Running Mac Yosemite, will not recognize "DVD bundle" in CS3 download

Similar Questions

• Need dvd rom to install, computer will not recognize dvd rom.

  I'm doing a clean install of windows 7 on my laptop. The old onehard drive is totally dead so im from new. Once I have spend assigning U.S. and English at all, it says that I need to install a driver for the DVD burner in order to move forward. It will not find the driver, or make a list of your choice. Can I use a dvd - rom external USB? It will be same which recognizes? Don't want to lose $50 for nothing.

  I'm doing a clean install of windows 7 on my laptop. The old onehard drive is totally dead so im from new. Once I have spend assigning U.S. and English at all, it says that I need to install a driver for the DVD burner in order to move forward. It will not find the driver, or make a list of your choice.

  Can I use a dvd - rom external USB? It will be same which recognizes? Don't want to lose $50 for nothing.

  Yes, it should work, you will need to set it up in the BIOS so.

  Another option is to create a bootable USB key with the installation files.

• Sony DVD + RW DW-Q58A Drive will not recognize DVD movies

  I've upgraded windows xp to windows 7. I have a Sony DVD + RW DW-Q58A drive.  It works very well for reading, writing etc... But won't recognize DVD.  Bought films or movies burned.  Occasionally, he will recognize an and he is hit and weather it's a bought movie or a film engraved... Help?

  There are 2 lasers in a Dvd Drive, a CD and a DVD. I'm guessing that the DVD laser has gone wrong. This is common with older players like yours.

  You can try to uninstall the IDE channel that the unit is in the Device Manager and reboot, but I doubt it will help.

• HP Envy 4500: Mac running El Capitan will not recognize the HP Envy 4500 printer more

  Last week I was able to print to my HP Envy 4500 to my MacBook Air and MacBook Pro, both running El Capitan.  However, when I went to print today, no computer cannot find my printer.

  I tried everything I found on these forums of discussion... the network reset, feeding all turned off, turning off iPv6, etc. anything.

  I have a USB cord used to print today and when I went in the connected USB printer utility, I could select Configure the wireless, but again, make the message: not accessible device.  It notes the wireless network, the settings were downloaded successfully on my device, however, your Mac could not locate the device on the network.   My Mac is both connected to the same wireless network.

  Help!

  Hello

  I restart your Mac and try the above steps again - if it does not prove successful, I then reboot your router and repeat the steps.

• Media Player or Media Center will not recognize DVDs, but will play CD

  I've had my laptop for about a year now. The media play would play a DVD without problem. Up to what a month ago I noticed that it would take more time and more time for the Media Player play a DVD. I can't have the media to listen to anything except a CD. I noticed a rattling when I inserted the DVD. Now he not only recognise a DVD, but when I insert a DVD, nothing will happen. I tried uninstalling the driver rest nothing is that nothing happens. Do I have to replace the whole player. In Media Center, it lists a DVD as being stored in the library, I the HELP JUST DO NOT KNOW WHAT THE DEVIL IS VA ON?

  ONE WITH A SOLUTION? NEED HELP.

  Hi Roy,

  Welcome to the Microsoft community.

  Apology for a late reply.

  I suggest you TURN the Windows media feature in the list of Windows features in Control Panel. Check the results. Check out the link and follow the steps to do this:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-Media-Center-cannot-detect-DVD-error/6246f256-A272-4450-8F3C-344631773cac

  Please let us know the results.

• Problem with sony dvd +-rw dw - d56a will not recognize DVDs

  Hello:

  I have an Inspiron 9100 with the player above. Everytime I put a dvd it tells me to insert a disk. I'm trying to load a game on dvd, but without success. I ran the Diagnostics and all past. When I insert the game disc and run it I get a message that I need to insert a disc with digital information about IE. a game or something. Can anyone help please. BTW, it runs fine from cd.

  Thanks for the help.

  
  

• HP dv7 will not recognize the second hard drive

  My HP dv7-2185dx running Windows 7 will not recognize the second hard drive, bios recognizes this Intel Rapid storage acknowledges.

  Main hard drive is a 1 to install a second hard drive to 500 GB.

  Hello

  Try the following.

  Judgment of the laptop and unplug the 2nd HARD drive.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  When this is finished, stop the laptop.

  Reconnect the 2nd HARD drive, then start Notepad and let Windows take over completely for a few minutes before checking if the reader appears in the lower part of the disk management window.

  Kind regards

  DP - K

• I run a Mac Pro with El Capitan and iMovie 11 will not recognize my camcorder Sony FDR-AX35P 4 K

  I run a Mac Pro with El Capitan. iMovie 11 will not recognize my camcorder Sony FDR-AX45P 4 K. He keeps asking connect a camera.

  iMovie 11 (version 9) supported cameras include not all models Sony FDR.  iMovie 10 supports a number of FDR-AXxx models however does not list your a see particular: iMovie support cameras - Apple Support

  There are a number of problems of running iMovie 11 under El Capitan, particularly with still pictures appears.  (It does not supports video 4K).  I recommend try iMovie 10.1.2 which you should be able to get in for free or may already have in your applications folder.  Although your camera model in particular is still not listed, I would expect it would probably work, and failing that you should be able to read files directly from the SD card if you put in an SD card reader.

  Geoff.

• Windows 7 will not recognize the dvd drive

  Windows 7 will not recognize the dvd drive, although it worked well for more than two years.  Now I can't access it to install new software.

  It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.

  It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management.  If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?

  What now? Is turn off the power, my only option?  What happens if it is not yet recognized after that?

  Hello

  If the drive is viable:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951

  
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I have Adobe Photoshop elements 10 Costco edition in DISC format.  We have Macs.  However we have updated all the new Macs and do not have DVD drives in them.  I still have the old top Mac desktop that can run Photoshop, but I wan to install it also on my

  I have Adobe Photoshop elements 10 Costco edition in DISC format.  We have Macs.  However we have updated all the new Macs and do not have DVD drives in them.  I still have the old top Mac desktop that can run Photoshop, but I wan to install it also on my laptop.  I have serial numbers.  Where are the instructions to do this?  Thank you.

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• Satellite A500-141 - the CD/DVD drive will not recognize any disk in the status bar

  I watch the DVD yesterday and he played upward halfway through and almost jerky. Ejected and thought no more of him now, the player will not recognize any disc, be it video or sound. I tried a system restore but still the same thing that it is not read disks. Any help appreciated.

  Thanks in advance.

  Hi quietly,

  If your CD/DVD drive doesn't work, how do you have a system restore?

  Is the CD/DVD drive listed in Device Manager correctly or you see a yellow exclamation mark on it?

  Maybe the lens is dirty and must be cleaned with a Microfiber cloth. Open try CD/DVD and try to clean the lens with a clean Microfiber cloth.
  Check this box!

• Time capsule will not recognize the backup from another mac

  Time machine will not recognize the backup from another mac

  Time Machine will never find "another" Mac backups unless you've been backup that 'different' Mac on the same Capsule you have there.

  So, we need more information and to try to understand what it is that you are trying to accomplish. Please assume that we know nothing about what you could have done in the past... (since we don't have).

• my cd player can read cd/DVDs, but will not recognize a cd for copy/writng? Help

  I have 2 drives, both reading and playing, but both say "insert disc" and will not recognize when I insert discs

  try to copy videos from hard disk and trying to copy music from the hard drive.

  suggestions?

  Thank you

  Grant

  The following links may be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Good luck...

• Can my cd-r/dvd will not recognize a blank cd to burn,.

  My cd-r/dvd player will not recognize a blank cd to burn. It will play DVDs and CDs store bought and even burn but when I try to burn one he repeats to me enter a blank cd. that I am using that is empty, I can burn one on my other computer and the game is on a fine, one I have a problem with a dell inspiron 1500.

  Hello Danielbullock29,

  Thank you for your message.  In some cases, the burners will not burn a specific brand or batch of CD/DVD.  Try a different brand and let us know the result.
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My windows will not recognize my CD/DVD drive

  My computer crashed recently and since then windows will not recognize my CD/DVD drive. My removable disk (e :)) is there, but I was told that windows cannot access the disk.) Also when I try to eject a developed error warning.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.