T500 WXGA + LCD screen adjustment challenges

Similar Questions

• Brightness not adjustable LCD screen in win7

  I recently had g500s lenovo with 64-bit preloaded windows8

  I got bored of windows8 and retrograde to windows7 home premium 64-bit (a difficult procedure, or said by the way and with your help through the path)

  Windows 7 has worked very well after installing device drivers, with the exception of the brightness of the LCD screen that is unresponsive to any fine-tuning...

  in the windows power management home page, as well as shortcut keyboard, the cursor keys ainsi que les touches de raccourci clavier, le curseur va going either maximum or minimum brightness (no inbetween steps in windows 8 there were > 6 steps)

  in the screen advanced settings, for as long as I set the brightness (for example at 50% on battery, plugged 70%) that does not lead to any change of the brightness almost

  Sorry for the overload and thankx in advance

  http://support.Lenovo.com/en_US/detail.page?docid=HT078787

• Equium P200-178: 17 "lcd screen went funny colors

  My screen 17 "my equium p200-178 went funny colors as if when looking at pictures he is far from a lot of saturation on the screen.
  I plugged an external display and the screen works fine.

  So I'll e need to change the screen.
  I need to know is other laptops or computers laptops 17 "use the same 17.1" WXGA lcd glossy screen is with a backlight ccfl, if so which models? and we know what are the part numbers...

  Thank you

  > If so which models? and we know what are the part numbers...

  I think, you should contact the Asp (SAV) and ask them about compatible lcd screen. Can say that the screen is one of the most expensive parts of the laptop as a motherboard.

• Replace T400 WXGA LCD WXGA +?

  Hello

  I recently bought a T400 with LCD WXGA 14.1 "- I would like to replace it with a screen 14.1" WXGA +.  Someone has he done this before, to know, or know if it is possible?

  Thank you.

  That is right. The absence of specification "LED" indicates that it is in fact a CCFL Backlight Panel.

  If you buy a LCD replacement on fleebay or love it, I strongly suggest that you make your purchase based on replacement of FRU part number.

  Note: If you replace the LCD screen, you will cancel your warranty. Always keep this in mind.

• Satellite PRO U500 - LCD screen size is reduced

  Hi all,

  I have a Toshiba Satellite Pro U500 with one small problem, the size of the LCD screen is reduced. I have a white border to the right and down. The max resolution is 1024 x 768.
  The problem is visible also when I enter the BIOS, so I think that the problem is not Operting System drivers.
  Is there a solution to my problem? I have to send in the audience?

  Thank you for the help
  Giuseppe

  H

  It is really strange, especially if you see the same thing in the BIOS settings?
  Since when did you notice this behavior?
  Do you use pre-installed OS original you got with your laptop?

  Have you done something that may be responsible for the issue described?

  I U500 and default display resolution is 1280 X 800 t, so I understand why you have 1024 X 768 on your U500.

• Re: Satellite M300 - should I replace a damaged LCD screen?

  My LCD screen is damaged and almost impossible to use. The laptop is still under warranty, but I understand screen damage are not covered. I don't know even how it happened. I'm not aware of any bump or impact to the unit.

  It is better to spend the money to replace the screen or it would be cheaper to buy a new computer? It is a spare computer that is only used if I am away from giant, holidays, at hospital etc.

  That the cost would be about, in Australian dollars?

  Thank you
  warrawillah

  Hi warrawillah,

  I think that it of difficult to tell if you need to replace the screen or buy a new computer. In my opinion it s based on the price of the new view.

  You need to contact a service provider authorized in your country. Guys can order all spare parts and if you want to replace it also.

  Good luck!!!

• LCD screen turns off without reason - Satellite M40X

  I have a problem with my laptop Satellite M40X, I work when the LCD turn off and I hear two PIF. To turn on the LCD screen I need to restart the laptop, but the problem persists after a few minutes.

  Can someone help me, please.

  Hello

  Here you can compare the version of the BIOS installed on the laptop with the one published on the page of the Toshiba driver.
  If you use the older BIOS, you can try to update. Maybe the update will sort this strange behavior.

  But there could also be a hardware malfunction if the BIOS update does not help.

• Portege R100 video cable does not reach the replacement LCD screen

  Hi guys, I have replaced the LCD screen of my Toshiba R100, than they had in it was defective. It seemed that it was a replacement at some point however. In any case, I received my new screen, but does not reach the video cable to the top of the circuit of LCD screens. How am I meant to connect it to the screen? Is there an extension cable or what? The screen they had in there previously looked like they were welded copper wires about 8 digitizer.

  Here are 2 pictures of what I mean

  

  

  Hello

  Where did you buy this screen?
  Are you sure that it is perfectly compatible with your laptop protected R100 to 100%?

  Looks like it s not fully compatible
  However, if an extra cable is necessary you can get it from the Toshiba ASP in your country.

  In your case, I recommend you contact the guy and ask for compatible cable!

  Welcome them

• Satellite 5100 - LCD screen no longer lights

  Hi, I hope someone will help me on this problem.

  After disassembly of the top satellite covers the lcd screen that does more, but I guess the system is working properly because I can hear windows access "jingle". I think that I reconnected it all cables (green and white connectors for the video card), but I'm not sure thin brown/white/black cable of the lcd screen. That's all

  Hi stefano88,

  Why you have disassembled the LCD?

  To be honest I n don't know cables, you want to say you also plugged the UPS FL for LCD display? This is necessary because FL inverter controls the backlight of your screen.

  Can post you a photo of the cables you want to say?

• Equium P200 1ir - where can I buy cable LCD screen

  Hi all

  I have an Equium P200 1ir and my screen has been crazy, color errors everywhere.
  I followed the problem down to be a cut wire in the cable of the internal lcd screen.

  My question is: where can I buy a cable lcd screen replacement for this machine that the screen itself is fine.

  I have searched all over the web and have had no joy. If possible can someone Toshiba advise me to buy the lead...

  Thanks in advance

  Antony

  Hello

  All laptop parts can be ordered from a local Toshiba authorized service provider.
  The ASP in your country should be able to help
  If these cables is not available or not on stock, then guys would be able to order this Toshiba head stock

  Have a look here to find all of the ASP in the world:
  http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service provider

• Satellite Pro U300 - the broken LCD screen

  Hi all

  My first post please bare with me.

  I have a Satellite Pro U300, who has a broken LCD screen.
  I have a replacement screen, but not sure how to go abouts it change places.

  Someone at - it a service manual for this model or the tricks and tips on how to disassemble the unit to swap the LCD broke with a new one?

  Any help would be greatly appreciated.

  The service manual can be downloaded. It s not for the public and it s only for Toshiba and approved providers available I think.
  On the Toshiba site, you can download the user manual, but I doubt it would be useful for you.

  I think the best way would be if you go to an authorized service provider. The exchange of the LCD is a little tricky and you should have experience with this.
  On the Toshiba site, you can search for an ASP. I m sure that the technicians will help you. ;)

• Part number 2006 imac 17 inch lcd screen

  Hello I have a question to try to get the correct part number Apple for a replacement LCD for my iMac Early 2006 17-inch 2.0 GHz model A1208 screen please?

  And yes my computer developed the vertical lines that eventually became half of a black screen, and although I can connect on my old iMac and see half of my office, I notice that I can not open the photos or images.

  So, I'm now trying to fix it.

  If you know what Apple suggested replacing correct these bad LCD screens, I would really appreciate it!

  Thank you!

  -Peggy neck in Northern Virginia

  Check with ifixit.com. they should know and maybe the part.

• Tecra 9000 - no display on the LCD screen when you turn on

  I recently got a Tecra 9000 for cheap on eBay. I am experienced with the construction and repair of computers, but not so with laptops.

  The problem with this laptop, it's that do not display on the LCD screen when you turn on. It was just black, no backlight, nothing. I took the laptop all share, found no obvious problem. I had to turn it on and the screen lights up a few times trying to figure out the problem. Would it be a bad connection? Or something else?

  After getting it to start work, I'll try to start to put it back together and it stopped working again. I haven't not been able to reduce it to know if it's a bad connection or a card problem.

  Someone at - it suggestions? This is a problem for others here?

  As you describe the issue, I think it is somehow a bad connection or a damaged cable, because it does not work once you have disassembled the screen.
  Maybe you need to check all the cables, leading motherboard to the LCD and take a close look, maybe for a few scratches or strong curvature.

• Bad monitor or LCD screen cable on Qosmio X 505?

  Looking for a little help to solve my problem.

  About six months ago my web cam log if I moved the monitor back or front. A month or two later the monitor should fade a bit. I have to move the monitor to restore its brightness. The monitor will now completely black if moved. I have to close it and open the lid (monitor) completely so that he could appear at the back and it still does not work the first time... I am running an external monitor via HDMI to avoid the problem... I really need to this address.

  This sounds like a cable of the LCD screen or a monitor problem? Looking at what part to replace everything first.

  Thank you for your time.

  You know very well that this virtual path no one can say with certainty what the problem and this question must be verified correctly.
  I put t know why you don t tell us what model of laptop you have.

  Anyway, if you have the new Qosmio notebook with valid warranty I recommend to contact the nearest Toshiba service provider and let them solve this problem. Warranty will cover all costs.

• Satellite A100 - display balack after replacing the LCD screen

  Hello

  So I'm trying to fix a LCD on a Satellite A100. The girl I am set as said she accidentally hit the screen with his hand and became black.

  When you turn on the laptop I can here windows activate, nothing is on the LCD screen. It is not the backlight, because I don't see anything on the screen at all. So I bought a replacement LCD screen and that one does not work either. Same question

  I think it is the inverter, any suggestions?

  Could be the sensor cover?

  Thank you! Kyle

  Hi Kyle,.

  Did you buy this new LCD screen to a service provider authorized? I ask this question because it would be interesting to know if it s a Toshiba valid a party or 3rd party a spare.

  Did you check the connection of the LCD cable? There may be a link to lose or the cable itself is touched.
  Theoretically, it might be the FL inverter too, but I doubt that. Otherwise, you'd see something on the screen but very dark.