System will not finish sutting down

Similar Questions

• Black vista Windows 2009! system will not stay running...

  my windows system will not stay running and shuts down my computer after maybe running for 10-15 minutes... says also download 3 of 3, but instead of blocking it loads windows and then I have no sound what either.  also used windows open sometimes it always ask if I want to run windows normally know, my computer was repaired and when I came back started all this junk, please if someone can help me send me an email to * address email is removed from the privacy *. and thank you for your help.  Oh yes, it keeps asking me for my windows vista black 2009 key that I do not have...

  Black of Vista is NOT supported by Microsoft.

  Go to where you downloaded from / got fix for support.

  Mick Murphy - Microsoft partner

• windows\system32\config\system\file is damaged or missing, system will not start, I have not connection wired, software was on the laptop at the time of purchase

  system will not start, I have not connection wired, software was on the laptop at the time of purchase.

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Try to burn a CD. The system will not recognize the blank disc or let me burn__

  Try to burn a CD. The system will not recognize the blank disc or let me burn... says there is no disc inserted

  Hello

  Have you tried to close all programs and then insert the disc? Restart the 1st and then try it.

  If no joy:

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• err3 Err1 on startup. system will not f8 or f11 and says no operating system found? What the? A windows vista family premium, a second ago...?

  I hope someone can help.  I can't fly on the f11 or f8 function keys. I have tried bios updated default did not work.  Says Bios and video are shawdowed.  No TPM or TPM has problem.  Fixed Disk0 and fixed Disk1 - F.2a Phoenix BIOS 4.0 Release 6.1 version.  So can't do the system restore? Where is my operating system?  I lost everything in C and D drives?  System will not start or start at all.  Do I have to re - install the OS Windows Wista?  Work about to go back and fix?

  Hello SteveO_1968,

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

  1. Put the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted.
  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  4. Click repair your computer.
  5. Click the operating system you want to repair, and then click Next.
  6. In the System Recovery Options dialog box, click command prompt.
  7. Type Bootrec.exe, and then press ENTER.

  Note To start the computer from the Windows Vista DVD, the computer must be configured to start from the DVD drive. For more information on the configuration of the computer to start from the DVD drive, see the documentation provided with your computer or contact the computer manufacturer.

  Bootrec.exe options

  The Bootrec.exe tool supports the following options. Use the option that suits your situation.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  • bcdedit/export C:\BCD_Backup
  • c:
  • Boot CD
  • BCD attrib s h - r
  • Ren c:\boot\bcd BCD.old
  • Bootrec /RebuildBcd

  / FixMbr

  The /FixMbr option writes a MBR compatible Windows Vista on the system partition. This option does not overwrite the existing partition table. Use this option when you need to solve problems of corruption of MBR, or when you need to remove the non-standard code from the MBR.

  / FixBoot

  The /FixBoot option writes a new boot sector on the system partition by using a boot sector that is compatible with Windows Vista. Use this option if one of the following conditions is met:

  • The boot sector has been replaced by a non-standard Windows Vista boot sector.
  • The boot sector is damaged.
  • An earlier Windows operating system has been installed after the installation of Windows Vista. In this scenario, the computer starts by using Windows NT Loader (NTLDR) instead of Windows Boot Manager (Bootmgr.exe).

  / ScanOs

  The /ScanOs option scans all disks for installations that are compatible with Windows Vista. In addition, this option displays the entries that are currently not in the BCD store. Use this option when there are installations of Windows Vista which is not in the Boot Manager menu.

  / RebuildBcd

  The /RebuildBcd option scans all disks for installations that are compatible with Windows Vista. In addition, this option allows you to select the facilities you want to add to the BCD store. Use this option when you need to completely rebuild the BCD.

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• My system will not download upgrades and assistant says update error 0x8024402c

  * Original title: win 7 64-bit ultimate on asus kgpe map server dual socket

  my system will not download upgrades and assistant says update error 0x8024402c (2016-03-29-T-10_53_07a)... whats up?

  Turns out that my computer has a virus, of which a part had apparently obtained in the area of the 100 MB of my raid0 array system.  When I reloaded the os I've removed then reinstalled the partitions, then reloaded the software and my problem calmed.  Thanks for your ideas.

• resettinng email and password, when the adobe system will not accept?

  Cannot reset my username and password Adobe system will not accept?

  Hello

  Please see account Adobe ID and login troubleshooting

  Hope that helps!

  Kind regards

  Sheena

• I have a new card, I try to change my payment information, the system will not let me. Let's not say address. Ive tried several ways to enter address >?

  I have a new card, I try to change my payment information, the system will not let me. Let's not say address. Ive tried several ways to enter address >?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Windows update problem update 3 of 3 - system will not display anything more than 0% finished and continually reboots over & above.

  I recently downloaded an "update" to the computer of my son (who is from Vista Premium), the system is locked on the 3 of 3 update - system poster not didn't any what more than 0% finished and restarts constantly on & above. I can't seem to break the chain of the system update & I don't have a recovery disk. All that I can do rather than scrap the computer?

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358  
  Method 2: Start the computer in safe mode and then use the system restore feature

• System does not close completely down.

  Hello

  I have a Pavilion laptop, G6, with Windows 8, and it seems not entirely closed. It will go to the closure of screen and then the screen turns white and the laptop seems to be in a low power state. Start button / stop is turned on and the Wifi button.

  I tried:

  • Removing battery
  • System restore
  • Remove the battery and hold the power button for 20 seconds

  Any help would be popular!

  Appreciation,

  Windows 8 comes with diagnostic tools very good - if you have not had previous experiences, their execution, this is probably a time familiarizing yourself with the Toolbox:

  Laptop computers HP - test of hardware failures (Windows 8) - c03467259

  The issuemight be if the system shutdown due to software, in other words, something in the environment of OS, then it might be in the BIOS (down a real operating system level) or in the material.

  This does not mean you na not miss something in the operating system-, but there are tools to help you refine the hotbeds of tension of material possible and eliminate these in the list.

  What to do next?

  If the extracted material - if you can't find the problem, if the problem is hardware, or if the question remains a mystery and you're ready to throw your computer out the window beautful - wait!

  You didn't have the system very long if you're running Windows 8 on - call HP directly for assistance.  If the system experiences a hardware failure, the call earlier rather than later is better.  It will not very long to fix.

  Before you call HP:

  Run the command "SFC/scannow" at startup or in Windows 8

  ==================================================================================

  • Make sure all your drivers are up to date - they are, or you wouldn't ask for help - it's basic Admin 101.

  Start by creating a place to which you can go back in case things do not work as you expect:

  Create a restore point

  Install the software and drivers from the HP site

  Go to the top of the page of the forum Support and drivers HP

  • If you are prompted, enter your country or region and
  • Enter your computer model information
  • Access to the software and drivers...
  • Enter your operating system from the menu drop-down...  Scroll to the bottom
  • Select the desired category Software - Solutions > driver - keyboard, mouse and input devices

  NOTE: Download ONLY the concerned drivers and software for YOUR hardware - note that in the website you can find more than one kind of driver for more than one computer model - it's normal, but it does not mean that YOUR computer uses all proposed software.

  • Develop and decide if you need to install this package.
  • Make sure that you download and install only the latest versions of each driver or program.
  • Save the Setup *.exe appropriate on your computer package

  NOTE name and location -likely the *.exe file to save to "downloads".

  • Install the software / driver installation package: If you have control of "Admin", you can highlight the package and "double-click" to install, if not right click, select "Run as Administrator" and install.

  NOTE: sometimes there is a lot of information in the computer Web site.  Take a look at what's available and bookmark the page later.

  ==================================================================================

  If you decide to update your BIOS,

  • Disconnect all the USB drives
  • Always run power cable
  • Do not touch the system while the update is in progress
  • Optional: leave wireless touch YOU, but turn off the router (make sure that there is no interruption)

  ===================================================================================

  • Make sure your system is saved AND make an Image of your system in case you need to send to the computer for repair:

  History of files is very easy to use.  He works on 'Libraries' and essentially backup of your default user account.  To add a folder to your libraries, right-click on > add to library > if you have the 'create new library '.  Pouf!  The folder is added to the history of the file backup.

  If you do not have a hot spare hanging out for your file history to write, buy a 64 GB USB key and use it - Poof! Instant historical destination of files disk.

  HP - backup of your files (Windows 8) computers

  A custom Image for the 'rest' of your computer - Nice:

  It's the Windows 8 Refresh , which also backs up your programs / applications.

  Create a custom recovery tool to update your PC in Windows 8

  When you call HP:

  Have your information at your fingertips: product number, serial number, contract number (if you have CarePack)

  • Be prepared to tell your story to more than one person.
  • Be polite, persistent and articlulate.  Don't waste time yelling at the tech.  They have lives.
  • If you do not speak to someone who understands your problem, ask to speak to someone else.  You have the right to be heard.
  • Be Polite, persistent and be prepared to repeat yourself (as I do here).

  Good luck!

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  See a Post that is useful, makes you smile, or who teaches you something you didn't know?

  Your HP Experts are here to help.

  Click on the Stars Kudos to say thank you for the help.

  When a fix / workaround is successful:

  Click on this message "accept as Solution" to make it easier for others to find the Solution.

  Year of 2012 2013 snake Dragon

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

• the system will not stop after the new update

  System was updated with the new updated 05/24 and now will not shut without using the power button / stop what happened, how this can be corrected?

  FWIW, software Wacom has started to cause a problem with OSX 10.11.5. If you have installed you need to uninstall or check and see if the latest drivers Wacom released a few days ago helps. If you have any Wacom software, there are some others mentioned in the CSA programs that cause the same symptom. I don't remember which off the top of my head.

• I can't install Silverlight with my firefox browser. I get an error message indicating that my system will not support 64-bit silverlight.

  I have a 64 bit system running Vista home premium 6.0.6002 and Firefox 5.0.1. I can't load SIlverlight for netflix streaming?

  Hello zuzann, first of all please urgently update firefox and all of your existing plugins: there are dozens of highly critical vulnerabilities fixed since version 5 of firefox!

  Update to the latest version of Firefox

  https://www.Mozilla.org/pluginCheck/

  & what about silverlight: you must install the 32-bit version, because firefox is also a 32-bit application for now and will not work with plugins that are 64-bit.

• KB978637 systems will not install.

  Update for Windows 7 for x 64-based systems KB978637 will not be installed.  Error code 80070057.  Have tried and failed to set up since 30 March

  80070057 - ERROR_INVALID_PARAMENTER.  Third party service that is running in the computer creates the problem.  Please do a clean boot, and then install the updates.

  http://support.Microsoft.com/kb/947821

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  TaurArian [MVP] 2005-2010 - Update Services

• I can download all windows updates, but my system will not configure and install them. I have Vista, what happens?

  nfkgjaLRjh:KF'e; ktg; B; love my lifeE

  Hello

  Do you get any error messages? More detail of what is happening and noted that allows us to help you.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:
  
  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• System will not be activated. Receive the error message "system could not establish a connection with the activation server.

  Activation.

  My OS system has been altered, so I formatted and installed new, but can not activate. I have this installation id 348020-631951-163976-154093-556113-629786-940105-229483-661432, I need confirmation id because my system could not establish a connection with the activation server

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com