Compurter restarts when the iPhone is connected

Similar Questions

• Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  While driving, I noticed that all the comments navigation are also sent to my phone, creating a distraction while driving. Is there an automatic way to stop sending alerts to my watch whil the iPhone is also connected to Carplay?

  If this is not the case, consider this as your comments/request. If there is, please share. I do not want to switch manually and on all notifications when you use Carplay.

  Best regards

  Q

  Hello

  It may help to place your watch in mode do not disturb before driving:

  -On your watch: when the time display, drag upward on the dial of the watch > drag left/right to the gaze of settings > tap the moon to turn do not disturb on and outside.

  You can also disable mirroring for do not disturb mode. When mirroring is enabled, turning on do not disturb on your watch also automatically her allow on your iPhone.

  -On your iPhone, in the application of Eve, go to: Watch My > General > do not disturb - turn the market / stop iPhone mirror.

  To send comments and/or service requests to Apple, you can submit the form here (all comments are read):

  https://www.Apple.com/feedback/watch.html

  (This is a supportive community focused on user - you don't talk to Apple here).

• Computer stops with a blue screen with error fatal when the iPhone is connected

  I know it may not related to windows but I have tried other sites on this issue. My computer stops and a blue screen appears with the message saying fatal error when the iPhone is connected. I tried with or without iTunes installed.

  First without iTunes installed, windows will be asked to USB drivers for the iPhone, but I couldn't find anything on the Apple Web sites if I click No., a message appeared, saying that it might not work properly because he could not recognize my device. Second, I have the latest version of iTunes installed, windows began to recognize my iPhone but stop immediately after that with a blue screen fatal error and messeage saying updating the BIOS. Updated the BIOS of the computer, but nothing helped.

  My computer runs on Windows XP Home Edition SP3, processor Intel Core Duo 1'66 GHz, 2 GB Ram, Intel GMA 950, Intel 945 GM chipset.

  I thought that it requires no USB driver for iPhone on Windows or same iTunes unless I wanted to use it for synchronization or characteristics. Please forgive me if I'm wrong, because I tried it on other computers and it had no problem with the USB drivers and Windows can install by itself.

  Thank you.

  Hi 1980ckc,

  1. have you tried to connect the iPhone to a different USB port?

  You can check out the apple support link and check if it hleps:

  iPhone, iPad and iPod touch: Windows displays a blue screen message or stops when you try to connect to your device.

  http://support.Apple.com/kb/TS1502

  Also check out the apple discussion link:

  http://discussions.Apple.com/message.jspa?MessageID=10339681

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Automatically open iTunes when the iPhone is connected

  At the same time when I connected my iPhone to my computer it opened iTunes automatically. Now he doesn't. Is there a setting I need to adjust or it can be done manually now?

  Thank you

  Bob

  Check the iTunes summary page when your iPhone is connected to iTunes. Make sure that the synchronize option automatically is selected under 'options '.

• How can I change the PC than the 6s iPhone more synchronizes to, both wireless and when the iPhone is connected?

  How can I change the PC than the 6s iPhone more synchronizes to, both wireless and when plugged in? I recently upgraded my PC. I have restored my backup of iTunes on the new computer and it works fine. The iPhone, however, is waiting to synchronize wirelessly to the PC that I no longer use, and iTunes does not recognize my iPhone when I plug.

  I came across this problem recently and had to talk to Apple

  If you mean the computer name listed in the settings - iTunes WiFi - Sync

  Then, it's exactly what I'm talking about

  I had to not reset my - no joke - general - reset - Reset all settings - no content has been damaged and there is NO need for a restore

  Lost among others

  All my WiFi passwords

  All of my alarms

  All my preferences of location services

  BUT he did remove the old name of the computer from there

• iTunes will not launch when my iPhone is connected to the pc

  He used to work.  When I open itunes manually iphone 6 syncs and appears in itunes.  Most of the fixes I've seen are for Mac etc..  Is this still a problem of ios on my phone?  I have the latest update to 9.2.1. He has not worked in quite awhile, do not remember what is the last update, he worked with.

  I did a lot of tests by Apple.  Everything was working and in order.  Diagnosis of NAB, which is located in the menu helps in itunes.  The only thing that seemed wrong was that I was not to run the program as an administrator, who I am.  I close itunes and right-click on the icon of itunes and click on "run as Administrator".  I unchecked the option to "automatically sync when this iphone is connected."  Then, I closed itunes.  Right clicked on itunes and "Ran as Administrator" once again I then checked "automatically sync when this iphone is connected".  Close itunes again (while I was doing all this I disconnect and reconnect the iphone).  Then, I plugged in my iphone to firewire (connected to the laptop), once again and low and here's open itunes.  Hop this help someone as well.

• Unable to receive calls from Apple Watch, using WIFI AT & T calls, when the iPhone is turned on, turned off or in Airplane Mode.

  I work on this issue and wanted to involve the community.

  I have tests the functionality Apple Watch and have been unable to solve my problems with WIFI call. I use the AT & T and I am connect to the strip of the 5 GHz on my router Xfinity.

  I am able to make/receive calls from my iPad and Mac laptop when iPhone is off / Mode plane; However, this feature does not work on the watch. I can make and receive calls from the watch when the phone is turned on.

  Another problem is that I am not able to send and receive messages (blue or green bubble) of the watch - once again when the phone is turned off or in flight Mode

  I'll copy in 2 portions of the Web site: http://help.apple.com/watch/

  http://help.Apple.com/watch/#/apd0443fb403

  If your Apple Watch is in range of a Wi - Fi network that the iPhone is connected to before, you can always do the following (even if the iPhone is off):

  • Send and receive digital messages Touch
  • Send and receive messages using Messages
  • Make and receive phone calls (if you have active calls, Wi - Fi, and you are within range of a Wi - Fi connected to your iPhone before)
  • Check current weather conditions
  • Track your inventory

  http://help.Apple.com/watch/#/apd2fe746e86

  Make calls via Wi - Fi

  If your cellular operator offers Wi - Fi calls, you can use Apple Watch to make and receive calls over Wi - Fi instead of cellular network - even when your pair iPhone isn't with you or is disabled. Apple Watch comes to be in range of a Wi - Fi network that is connected to your iPhone in the past.

  To see if your carrier offers Wi - Fi calls, see the article Apple Support phone with Wi-Fi calls, then enable the calls on your iPhone and Apple Watch Wi - Fi.

  Note: You can make emergency calls via Wi - Fi, but when possible, use rather iPhone over a cellular connection - your location information will be more specific.

  Enable on iPhone Wi - Fi calls. On iPhone, go to settings > phone and turn on Wi - Fi calling and application to other devices.

  Enable calls on Apple Watch Wi - Fi. Open the Apple Watch app on iPhone, tap My Watch, tap phone, then turn on Wi - Fi calls. If you do not see the parameter, make sure that you have activated calls on iPhone Wi - Fi.

  Answer please if you are able to perform any of these functions! And any troubleshooting you can think!

  AspiringAppleGuru wrote:

  I have... to connect to the 5 GHz on my... router bandwidth.

  Hello

  These features are not available because Apple Watch cannot connect to a network of GHz Wi - Fi 5.

  If your watch is not connected to your iPhone via Bluetooth, but lying in a 2.4 GHz Wi - Fi network your iPhone plugged in before, the watch can connect to this network and you can continue to use certain features, including Wi - Fi calls (when it is supported by your operator, you already have in place).

  More information:

  On Bluetooth and Wi - Fi on Apple Watch - Apple Support

  Use Apple Watch without her sister iPhone - Apple Support

• I lose my Internet on my XP computer when the printer is connected to wireless.

  My new hp6510 wireless printer works fine but my internet connection is lost when the printer is connected to wireless. I use the printer with a linksys E3000 router. The network has a XP computer, a computer with win7 64-bit. I don't have a problem with the computer to win 7, but the xp computer will drop the internet connection and sometimes I can make it work by repair of the connection to the router, but sometimes I need to restart the computer. If I stop the wireless connection and use the USB it works OK. I tried to get help from HP and Linksysm but no help. I would like suggestions.

  Hello

  Please, try the next workaroud and let me know any changes:

  1. In the computer, click the HP Photosmart 6510 .
  2. In the printer Preferences, click the estimated ink levels.
  3. Click on the tab Advanced settings .
  4. Under view alerts, select the 2nd option - Show alerts ink when I print to me.
  5. Click on close, restart the PC and follow for any change.

  Please let me know any progress,

  Shlomi

• Internal speakers work but no sound when the headphones are connected.

  Internal speakers work, but no sound when the headset is connected Mr. fix gives a clean and level flight controlpannel indicator report / sound show sounds present but no sound on 3.5 mm jack audio 6.0 vista Home Basic travel mate acer 2480 laptop.

  Ive seen to be a common problem and have tried everything short of putting my computer or the cabel in the freezer for this problem, although I had an old pair of computer speakers that the power of the headphone plug in my garage-30 and a jack 3.5 cold didn't help.

  Most recent driver realtek audio and Manager running audio acer, everything seems fine all levels on and not cut anything off
  Lists of control pannel/sound/speakerproperties
  control information
  Realtek High Denifnition
  Reatek'a

  Jack information
  LR ATAPI internal ATAPI
  LR 3.5 mm Jack (will disappear if not plugged headphones\auxcabel)

  some levels are muted
  Advance tab default settings
  quality of studio 24 bit 48000 Hz

  boxes of exclusive mode checked (when it is disabled, that no sound was heard)

  Information appears a jack was pluged into and when unplugged.

  the computer knows its their and it shows his work but ive tried several pairs of headphones, including the new ipod with the remote, I tried an old pair of speakers that have no other energy source that 3.5 mm cord all work witch on my i pod, I also tried pluging in a splitter first and also an adapter to use a guitar cord pluged amp in an another apapter back down to 3.5 mm a little stupid and redundant but I didn't lie when I said I TRIED EVERYTHING I could think maximum\ read forums\ many watch on youtube.

  computer repair guy told me that fault call manufacturing equipment but guaranteed was 2 weeks upwards.
   
  I do not think it is a matter of hardwear tho and am convinced that it can be resolved is so close to work, I'm sure there must be a setting or patch or codec sumthing that will correct the problem, but it's my first (LIRA) ask for help.

  With frequent this problem or other similar appear from what my research has shown that I don't know that it can be resolved, or millions of laptops with drivers realtek audio hd are all defective.

  My next try is an external usb sound card. I tried already but no stores in my area have them (Wal-Mart, the source, Staples), all had never heard what I was talking about. I saw on the web less than 5 dollars but have no confidence in the sites offering the devices. Has anyone bought from a trusted site.  could talk to the teak of microsoft but they wanted to charge me $ $50 so decided to save money to buy a card usb sound, if I can't solve the problem.

  Sorry for any ignorance or typos and long reading but I hope someone can help with this problem

  Check with the manufacturer of your system's support and their forums (if any).

  Have you checked on the website of the manufacturer of the device for the latest drivers?

  Realtek - HD Audio Codec Driver right side
  http://www.Realtek.com.tw/

  Download - SAVE - will click with the button straight on and RUN AS ADMIN

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.
  Rob - bicycle - Mark Twain said it is good.

• MacBook randomly landed volume when the headphones are connected.

  Hey,.

  There is something wrong with my MacBook. When I plug my headphones, the Mac randomly landed the volume at any time. I thought the keyboard can be broken, but it doesn't happen when the headphones are connected so it may be a problem with the software (I think?). Has anyone experienced the same problem? Do you know how to fix this?

  My Mac is the MacBook Pro 15 "retina (mid-2014) running the El Capitan 10.11.6

  Please try resetting the memory NVRAM and SMC.

  Reset the NVRAM/PRAM memory.  http://support.Apple.com/kb/PH18761

  Reset the SMC. Choose the method for "If the battery is good behaviour."

  https://support.Apple.com/en-us/HT201295

• don't want itunes to automatically start when the ipod is connected to the pc

  How can I prevent itunes from automatically launching when the ipod shuffle is connected or when the pc starts?

  Open iTunes, go in Edition > Preferences > devices and place the check mark to prevent sync automatically when the device is connected.

• How to know when the iphone was made.

  I was wondering if you know when the iphone was made because my iphone 5's battery keeps dying pretty quickly

  and online on Apple.com it says that some iphone 5 s batteries would be replaced because of defective made batteries.

  Thank you

  The battery replacement program is for iPhone 5, iPhone 5 s no

  https://www.Apple.com/support/iPhone5-battery/

• Freezing of L650 - 1 k 5 satellite when the charger is connected

  Hello

  I just bought a Toshiba L650 - 1 k 5 in a store of Toshiba with no OS on it. I put on a Windows 7 Professional X 64 purchased, legal with all toshiba drivers necessary. It was a week ago.
  There are a few days that the laptop has begun to freeze for no reason but only when the charger is connected. It was freezing with no runnig software, all of a sudden, when I went to the control panel and device control a yellow triangle were shown, but when I clicked on the failure notice it did not show anything a few clicks later, it showed that something wrong with one of the PnP devices, but none has been mentioned. I installed sp1 and a couple of drivers from Toshiba Web site and the machine still keeps freezing with no reason, especially when the charger is plugged?

  What is going on? Should I put a x 32 windows 7 on or what?

  Thank you

  Tomo

  Hey Buddy,

  I don t think that the 64 bit version of Windows 7 is the problem: is IT s software/driver related hardware problem or problem, but it is not easy to say because your computer laptop wasn t equipped with operating system preinstalled so you can t test with the factory settings.

  What you can try is reinstalling Windows 7 new with all the drivers prétestées on official website of Toshiba. Then, make sure the Device Manager shows no yellow exclamation more and test again the situation as a whole.

  If the same error, it seems to be a hardware malfunction and an authorized service provider can help you get rid of this.

• Hit to the broad area when the server is connected to the internet

  We have a new server running windows standard server 2008R2. When the server is connected to the internet, the computers on the domain are faced with offshore and they receive the error message saying "Unable to connect to the database". How we solve this problem?

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  It will be useful.

• You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed

  You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed. Thanks for your help

  diana73,

  First of all, make sure that you're connected Administrators account to do.

  How to change a drive letter to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start , click run and type compmgmt.msc .
  3. In the left pane, and then click disk management .
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths .
  5. Click change .
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK .
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  Good luck! Please rate me upward if you find my post helpful. Thank you!