T400 does not start

Similar Questions

• T400s does not start after cleaning the keyboard

  Hello. I cleaned by T400s keyboard today after a few juice reaches the keys and the laptop does not start anymore. I removed the battery and the power cord, tried to deceive the 10 times, press the power button / stop, no still no results.

  Reset the CMOS does solve the problem?

  At first glance it seems that the laptop is powered LED fingerprint reader is turned on, but it turns off as soon as I unplug the charger.

  Any suggestions? Thanks in advance.

  This probably means that your keyboard is dead and need a replacement, which is pretty cheap from ebay.

• T400 does not start after the first display screen

  What is going on? I have wss to work today and my computer shut down due to the low batt. I got home and plugged in and waited a few minutes and turned on. When I checked swipe my fingerprint, all that I saw the first startup screen told me I want to interrupt normal off set up that I can close the button think vantage. It is stuck there. I can activate it on and but it does not start after that screen. What can I do? I am in the middle of the drafting of the report and cannot access my docs!

  I looked the problem and found that have been in contact with the usb pins! Yay the prob is fixed!

• ThinkPad T400 does not start, is turn on below the screen & turning HDD switch off in a loop

  I put my Thinkpad T400 hibernation, but the next morning I couldn't start. When I press the power button, the lights under the screen turn on and I hear the sound of the hard drive and get it out. I don't even see anything on the screen. It is only black. The process continues to repeat in a loop, except if I press the power button to turn off.

  I tried the static load, remove the thing.

  I also removed the hard drive, put it back again, but not working anymore.

  Help, please.

  Solved the problem myself.

  Removed the internal battery and reinstalled after 30 s.

  It worked perfectly. Typing of him now.

• My ThinkPad T400 does not start!

  Honestly, I have no idea what could have caused this!

  I turned it on this morning & it was stuck on the startup screen. It read "ThinkPad" in big letters followed "To interrupt normal startup upward, press the blue ThinkVantage button." Waited about half an hour for him to start & it never did. Of course I pressed the ThinkVantage button & to my dismay... nothing happened. Subsequently, I have unplugged it & removed the battery. I then plugged it back in & tried to start again. Once again, nothing. I unplugged it new & attached to the battery. At this point, I tried to go back to the top and N O T H I N G!

  What should I do?

  Take a look at your usb ports, there could be some sort of pins to touch, as a result of the damaged usb pins.

  ADMIN Edit - link to related in our forum KB Advanced

• Siri does not start under macOS Sierra

  I've recently updated to macOS Sierra (public version) and everything seems fine, except for allowing to Siri. I tried to enable the system preferences as well as execution of the Siri application in the application. I even tried to 'facilitation' by selecting in the menu bar.

  In any case it does not start. Upon activation in system preferences, I get "There was an error in the preferences of Siri." and it takes back me to the main view of system preferences.

  Y at - he of the log files that I should be reviewed to determine the cause of this problem?

  Thank you

  Steve

  Same thing here on a MacBook Pro (13 inch, late 2011)

• Black MacBook does not start

  I have a 10 year old black Macbook, which does not start when a battery is installed.  If it is connected without battery installed, it lights up, but if there is a battery in it, even if it is plugged in, it will get the startup sound and the screen of the Apple gray, then turn off.  I got a new battery and charge it where the charger turned green, but the results are the same.

  Any suggestions?

  It is difficult to say what is happening with this machine, since the time and wear are considerations. I don't know what version of the operating system that you use, but there is a sequence of things you should do - in order of severity.

  http://www.howtogeek.com/217158/what-to-do-when-your-Mac-won ' t-start-up.

• iPhone hot 5s fees and does not start

  phone is connected to the load.  After a while I checked it and it was very hot.  I unplugged it and now it does not start.

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data.

  More troubleshooting can be found in this article:

  If your iPhone, iPad, doesn't respond or won't turn on - Apple Support

• iMac does not start after the last security update

  Hello

  After the last update my iMac (late 2009, El Capitan) does not start.

  The iMac starts he accepts my user and password entry, the loading bar stops at 80% and then nothing happens... after I turn off the iMac. Repeating this procedure change nothing.

  Does anyone have any advice for me?

  THX

  INTELLECTUAL PROPERTY

  a solution that helped me:

  Re: security update causes damaged Apps

• iMac does not start after 10.11.6

  Since the 10.11.6 patch my IMac does not start with my hub plugged.

  Everyone

  I assume you mean a USB hub? What does do when it's plugged in? It starts successfully when the hub is not plugged? If so, I would say that something is wrong with the hub or there is a problem with the port it is plugged or something plugged into the hub.

  Try to plug it into a different USB port on your Mac.

• MacBook Pro does not start

  I have tried several things but the laptop won't start do not. Power cable showing green light as if the laptop is fully charged. It's like the death does not start.

  Try resetting the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  You said "It's like death does not start."

  Does this mean that he shows no signs of life? Indicator light power?

  Hear the carillon?

  Hear the fans?

• The FireFox 42.0.1 application does not start.

  The FireFox 42.0.1 application does not start. I can uninstall and reload FireFox 37.0.2 and that worked, but now when I load 37.0.1 it installs really 42.0.1 that no longer works.
  I had to use IE 10 to contact Mozilla.
  Year annual should be ashamed of this...
  Can you tell me why Mozilla FireFox 42.0.1 installs but won't work?
  In addition, why FireFox 42.0.1 install when I try to install 37.0.2?

  It is possible that your firewall or other security software blocks or limit Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and allow your firewall to ask permission to get access full and unrestricted, again to install for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• Firefox does not start, the Profile Manager is not available

  Firefox worked, then update it does not start. I tried all the fixes; However, the Profile Manager is not accessible or even present in the execution file. I unintalled and reinstalled several times, but I still can't get it to work. There is no Windows or Norton firewall block so I do not understand. What can I do? I want to use Firefox because it's the best browser; but now I'm forced to use Oscar. It's not terrible, but I prefer the features I've had with Firefox

  I had upgraded to the latest version; but the thought of demotion to the version which worked perfectly. In the end, I had to defrag, do a registry clean and optimization of performance of PC, but for the upgrade launched. So, I'm happy to say that I reply to this post with my Firefox browser. Thank you very much for your help. If all goes well, I won't have problems.
  DoubleD52

• My MacBook does not start and fires after the Apple logo. I received this error via FirstAid detail in disk utility.

  Hi Apple/community,

  I need a help.

  What it means? Operation failed! My MacBook Pro does not start. It cuts after the loading screen. What will happen?

  

  Any help will be greatly appreciated. Thank you!

  Well, it seems that your MacBook Pro hard drive has failed and cannot be repaired by disk utility.

  Try to reboot into single user mode: How to start your Mac in single user mode or verbose--Apple Support

  If it works, try to repair the disk with this command:

  fsck -fy

  (http://osxdaily.com/2013/08/07/how-to-repair-a-mac-disk-with-fsck-from-single-us UH-mode /)

• Firefox does not start - claims that it is already open

  Firefox does not start. He claims to be already running, but that doesn't seem to be the case.

  I tried to create a new user profile, but when I try to open Firefox now, the menu "choose user profile". I tried the new profile and they old, and both give the same error message. "Firefox is unable to use the"Default user"profile because it is in use. To continue, close the Runspace of Firefox or choose a different profile. »

  There is an entry for firefox.exe in the menu of "details" to my task manager and nowhere else. When I try to put an end to this task, I get the following error: "the operation could not be performed - access denied."

  Due to some troubleshooting research, I tried to delete the parent.lock my profile folder, but I get this error: "the action cannot be completed because the file is opened in Firefox."

  I tried to transfer my bookmarks and preferences from Firefox to Chrome, but I had a similar error suggesting that Firefox was already open and I have to close first.

  I also turned off my computer and uninstalled and reinstalled Firefox several times.

  I'd really rather not lose all my bookmarks Firefox, modules, and preferences. I also prefer to use Firefox for Chrome, so if anyone can help me I would really appreciate it. I don't know what else to try.

  My PC runs Windows 10, incidentally.

  Try to delete the parent.lock file in the Firefox profile folder.

  • C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  See:

  • http://KB.mozillazine.org/Profile_in_use
  • https://support.Mozilla.org/KB/Firefox+is+already+running+but+is+not+responding

  What security software do you have?

  Try to create a new shortcut on the desktop Firefox and maybe to reinstall Firefox via a clean reinstall (i.e. remove the Firefox program folder).

  If you cannot remove the Firefox program folder and then try to rename this file to "Mozilla Firefox.old".

  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) to see if that helps.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/
  • http://www.7tutorials.com/4-ways-boot-safe-mode-Windows-10