T61 - RC of Windows 7 drivers nVidia Quadro...?

Similar Questions

• T61 Nvidia Quadro NVS 140 M... garbled display problem!

  I have a T61 (bought in August 2007) with Nvidia Quadro NVS 140 M graphics card. I still have problems to display with the screen all of a sudden get green (?). When restarted, the BIOS itself shows a corrupted image (screen half blue, half red) and some random characters. This only happens if I use the PC for 15 minutes. Once he gets a chance to cool down, it goes back to normal working conditions.

  My warranty expired about a month ago and since I see this problem. Can anyone suggest what could go wrong.

  Thank you.

  
  

• Problem resolution DVI - nVidia Quadro NVS 120 M

  Hello

  I recently bought a Philips monitor LCD flat screen 220BW8 for use with my laptop Latitude D820 Windows XP with nVidia Quadro NVS 120 M (256 MB) graphics card. It works fine in VGA mode, but I have the weirdest problem when I try to use a DVI connection:

  The maximum screen resolution is 1650 x 1080. When I put the screen (by using the display settings in Windows) to this resolution and use a DVI display connection complains I should use 1650 x 1080 instead of 1650 x 1200. Indeed, the display shown is larger than the screen and pans when I move the cursor to the edge of the screen, but Windows reports that the resolution is 1650 x 1080 (while, again, the monitor reported that the resolution is 1650 x 1200).

  When I watch carefully the dual link DVI - D cable I bought with the monitor, he said "resolution 1600 x 1200 and older" (I have not noticed until that moment). Now, I tried another dual link cable as well as a single link cable. Neither cable resolves the issue. I still can not 1650 x 1080 resolution on the screen even if I ask for it in Windows.

  No one knows what might solve this problem?

  Message edited by TFN on 04/03/2008 13:55
  
  

• HP Compaq 8710w and drivers Windows 8.1 for Quadro FX 3600 M

  Hi everyone I have a HP Compaq 8710w and it works very well so far.

  There is a problem experienced with Quadro FX 3600 M drivers in Windows 7 If you do not use the old drivers given the HP (186,24) but other than that, everything is ok.

  https://forums.GeForce.com/default/topic/516145/legacy/Quadro-FX-3600m-problems/

  / t5/Notebook-HP-ProBook-ZBook/8710w-Win7-random-freezing-black-screens/td-p/2337373#. VFdIW_msWfw

  I want to improve my current Windows 7 Ultimate for Windows 8.1 but I can't find the official drivers from HP and I'm afraid that the blue screens of death will be back.

  Is it possible to give official drivers for the Quadro FX 3600 M of this laptop great for Windows 8.1 because it is a known problem that all the other drivers do not work properly.

  Thanks in advance

  George

  P.S. This thread was moved from the company - Compaq, Elite, Pro for laptop - PC HP ProBook, EliteBook, ZBook, slate/Tablet PC, Armada, Compaq LTE. -HP moderator of the Forum

  As for the help of all the other drivers, there is an option that works for me.  If you must use a driver newest to work with Win8.1 (I have) there is a solution, but the will of costs over the life of the battery!

  I had been using latest drivers for my 8710w fx3600m rigging using this method and I hope that it is a possible solution for you as well:

  Download a newer driver for the fx3600m for Win8.1 and it's a good idea to film for WHQL drivers.

  I am currently using the 334.95 driver (334.95-quadro-notebook-win8-win7-64bit-international-whql.exe).

  DO NOT install the drivers right away.

  Download"Powermizer Switch.exe" here - http://www.box.net/shared/v7jpoateoq

  Powermizer Switch.exe extract on your desktop for quick access.  You will need to be easily accessible.

  It may be a good idea to make sure you're clean of any other video drivers Nvidia beforehand.

  Now, we are ready to install the driver.

  IMPORTANT!  When you install the driver, only select the driver and nothing else and don't forget to restart immediately!

  Once on the Windows desktop, start immediately 'Powermizer Switch.exe', click on 'Powermizer Off' and YES to restart!

  This will allow all pilots before the xx 192.le and eliminate the blackscreen/blue screen issue.

  NOTE: any time you pass or update the drivers (former 192.xx), you will need to use this scheme every time!

• W520 on heating and nvidia quadro 2000 m disabled by windows

  As I reinstalled windows 7 on my W520 and refusing to activate my card nvidia quadro graphics 2000 m (Code 43)

  For a while the fan is overheating and the left hinge right become very hot.

  I think that the graphics card is dead, but I want to know why and if I can stop the overheating.

  Is the graphics card soldered on the motherboard of the W520?

  Thanks for your help.

  PS: Only the Intel HD graphics chipset is running...

  If the guarantee of the machine is still in force, it will be covered, unless it has failed because of some accidental damage like a spillage. In this case, it will be refunded only if the original owner bought the optional warranty "accidental damage".

• PRECISION M90 WINDOWS 8 DRIVER on Nvidia quadro FX 1500

  Good afternoon

  I've updated my Precision M90 from Vista to Windows 7 and after Service Pack 1 of Mircosoft problem to drive all has been resolved.

  Now, considering that on the DELL support site are not information on the compatibility between M90 and Windows 8 I believe in Microsoft Assistant who would confirm that the Nvidia quadro FX 1500 video card will be compatible.

  I installed Windows 8 and I have problem with video card: If stay with Windows driver I can not work because it is a generic driver and the video Resolution I not good.

  If I install the Windows 7 driver on Nvidia good office work support site but then when I go to menu "M", also well know Metro, the S.O. go out of mind and the new cyano BSoD appear on the screen.

  I have askd technical support Microsoft forum and they suggest me in the bad way that DELL must help me.

  So please can someone led can inform me if it is possible to solve this problem?

  Thank you.

  I had success with the driver, 185.20

  Good luck

• DRIVERS NVIDIA for WINDOWS 7 hp compaq presario CQ 3520IX model: BZ604AAA #CJ

  I want TO INSTALL the NEW DRIVER FOR MY PC - Hp Compaq Presario CQ 3520IX

  BZ604AAA #CJ MODEL NUMBER

  AND ALSO TO REGISTER MY COMPUTER ONLINE

  Send me a message at: {information}

  We'll find all HP specific Windows 7 drivers for your computer on the page drivers of Compaq Presario CQ3520IX desktop PC. A newer Intel graphics driver installation is not possible, due to the customization of the driver.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• TECRA S5 Nvidia Quadro NVS130M - sudden BSOD - Win 7 Pro 32-bit

  After moving from Vista to Windows 7, everything worked fine until two days ago, when suddenly my laptop stopped working. I had to hard restart it, and then all hell broke loose.

  The problem is the following:

  Info part number: PTS53E-00S009EP - Toshiba Tecra S5 - 2 GB Ram Intel Core 2 Duo T7300 2.0 Ghz - Nivdia Quadro NVS130M

  Windows 7 Professional 32-Bit started to report all of a sudden and the error code 43 for the graphics card (Nvidia Quadro NVS130M). I got the latest nvidia drivers, so I uninstalled the previous and restarted the machine and installed the new. After the restart, the laptop crashed with a blue screen.

  I went back to the last known good configuration (drivers vga adapter default of windows, which does not recognize the Nvidia Quadro NVS130M) and the laptop booted up normally allow me to get back into Windows.

  I went to the Nvidia drivers previous, and arrived the same problem, blue screen, go back to the last known good configuration (by default windows vga adapter driver).

  I went back to the latest drivers for the Nvidia Quadro NVS130M found on the download from Toshiba site, same situation as before.

  I went backwards to the oldest drivers on the Toshiba Support downloads site, and the question remains.

  Since August, I have Windows 7 Professional 32 - Bit and it worked fine, it is completely up to date, and have always used the two wit the factory default Vista and Windows 7 Nvidia drivers.

  I have installed windows updates recently, the latest being early November 2011.

  That recent change, about 15 days ago, it's that I've finally found the drivers for the SD card reader, they where for windows XP it is interesting enough, but Windows 7 immediately recognized the SD reader that she had not until then. He could not yet identify the kind of material, it has been.

  I tried to uninstall the drivers from toshiba for the reader of SD card, but even in this case with this uninstalled and hardware disabled in the management of the material, when I try to use the factory drivers downloaded from Toshiba blue screen happens again.

  Another symptom, I noticed is if the blue screen do not occur (when he does it specifically lists a file from drivers nvidia as the cause), the computer will stay with a black screen and the fan will operate at extremely high speed, but there seems to be no HARD disk activity, as the drive HARD activity on the laptop does not light at all.

  I read there is a problem that can lead to the computer by blocking or gel at least that the latest version of the UPEK software is used. However it does not mention anything on a blue screen. Also, given that the blue screen error message specifies a Nvidia driver file name, he wouldn't do much sense this problem it was the UPEK fingerprint software that was the cause.

  He wouldn't make any sense at all because if I leave the default vga only adapter driver and do not install a driver for the graphics card, everything works well, reader SD, UPEK Figerprinting, etc...

  I had all this work, including the fingerprinting software until exactly two days ago for what the confusing too me.

  I ran Endpoint Protection AV software from Symantec, the computer is perfectly clean, there is no virri and indication as abnormal.

  I'm now totally ideas and I can't seem to find information on this topic.

  Your help is very appreciated and urgent, because if all else fails, I would be forced to go back to Vista, something that I wouldn't really really really like to do, because of the hassle of reinstalling OS, Office and software for a total of more than 50 GB and due to the fact that Vista is significantly lower in so many aspects to Windows 7.

  Thanks in advance for your help and support.

  Post edited by: Jörger

  Post edited by: Jörger - Typos

  Post edited by: Jörger - Typos & lack Party Info

  Hi Jorge,.

  I've also read about pilot of fingerprints that cause a freeze on the Tecra series but as far as I know it was about A11 and M11 series S5 shouldn't be affected, but to be honest, the described issue looks more like a problem of graphics chip
  Eventually it s graphic driver not question but related graphic chip problem

  But have you tried to test the laptop with the new OS preinstalled? Try this and use the operating system has been pre-installed by Toshiba in this case, you might check if he s really a problem or a chip driver problem

• Tecra M9: When a driver WHQL XP for NVidia Quadro NVS 130 M will be available

  Hello

  I am trying to downgrade a Tecra M9 from Vista to Windows XP and I want to know when a driver WHQL for NVidia Quadro NVS 130 M will be released because the latest version from the support CD is a beta version and is not WHQL.

  Thank you very much

  But - this important if the driver passed whql? In my opinion NO, because this thing whql is a pure invention of microsoft. If I were you I would install that drivers matter so certified or not and if you really have problems, then you can always give some feedback.

  By the way: where sought pilots?

  Welcome them

• Dell Precision 7710 with NVIDIA Quadro M5000M problems with 3D WPF content

  I have a

  Dell Precision 7710

  6920HQ-i7 CPU @ 2.9 GHz

  32 GB of Ram

  Windows 7 Pro Sp1

  NVIDIA Quadro M5000M 369.49 driver version

  I bought an upgrade for my

  M6700 Precision

  Our company has developed and uses software that uses WPF to render 3D content in a XBAP in Internet Explorer.  When I try to use it on the 7710, 3D content flickers when it is redrawn, makes it almost unusable.  The stats we can get our application, we can see that time of update for refreshment / current is about 45ms, while on most of the other PC, even those using the integrated Intel graphics card, typically 12ms.

  We used this software on a large number of PC without feeling anything as bad, which is obviously quite disappointing because the laptop should be able to view we want to hassle.

  As far as I can tell all our drivers for everything on this laptop are up-to-date.

  We tried using the NVIDIA Control Panel to force the laptop to use the High Performance Nvidia Quadro rather than the graphics card integrated card and it seems to be made while we were able to do, it shows the icon in the taskbar notification and which showed that IE was using the Nvidia.

  I tried tweaking pretty much all other settings I can think / see.

  I tried to use the Dell Precision optimizer to select different profiles with no luck.  The Dell Precision optimizer seems not really demonstrate the use of the GPU processor or any other stats to see with the GPU, which seems odd to me.

  I ran Diagnostics on the laptop available on the Dell support site.

  I searched the net and found a few examples of problems with Nvidia and WPF cards, but none of these things that we found seems to apply to our application.  We have desktop computers at the office where he works well with other Nvidia cards / best of all.

  In addition, the fan on the 7710 will quite difficult sometimes - hard that I expect.  I tweaked the power settings to move less, but it always seems to run the fan more that I think it should / would appear on my M6700 - or maybe it's just a fan of stronger.

  So I wonder:

  If anyone out there has experienced something similar?  If so, any suggestions on how to fix or things to try would be greatly appreciated.

  Thank you

  We solved the problem by making changes in our application software.  We still don't seem to be able to reach the same FPS as for the other GPU, which should be similar, but we're working on that also.  Perhaps because we are trying to run the application at 4K.  If anyone has a similar laptop and can provide details on the 3D graphics performance using any software comparative analysis, it would be great if they could share for comparison.

• Problems with the Precision M4400 and the graphic card Nvidia quadro 770M

  I have a problem with my Precision M4400 and Nvidia Quadro 770 M. After I installed Windows 7 64 bit, I have problems with the graphics card. I get a blue screen or graphic errors. I tried several versions of the driver. In the Nvidia forum had this problem even more. Here, they told me that only a BIOS update for the graphics card to solve the problem. Update the BIOS, but I should refer by DELL. So my question is this problem with Dell is also known, and there is already an update of the BIOS to the Quadro 770 M?

  Hi all

  I have the solution by chance. I was looking for the latest drivers GeForce for Windows 7 x 64 and I read the accompanying note: http://fr.download.nvidia.com/Windows/337.88/337.88-win8-win7-notebook-release-notes.pdf
  On page 17, you can read the following note to fix: "[GeForce FX 770 M] [portable]: blocking of the blue screen occurs after Windows starts."
  
  Of course, GeForce FX 770 M does not exist (and never was), and it should be Quadro FX 770 M. I can bet that nVidia has corrected this famous BSOD problem in the wrong driver because always there is nothing about any "Quadro FX 770 M - fix" in the note accompanying the latest Quadro (340.52) driver.

  You try the GeForce driver above, but to install it, you may need to download an INF file modified with the addition of the ID of Quadro FX 770 M (= "NVIDIA_DEV.065C ="NVIDIA Quadro FX 770 M"). Try without the first modified INF file because the Quadro FX 770 M is listed as a compatible chip in the version of the driver GeForce 337.88 note...

  I'll try that, even though I am completely sastified with the latest driver for Quadro (feasible) (285.62) without disable Powermizer. I did not try the latest Quadro drivers again (to be honest).

  Late me know please.

• BSoD with nVidia Quadro 600

  Hello

  I started having BSOD, often when I have two monitors connected to my nVidia Quadro 600. When the computer restarts the map is missing from Device Manager, but I can still RDP to it. I have to stop and switch to get the card working again. I downloaded my MiniDumps here:

  https://SkyDrive.live.com/redir?RESID=34B5DF8F5A0E8525! 163 & authkey =! ABzpoKLYNwU4nbI

  Any help much appreciated. I already have the latest drivers and that you have enabled Windows Update.

  Thank you, Jamie

  Jamie

  
  "It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

  Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

  As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.
  If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.

  If playing with video driver versions did not help, make sure that the box is not overheated.
  Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.
  Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

  If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

  I download cpu - z and gpu - z (both free) and keep an eye on the video time

  For more information please read this blog http://captaindbg.com/bug-check-0x116-video_tdr_error-troubleshooting-tips/  

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557263%28V=vs.85%29.aspx

• M4600 recognized nvidia quadro 1000 m

  Hello!

  I wanted to update my graphics driver - so I downloaded the new version of the official web site of dell. I got the error that it is not compatible... I read somewhere that it is good to uninstall the previous driver and install a new one. Yes, but after I uninstall the old driver, my windows does not recognize the video card. I can't see it in the Device Manager to all. I have only a 2nd generation Intel (R) CORE (TM) processor family PCI Express controller - 0101, which is not installed correctly. I guess that's something this optimus technology, but I have no idea how to solve this problem. My last idea is to try to repair windows 7 and if not - system reinstall...

  Thank you!

  Hello

  I think your feeling that the nVidia Optimus technology prevents you installing these drivers is correct. If you try the following, this should solve the problems that you are experiencing:

  (1) install the drivers for the chipset from here: www.dell.com/.../precision-m4600

  (2) install video drivers Intel GMA HD from one of these links, depending on whether you have Windows 7 32-bit version or the 64 bit version of Windows 7:

  For Windows 7 32 bit - http://www.dell.com/support/drivers/uk/en/rc1050265/DriverDetails/Product/precision-m4600?driverId=3WRFM&osCode=W732&fileId=3171544946&languageCode=EN&categoryId=VI

  For Windows 7 64-bit - http://www.dell.com/support/drivers/uk/en/rc1050265/DriverDetails/Product/precision-m4600?driverId=XGPWM&osCode=W764&fileId=3171545383&languageCode=EN&categoryId=VI

  (3) install the drivers from nVidia Quadro to one of these links, depending on whether you have Windows 7 32-bit version or the 64 bit version of Windows 7:

  For Windows 7 32 bit - http://www.dell.com/support/drivers/uk/en/rc1050265/DriverDetails/Product/precision-m4600?driverId=MWXDK&osCode=W732&fileId=3153895357&languageCode=EN&categoryId=VIfor Windows 7 64-bit - http: www.dell.com/support/drivers/uk/en/rc1050265/DriverDetails/Product/precision-m4600?driverId=X86RM & osCode = W764 & 3153895880 = starts & languageCode = EN & categoryId = VI "target ="_blank"> http://www.dell.com/support/drivers/uk/en/rc1050265/DriverDetails/Product/precision-m4600?driverId=X86RM&osCode=W764&fileId=3153895880&languageCode=EN&categoryId=VI"

  (4) update system BIOS by downloading and running the following file: http://www.dell.com/support/drivers/uk/en/rc1050265/DriverDetails/Product/precision-m4600?driverId=2429K&osCode=W764&fileId=3162771607&languageCode=EN&categoryId=BI (when running the BIOS update, right click and select "run as Administrator", also ensure that the system has the adapter sector and committed battery and that you do not interrupt the power when the update of the BIOS is in) executing)

  Let us know how you go!

• PS CC 2015 crushing on launch Win10 x 64 nVidia Quadro 4000

  I just migrated to a new Win10 x 64 machine with nVidia Quadro 4000 video card. It's the same model of card I used in my Win7 x 64 machine with good success. I bought these cards specifically for compatibility of Photoshop.

  On the new machine, PS crashes at launch, with typical error: "Adobe Photoshop CC 2015 has stopped working".

  I tried all the solutions I could find online, including renaming them librarylookupfile, check that I have the latest video drivers, etc.. Nothing did. I'm puzzled. Interestingly, after that the first couple goes down, offered creative cloud suddenly a PS 2015 update, which I installed it. Still no joy.

  Here are the details of the problem in Windows journal:

  Source

  Adobe Photoshop CC 2015

  Summary

  Stopped working

  Date

  01/01/2016 14:49

  Status

  Report sent

  Description

  Application of vulnerabilities path: C:\Program Files\Adobe\Adobe Photoshop CC 2015\Photoshop.exe

  Signature of the problem

  Problem event name: APPCRASH

  Application name: Photoshop.exe

  Application version: 16.1.1.327

  Application timestamp: 5667fb90

  Fault Module name: SelectivePalette.8li

  Fault Module Version: 2.1.4.20903

  Timestamp of Module error: 50473db7

  Exception code: c0000005

  Exception offset: 000000000013a 812

  OS version: 10.0.10586.2.0.0.256.48

  Locale ID: 1033

  Additional information 1: fd33

  More information 2: fd33f64d55d2d485ab8741c75380ddca

  3 more information: 75ca

  Additional information 4: 75ca94d43e4a591602d76b2e4fa9a045

  Additional information about the problem

  Bucket ID: 8af8b1bf66d9f408d866866de4f5f3b2 (120375896279)

  Hi adpremxxx,

  Greetings

  This crash log is for your Nik/Google selectivePalette plugin. To update or disable the Nik/Google plugins.

  You can also try to open PS while holding down the SHIFT key, click Yes at the prompt and see if that does the trick.

  Concerning

  Rohit

• NVIDIA Quadro K5200 not recognized!

  Probably a stupid question, but: I just moved from a position with a Nvidia Quadro K5000 to one with a Nvidia Quadro K5200.  I brought over several open projects, and when I open one of them, I get the message "this project last used with Mercury Playback Engine acceleration GPU (CUDA), which is not available on this system."  Mercury Playback Engine Software only will be used. "And when I go to project > settings > general, which is actually my only choice.  This is also true if I start a new project.  Device Manager confirms that the system recognizes the K5200, and for the evaluation of the graphics capabilities of the computer, the score is through the roof.   I don't remember having to do something special to have Premiere Pro recognized the K5000 on the old machine, it seemed just to be done automatically without having to install drivers, etc..  Is there something else I'm supposed to do to make this work?

  Running Premiere Pro CS6 with Windows 10.

  Never mind.  Found the hack on adding to cuda_supported_cards.txt.  I guess CS6 is not updated more supported cards, should have known that.