Windows 7 update stops at 61%

Similar Questions

• Windows Vista update: STOP 0x0000007b on crcdisk.sys

  I tried to apply the patches via Windows Update February, twice, twice completely streaked my Vista installation.

  What happens is that Windows Update downloads updates and application restart. The restart ends at STOP 0x0000007b.
  If I then boot in safe mode, I can see the boot process stop for about a minute with crcdisk.sys displayed, followed by the BSOD.
  The parameters are: STOP 0x0000007b (0x0c0000000e, 0 x 000000000, 0x080399bb0, 0 x 0000000).
  This happens both to the normal boot and safe, so the only solution I found was to reimage the computer.

  I have on my firewall on the computer 1, 2 anti-virus and 1 products anti-intrusion and surf using Firefox with several security extensions, so I guess that my computer is not infected.

  Ideas patch that is responsible for the problem and how to avoid it?

  However, I am not infected with rootkit Alureon, I have set my computer with Avast, Malwarebytes, McAfee and Spybot S & D scan.
  So I doubt rather requests above that Alureon is the sole cause of the BSOD.

  Rootkit TDSS [AKA Trojan W32/Alureon] has silently the net
  
  TDSS rootkit 3rd variant is the last member of the Tdss rootkit family that is spreading quickly all over the world. While a number of rootkits is just developed as a proof of concept, this is not the case. TDSS rootkit is well known corporate antivirus because of his goal to get full control over the infected computers and to use them as zombies for its botnet.

  During these years, that he has always shown a team of skilled people behind it, which always applied advanced techniques often able to bypass antirootkit software. In fact, this last Variant can be easily named as the stealth rootkit in the wild.

  This infection is having all the best of MBR rootkit, the best of the Rustock.C and the experience of the old Tdss variants. The result is an infection that spreads quickly on the net and it is not detected by almost all security software and 3rd party anti rootkit software. [emphasis]

  .. [20 Nov-09] terms no antirootkit is able to bypass disk filtering technical used by Tdss rootkit but, even if it were possible, this rootkit could not be detected by file size cross check because the size of infected files and original file are exactly the same.
  
  http://www.prevx.com/blog/139/TDSS-rootkit-silently-owns-the-net.html

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 2000 update stops at "checking if your computer has the latest version of Windows Update software for use with the site... »

  When I try to update Windows 2000 by using Windows Update, web site crashes the message

  'Check if your computer has the latest version of Windows Update software for use with this web site... The Web site uses ActiveX controls to determine which version of the software your computer is running. "If you see an ActiveX warning, make sure that the control is digitally signed by Microsoft before installing it or allowing him to run.

  Y at - it a fix for this problem?

  This problem may occur in Windows 2000, Windows 2000 SP1 and Windows 2000 SP2 on computers. These versions are no longer compatible with the Windows Update Web site. To resolve this problem, you need to install the latest Service Pack for Windows 2000 computers. Follow the link below to access the article and get with the latest Service Pack.

  http://support.Microsoft.com/kb/260910

  Bobby

• My Windows system update stopped downloading programs he wants to install, how to install the updates again? The error code is 80070490

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: How can I fix the error 80070490?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Quote your full version of Windows (for example, WinXP SP3;) Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  Assuming Vista...

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vista - step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed. http://support.Microsoft.com/kb/948537

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx
  
  Source: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/7dca9387-4c4f-4f74-811e-4de3bcd1ba9e

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 10 update stopped at 99% and Windows 7 mouse doesn't scroll properly

  Original title: windows 10

  I am upgrading to windows 10 and I have a good computer, then it should be quick, but the download has stopped and it remains at 99% so I don't know how to solve this problem at all and I have another question on my mouse, I use windows 7 and my mouse doesn't scroll properly.

  Hello

  Please contact Microsoft Community.

  I can understand how annoying, it would be, I suggest refer you to the suggestion given by Andre Da Costa in the mentioned thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-windows_install/installing-Windows-10-on-a-Windows-7-machine-stuck/d5e75999-A217-40C2-9A09-7b5f6cfbb5ca

  I hope this helps. Do not hesitate to contact again us for any further assistance.

• Windows 7 update fails, the 0xC8000222 error code

  Hello everyone,
  I need help with a problem of Windows 7:
  Windows update is not available, trying to start it it claims that I HAV eto restart the computer to make it work.
  But then, this does not solve the problem.
  I can't get updates and Windows activation update stops with the same error.

  Any suggestions that can help (other than a "Hail Mary") ;-)

  Thank you
  LittleX

  Hello, Azam!
  Thanks for your quick response.
  I found THE solution for my problem yesterday on answers.microsoft... (can not find the post yet, will try again later).
  I had to stop the update service, delete all files and folders in c:/windows/C:\Windows\SoftwareDistribution and restart the Update Service. And Auntie... There it is! And running and arguing that there are updates important (at least) 66 in the meantime :-)
  This is my night...
  Thanks again and have a nice day.
  LittleX

• KB2286198 Windows Update causes Windows Live Messenger stops responding and crashed.

  After believing that my computer has somehow a virus and spend hours trying to solve the problem, I think that an update is causing the problem: I solved it by following these steps:

  KB2286198 Windows Update causes Windows Live Messenger stops responding and crashed.  Resolution: restore to before the update has been activated Windows installed updates and hid the update, so it would not automatically reinstall and the program works.  Please, difficulty of the update or rewrite it.  I can't imagine that I'm alone on this breaks.

  You will find support for Windows Live Messenger in these forums: http://windowslivehelp.com/forums.aspx?productid=2

  You can find support for the installation/uninstall/upgrade / upgrade to Windows Live Essentials in this forum: http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec

  Note: In the not-too-distant future, Windows Live Essentials 2011 QFE2 will be a mandatory update.

• My system installs the updates of windows, whenever I stop

  My system installs the updates of windows, whenever I stop.  What should I do to prevent this?

  See: http://support.microsoft.com/kb/910339 . All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• Windows Update stops to take back me to the restore point

  Windows Update stops to take me back to restore point windows 7

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• MAKE WINDOWS UPDATER STOP annoying me

  Is there a way to make Windows Updater STOP recommending an update 'Important '?  I don't use Internet Explorer, it ask me download a 8.8 MB 'security update' for IE, which I did not need.

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  While you can't use IE, Windows does so it is very important to keep IE (and Windows) fully-patched at all times!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have not re start the computer after the update.__What of windows that I stop front of the computer?

  My XP does not work after update on February 10, 2010.
  So my vista never stopped for the day.

  I have uninstall all update February 10 on programs and features .
  KB971468, kb974145, kb978251 kb975560,
  KB977165, kb905866 kb978262 kb890830
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Checked virus AVG and Adaware.

  Is it way before reboot memory diagnostic?

  What should I do before closing this computer?

  I also made down them before the stop.

  Restore Windows Vista to a previous state
  http://www.bleepingcomputer.com/tutorials/tutorial143.html#restore

  Check The Windows Vista memory diagnostic tool
  http://www.bleepingcomputer.com/tutorials/tutorial146.html

  Replace configure Microsoft Update automatic update not .
  http://www.Microsoft.com/NZ/protect/computer/updates/MU.mspx

  I'm glad that my Vista is not working properly.

• Whenever I try to update, I get the message "windows Explorer has stopped working". It then seeks a solution, restarts, and immediately stops again. No error code just a constant circle. This has happened for days. I am running windows 7.

  Whenever I try to update, I get the message "windows Explorer has stopped working".  It then seeks a solution, restarts, and immediately stops again. No error, just a constant circle of shutdown and startup code.  This has happened for days.  I am running windows 7.

  I think that norton or mcafee may have been preinstalled as trial versions, but I've never actually used them. Unfortunately I can't use the windows Explorer, so I can't check if they are still there.

  We will cover all the possibilities.

  1. download each of the tools for deletion below, save it to your desktop:

  Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all software (including LiveUpdate and Add-ons of Norton) Norton through Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view)

  IMPORTANT! => Activate the Windows Firewall immediately after the restart.

  IMPORTANT! => Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed the steps #4, #5 and #6 below!

  4. right click on one of the files that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  5. Repeat step #4 for another removal tool.

  Tips:

  -Online use another computer to download the removal tool, if necessary, then transfer it to the computer via CD, DVD, or a USB brand new, never been used (flash drive), or a summer freshly updated in shape.

  -Online start the problem in Mode safe computer, if necessary, proceed as above.

  -Online after completing all of the above, uninstall AVG Free & reboot. Now do a new installation of AVG Free 9.0, this time select the CUSTOM installation option and do NOT install (uncheck) Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.

  Why you don't need your anti-virus to scan your email
       http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  -Online download/run system update before running Windows Update again: http://support.microsoft.com/kb/947821

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update stops download of updates and install updates same as if they were never installed

  Windows Update stops download of updates and install updates same as if they were never installed

  Hi Skimbrell,

  Welcome to the Microsoft Answers Community Forum site!

  To resolve this problem, determine if the update has been installed. Then, use one of the methods in the section "Troubleshooting the problem.

  Determine whether the update has been installed

  To determine if the update has been installed, use one of the following methods.

  Method 1: Examine the history of installation
  To view the history of installation, follow these steps:
  1. click on Start, point to all programs, and then click Windows Update or Microsoft Update.
  2. on the Web site, click view update history.
  3. Locate the most recent entry for the specific update.
  4. Note the color of the icon in the status column. If the icon is green, the update has been installed. If the icon is red, the update is not installed.

  For more troubleshooting information, visit the below mentioned link:
  http://support.Microsoft.com/kb/910339/

  Method 2: Reset Windows Update components.
  In order to reset Windows update, visit the following link:
  http://support.Microsoft.com/kb/971058

  I hope the above helps solve your problem!

  Thank you best regards &,.
  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• How can I stop including windows xp update?

  Hi friends,

  How can I stop including windows XP update? Because I need to stop the update audio driver Conexant HD, if this update install in my laptop, then leave my audio device is stop working. Does anyone know how to block a specific update while

  by allowing automatic updates to function normally?

  Thank you and best regards,

  Celine Annem

  Updates of pilot - which you should never accept Windows Update (for XP) - are "optional" and do not install automatically.

  You can also set Windows Update to download but not install updates (until you look over and decide which ones to install) or to inform you that updates are available.  See http://support.microsoft.com/kb/306525/en-us

  And if you don't want to be constantly offered a particular optional update, simply check the box for ": hide this update" (or "don't show me this update again") - http://z8.invisionfree.com/ComputerHelp/index.php?showtopic=676

• Blue screen with Windows updates: Stop 0 x 00000077 (0xC000000E, 0x06F16000, 0x000000E, 0 x 0000000)

  I came back to a blue screen (this is the 3rd time) in the last 2 days. the message read:

  A problem has been detected and windows has shut down to prevent damage to your computer.  KERNEL_STACK_INPAGE_ERROR. If this is the first time to see this message to restart your computer. This is my 3rd time *.

  If the problem continues disable or remove any newly installed hardware or software * how to locate these items? ***

  Disable the BIOS memory options such as implementing caching or shadowing him * how I do? ***

  If you need to use safe mode to remove or disable components, restart the computer, pressF8 to select advanced startup options, and then select Safe mode.   I did not follow the previous process again simply because I don't know how.

  However, when I type ctrl/alt/delete message closed and I restarted my laptop. When you click on Interent explore a microsoft window opened and suggested that I run Mircosoft updated. When I run the search for update (using express) I get the message: [error number: 0xC800042D] 0 x 00000077 (0xC000000E, 0x06F16000, 0x000000E, 0 x 0000000) indicating that it has encountered a problem and that he was able to complete the search for my updates that it said I had need... now what that?

  Hello

  1 how long have you been faced with this problem?
  2 do you have you can all changes on the computer before this problem?
  3. do you get the blue screen only when trying to install or verify the windows updates?

  I suggest you to follow the steps mentioned in the article below and let us know your progress.
  You receive an error message on a Windows XP-based computer: "Stop 0 x 00000077" or "KERNEL_STACK_INPAGE_ERROR"
  http://support.Microsoft.com/kb/315266
   
  Also check out the article below.
  Error message on a computer that is running the Windows operating system: "Stop 0 x 00000077 KERNEL_STACK_INPAGE_ERROR.
  http://support.Microsoft.com/kb/950415

  You can find the installed hardware and the software on the Device Manager and control panel command respectively.
  Reference:
  Uninstall and reinstall devices
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/devmgr_s3.mspx?mfr=true
  How to change or remove a program in Windows XP
  http://support.Microsoft.com/kb/307895