Systems supported for TMS 13.2.1 and Release 14

Similar Questions

• Any built-in support for cursors on the graph and trend curves

  Hello

  I went through the documentation to verify that no support exists to draw trend lines and using the slider on the axis (bargraph) but could not find anything related to it. Can you please confirm if there is any built-in support for cursors/trend lines in the component ojchart (bar graph) of the current version of JET.

  Thank you

  Subhash

  Hi Adoni,

  Due to the large number of possible algorithms, we do not provide built in calculation for trend lines. Our goal is rather to ensure that the user can display trend lines what they calculated, with the right amount of interactivity support. We have a very basic demo of this feature in the Cookbook: Oracle JET - graphics - Custom graphics: trendline. In this demonstration, we recommend using reference objects, rather than additional series, because the objects of reference do not allow a user to interact with the individual points or use features such as selection or drilling, which would be undesirable for a trend line.

  On the second question, could you give more details on this cursor you are referring? We have two ways to use our zoom and scroll feature:

  • Preview: Oracle JET - graph - Zoom & scroll: the time axis
  • Simple scrollbar: Oracle JET - graph - Zoom & scroll: categorical axis

  Thank you

  Hugh

• everyone knows the operating systems supported for view 4.5 Server (composer and connection broker)

  the broker to view connections 4.1 isn't able to run on windows server 2008 and R2.

  the view composer 4.1 (2.x) does not run on a Server 2008 R2 as it is supported only on OSes x32bit or Server 2008 X 64. (Yes, know hacks fixs it, but it's still not supported)

  Does anyone know if versjons the broker for the connections and composer v4.5 can run om Windows server 2008 R2 or 2008?

  Guess the composer runs om X 64 for Vsphere 4.1 is x 64 only?

  see you soon,

  Frode.

  I can tell you that the composer can run on X 64 because it is the only way to install vCenter now and that the connection brokers can be 2008 R2.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Operating systems supported for view connection Server 5.0

  We have updated our current connection to 5.0 servers, but they run on Windows 2003 (64-bit). 5.0 view documentation indicates that the login Server 5.0 view must run on Windows 2003 R2 (32-bit) or Windows 2008 R2 (64-bit).

  See http://pubs.vmware.com/view-50/index.jsp?topic=/com.vmware.view.installation.doc/GUID-37D39B4F-5870-4188-8B11-B6C41AE9133C.html

  Our current connection servers are working fine on Windows 2003 (64-bit), so I wonder if the documentation is correct. I think that its more likely that Version 5.0 require a x 64 Windows.

  Connection to the server may run on other variants of the OS, but you only need to run it on one of the supported operating systems.

  Also note that for the PCoIP gateway features, the connection to the server or Security Server must be running that Server 2008 R2 64-bit.

  Mark

• Photosmart: Called tech support for help with my printer and got a sales pitch

  I called HP customer service today to get help with my wireless printer because it won't print wireless. What I got was a sales pitch to buy a value of $450 of virus protection! So very disappointed!

  Hello
  
  Thank you for using the HP forum.

  How can we help with your wireless?

  Have you tried the following:
  
  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem
  
  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926 & h_lang = on & h_client = s-h-E016-1 & h_keyword = DG - PDU
  
  Hope that helps.

• file system support for ASM with NAS?

  Can someone tell me the management system of files for ASM with NAS?

  Thank you

  How To Create ASM starts using NFS/NAS files? (Doc ID 731775.1)

  http://docs.Oracle.com/CD/E11882_01/install.112/e17212/storage.htm#CWLIN291

• Windows 2008 R2 as operating system supported for vCenter Server?

  Hi you all, experts

  In http://www.VMware.com/PDF/vSphere4/R40/vsp_compatibility_matrix.PDF it says that Windows 2008 R2 is supported as the operating system on the server vCenter.

  In http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1022137 R2 is not mentioned.

  Then...

  Is R2 platform support?

  I read the correct documentation that SQL 2008 Express is NOT supported as vCenter database?

  Are questions about wheter it works - it is questions about knowledge if it is supported.

  Concerning

  André

  Hello.

  In http://www.vmware.com/pdf/vsphere4/r40/vsp_compatibility_matrix.pdf , it says that Windows 2008 R2 is supported as the operating system on the server vCenter Server.

  R2 is not mentioned in http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1022137 .

  Then...

  Is R2 platform support?

  What is listed in the compatibility matrix is correct, then Yes.

  I read the correct documentation that SQL 2008 Express is NOT supported as vCenter database?

  Yes.  Use you it as a database, or just use the SQL SERVER 2005 Express that comes with vCenter?

  Good luck!

• Operating system support for installed components

  vmware view agent can be installed in Windows Server 2003.

  IM reading the View Manager Administration Guide and say that view agent can be installed in virtual and physical

  • Windows Server 2003 R2 Enterprise Terminal Server

  • Windows Server 2003 Enterprise Server Terminal Server SP2

  but I don't really understand, I should have set up the role of the server terminal server?

  Thank you

  You add the Terminal Server server role and install the agent.

  In this way, you can add a pool of Terminal Server Services in the display manager and connect to a TS session through the view manager.

  You will NOT be able to use Windows Server 2003 as a virtual office. This only works with Windows XP, Vista and Win7.

  Best regards

  Linjo

  If you find this information useful, please give points to "correct" or "useful".

• Can not find Workstation 11 documents that specify host for Linux operating system support

  I had all the versions of the workstation since version 3 or 4, and in all cases, Workstation ran on a Linux OS support.  For now, I have both Debian and Red Hat Linux workstations and prefer to stay with Red Hat for my work of VMware Workstation. However I find no actual docs for workstation 11 who tell me what rev of Red Hat Linux is supported. Also, I don't see the real support as available contracts more. Once upon a time, you could buy support workstation. I already have systems of vSphere 5.5 to work and they have full support, but I can't support 7 x 24 production on my computer it seems. in any case, what is the actual supported Red Hat Linux tricks? 6.6 worm or am I stuck goes Red Hat 7?

  Thanks to anyone who really knows.

  response to me here:

  After a bunch of research, I get to a page that tells me to get the compatibility guide:

  VMware Workstation 11 Documentation Centre

  Who gets finally me:

  http://www.VMware.com/resources/compatibility/search.php

  Which is useless for workstation because it lists only the products of ESXi.

  Always to research... and I get this:

  http://www.VMware.com/resources/compatibility/search.php?deviceCategory=software

  Nope... It does not help... I select "Host OS" and is told to go elsewhere:

  The host operating system compatibility information has been moved to the following location:

  
  

  http://KB.VMware.com/kb/2100429

  
  

  Host operating system support information (2100429)

  Goal

  Supported host operating system data are removed from the Compatibility Guide VMware (VCG) to other articles of the basis of knowledge (KBs).
  This article KB then told me to go somewhere else to:
  VMware KB: Supported hosts for VMware Workstation operating systems

  Operating systems supported for VMware Workstation guests (2088579)

  your da!
  The answer is that 11 workstations is supported on some types of Linux and the most notable are:
  Red Hat Enterprise Linux 5.10
  Red Hat Enterprise Linux 6.5
  Red Hat Enterprise Linux 7.0 (note: 7 RHEL is horrible)
  The answer is therefore a flat NO WAY for Debian or one of its close brothers.  Strictly big business Linux here.
  Nice hide details in seventeen deep research.

• Is an operating system that is supported for installing vCenter W2008

  W2008 is an operating system supported for installing vCenter I looked through the documentation and I see is that W2003 is supported as an OS for vCenter. I have a client who says that VMware has told them that W2008 is supported with vCenter in the form of OS install.  Does anyone under W2008 vCenter?

  Thank you

  Savoy6

  No. 2008 is not supported for vCenter

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Support for MVC6 and EF7

  Is there any support for ASP.NET MVC 6 and EF7 Oracle? Docs or samples available?

  Thank you

  Oracle does not yet support EF7.

• Pavilion g6-1050-st: no support for my product?

  Hello.

  I tried to configure my laptop so I can use the switchable graphics feature since I was 2 GPU. My Catalyst Control Center UI does not show this feature. I've tried 5 or 6 different guides to solve this problem, but no success. I came to the conclusion that I need to upgrade my GPU of HP website drivers, that I can't find.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-1000-Notebook-PC-series/5046257/model...

  No GPU driver? Why is this and where to find them?

  Next part of my question, I tried upgrading the BIOS with update the link, don't still no dynamic-fixed choice given. I tried to download the older AMD drivers, still no switchable graphics in CCC. What should I do to see this feature?

  Thank you.

  Edit: My (g6 1050st) product is not in this list, given in sticky thread:

  http://support.HP.com/tr-TR/document/c02948560

  So I did not date this driver BIOS, I updated one given in my product page. But I have used graphics switchable back in Windows 7. So what can be my problem?

  Hi there @Onat

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand you are trying to get switchable graphics with your current configuration. I'm happy to help you with this.

  Check the product page, it seems that Windows 8.1 is not among the operating systems supported for this laptop. There are a few pilots of Windows 8, but as you say it's not for graphics cards. As for the BIOS, when it comes to laptops and laptop computers, it is common to lock certain options available on desktop computers, because they can cause serious problems with heat and performance on a laptop. Dynamic mode is one of the people often locked and switchable graphics, fixed - function is controlled by the system, as is the video memory available.

  The lack of a custom driver, your best option may be to go back to Windows 7, use the one for her. What follows is the driver which includes two graphics processors for Windows 7.

  AMD HD graphics driver

  I hope this helps. If you have any other questions let me know.

• Support for Windows XP x 64 for NiDAQmx PCI-6601?

  We use the PCI-6601 with Windows XP x 86 and we want to move to Windows XP x 64.

  I have notced the discussion on this forum:

  http://forums.NI.com/NI/board/message?board.ID=250&requireLogin=false&thread.ID=20698

  Are there updates on support for XP x 64? The latest version of the software only supports Vista x 64 so far, and we are unable to use it for our application.

  Thank you.

  Erik

  Hello Erik,.

  Please use the support NEITHER.  From now on, we still have no support for Windows XP x 64, and due to the massive amount of Windows users from XP to Vista and beyond it is doubtful that we will in the future have the support for XP x 64.  From now on, your best bet is to stick with your current operating system, or if you need to move to 64-bit then, as you have already mentioned, we manage Vista x 64.  I hope this helps.

  Kind regards

• Windows 7 freezes for the right click devices and printers don't is not loading

  I support for a local photography studio and built all of their computers. One of their photo editing machines faced some weird problems I can't solve.

  It is currently running Windows 7 Ultimate 64 bit. About two months ago the mainly the user complained that a right-click on a folder or a file on the desktop would cause the computer to freeze. She also noted that devices and printers would not have been responsible. We finally just did a clean install of Windows, and that seemed to fix the problem...

  .. .for a while.

  About two weeks, the same two problems returned, now it is intermittent. The user declares every morning, she has him restart the computer several times, but then everything works very well for the rest of the day. But while it comes in the next morning, and it does the same thing.

  I tried manually reset the BIOs, turn on Bluetooth Services (even if that computer does not all bluetooth devices) and play with Windows registry a bit, but because the problem is not compliant, it is very difficult to solve.

  I don't know if it's a hardware or a Windows problem. All the tracks would be greatly appreciated!

  Check the report viewer for all errors that occur.

  Clean boot the PC and redo the test

  Run a memory test and a test HD

• OEDQ support for the AV tools

  Hello

  Please someone let me know tools of support for OEDQ AV except Loqate and QAS.

  Thanks in advance.

  Concerning

  Deborah

  External web services call is usually to the Disqualification by using a Script Processor (to where the script used depends on the web service interface). Note that the Script processor is limited to a single output, so normally, if multiple attributes are returned, they are returned in a table attribute, then split later. If you need to do something more advanced than this, you will need to write a new processor in Disqualification - we can tell you this if necessary.

  It is easier to illustrate the approach of Script for example.

  Here is an example of a legend to a code search service postal sample of GeoNames.org. It is a Script processor that takes three inputs (zip code and the country of the attributes of string and a number of maxresults attribute). It returns the results in a table.

  addLibrary ("http");

  Function GetValue (content, name) {}

  var value = "";

  startPos = content.indexOf ("<" +="" name="" +="" "="">") var;

  If (startPos >-1) {}

  endPos var = content.indexOf ("", startPos);

  value = content.substring (startPos + name.length + 2, endPos);

  }

  Returns the value;

  }

  function GetCDATAValue (content, name) {}

  var value = GetValue (content, name);

  If (value.indexOf ("))

  return value.substr (9, value.length - 12);

  on the other

  Returns the value;

  }

  try {}

  var result = new Array();

  var url = "http://api.geonames.org/postalCodeSearch?postalcode=" + input1 [0] + '& country =' + input1 [1] + '& LignesMax =' + input1 [2] + "& username = demo;

  var xmlHttp = new XMLHttpRequest();

  XMLHTTP.open("get",URL,true) ("GET", url, false);

  xmlHttp.send ();

  var response = "' + xmlHttp.responseXML;

  startPos = response.indexOf var (" ");

  while (startPos > -1) {

  var endPos = response.indexOf(" ", startPos);

  var record = response.substring (startPos, endPos);

  var postalcode = GetValue (record, 'postal code');

  var name = GetValue (record, "name");

  var countryCode = GetValue (record, 'postal code');

  var lat = GetValue (record, "lat");

  var lng = GetValue (file, "lng");

  var adminCode1 = GetValue (record, "adminCode1");

  var adminName1 = GetValue (record, "adminName1");

  var adminCode2 = GetValue (record, "adminCode2");

  var adminName2 = GetValue (record, "adminName2");

  var adminCode3 = GetValue (record, "adminCode3");

  var adminName3 = GetValue (record, "adminName3");

  result [result. Length] = zip + "|" +.

  name + "" + |

  Country code + "|" +.

  LAT + ' | ' +.

  LNG + "|" +.

  adminCode1 + "|" +.

  adminName1 + "|" +.

  adminCode2 + "|" +.

  adminName2 + "|" +.

  adminCode3 + "|" +.

  adminName3;

  startPos = response.indexOf var (')", endPos);

  }

  } catch (e) {

  result[result.length] = "Error: " + e.toString();

  }

  output1 = result;