document has been inserted in the table.

  SQL> select storage_type from user_xml_tables where table_name = 'PLAYS2';
  
  STORAGE_TYPE
  -----------------
  CLOB
  
  SQL> SELECT count(*)
    2  FROM plays2 p
    3     , XMLTable( '/PLAY/ACT/SCENE/SPEECH[SPEAKER eq "DUKE"]/LINE'
    4                 passing p.object_value ) x
    5  WHERE XMLExists( '/PLAY[TITLE=$title]'
    6                   passing p.object_value
    7                        , 'All''s Well That Ends Well' as "title" )
    8  ;
  SELECT count(*)
  *
  ERROR at line 1:
  ORA-31011: XML parsing failed
  ORA-19202: Error occurred in XML processing
  LPX-00107: Warning: element "PLAY" has multiple declarations
  Error at line 24
  Error at line 7
  
  SQL> alter session set events '31156 trace name context forever, level 2';
  
  Session altered.
  
  SQL> SELECT count(*)
    2  FROM plays2 p
    3     , XMLTable( '/PLAY/ACT/SCENE/SPEECH[SPEAKER eq "DUKE"]/LINE'
    4                 passing p.object_value ) x
    5  WHERE XMLExists( '/PLAY[TITLE=$title]'
    6                   passing p.object_value
    7                        , 'All''s Well That Ends Well' as "title" )
    8  ;
  
    COUNT(*)
  ----------
          19
  

  If this is a bug report, or you can do / have already done this?

  I don't see anything in the documentation about binary XML and DTD validation, so yes I think you should report it to the Support of Oracle.

• How can I add a booking online system integrated into a Web of Muse site?

  I create a site with Muse for a guesthouse. How can I add a booking form that allows people to choose dates and rooms available and make a reservation with a card? Are there templates for those forms that plug into sites of Muse? and tutorials on how to build them. Can I do this with business catalyst?

  If you have the creative cloud subscription.  It allows you to buy and launch five free sites (on BusinessCatalyst), which are web solutions of basic in nature and did not include the blog feature. To use the Blog feature in BusinessCatalyst, you will need to upgrade the site to siteplan superior. So, you can choose between the Business catalyst, Wordpress, Tumblr, Google Blog, etc.

  When you upgrade a business catalyst website, you get a few extra features with blog. So according to your requirement, you can go for the plan. Already, you have a price for the site plan of the BC, a detailed breakdown of what is included in each hosting plan, check out this article.

  Ventilation of the detailed plan

  Also, I found a link that shows how to integrate wordpress blog on your website Pro behance, in case you need.

  https://help.Behance.NET/entries/23181846-ProSite-can-I-integrate-my-blog-into-ProSite-

  Let me know if you have any question.

• Integration of CUCM, CTS and TMS

  We currently have a 8.6/CTS-Man/CTMS CUCM environment for our telepresence system.  All systems are CTS only.  Currently, connect us to a Tandberg system via Server CUBE/VCS/telepresence.

  We are looking at the possibility of integrating the two systems together.  This would involve decommissioning our CTS-man and using their existing planning TMS.  Networks would be open to each other so that they didn't cross highway of CUBE/VCS.

  Can someone tell me please to some documents on the integration of the TMS with our CUCM for planning?

  Furthermore, is it possible to have a single MSDS to perform the planning on the two CUCM registered CTS and saved VCS Tandberg endpoints end points, as well as to perform planning tasks for Community trade marks and MSE8000/telepresence Server?

  Thank you

  Hi Nick

  It is a very good question, and the bellows are drawn from the responses on the features that each product can provide you (CTS - Man and TMS) however as we know the TP Cisco world is changing and moving quickly if the bellows has been updated / changed and can someone comment on this topic will be great for us

  Meetings 1-booking

  TMS:

  -adhoc and meetings,

  -3rd-party endpoints reservation.

  -Ms Exchange, Domino, and API

  CTS - Man:

  -mainly used for endpoints STC booking

  -You can book and include cisco webex

  -Ms Exchange, domino and API

  2 features

  TMS:

  -End suppliers Multi points

  -Telephone directories

  -planning of conf

  -management endpoints (monitoring, Reporting, strong alerts... etc)

  -commissioning

  -integration with 3rd party such as Ms exchange

  -"There is no button to push" for the endpoints of CTS (you can add CTS alis for TMS rooms and book it or add the E164 of the external endpoint CTS as a participant and not these means are a button to push the meeting!

  CTS-MAN

  -integration of calendar

  -Midware between CTS, CUCM system and society of calendaring system

  -provide 'a button to push' scheduled meetings

  -provide interoperability simplified such planning via Cisco MXE

  -Live English option and CTMS geographical selection

  for each of them can provide you with options and features and its depends on the needs of your business, you could keep both or just go with one, if you have endpoints of VCS I would say for sure to the TMS

  HTH

  Marwan

• TMS directory system endpoints source folder

  Hello

  I came across a rather baffling problem with a few cases of TMS and I can't for the life in me know as to why this is happening.

  I get the following.

  in the option for creating source directory Cisco TMS, I create a new directory and link with the MSDS files and select the folder where all the end points, this creates the entries in the phone book for me as I expect with one exception, I will detail below.

  H.323 = [email protected] / * /

  H.323 = [email protected] / * /< this="" is="" where="" the="" issue="">

  IP = IP address

  I find that on some systems (this doesn't happen to all systems) in the second entry of H.323, the H.323 entry where I expect to see the directory (also known as E.164 number) number I see a URI where a field has been added at the end of the number, I'll give you a few examples below.

  DN = 1234

  set field = @video.net

  random field = @newdomain.com

  IP = 10.10.10.1

  I expect to see the following.

  H323 = [email protected] / * /

  H323 = 1234

  IP 10.10.10.1

  but I don't actually see

  H323 = [email protected] / * /

  H323 [email protected] / * /

  IP 10.10.10.1

  I have purged the TMS systems and added, I searched through the xconfig for the NouveauDomaine which is invalid and I can't find anything anywhere other than on the list of areas configured SIP VCS parameters in the second area, endpoints have disabled by default SIP and in both cases I expect to see that under a SIP entry not an H.323 entry

  This is the origin of the problem of when a user tries to call via the Directory site remote also responds to busy VCS is unable to find the appropriate directory number because the location request contains the domain as well as the DN.

  I worked around this by adding a transform to the VCS who sees the patter of specific numbering and the bands of the area, so the calls work, but I still need to understand as to what is causing this behavior.

  If I had to create the directory entries by importing information from the record of the VCS seem to be correct, its only when I try to import the entries of the endpoint via the system folder in TMS (or more exactly to import the information stored in the file on the endpoint system) I see the problem.

  a very popular Adviser.

  See you soon

  Dave

  Hello

  Picked up that the case with David and it seemed that at least on the systems the international denomination on the mxp MXP has been configured. The area of intellectual property also has a configured domain uri that has caused the other symptoms. We where able to erase the questions but still yet to see if the client is actually affected by the same configuration "mistakes".

  / Magnus

  Sent by Cisco Support technique iPhone App

• TMS - end Cts points

  Hi all

  Last weekend, I upgraded Cucm to the latest version, also 1.9.1. Cts TMS version 13.1.2 endpoint software.

  After that most of the status of Cts endpoint runs in "Unregistered with CUCM" at TMS. He was working before the upgrade.

  To test, I have been removed and added some new endpoint to Tms, but it is not fixed. Its really weird problem because of the status of cts endpoint couple works correctly.

  Y at - it suggestions on this subject?

  Kind regards

  Baris.

  It is a reported bug, i.e.CSCua51358.

• The integration of the system prompt always to start Thunderbird, even if 'Always show at startup' is disabled

  Whenever I run Thunderbird, I get the "System Integration" notification area even if the option "Always perform this check at startup of Thunderbird" is NOT checked. Please, let me also be clear, I DON'T want integration system. Therefore, I unchecked all boxes that are not grayed out and selected 'Skip Integration', since there is not a box for "don't fit". Can someone tell me please how to stop this aggravating box continue to appear, without integrating Thunderbird or use a different e-mail client.

  I am running: operating system: Windows 10 Thunderbird homepage: 45.5.0

  You have another installed e-mail client/program? If this isn't the case, then why not let Thunderbird to be your default e-mail client/program? 'Systems integration' means that he will say that any attempt in Windows to send an e-mail to trigger Thunderbird Windows.

  If you do want another program to be the default e-mail program, then try this.

  First of all, make sure that the other e-mail program is configured to be the default e-mail program in Windows:

  Open Windows Action Center (click the icon in the lower right corner of your screen, which is to the right of the digital clock). Click on "System", then "Default apps" on the right side. Under "Choose default apps" on the side right, click the e-mail program and change it to your preferred e-mail program.

  Now in Thunderbird: Thunderbird menu: Options: Advanced: general tab: click "check now".

  Uncheck the box E-mail and Newsgroups (or that you can and want to deselect), and then click "Set as default", which means only 'OK' or 'Apply' in this environment. (See image).

  Then it must not appear again.

  This solution was causing this issue .