T61 HDD replacement & compatibility

Hello

My trusty T61 5 years recently fell on systemboard questions that have been much discussed in this forum.

While I am considering whether to have the systemboard repaired or replaced, I am considering another temporary option:

I have an older R40 which seems to work very well [except his defective battery]. I was wondering if I could take my T61 HARD drive and put it in the R40.

It would fit? Would it not compatible? Would be the interface devices - screen / keyboard etc. work fine?

Sorry if this sounds like a stupid question.

Any help much appreciated. Thank you!

SGF

IIRC the R40 used a PATA/IDE interface and not SATA in T61 so the two hard drives are not physically or electrically interchangeable. You can check this by comparing the connectors at the back both drives.

Tags: ThinkPad Notebooks

Similar Questions

  • Thickness of Lenovo IdeaPad Z500 HDD; Replacement of SSD

    Hey guys,.

    I own a Z500 IdeaPad with a ST500LM012 HN-M500MBB 500 GB HDD by Samsung.

    I would like to do an upgrade with a 1 TB of HDD, I would put in the HARD Drive Caddy (replacement CD/DVD drive).

    And I also intend to get an EVO 840 Samsung SSD, I place in the main HARD disk location.

    BUT the HARD drive I have now is 9, 5mm thick. And the EVO 840 is 7 mm thick. I have problems in the main HARD disk location?

    And are there opportunities that I can fit a 12, 5mm disk in the location of main HARD drive or the HARD drive caddy?

    I'm terribly sorry for my English is not my mother tongue.

    Thanks in advance.

    medo994 wrote:... HARD drive, I have at the moment is 9, 5mm thick. And the EVO 840 is 7 mm thick. I have problems in the main HARD disk location?

    Answer: Page 71 of the Hardware maintenance manual provides 9.5 mm hdd/sdd can be used. If you have the Player 7.0 mm it can also be accommodated.

    medo994 wrote:... And are there opportunities that I can fit a 12, 5mm disk in the location of main HARD drive or the HARD drive caddy?

    Answer: For the housing of the primary hard drive, the cage hdd/ssd mounting is designed to 9.5 mm, so a 7.0 mm or 9.5 mm hdd/ssd will fit. However, a 12.5 mm will not match. The caddy, you see the caddy if it can accommodate a hard drive of 12.5 mm. You may need to check the side of the caddy against the STRANGE to see if it will fit in the odd-NUMBERED slot.

  • HDD replacement end 2012

    My 512 GB of HARD drive is full.  How to replace the HDD on a MacMini end 2012?

    https://www.iFixit.com/Guide/Mac+mini+late+2012+hard+drive+replacement/11716

    http://eShop.MacSales.com/installvideos/mac_mini2012_hd/

  • How to level a T61 HDD for one SSD without reinstall?

    Hi all. I bought this ThinkPad, I write with back in 2008 (a T61 6465-CTO with Vista and Intel integrated graphics) and he has been working a lot to me since then. I had no problems with it and his equipment is still able to manage what I have to do. However, I wanted to move her to an SSD HARD drive is faster and snappier. I know that I have would be limited at SATA1 speeds with this camera if I don't want to change the BIOS (which I did not), but I think that even this would be a great improvement on the existing HARD drive.

    To that end, I recently bought an SSD that their prices have dropped slightly (bought a new 120 GB SSD Samsung 840 for less than $100). I said SSD sitting next to me now but I did nothing yet because I want to make sure that I have the right to clone the old disk and swap in the new process. From what I understand instructions, I should:

    1 turn on the computer, install the Samsung Data Migration Software
    2. connect the SSD to a USB port via a USB-SATA Adapter
    3 clone the main for the SSD connected HARD drive using the software of data Migration
    4. turn the computer off, physically remove the old HDD and SSD in its place
    5 turn on the computer and everything should be fact/same as before (with the exception that the computer has a new storage drive)

    Is this correct?

    The HARD drive is encrypted so I removed the password for user/master I have to enter when it starts up, but what I have to do the same for the BIOS password that I am invited to when you turn on the computer? What the hidden; restore partition would clone too much or it would be lost. The HARD drive is in my opinion a 160 GB model, while the SSD is 120 GB but I have read that this difference in capacity should not be a problem since I'm using less of the new disc capacity (I have about 100 GB of free space on the HARD disk)?

    Sorry for all the questions. I have very little experience when it comes to changes in the software/hardware and I really would like to avoid wasting it so I would appreciate any help from people who have knowledge fact how to do this successfully. Thank you.

    The installation that you want to be cloning is optimized for spinning a player - not SSD - and you would have to align in a first time, disable the services later and again, you would not get the performance of a "clean" installation

    You can use any disk Vista installation as long as it matches the version (Home, Pro, full) on your COA - the worst that can happen is that you would have to call MS and activate by phone.

    I had the question why you want to the outdated drivers and other bloat Lenovo recovery partition on expensive SSD space as well, but it's your call. If you provision the reader - and I think you should - you won't initially that much space...

    TRIM running manually is certainly a possibility, but not one that I'm particularly sharp, especially on a small disc of TLC as the Samsung you have. You will need to be on it for not to have slow down for analysis.

    Good luck.

  • How to reinstall Vista after that HDD replaced and not reinstalled media

    My HP Pavilion m9080n HDD is a failure.  I would like to do a clean install (but would also be OK with any method) to rebuild on a new hard drive.

    * original title - how to replace a hard drive failed by a new hard drive and reinstalling Vista because my computer did not come with full support (just a recovery partition)? *

    Hello

    Contact HP and ask them to send you in recovery vista disc to reinstall the operating system back as it was when you bought it on the new drive

    they do it for a nominal cost of $

    http://welcome.HP.com/country/us/en/contact_us.html

    or borrow a microsoft dvd vista

    Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

    they contain all versions of vista

    This is the product key that determines which version of vista is installed

  • The Inspiron N5010 HDD replacement.

    Hello

    In my Dell Inspiron N5010, internal hard drive has failed and shows a bad sector error.

    Plan to replace it with WD 1 TB computer PORTABLE INTERNAL HARD DRIVE (WD10JPVT/WD10JPVX).

    His record was

    THE DISK CONFIGURATION
    Interface SATA 3.0 Gbps
    Type of device 2.5 inch HDD
    Cache memory 8 MB
    Disk capacity 1 TB
    Device Laptop
    Transfer rate 150 MB/s
    Reliability 600000 (charge/discharge cycles)
    Rate of transfer of data (to/from the host) 3072 MB/s
    Form factor 2.5 inches
    Non-recoverable read error 1 per 10 ^ 14
    Spin speed 5400 RPM

    Kindly let me know if it will build to Inspiron N5010.

    Thanks in advance.

    Any laptop SATA standard drive that is 9.5 mm or thinner will work fine.

  • T61 screen replacement instructions

    Hello

    recently, the display of my trusty T61 (7661-A58) broke and I amconsidering replace it with just the LCD screen. Is there a site with detailed instructions? or anyone can send a few?

    Thanks in advance

    George

    Hi and welcome to the forum!

    You can find detailed instructions in this HMM:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67760

    Or videos for your T61 lenovo service:- http://www.lenovoservicetraining.com/ion/

    I hope this helps.

  • T61 - HDD password is not editable - HELP

    Hello

    I have two T61 with 2.27 installed latest Bios.

    In one of them is a HDD SSD from Crucial I chose to protect as usual with a

    Drive HARD PW via the Bios. Now, I tried to change the disk to do this, I tried to release the IPL.

    This possible isn´t somehow, I can´t retype or not change either.

    The HD PW option is gray, it says user & Master but I can´t change all the options.

    I also tried typing the PW and then, space, no effect at all.

    No one knows what wrong with this PW or the disk, I tried on the two T61s.

    Hi and welcome to the forum!

    HARD drive password can be changed using special ThinkPad, it has been on.

    Put the drive into the ThinkPad allowing you to set the password on the HARD drive and see the following posts: -.

    http://forums.Lenovo.com/T5/W-series-ThinkPad-laptops/can-t-remove-HDD-password/m-p/322215#M12123

    http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/ThinkPad-T400-and-HDD-password-OCZ-vertex/t...

    I hope this helps.

  • T61 HDD no operating system validates

    I work at a major University (Paris is) and got a professional T61 6466 - 5DG. It was untouched since November 2007 because I was very happy with my T42 unfortunately struck by lightning through the telephone network. The T61 has been implemented under XP Lenovo in September 2010. I had 2 or 3 times a month a blue screen with something like "attempt to write to the memory. Victory to protect your system has stopped... Reboot... "and I did not like (I tried to build a personal network). "I received last week after the start of"HARD disk not initialized", I restarted and still last Friday the same on a blue screen dark after the Lenovo logo page, but it was the end: the T61 starts an Intel startup routine and said: valid no operating system on the HARD drive. The HARD drive is a Seagate Momentus ST9120822AS 5400-3 (ASM P/N 42 T 1306 and 42 T 1307 FRU). Connected trough is a USB adapter is only seen under XP in Device Manager and is "not initialized". A recovery tool to rebuild the file system (and I could copy the my important Documents) but lacked the FAT32 partition hidden (seen by the same tool on the drive HARD internal to an another T61 6466 - 5DG of a colleague). HARD drive through the Seagate Seatools long generic test and I am more than puzzled. Of course, I did not burn the DVD from the hidden partition: with a new labtop...

    We got in my T61 University many of the same brand and I checked 4: it's the same HDD Seagate and I found on the Web talks of early failures of Seagate Barracuda AND Momentus HDD. His colleagues are not afraid (IBM/Lenovo has been chosen on my suggestion for its reliability: I got the family 380 without any problem). Can you help me?

    Apparently there was a big bug in the software of these hard drives: Seagate explained they just sell the discs as OEM and software disk has been mounted by Lenovo. On the Lenovo support site, there is a software update for the discs. If it can help someone...

  • A100 HDD replacement

    We need to recover the disk hard as a former employee has deleted some files in the operating system.
    We do not want to reinstall Windows because it my effect some other files being deleted, and by accident!
    We have the software to recover the data, but must be able to access the hard drive and remove it, then run it on our test machine.

    Does anyone have an idea how to remove the hard drive?

    Hi guys

    I put t know how old is your laptop but I think HDD Exchange should be don by an experienced technician because if damage you some components of equipment or do damage on the lid or the threads of the screw the guarantee will on it.

    In any case I also have information that undercover HDD is set with just a screw like Meier said. If the slot in the HARD drive is removed, hold the HARD drive tab and pull the HARD drive bracket. After that the disk should detach the support.

  • Satellite R630-13D: HDD replacement SSD without voiding the warranty?

    I have a R630-13D. Can I replace a drive standard HARD with a SSD by myself without voiding the warranty?

    Hello

    Replacing the HARD drive should not void the warranty.
    To my knowledge, the replacement HARD drive is described in the user manual, and you should find a statement detailed how do this.

    Welcome them

  • Portege 7200 - HDD replacement/upgrade

    I want to upgrade my Portege 7200 with the standard 12 GB of HDD to a 60Gb, my questions are:-
    1. do I have updated BIOS?
    2 Will fit a standard 2.5 notebook HARD disk drive 9.5 mm inches (for example 60 GB 2.5 "IBM/Hitachi Travelstar 7 K 60 ATA100 7200 RPM, 8 MB)
    3. is special caddies or cable required.
    4. someone at - it instructions or is simple.

    Thanks in advance for your help.

    Hello.

    regarding your first question:
    BIOS update is useful, but I don't know how much GB the most recent BIOS for P7200 can handle! Try a test!
    2. normally a 2.5 inch HDD fit. I don't know who the old we have size, but you can compare it with the OE ew!
    3. no
    4. normally the change of HARD drive is not difficult. The problem is "the BIOS detects the new HARD drive and the right size." But this only experience could help you!

    Bye Bob

  • T61 and Windows compatibility 8

    Any person in charge of Windows 8 on a ThinkPad T61? Is the case, is there incompatibilities? I am currently running Vista Business 32-bit on my T61 but I plan to switch Windows 8.


  • Old HDD replacement

    Hello! I want to replace my old drive (st9500325as, 9mm) with ST500LM000(7mm) in my laptop (N5010). Which would be OK?

    Yes, but you may need a spacer so that the reader aligns properly.  If your drive does not come with one, you can buy them for a few dollars.
    For example,.

    http://eShop.MacSales.com/item/other%20World%20Computing/SSD95MMSPCR/?utm_source=Google&utm_medium=shoppingengine&utm_campaign=GoogleBase&gclid=CMuDgufogL4CFYtDMgodmiAAGw

  • T42 Fan replacement compatibility

    I replace the fan on a ThinkPad T42 2379 - 1.

    Could someone please confirm that the correct replacement fan is "fan (short) (14.1 - po)" FRU # 26R7860.

    Very appreciated

    IBM maintenance (that's $49) parts or eBay.

Maybe you are looking for

  • Message to "Check video cable" HP 2311 X

    HP, I have a HP 2311 x which was bought in end Nov 11.  I used it with my custom computer Pro Windows 7 64 bit on a GTX 460 graphics card via DVI.  Friday I started to get the message to check the video cable to a black screen and then the screen to

  • Windows 7 update stops at 61%

    Hello, I would just ask something on my windows7 update, it automatically downloaded 18 upgrades for my pc but once I restarted and updates began to set up, the process stops at 61%, right on the start screen. Ive tried to reset in the middle of the

  • Strange behavior of edge 95 MXP endpoint

    Hi Experts, I have a Codec on the client side (Germany), it's an edge 95 MXP with software version F9.3.1 PAL. Every time when I call from my 150 MXP, video calling is disconnected by this Code after 58 seconds. When I make the call of this Codec to

  • PS CS6, how to record the Action to move from one image to the other layers?

    I created a border that includes my studio logo and the logo of the local Chamber of commerce. These layers are to copy images (about 40) before you print it. I recorded MANY actions to do so, but they do not work. I searched Youtube for videos - No.

  • It is work in jdeveloper but does not not in Oracle applications throwing below error

    Can someone help on this issue please UrgentError pageDetails of the exception.oracle.apps.fnd.framework.OAException: could not load application module 'sample.oracle.apps.po.samplesales.server.SampleSalesAM '.at oracle.apps.fnd.framework.webui.OAJSP