T610 - PERC H700 internal integrated

Similar Questions

• Batteria PERC H700 Poweredge T610 [MS]

  Buongiorno

  avrei need by UN nostro recent batteria del PERC H700 integrated su UN PowerEdge T610 Service TAG

  avrei need di one ' offer is there prima possibile procedere con the price by.

  Grazie

  Massimiliano

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  By the spedizione:
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società:
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• Add the disk to the PERC H700 of RAID integrated table 5

  Hi all.

  I have currently a Dell PowerEdge R710 configured with 4 SAS - 2 10 146 k Seagate 2.5 "drives in a Perc h700 integrated Bay RAID-5. I ordered a SAS-2 10 146 k disk Seagate 2.5 "to add to the Bay RAID-5 storage, making it a 5-disc set. What is the best way to add the drive to the RAID-5 array without losing any data? I have OpenManage Server Admin on the server.

  OS: Windows Server 2003 R2 32 BIT

  You can use OMSA... go in storage, PERC, virtual disks and select Reconfigure in the drop-down list of tasks available for your RAID 5.  This will add the disk to your RAID 5, then you will need to adjust the partitions in Windows once it is completed.

• PERC H700 integrated + 6 x SAS 6Gbps SSD = type of Non - SSD drive?

  Hi all

  I hope that something quick and easy...

  I installed a PERC H700 completely filled and integrated in a Dell R815 Server bays disc 6 x with 400 GB SAS 6 GB/s SSD drives. I created the virtual disk using the BIOS (Ctrl + R) boot utility, but when creating the data store, it shows that these types of readers Non - SSD.

  I'm missing a simple configuration or VIB, or should I just say to the host that it comes to SSD;

  VMware KB: Activation of the option SSD on based SSD disc/LUNS that are not detected as default SSD

  Thank you

  Jon

  I followed the article to identify the device as an SSD;

  ~ # esxcli storage device base list d naa.6b8ca3a0e79b9500194b56ec78ca4044

  NAA.6b8ca3a0e79b9500194b56ec78ca4044

  Full name: disk space from DELL (naa.6b8ca3a0e79b9500194b56ec78ca4044)

  Definable display name: true

  Size: 1142784

  Device type: Direct access

  Multichannel plugin: NMP

  Devfs Path: /vmfs/devices/disks/naa.6b8ca3a0e79b9500194b56ec78ca4044

  Seller: DELL

  Model: PERC H700

  Revision: 2.10

  SCSI level: 5

  Is nickname: false

  Status: on

  RDM Capable is: false

  Is Local: true

  Is removable: false

  SSD is: true

  Is Offline: false

  Is perpetually booked: false

  Thin Provisioning status: unknown

  Attached filters:

  VAAI status: unsupported

  Other UID: vml.02000000006b8ca3a0e79b9500194b56ec78ca4044504552432048

• Dell Power Edge R410 & Dell Perc H700 modular F2WGY

  Hi guys

  Need some advice please, a few weeks ago, we bought a Dell R410. This came with a modular 6/ir Perc. However, when we arrived at the installation of drives we noticed that the controller did not recognize disks larger than 2 TB. It's not good because we need to use 2 x 3 and 2 x 500 GB disks in a RAID 1 Configuration.

  After Googling autour, I came to the conclusion that the card that it came with the "Perc 6/ir' does not support disks larger than 2 TB.

  So, I advanced and bought a new modular a "Dell Perc H700 F2WGY" controller which apparently supports disks more great.

  the controller came yesterday so I removed the old Perc 6/ir controller from the slot in the bottom of the map editing and trendy "Dell Perc H700 F2WGY" modular at the same place. : Photo of slot, I inserted H700

  H700 card: see picture

  PERC 6/ir map: see picture

  Anyway, once I inserted the card and started, I was presented with the error; "PCIE training error" system HALT.

  Obviously this would not start any further. So I brought the wrong card? im confused at the moment between modular and integrated? the pcie slot is low for integrated only cards?

  I then add the new map on the PCIE Top slot. the system then started and he could see the card. However, it found no readers?

  What exactly I do bad will this card work at all? or I'm out of luck and need another card?

  Cappilio,

  The problem you are experiencing is due to the model of the H700. Map H700 modular version is actually designed for the blade server Poweredge series. The model that you would need is the H700i which is the version that is integrated, designed to go into the white storage controller slot you are talking about. The references are KK67X and CNXVV. The latest model of the H700 is the H700A which is the adapter, it's the model that is necessary for installation in a PCIe location.

  This link explains in detail in the overview H700 - http://www.dell.com/downloads/global/products/pvaul/en/perc-technical-guidebook.pdf

  Let me know if it helps.

• Help needed with two new HHD to RAID 1 PERC 6 / i integrated controller

  We have a client that has an out of warranty PowerEdge T610. On the Dell OpenManage Server Admin, I can see that he can see my 1 RAID PERC 6 / i integrated controller. On one of the controllers, we have a RAID 5 that has 4 discs dedicated to a data store (drive D), we two discs devoted to the Windows SBS 2008 (drive C) operating system on RAID 1.

  When we look at the server, I have physical disks located in:

  Our drive D data store:

  • 0:0:0
  • 0:0:1
  • 0:0:2
  • 0:0:3

  Our reader C found in:

  • 1:0:4
  • 1:0:5

  We just added two new hard drives for RAID 1 based on the conversation we had with Dell, they recommended that we can try from C data to the new larger disks. When to Dell Open Manage looking at the physical disks on the PERC 6 controller / i integrated, I can see that it has detected two new 500 GB SATA drives that the client installed. However the tasks available do not allow me nor their format to use as they appear in the management of the computer as a disk that is available for use. Is there something that we are completely absent here?

  Regarding the new disks located here:

  • 1:0:6
  • 1:0:7

  My options for available tasks are the following:

  • Blink
  • Unblink
  • Assign Global relief
  • Claire...

  I already have them deleted once as I didn't know if they should be formatted to be recognized, but in the computer management disk management they don't even appear at all. I thought that I had a task of 'on-line' that I could assign to the readers so maybe they appear to start to use the new storage HHD.

  With regard to the current firmware for the controller.

  • Firmware version: 6.2.0 - 0013
  • Driver version: 2.24.00.64
  • The Storport driver version: 6.0.6002.18005

  I have attached a PDF file to this post to view details on the disks. Sorry for the fine print, but it's a PDF so you should be able to zoom. Any assistance about why readers as not detected in disk management would be absolutely awesome. :)

  -Digity

  PERC does not support non RAID... you can just throw the discs and use them. You'll need to set up and initialize a new RAID array with the readers. It is not a task of "physical disk", therefore in OMSA, go to the page of the virtual disks and click the new link Wizard of VD at the top of the page to create a new VD of the BONE.

• PERC H700 driver during Windows Server 2012 r2 - disk Raid not recognized not

  Hello

  I try to install a r2 Windows Server 2012 to a Poweredge R710 with a Raid Perc H700. 2 HDD in Raid 1, but the HARD drive is not rcognized Italian Installation even if I try to use the 2008 r2 for the Perc Raid driver. They are listed, but if I select one disk HARD are not visible. What should do?

  Best regards...

  Grolle,

  Leave in the Raid Controller, what is the status of the table? In addition, was the raid 1 initialized after being created? If this isn't the case, then, who will have to be done before you try to install.

  If you download this and start on the lifecycle controller (F10) and then select deploy BONES, load these files there and proceed with the installation of the OS.

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=M5VGR&FILEID=3325059394&osCode=MWS80&ProductCode=PowerEdge-R710&LanguageCode=en&CategoryID=DD

  I would like to know how will install it.

• Battery on the Controller PERC 6 / i integrated Poweredge R900 and 2950.

  Hi, we have this error below Poweredge R900 and Poweredge 2950 for 4 days now, I hope that he will be gone after 7 days (such as by Maximum learning delay)

  Battery on the Controller PERC 6 / i integrated:

  Name battery 0
  Degraded state
  Loan of State capacity
  Learn the State duly
  Next time learn 0 hours
  Learn 7 days 0 hours maximum
  Learn the Auto Mode

  In case the error continues after 7 days, is there any solution to this? or replace the battery if error remains.

  I had been searching for the right part No. battery so that we can order in advance, thank you for giving the battery part No. for Poweredge R900 and 2950 Controller PERC 6 / i integrated.

  Thank you much in advance.

  concerning

  Rais info is stored on the discs should not be a problem

  R900 page 84 support.dell.com/.../XK9460D.pdf

  2950 page 74 support.dell.com/.../hom.pdf

• R410 Sostituzione con PERC H700 hard drive

  Supporto Gentile,

  If line a detailed by the sostituzione di un disco compatibile con quello hoist by R410 Server con controller perc h700

  Speaking Saluti

  Gianluca Ticconi

  Buongiorno, the sto contattando by mail

• batteria pe t610 - perc 6 / i - s/t J6SKZ4J

  Buon giorno,

  Come posso auswechseln batteria del only sul Server raid controller in questioned (pe t610 - perc 6 / i - s/t J6SKZ4J)?

  avrei need di one ' offer by the price della parte.

  Grazie 1000

  buongionro, sto contattando by mail.

• PERC H700 RAID 5, 3 disks, 1 Reporting failed and 1 predictive failure

  Hello:

  I have a PowerEdge T410 with a PERC H700, RAID 5 with 3 disks.  The controller reported a failed drive so I replaced the week last with a drive of new/refurbished.  Now only 1 week later it reported another drive has failed and the drive replaced as predictive failure.  Looks suspicious, i.e. I am doubting the controller card.

  I think updating the firmware of the controller first, but not sure if I should replace the faulty drive first, i.e. If updating the firmware could cause table failure.

  Also, if I install OpenManage on a virtual machine (host is ESXi 4.1), OM sees the controller?

  Thank you!

  Start on our live image and export logs of the OMSA facility there. http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=CWF92&FILEID=3550743303&osCode=WS8R2&ProductCode=PowerEdge-T410&LanguageCode=en&CategoryID=di

• HARD drive failure e battery perc h700 [CF]

  Buongiorno,

  e' possibile situation UN preventivo by a hard e batteria equal o compatibility disk?

  PERC H700

  DELL ST3600057SS 600 GB SAS hard drive

  Power edge R510 (service tag C3YGW4J

  Grazie

  Ramon Cartabia

  the sto contattando by mail.

• How to upgrade firmware PERC 6 / i integrated

  Dear support,

  I am new to Dell.

  I saw this message on

  OpenManage, under PERC 6 / i integrated (Embedded)/Firmware/driver versions
  Firmware virsion is obsolete.
  How can I go about updating the firmware from the outside

  Latest Version of the Firmware available	6.3.3 - 0002
  Driver version	4.05.01.64
  Version of the Storport driver	6.1.7601.17577

  Thank you very much

  zhoupingx

  Hello

  Setup instructions for all the updates that we provide are at the bottom of the download page:

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=F96NR&FILEID=3427527091&osCode=WS8R2&ProductCode=PowerEdge-R610&LanguageCode=en&CategoryID=SF

  There are other types of file available to update your system with. If the file above is not what you must then go to the driver and your system download page and select the options you want to get the file you need.

  Thank you

• Support for large hard drive PERC H700

  Nobody knows the biggest SATA drives supported by a PERC H700 in a PowerEdge R710? I read on another post that the H700 will support 3 TB disks. Would like to know whether he would support also 4 TB and disks of 6 TB.

  Thank you

  Simon

  Hello.

  I can see 4 TB SATA HD as supported but not 6 TB. It may be supported but not yet committed.

• PERC H700 adapter w / Cable X394K

  I am upgrading a PowerEdge T310 for a client that was originally shipped with a single HARD drive and no RAID controller (only one hard drive is connected to the mobo).

  I bought a Controller PERC H700 and the cable X394K and hung.  It doesn't seem like something to connect readers to food, with the exception of a connector 12 pin labeld "P3A.  But the server doesn't have a connector anywhere so that I can connect only.  The only thing available is a connector 8 pins on the socket.

  Is there an adapter cable to go from the 8 to 12 pins pins? Or do I need something else than the X394K cable, which provides the SATA data connector and power in a single molded unit?

  Please notify.

  Thank you!

  Hello

  The cable you have (X394K) is not designed for a T310. T310 cable with the right connector is Y690K.

  Thank you