T400 will not recognize Benq monitor through my KVM TRENDnet switch

Similar Questions

• Satellite A500-141 - the CD/DVD drive will not recognize any disk in the status bar

  I watch the DVD yesterday and he played upward halfway through and almost jerky. Ejected and thought no more of him now, the player will not recognize any disc, be it video or sound. I tried a system restore but still the same thing that it is not read disks. Any help appreciated.

  Thanks in advance.

  Hi quietly,

  If your CD/DVD drive doesn't work, how do you have a system restore?

  Is the CD/DVD drive listed in Device Manager correctly or you see a yellow exclamation mark on it?

  Maybe the lens is dirty and must be cleaned with a Microfiber cloth. Open try CD/DVD and try to clean the lens with a clean Microfiber cloth.
  Check this box!

• Satellite L30 will not recognize battery

  Hi guys

  Having a problem with my battery.

  The battery itself is not so old and works in another machine. My current L30 for some reason any will not recognize the battery. When the captain came out of the computer does not use the battery. It sometimes happens with a bright orange at the front as if his load, but he never goes green.

  Other times where the battery icon is in the lower right corner, it has a cross through the battery icon as if it does not exist.
  All ideas

  Remove the battery and connect your laptop to the power running, start Windows and when the OS is fully charged, put the battery in the place again.

  The battery is correctly recognized?

• My windows will not recognize my CD/DVD drive

  My computer crashed recently and since then windows will not recognize my CD/DVD drive. My removable disk (e :)) is there, but I was told that windows cannot access the disk.) Also when I try to eject a developed error warning.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• Try to burn a CD. The system will not recognize the blank disc or let me burn__

  Try to burn a CD. The system will not recognize the blank disc or let me burn... says there is no disc inserted

  Hello

  Have you tried to close all programs and then insert the disc? Restart the 1st and then try it.

  If no joy:

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows 7 will not recognize the dvd drive

  Windows 7 will not recognize the dvd drive, although it worked well for more than two years.  Now I can't access it to install new software.

  It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.

  It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management.  If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?

  What now? Is turn off the power, my only option?  What happens if it is not yet recognized after that?

  Hello

  If the drive is viable:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951

  
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Running Mac Yosemite, will not recognize "DVD bundle" in CS3 download

  I currently own a copy of CS3, and I tried this two ways - using the physical disk and download from the Adobe Web site.  I get to the second part of the installation, and my computer will not recognize the "content" of the disc or the DVD "bundle".  As far as I can see, this only contains html and pdf files.  I went through all folders on this particular disc/download.  I tried hitting 'OK' to continue on my installer because I inserted the disc is pulled up on my download.  It only allows me to move.  I have included several screenshots to better understand my situation. Keep in mind, I use a clean version of Yosemite.  It's on my machine to buy.  What should I do to move forward?  Why my computer will not recognize this content as installable?

  

  

  

  Hello Sarah,.

  Please visit the given link to download help: products CS3 download

  You can also view: could not download CS3 Design Standard

  It will be useful.

  Concerning

  Bianka Attre

• I run a Mac Pro with El Capitan and iMovie 11 will not recognize my camcorder Sony FDR-AX35P 4 K

  I run a Mac Pro with El Capitan. iMovie 11 will not recognize my camcorder Sony FDR-AX45P 4 K. He keeps asking connect a camera.

  iMovie 11 (version 9) supported cameras include not all models Sony FDR.  iMovie 10 supports a number of FDR-AXxx models however does not list your a see particular: iMovie support cameras - Apple Support

  There are a number of problems of running iMovie 11 under El Capitan, particularly with still pictures appears.  (It does not supports video 4K).  I recommend try iMovie 10.1.2 which you should be able to get in for free or may already have in your applications folder.  Although your camera model in particular is still not listed, I would expect it would probably work, and failing that you should be able to read files directly from the SD card if you put in an SD card reader.

  Geoff.

• Windows 7 will not recognize driver for HP Scanjet 5370c scanner

  I was not able to get Windows 7 to recognize the driver for my HP Scanjet scanner on my new HP Pavilion Elite a9200z desktop computer.  I tried to install the original driver delivered with the software that not only failed, but it was necessary to do a system restore to an earlier date.  After downloading the software update and the driver on the HP website (for the XP operating system. (No), the software successfully installed but Device Manager said there is no driver installed.  I tried Udating driver in Device Manager, but none were found on the system.  I'm afraid that because the driver is not signed by HP, this is perhaps the reason that the system will not recognize it.  I do not receive a message about the driver being made and has been disabled.

  Where would the driver have been installed under Windows and what would be the name of the file?  Is it possible to install a driver that has not been signed on Windows 7, even though I know that it comes directly from the manufacturer.  I came on this forum that says HP email support is no longer in effect for this scanner.  Scanner was working fine under Windows XP.  Thank you in advance for any help you can give me.

  Thank you for your response.  I posted the same question to the Board of Directors Microsoft as well.  One of the technicians gave me a link to a website that has software in support of scanners which pilots the manufacturer has not, for some reason, took worth to upgrade to Windows Vista or Windows 7.  I installed Vuescan driver bundled with the program which works perfectly, and my scanner HP Scanjet scanner 5370c is upward and great in Windows 7.  They have a list of more than 100 scanners supported by the program.  So, anyone interested should check the list before you buy the program.  No, the program is not free, but it is much cheaper ($39.95) that pitching on a scanner perfectly ideal of work and having to buy a new one.    Anyway, if anyone is interested in the possibility of using their scanner ' is no longer supported "with Windows 7, the website below might help.

  http://www.Hamrick.com/

• sanDisk SDXC 64 GB 45 M/s will not recognize by satellite Z830

  Hi, who can help?
  sanDisk SDXC 64 GB 45 M/s will not recognize by satellite Z830
  Win 7 home
  I read in the specs: the drive is able to do this.

  Marcius thanks for your response.
  I tried a lot of smaler maps. They are ok.
  In my view, the 45MB per second caused the problem.
  BIOS 1.8 is real
  Ricoh PCIe SDXC/MMC Host Controller name
  PNP-Geratekennung PC VEN_1180 DEV_E823 SUBSYS_00011179 REV_04 4 & 32E69FA8 0 & 00E0
  Treiber windows system32 drivers risdxc64.sys (6 Ko 103,00 (105,472 bytes), 29.01.2012 11:57)
  Thank you
  Dellmann

  This post in line.

• After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10

  After that the last update 12.3.3.17 itunes will not recognize my devices on windows 10

  Have you tried these steps? If iTunes does not your iPad, iPhone or iPod - Apple Support

• I lost my WiFi signal after having placed a time Capsule in the system. Now the Airport Extreme will not recognize the system. Any ideas?

  Any ideas on why my Airport Extreme will not recognize the system after the integration of the time Capsule in my system? Continues to have a flashing yellow light after trying all suggestions of technicians from the Apple Store and Internet provider.

  Since we don't know all what has been tried, we will have to start from the beginning if you don't mind.

  What exact models are your AirPort Extreme and Time Capsule? What is the brand and model of your modem Internet? I'll assume that Extreme is your "main" router and is directly connected to the modem by Ethernet... correct?

  Do you have the Time Capsule (TC) connected to the extreme, by wire or wireless? What is your goal for the TC? In other words, will not be used to extend the reach of the extreme wireless?

• My IMac will not recognize my LENOVO Tablet

  My iMac will not recognize my LENOVO Tablet

  "Will not recognize" it what, exactly? What you trying to do? Lenovo say when you contacted and reported the problem?

• Satellite Pro L10 - USB port will not recognize devices

  Hello

  I got a L10 for 18 months. Under the guarantee, I got a replacement motherboard mounted. Everything has been ok so far. A USB port will not recognize devices, a port is ok, but randomly turns off a device attached to it and comes up with the message "USB device not recognized". The third port is ok all the time.

  Any solutions or suggestions?

  Post edited by: caddy

  I guess there is not enough power on the USB ports and external devices may not work correctly. It is not easy to say why this happens, but there may be a problem of welding.

  I recommend you contact the service again as soon as possible.

• Time capsule will not recognize the backup from another mac

  Time machine will not recognize the backup from another mac

  Time Machine will never find "another" Mac backups unless you've been backup that 'different' Mac on the same Capsule you have there.

  So, we need more information and to try to understand what it is that you are trying to accomplish. Please assume that we know nothing about what you could have done in the past... (since we don't have).