T420: cancelled multi touch screen option?

Similar Questions

• Touch screen not responsive - laptop HP Envy 17-j051ei

  I bought a second hand model, and I can't get the touch screen to work.

  I tried all the standard corrections and remedies on the implementation options.

  There is option no. Human Interface for touch screen.

  Put full Windows Update. HP update drivers. All the updated graphics to date.

  Is it possible there is a model that did not touch screen option installed, as in the screen is not touch?

  I bought it not tested by the seller online

  Any ideas or advice. I can send return it for refund, but prefer the opportunity to remedy

  Thank you

  The HP Envy 17-j015ei laptop model that you bought is not an edition of the touch screen.

  That's why you don't find it shows in Device Manager.

  See the card to the following ADDRESS.

  http://support.HP.com/us-en/document/c03794875

• When the touch screen will be available to customize the ENVY dv6t-7300 Quad Edition

  I am a customer of long date HP and we ordered that several custom laptops as well as we have in our office workstations.  I have 2 laptops, I am ready to replace, the two dv6t for about 3 years and touchscreen offered then.  I don't want a ultrabook.  I'm in the publishing house and a workaholic must plan the most everything.  I've been periodically check since October and still no touch screen option.  I really want to leave HP, but one of the portable won't last much longer is there an eta or that's going to be a possibility?  With Windows 8, it makes no sense, why it is not currently available.  Thank you very much for your help!

  Please do not worry much about it. HP comes with several touch new innovative, capable, high, elegant setting designed and echonomic models. Please look out for all the products and you will certainly love them.

  There are touch screen active portable computers for the launch of HP in the months 1-2.

• Need a virtual keyboard for Photoshop keyboard shortcuts use multi-touch Monitor

  Hello

  I have three monitors. two are vertical and sits on the desk tilted up slightly. The desktop monitor is 10-touch.
  I use it for music and for Corel Painter but especially useless creation for the Photoshop job.

  So my question is: I want to make use of the multi touch screen when working on images.
  What is the best keyboard or the virtual Manager shortcut key that can help my workflow with Photoshop and LightRoom.

  The top on the Surface Pro 3 pen button is blue tooth her can be used via eventghost and ben is also blue tooth so it must be associated with you machine support Bluetooth as a stylus device.  So there must be a support of the device installed in windows.  I don't know if Windows Plug-and-play or blue tooth compatible would install support on a surface not machine for the high need for relative position information display that is calibrated with a windows tablet pen holder.

• Touch Screen chooses options on own HP Photosmart C4680

  Hello

  My HP Photosmart C4680 has a touch screen, which will choose its own options when I turn on the printer.  It 'push buttons' to the different menus, but bottom line, it's gets stuck on a map memory, copy, or scan and then I can connect to my laptop to print because she's busy doing his own selection.  If I try to cancel or to sail with the touch screen it doesn't let me.  I unplugged from the wall and let rest overnight and this still happened. Sometime during the attempts to restart I did the same power kept flashing on and outside.

  Thank you

  TEMPORARY SOLUTION: delete touch screen at a screen, print from the computer. You will need to block the door sensor on the back of the touch screen, plug it back (2 wire ribbons) and delete again each time the printer is turned off or is spent in sleep mode. Better to have all the print jobs in queue upward, and pause, resume when ready. This works for the print mode, but does not allow for analysis.

  STEP 2: Order the capacitor referenced in previous reviews.

• Touch the touch screen moves the cursor appear on another monitor in a multi-monitor for Windows 7 system

  There are three 3 monitors on this system. Two of them are the screens LCD Dell 2407WFP-HC and one is the touchscreen Acer T230H. Dell monitors are connected to a NVIDIA Quadro FX3500 and identify as monitors 1 and 2. The Acer monitor is connected to a NVIDIA GeForce 7600GS and identifies as monitor 3. The system runs Windows 7 Ultimate x 64, with updates. Everything works fine except for the touch screen feature.

  According to the instructions I used the Tablet PC configuration to configure the touch screen. In the installation program, reports monitor 2 Dell incorrectly as having entered touch available and the Acer monitor 3 reports as not having NOT available - also incorrect enter key.

  When I touch the Acer screen, the cursor appears on the monitor Dell 2 and moves according to the movement of my finger on the Acer screen.

  1. Go to the control panel and search for "Touch".
  2. Click on 'The Tablet PC settings'
  3. Click on "Setup"... "right" configure your stylus and touch displays.
  4. Choose "enter." »
  5. Press the 'Enter' key until you see the instructions displayed on your actual touchscreen.  Tap the screen and it will say something like "press ENTER to move to the next step.

  You should now see your contact to events (and mouse) are displayed on the touch screen when you... Well, touch.

  Hope that helps.

• Join Meeting unavailable option and touch screen displays the current meeting.

  Hello

  We had a video-conference in our society, here is the list of endpoints participating in the Conference

  Tandber C60 - TC5.1.3.292001
  Cisco SX20 TP - TC6.3.0.3d8e7d1
  Cisco TP MX 200 - TC6.3.0.3d8e7d1
  Cisco TP MX 300 - TC6.3.0.3d8e7d1

  We have touch panel connected to all the codec above. We noticed that join meeting is sometimes unavailable, and touch screen displays the current meeting.

  Can you please let me know why this problem is intermittent.

  Hi Sandesh,

  If a conference is reserved as booking of TMS, it is expected that the keys 'register' on the endpoints are disabled.

  For more information on how and why reservations from Outlook could be "downgraded" to booking, see page 59 and 60 of the TMSXE Deployment Guide.

  Kind regards
  Kjetil

• Apple Watch with broken touch screen

  Hello, community.

  I bought my 42 mm watch with stainless steel on January 4, 2016. And a few weeks ago I damaged it accidentally. Him came bracelet cancelled and the watch fell to the ground. Thus, the glass is broken. Touch screen works, but the broken glass is too high and can damage the fingers.
  On 7 September, Apple announced a new series of Apple Watch 2.

  Is it now possible to give them my watch, pay with a discount and make a NEW APPLE WATCH Apple Watch 2 series, or new sport? without a bracelet, that a case is necessary.

  Hello

  Apple does not currently offer a program of recovery for Apple Watch, whether in work or damaged condition.

  For compensation for your damaged watch, contact the Apple Support (mail service may be available) or make a booking Genius Bar to establish your available service options, the likely time and cost:

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

  Prices for the United States information service, for example, are available here:

  • https://support.Apple.com/watch/repair/service/pricing

• X 360 spectrum: spectrum x 360 Spec issue - general, keyboard, multi touch pen, RAM max

  1. where is more detailed information on the specifications of the HP laptops? I went to store.hp.com, and the information is not very detailed, at least on the 13 t. What differentiates the 13D dx models? Is there a function to compare to store.hp.com?

  2. what happens to this laptop keyboard screen rotates around the rear? The keyboard is still active? If this isn't the case, at which time he became disabled?

  3. the screen is touch multi touch at least 10 points? What is it?

  4. do this model have a stylus and place to store a stylus?

  5. I can customize to 4 GB or 8 GB of RAM, it is 8 GB of maximum RAM that can be installed in the present? What kind of memory does it take? What is the speed of the bus?

  6 has a SD card slot?

  7 are there of the best photos with, ironically, a 360 degree view so I can see what ports/slots it might have?

  8. What are the specifications of wifi?

  9 there BT?

  10 has an internal WWAN option?

  I love the look of this spectrum x 360 and see it as a possible replacement for my Fujitsu T901 sustainable. But I fear that if the details are also brushed over that I can find, there may be other details, I don't think to check.

  Hello

  1. from time to time, HP may change the options so you should look at these options to see the differences. Whatever it is today is maybe not available/aplicable next week or next month:

  http://store.HP.com/us/en/MDP/laptops/spectre-x360-211501--1

  the following manual will give you more information.

  http://h10032.www1.HP.com/CTG/manual/c04679496.PDF

  Normally the 13 t for a series which can be many models dx

  2 inactive automatically

  3. you can use at least 10 fingers at the same time

  4. you buy pen separately, I know the special leather cover.

  5. you must make the decision when buying, it is not extensible.

  6. Yes

  7. the manual above will show you, but not in color

  8. There are few options, see above

  9. Yes and no, see options

  10 NO.

  Kind regards.

• (Solved) How randomly Multi touch gesture (stroke) to nex/prev tab (it's originally rear)?

  I have the multi touch trackpad. and if I drag with 3 fingers, it is behavior front/rear. but I want to make tab prev/nex. I changed some values about: config and still it unaffected. I am downloading a screen shoot of on config filtered by "gesture."

  https://fbcdn-sphotos-c-a.akamaihd.NET/hphotos-AK-AsH3/734110_10151449162684415_1709914074_n.jpg

  I found out is that my clickpad sends magnetic signals such as alt + arrow so if you change the shortcut next/previous hit tab will do the same think.

• How to temporarily disable the touch screen in Windows 8? TouchSmart 320-1122la

  TouchSmart 320-1122la

  64 bit of Windows 8

  This solution does not work for me because I don't have the option "Use your finger as input device."

  Go to the sounds and then hardware and Control Panel.

  Select the Pen and Touch and go to the contact tab.

  At the top is "Use your finger as input device."  Uncheck the box.

  Click apply and then click OK.

  Is there another solution?

  Thanks in advance.

  Hi, I have a HP TouchSmart 320-1030, so it can work on your TouchSmart:

  1. Press Windows + X logo.
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
  5. Right click and select disable from the list.
  6. Click Yes in the dialog box that asks you if you are sure you want to disable the touch screen driver.

  When you want your touchscreen to work again, follow the above procedure, EXCEPT when right-clicking on the touch screen driver, select enable.

  ~ Lil Liebe

  I'm not an employee of HP; I just want to help.

  Click the White Star of Kudos to say thank you *.

  By clicking 'Accept as Solution' on an answer that solves your problem makes it easier for others to find solutions.

• Jet 7 Tablet 5709: HP Jet 7 touch screen does not work in Windows even if it works in the BIOS menu advanced starup

  Less than two months ago, I upgraded my HP Jet Windows 7 to 10. Over time some questions popped up (random apps that could not be opened, etc.) so I decided to do a full reset, deleting the files from the user. Once the 'install' process is complete he brought me to the initial configuration for Windows 10 screen, asking me my keyboard and language preference. He would not accept any contact entry. I rebooted it and he went to the advanced configuration where I could use the touch screen to do a complete reset. That has not changed anything. I found the info on the HP website and did a reset of the BIOS. That has not changed anything. I got an OTG cable, but was not able to get a keyboard work. I did, however, get a mouse works and has managed to create a new user and login. However, the touchscreen does not work in Windows. I was able to get into the settings and looked at the Device Manager settings. There was only a mouse driver listed under Human Interface. I also noticed a number of question marks in the subtopic of the processor drivers.

  I was able to use the OTG cable to try to re - install Windows 10 from a USB key. When a similar initial settings (language, keyboard) screen broke, I couldn't use the touchscreen. Later, I created a USB with Windows 8.1 thinking he might have a better chance. The same problem. He does not touch inputs. And with a key USB installed via the OTG cable, I can't launch a mouse at the same time.

  It is strange that I have not the problem in the BIOS or advanced startup options. It seems that there is a corruption somewhere, but how do I fix?

  Hello Moronihah,

  You did a clean install (delete all files and programs) the 2nd time you reinstalled Windows 10?

  That's what you need to do first.

  Then, you have to go to the HP website and install the drivers on your USB.

  Above all, you need to include the Goodix Touch Controller Driver and pilot, allowing Malta G-Sensor.

  HP Software and Driver Downloads

  You're using a hub 4 ports with your OTG cable? Which will allow you to use the mouse, the keyboard and the entire USB drive.

  

• Turn on Touch screen Pavilion 23

  I have a Pavilion 23-B219c.    Only had about 2 weeks.   I think that, when I first put in place, there was a question about ENTRY and I chose '' mouse. ''   But now the touchscreen does not work.   How can I activate the touch screen features?  THX.

  Hi RobKes.

  Some models of this machine offers touchscreen. Your manual click here.

  If you are not sure if it is a model to screen touch or not. You can check in the control panel. Press the Windows key + C to open charms, type in the Panel. Open the control panel. Select system and security and open. Select system and open. This screen should tell you if it's a touchscreen or not. If it is not listed as a touchscreen and you chose this option, you can consider to return this model and make one with this option.  If it is a touch screen model and you still do not see the stylus and touch settings. as you suggest it, or that it's just about 3 weeks, it would be in warranty and you can call the HP support, you can be back to Best Buy.  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number. click here. Please let me know the result

• Satellite U920T - touch screen does not

  The touch screen on my U920T satellite does not work from a few days back.
  I can't find all the settings for touch or any (except the touchpad) touchscreen device in Device Manager.

  I'm not sure exaclty when he started to malfunction.
  I installed the 8.1 Windows a few months ago and had a problem with the card wireless at the beginning, but the problem with the touch screen just appeard this week.

  What driver Toshiba control the touch screen?
  Is it a hardware problem or software?

  Hello

  To be honest there is no special driver to control the touch screen.
  The driver is provided by the Windows System.

  I think you should get the laptop back to factory settings but I fear that this will not solve the problem of Mr. smells like a hardware problem because I found some threads here in this forum about the dysfunction of the touch screen and especially the problem could be solved by service agents.

  By the way: before you run the recovery process try to configure the stylus and touch screen.
  Go to the control panel (Windows key + X-> Control Panel)-> Tablet PC setting.
  The first display tab contains options such as configure screen stylus and touchscreen.
  Here, you should be able to start the installation program and identify the touchscreen.
  The first option must contain 1 internal LCD
  At the bottom, you might find button to calibrate and reset the settings for the internal LCD.

• How to disable the touch screen on the Qosmio DX730?

  I want to use the calibrators of color such as colourmunki for my graphic work. These must place me something on the screen.

  How can I temporarily disable the touch screen while I do this?

  I tried Control Panel and manual with no luck.
  Thanks for any help

  Hello

  Have you found a way to do it?
  I think that it of not possible to disable the touch screen.
  Found no information in the user manual. Maybe you can check the BIOS settings available. Switch on and press F2 to enter the BIOS.
  But to be honest, I doubt that a power option would be available there.