Sytem Hang

Similar Questions

• How do you fix C:\Windows\system32\DNSAPI.dll is not a valid windows image. etc? __

  After a new installation or a repair of xp pro sp3, everything works fine, until I have download 57 updates. On reboot, the message, and then sytem hangs.

  The recent update of KB2509553 contained a new file dnsapi.dll (and other things) that patched a hole that "could allow remote code execution" on your system.

  If you have symptoms lists these:

  Lsass.exe - Unable to locate component
  This application has failed to start because DNSAPI.dll is not found.  Reinstalling the application may fix this problem.

  Lsass.exe - bad Image
  The application or DLL C:\WINDOWS\system32\DNSAPI.dll is not a valid Windows image.  Please check this against your installation diskette.

  .. .it sounds like the update or of parts of it has failed.

  If you copied into an older file, your system may then start OK, but part of the security update is missing.

  I don't know if that is considered to be a "fix" or not... but you can get free help/support for the update using the details in the KB page.

  Maybe here Microsoft support engineers know how to solve this problem too (I asked last week).

  Tip: There is nothing wrong with the update - the problem is a problem on the system that does not have the update installs successfully.

  Solve this problem and the update will install correctly and you'll have security installed was last updated.

• Hanging of sytem and not display when using internet on chrome

  When I switch between tabs in the web browser google chrome, my system is getting hanged and giving no display in my monitor but still the CPU is running. I use the windows 7 ultimate 32 bit operating system in order to find a solution to this problem I recently formatted my c drive and installed the new copy of windows and monitored my gel of processor and the heat sink. There is no problem with him. But the problem is still not resolved... The problem is high, especially when I am browsing internet...

  Hello

  Thanks for choosing Microsoft Community.

  Because Google Chrome is not a Microsoft Product, it is a product of Google; they have a team that dominates the problems with Google Chrome.

  You can contact them for assistance.

  Here is the link:

  http://support.Google.com/chrome/?hl=en

  Hope this information helps. Response for assistance. We are happy to help you.

• Computer HP laptop sometimes hangs at startup, op Vista sytem

  I have a problem... when I start myy comp. it sometimes freezes after hp logo, when I manually turn it off and restart it, it will usually normally then. but this freeze won't happen very often maybe 1 x per 3 startups... Please answer me its very annoying... Please helpp me I am very grateful then...

  @metsat6ll,.

  Hello

  Check this document from HP.

• While surfing or reading e-mails sytem lock up completely

  original title: computer hangs

  While surfing or reading e-mails sytem block completely, also sreen lock up then goes black and resume function, if it hangs completely I have to turn off and restart I ran a diagnosis it came back ok?

  Hello

  ·         What operating system do you use?

  ·         What version of internet explore do you use?

  ·         What mail client do you use?

  ·         What happens when you try to open internet explorer? You get the error message?

  ·         Since when are you facing this problem?

  Method 1:

  I suggest you follow the steps in troubleshooting section below and check if it helps

  Internet Explorer does not start or stops responding

  http://support.Microsoft.com/kb/926449

  Method 2:

  It may be that a third-party application is causing this issue. Put the system at boot. Follow the steps mentioned in the article given below to configure the system to boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135     

  Note: Once you have finished installing, follow step 7 article to start on normal startup.

  Method 3:

  Perform an optimization of Internet Explorer on your computer from the provided article.

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Warning: resetting the Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  Hope this helps,

• Windows 7 black screen with the cursor hangs

  Hello
  Windows 7 downloaded automatically updated and now what pc (sony vioa) starts going menu with 1. Repair Windows or 2. Start as usual.  Neither option works and the screen goes black, cursor appears after about 2 min and then the pc hangs (does nothing).  I can't start the repair or recover it and can seem to do anything at all. Sytem same disk does not start.
  Help please!

  Ian - mi,
  If you are not able to start with an option among the Advanced startup options.  Then you must see if you are able to start with the support of recovery (dvd or disk partition) supplied with the PC.  You can try the options of repair first, since the recovery media.  If those who do not help then you will need to re - install.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Time Machine hangs on the Application file that I deleted

  Hello:

  I'm doing a new installation on my parents computer because Flash Player was completely broken somehow. I can't uninstall or update.

  This isn't my problem right away well. Their backup disk was on his last breath so that I had to get a new and Time Machine hangs first various office applications, which I excluded, now it's of iDVD. I tried that it excludes everything first, but Time Machine has always tried to save. Given that my parents don't use it and it is no longer supported then I thought to uninstall. I deleted the program and demand corresponding is support the file and did a search in the Finder for all of the remaining files. No, zip.

  However, Time machine is still backing up files which I can't find for the life of me. He would make iDVD themes 1, 2, 3, etc. I can't exclude in Time Machine because he's not here. I deleted the partial backups each time and it keeps immediately suspended 19,25 GB on iDVD.

  Please, Please help. I spent a ridiculous amount of time is already and should just get this done.

  I look forward to all points of view.

  Thank you

  Justin

  Edit: misspelling.

  Try re-indexing of Spotlight.

  Spotlight - re - index

  Start with A4 in the 1st article linked.

  Troubleshooting of Time Machine

  Solving the problems of Time Machine

  Troubleshooting backup problems

• iPad 2 Air: icloud drive hangs in "upgrade".

  Hello

  My icloud drive hangs in the upgrade. When I try to save it gives about 30% and stops.

  I tried to access my icould drive via iCloud.com and he says that there is an error.

  I have installed IOS 10.

  can anyone help?

  Try either a restart - restart your iPhone, iPad or iPod touch - Apple Support or if it does not, perhaps signing of iCloud, wait a few minutes, then reconnect.

• Sierra mail hangs up

  I loaded the operating system of the Sierra and the problem I have is that on the startup of mail, I get the upgrade mail screen and just, it hangs and does not open a message window.  However I have another user installed on my machine, and this account has had no problems with the upgrade of the e-mail and mail opening and loading of the old and new emails.  This second account was much less old messages.  I suspect that my mail in my e-mail account data is corrupted.  It is not clear to me how I can reload mail data time machine other than the whole system of return back to before the new operating system is loaded.  A suggestions?

  Hello iron Geezer.

  If I understand your message right, whenever you open mail in your user account on your Mac, you're stuck in a screen to upgrade and never actually need you in your Inbox. I know how important it is to have the Mail app works fine on your Mac, so I'm happy to help you to get to the bottom of this.

  What I would recommend to do first is to restart your Mac, by logging in to your user account and then hold the SHIFT key while you click on the e-mail application. Now keep shift key until it opens Mail. This will cause the Mail to open without boxes to specific letters or messages to open. Give Mail some loading time to see if the problem persists.

  If you want to try the restoration of boxes to letters with Time Machine, the steps detailed here: use Time Machine to back up or restore your Mac to view your messages in Time Machine, you'll need to have the app open to the time that you Mail brought into Time Machine.

  Then you can try to start in safe mode to delete some system-level caches and check and if necessary repair disk. Once you log in safe mode, reboot normally and test the issue again.

  Try safe mode if your Mac does not end commissioning
  

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  If you continue to have problems with your e-mail application, the next thing that I recommend is reinstall macOS so Mail gets reloaded. It won't have to erase all the data on your Mac. You can find the steps on how to reinstall listed under the "If you're reinstalling for other reasons" section of How to reinstall Mac OS , you can skip step 2 in this article since you won't be wiping your drive first.

  Thank you for using communities of Apple Support.

  Take care.

• iMac hangs at startup

  I left my turned on iMac when I left for a short trip.  Back home he went to a gray screen, I recall.  No pressure key keyboard would go to the desktop.  I finally gave up and used the power button to turn off and then turn it back on.  It goes to the screen to logon with the Apple logo and progress below bar.  But beer progress hangs up to halfway.  Nothing ever happens after that, even after hours.  What should I do to start?

  Reinstall OS X without erasing the drive

  Do not forget to backup before.

  1. Restart the computer and after the chime hold down the command and R until the Utility Menu appears.
  2. Choose disk utility from the Utility Menu and click on the continue button.
  3. Disk utility charges and select layouts withdrawal (usually Macintosh HD) the list entry side.  Click the first aid tab, and then click the repair disk button. If disk utility reports any errors that have been corrected, then again run repair disc until no errors are reported. If no errors are reported, click repair permissions .
  4. Once the process is complete, quit disk utility and re-enter the Utility Menu.
  5. Select reinstall OS X and click on the continue button.

• Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also used faster then the previous version.

  Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also faster, then the previous version, use 6s with 64 GB

  Hello naqvi65,

  I see that you have several problems with your iPhone after updating to the latest version of iOS. These issues include problems of performance, inability to find contacts at a Spotlight search, problems with enforcement camera freeze after the launch and the battery discharge more quickly than what you are accustomed. I want to help you find a solution for these questions!

  To answer your questions with performance and your inability to find contacts, we will try to restart your iPhone first to see if the problems persist. Take a look at this resource for more information:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Take a look at this Web site using your photo app troubleshooting:
  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  To keep an eye on your battery use, take a look at the information here:
  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To help maximize your battery performance, this site has some good tips for iOS devices:
  Batteries - maximize Performance - Apple

  See you soon!

• Full screen does not work after upgrade; OSX hangs

  Immediately after the upgrade later El Capitan in Sierra, full function display has stopped working at the end of a disastrous. Not only can I not enter or exit the mode full screen on any application (Safari, iBooks, Terminal, etc.), but in addition, I can't event begin any application which was mode full screen before upgrade (essentially all other applications that I use on my mac). Nor can I drag-finger-three to any application full screen. OSX just hangs and displays the login screen as it has not started.

  Indeed, my mac is useless now, I can't do anything with it. I tried to restart the PRAM, has tried to repair my disk, tried various 'normal' things, which none worked. Can someone help me with this?

  Hello konkere,.
  Thank you for using communities of Apple Support.

  If I understand your message that after upgrade to macOS Sierra as your MacBook Pro doesn't work well for you. I know how it is important for your MacBook Pro to be in place and functional after the software update. Reset the PRAM and repair the disk are key steps in troubleshooting. I also recommend reinstall macOS Sierra of OS X Recovery.

  How to reinstall OS X
  

  OS X can be installed on the same version or an earlier version of Mac OS X, without deleting your data. You don't need to remove or disable the existing system first.

  1. Start of OS X Recovery now command-r immediately after start-up or that you restart your Mac. Release the keys when you see the Apple logo. Start-up is finished when you see the OS X Utilities window.
  2. If you do not want to wipe your drive before reinstalling OS X, open utility disk in OS X Utilities window, then use disk utility to erase the drive. Quit disk utility when done.
     Erase the disc is not necessary unless you're your Mac transfer to a new owner, partitioning your drive for use with Boot Camp, or attempt to solve a problem this as disk utility can't repair.
  3. Choose to reinstall OS X OS X Utilities window, and then follow the instructions on the screen.
     This installs the latest version of Mac OS X, which has already been installed on your Mac.

  Best regards.

• How can I stop my sync to hang out at "preparing to copy items?

  I have a 6 iPhone with IOS 10 and the latest version of iTunes.  I tried to reset the iPhone and reinstallation of iTunes.  I also tried to sync an old iPhone (also with IOS 10) and he hooked when copying updated apps and never completed the synchronization. Synchronization with my 6s actually ends and I can start another sync. Sync again, however, is never really started and it crashes.  If I unplug the iPhone and plug it back, the same problem occurs.

  Hello Jaegerin0,
  Thank you for using communities of Apple Support.

  If I understand your message when you sync your iPhone with iTunes that both hang at different points of the synchronization. I know how it is important for both your iPhone to sync correctly and completely for you. I recommend to use the steps in the following article to help resolve this problem:

  If iTunes does not respond when you connect a device iOS

  Best regards.

• iPhone 7 seems to hang and the buttons do not work

  My new iPhone 7 seems to hang at any time and any of these options to re - start the job. The buttons do not respond. does anyone else have this problem?

  MY iPhone 7 has low this three times in the last 2 days. None of the buttons will respond.  The screen works fine and I can text and use the camera, but when I push the home button, while the Taptic feedback works, nothing happens.  The locking button and volume do not work either. The only thing I can do is a hard reset.

• Bootcamp for Windows 10 update hangs on the Logo

  Hi all!

  I am trying to install a functional copy of Windows 10 in Bootcamp on my Mac Mini. The problem is that when I try to upgrade Windows 8.1, it hangs of process to her halfway through to Windows logo through the process and did not move for days. I tried three times.

  I would like to do a fresh install, except that I need to boot from Windows 8.1 so it will recognize my key (upgrade through https://www.microsoft.com/en-us/accessibility/windows10upgrade)

  OSX has been anything to date before starting the process. Any idea what I can do to prevent this?

  Thank you!

  What year is the Mini?

  Your Mini is listed use 8.1 Windows on your Mac with Boot Camp - Apple Support .