table blink indicator

Similar Questions

• How do you return a blank in table 2, when there is no data in the cell related in table 1?

  I run a recreational League of golf and have been recording the scores of the players (50 + players in total) with the intention of maintaining a form of disability from the League.

  So far, I did most of the calculations manually in number. Recently, I have experimented using the Lookup function but have encountered a problem with the time where the player does not play this week.

  In table 1, where I do all scores record cel when they do not play is left blank. However, in table 2 than corresponding cel returns a 0... strikes completely out of whack handicaps.

  Here is what I used in table 2 for the information of table 1...  SEARCH (name, 2016 Stats::Table 1 $Last: $ name, 2016 Stats::Table 1::G44)

  I also tried to add an IF statement, but I have obviously not understood correctly as he said I tried to refer to a cel in the statement itself.

  Example of the disability Page in the table 2 list a 0 is returned in cel 6... which is then averaged in the cel of last second... namely the problem. The cel with the 6 in it is a formula that counts the number of moves played and see it 6 because it counts as a trick played 0. This shows the wrong average score of 65.666

  Them	A	78																						1	78
  Me	Me	80	75	81	0	81	77																	6	65.6666666666667	-10

  As it appears in table 1. indicating the total number of rounds played in 5 and returning the precise average score of 78.8

  Me

  Me

  80

  75

  81

  81

  77

  5

  78.8

  Hi pondball,

  (Could be my 'golf name' somedays)

  

  Formula in Handicap::B2 and filled to the bottom and right at Handicap::X4

  = IF (LOOKUP ($A, data: $A, Data::B)=0,"",LOOKUP($A,Data::$A,Data::B))))

  IF compared the results of the first SEARCH and if it is zero, returns an empty string. If the comparison returns FALSE, the second SEARCH is called, find and returns the result of zero. AVERAGE does not take into account all results of text, including the string NULL, a zero-length text value.

  COUNT (used in the column count the number of turns) also ignores the text values.

  4th place of disability shows one of the reasons for not using LOOKUP.

  SEARCH alwas accepts a "close fit" with the search value. 'near match' for RESEARCH is defined as 'the largest value equal or less than the value of the research', and for the values text, "less than or equal" can be described as "identical or come forward in a list of items of text in alphabetical order.»

  For us, the other two values in the name list are 'less' us and the most important is 'Them', the values for 'Them' are returned.

  For this reason, I tend to use VLOOKUP instead of RESEARCH in many cases.

  VLOOKUP present the disadvantage of requiring her research-where location which will be the first column of the lookup table (which is not a problem here, because the location of the research is one ot the column data table).

  But also has the advantage of af being able to require an "exact match" search value.

  Here's the same tables of two, with VLOOKUP replacing LOOKUP. Note that the VLOOKUP function has a different syntax than the LOOKUP function.

  

  Formula VLOOKUP in Handicap::B2, filled with verse down and right at Handicap::X4:

  = IF (VLOOKUP ($A, Data: $A:$ X, COLUMN (), FALSE) = 0,"", VLOOKUP ($A, Data: $A:$ X, COLUMN (), FALSE) ")

  Written as above, the formula works correctly in rows 2 and 3, but will just return the error in the 4th row triangles, since it will not find a match (exact n) for 'Us' in column A of data.

  After confirming that it produces no unexpected error, wrap the formula in function SIERREUR as shown below and repeat the filling down and the right filling operations above.

  SIERREUR function interrupt all errors, including those affecting the results without your knowledge if they occur. Always delay adding IFERROR until you know what are the errors he fools.

  =IFERROR (IF (VLOOKUP ($A, data: $A:$ X, COLUMN (), FALSE) = 0,' ", VLOOKUP ($A, data: $A:$ X, COLUMN (), F ALSE))," ")

  Y2: = COUNT (C2:X 2)

  Z2: = AVERAGE(C2:X2) (base form)

  Z2: = IF (Y = 0,' ", AVERAGE (C2:X 2)) (real form)

  The encapsulation of the AVERAGE function in the IF statement deletes the calculation if the number of items to the average value is zero, AVERAGE preventing from return to a division by zero error. The number of circles in the column there is NOT used in the calculation of the average (AVERAGE did his own count), but is used as a switch 'OK to calculate' leaving the calculation of the AVERAGE to move forward.

  Kind regards

  Barry

• Help with the cluster in table for the cluster size difference, please!

  I will admit to still hurt with the berries of LabVIEW, and as usual, the behavior in the vi attached is meaningless to me!  The attached vi shows a cluster 6 element being converted into a table, then immediately to a cluster.  The reconstructed cluster has 9 elements, even if the table size indicator display properly 6.  How to maintain the initial cluster size when converting to and then since then, a table?

  The f

  Well, if you have worked with context-sensitive help running you would see:

  "With the right button of the function and select the Size of Cluster in the context menu to set the number of items in the cluster."

  The default is new. The maximum cluster size for this function is 256. »

  You must set the size. There is no way for the function to know how many elements in the table.

• Node property of a control inside the cluster within a table

  I created a control that has a cluster to a Boolean, a string, and a digital.  Then, in my front, I created a table of these custom controls.  I wish I had access to the property of the controls inside the cluster in the table.  That is to say, I want to change the color of the Boolean or blinking, or "disable and gray" text box.  I think I'm on the right track, or maybe I'm on the wrong track.  I joined and example VI (testtray.vi) and control that I use (UUT_Display.ctl).  Please excuse the use of a flat Structure of the sequence, I know it is bad programming practices, but I just wanted to throw something together.

  Any help would be appreciated.

  Kevin

  Items in a table can have different values, BUT each element of the table share the same properties.

  "Blink" is a property when you make one in tha table blink you will all Flash.

  This restriction does not apply to clusters.

  So in theory, you could develop an XControl that has a data type is an array, but the display is actually a cluster that resembles a table. But write an XControl is not a trivial task.

  Ben

• Boot problem - code blink?

  Hello

  I'm new here so apologies if I have not found one already answered about.

  I have a HP dv7 laptop (model 17.3 "2009) and when have pulled up the screen is empty (not yet turned on), the NumLock & caps lock flash simultaneously and continuously at an interval of approximately 3 seconds. I read up on the "hp blinking codes", but as I interpret it, none of them don't apply to me...

  My understanding is that there should be a number of flashes/beeps then they must stop, and, if you want the phone to repeat the code to push the power button...

  Is there an any code of default for this, or even a will?

  Thank you

  Chris

  Hey Christopher-B,.

  Unfortunately, it seems that this could be the crackling 1 blink indicating a processor failure. The model 1 blink is just as you described: Blink, pause, pause, blink, blink, pause and so on. You may have already encountered this document on blink codes before, but it will give you more information on this issue.

  Your computer never boots up correctly, or you get the code flashes each time? If this happens every time, it is possible that the processor just needs to be reinstalled. Most likely, it must be replaced.

  Let me know if you have any questions!

• Referring to clips using a table

  Hello

  I am currently working on a game, but I have a problem with the clip based on which key has been pressed switching. I just started the code so I'm only on the basic principles for the moment and don't forget that I'm new to Flash so I apologize for stupid fouls.

  What I try to do is to obtain the (Shu) character to move around using WASD, however according to on what direction he's going in, I want the clip to be transformed into a different image of Shu. I use three different functions:

  -moveShu (increase of Shu x & y coords for him to move)

  Move the Shu (SF)

  function moveShu(): void {}

  If (dir == 'up' & & SF.y > 0) {}

  SF.y-= 3;

  }

  If (dir == 'left' & & SF.x > 0) {}

  SF.x-= 3;

  }

  If (dir == 'down' & & SF.y < 400) {}

  SF.y += 3;

  }

  If (dir == 'right' & & SF.x < 550) {}

  SF.x += 3;

  }

  }

  -dFun (gives just a string of what arrow key was pressed, for example, 'left', 'up')

  -uFun (interrupts the movement is more in touch)

  My problem is that if I am moving the clip (and therefore will have another name of variable instead of SF), the moveShu function will no longer work. I considered just remove SF and his replacement with the clip, I would like, before increasing the item x or y coords, but then I realized the & & SF.y will not work for the new movie clip.

  If (dir == 'down' & & SF.y < 400) {}

  SF.y += 3;

  }

  I can't get rid of the SF.y < 400 coords because it prevents the Shu (or the clip I replace with) to run right off the stage, so I think now that I need a table where I can enter all movie clips I want to use and do:

  If (dir == 'down' & & shuArray [i] there are 400) {}

  There shuArray [i]= 3;

  }

  I don't really know how to identify objects in a table without indicating exactly the one I want, but I used 'I', as a number of previous codes, I learned in class, that's why I think that tables may be my answer.

  Again, please excuse me for something obvious that I neglected, but what I need is a way to refer to objects in a table in general without having to state that an exact. One last thing to note is that there always will be a "Shu" or a character on the stage at the same time, is not as if I'll leave all the clips of film on the scene at a time.

  Thanks for any help! ^^

  In frame 20, you could put once again to gotoAndPlay (14);

• display / hide column of the table running

  Are there known issues with display / hide a column of the table at run time?

  I have a table that contains a column with a check box and another with a radio button.  If the user is allowed to select more than one row in the table (as indicated by a form variable), then I want to hide the column of radio and checkbox column.  If not, I want to show / hide the contrary.

  I show / hide the column header too.  When I preview the form, however, the data in the table appears "scoot" left and placed in the column that is hidden, so to speak.

  Here is a view of the design of the table:

  

  And a view of the execution of the table.  You can see the radio is hidden, but the "account number" column wants to crush in the (hidden) radio column,

  

  Here is the script, I'm very confident in this small snippet of code because the lines of account were filling wonderfully until I added the column of radio buttons and the script to show/hide.

  Put the account data in the table

  function

  setAccountData (objAccountRow, objAccountItem) //Pass in the line and data to complete line

  {

  stuff the line

  objAccountRow.accountNumber.rawValue

  = objAccountItem.accountNumber;

  objAccountRow.accountName.rawValue

  = objAccountItem.accountName;

  objAccountRow.accountBalance.rawValue

  = objAccountItem.accountBalance;

  display the check box or radio button, depending on the number of accounts they are allowed to select (as specified by the form variable)

  var searchNumAccounts = objFragment.resolveNode("searchNumAccounts").value; Variable //Form

      if (searchNumAccounts==1)

  { //show the column of radio buttons and hide the checkbox column }

  hideObject (objResultsSubform.accounts.HeaderRow.txtSelect);   <-it's exaggerated here, to hide the table for each row header column,...

  hideObject (objAccountRow.accountSelected);

  showObject (objResultsSubform.accounts.HeaderRow.txtRadioSelect);

  showObject (objAccountRow.radioSubform.radioGroup.selected);

  }

  on the other

  { //show the checkbox column and hide the column of radio }

  hideObject (objResultsSubform.accounts.HeaderRow.txtRadioSelect);

  hideObject (objAccountRow.radioSubform.radioGroup.selected);

  showObject (objResultsSubform.accounts.HeaderRow.txtSelect);

  showObject (objAccountRow.accountSelected);

  }

  }

  OK I got it. The table object implements a container to contain the fields. You hid the ok fields, but you then never reset the row in the table to have only two columns. I copied the parameter of the XML source so that I would have the exact width and then deleted the one I wanted to hide. Now everything works fine.

  See the example updated the.

  Paul

• Removes the table causing a lot of disk reads

  Until recently that we hadn't made many deletions on one of our large tables in the comic book. After a recent project has been implemented, system performance has gone downhill a bit. Research in one of the top offenders through v$ sql, we find this:
  
  REMOVE IRQ INSPECTION_REQUEST WHERE WORK_ORDER_SEQ =: B1 AND SEQUENCE_ID IN (SELECT SEQUENCE_ID FROM (SELECT SEQUENCE_ID, CHAR_VALUE FROM INSPECTION_REQUEST_CHAR WHERE WORK_ORDER_SEQ =: B1) X WHERE THE CHAR_VALUE IS NULL).
  
  Here are some stats I see in table v$ sql:
  
  Performances: 4
  Analyze the calls: 4
  Disk reads: 565457
  Gets the buffer: 634626
  Time CPU: 69280000
  Elapsed time: 290015297
  
  If I read this correctly 100 000 disk reads are performed on average whenever this statement is executed. The situation that I am is that the table we are trying to remove from has not been analyzed in almost 2 years and many of the indexes on the table have not been analysed in more than a year. Is my problem here something to do with the fact that this analysis has not been done or is there something else, I'm missing?
  
  We checked the SQL to use the correct index and it is set to perform at its best. We have also tried to run this in our dev environment, and we have the same problem with the slow delete. We even watched the rowid for a row we try to delete and tried to delete by the rowid and the DB is still thousands of readings of the disk to perform this deletion. Our dev table and all the clues have been analyzed recently (last month or almost).
  
  So maybe it takes away the possibility that the absence of analysis of the tables and indices of production contributing to the issue. At this point, I am at a loss. Here is the statistical information for this table in the production.
  
  Parameter, value
  Size in MB, 20464.00
  Numbers Extents, 1279
  Size in bytes, 21458059264
  
  TABLE_NAME, INSPECTION_REQUEST
  NOM_TABLESPACE, DATA_LARGE_2
  CLUSTER_NAME,
  IOT_NAME,
  PCT_FREE, 10
  PCT_USED,
  INI_TRANS, 1
  MAX_TRANS, 255
  INITIAL_EXTENT, 1048576000
  NEXT_EXTENT, 16777216
  MIN_EXTENTS, 1
  MAX_EXTENTS, 2147483645
  PCT_INCREASE, 0
  FREELISTS,
  FREELIST_GROUPS,
  LOGGING, YES
  BACKED_UP, N
  NUM_ROWS, 18095357
  BLOCKS, 1196456
  EMPTY_BLOCKS, 0
  AVG_SPACE, 0
  CHAIN_CNT, 0
  AVG_ROW_LEN, 485
  AVG_SPACE_FREELIST_BLOCKS, 0
  NUM_FREELIST_BLOCKS, 0
  DEGREE, 1
  CASE 1
  MEMORY CACHE, N
  TABLE_LOCK, ENABLED
  SAMPLE_SIZE, 18095357
  LAST_ANALYZED, 2007-04-01 06:41:24
  PARTITIONED, NO.
  IOT_TYPE,
  TEMPORARY, N
  SECONDARY, N
  NESTED, DON'T
  USER_TABLES, DEFAULT
  ROW_MOVEMENT, DISABLED
  GLOBAL_STATS, YES
  USER_STATS, NO.
  DURATION,
  SKIP_CORRUPT, DISABLED
  SURVEILLANCE, NO.
  CLUSTER_OWNER,
  ADDICTIONS, DISABILITIES
  COMPRESSION DISABLED

  user9539428 wrote:

  delete from inspection_request where sequence_id = 9911147198;

  SEQUENCE_ID is the primary key on the table INSPECTION_REQUEST. This only delete statement performs 7 000 disk reads. Is this normal? We have this problem even if it is disable triggers that would fire following this statement.

  To everyone who looks at the thread, the version of db, on that we are is 9.2.0.8.

  If you have verified that all triggers are actually disabled on the table, there are a few potential candidates that could cause this large amount of activity during the removal of a single line:

  * Enabled foreign keys referencing this table
  * Maintenance of Index, your index finger on the table could be degenerate and could benefit from an operation of "merge".
  * Bugs in SAMS if you use a tablespace locally managed with automatic management of the space for indexes

  You can follow this thread that might have similar problems:

  Ellapsed time too tkprof output

  Try to run the simple removal using SQL trace enabled (Event 10046) scopes as described in the above thread. After the release of "tkprof" of the trace file generated here, as described in the following thread: [when your query takes too long | http://forums.oracle.com/forums/thread.jspa?threadID=501834]

  Kind regards
  Randolf

  Oracle related blog stuff:
  http://Oracle-Randolf.blogspot.com/

  SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
  http://www.sqltools-plusplus.org:7676 /.
  http://sourceforge.NET/projects/SQLT-pp/

• Something is downloading when I open Firefox.

  When I open Firefox, I noticed that the download icon will blink, indicating that something has downloaded. Nothing appears in the download folder. This activity seems to be new. I noticed only recently. Apart from the Firefox start page, the other one tab opened from the beginning is Google News.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• Satellite M100 - screen remains black after sleep/wake

  I just installed Windows Vista Ultimate on my Satellite M100 series.

  Everything works fine, but when the pc is forced into sleep/standby or it automatically goes into sleep/standby mode depending on the time of inactivity in the power settings could not be restored sleep/wake without turn off and restart.

  The blue button is orange and blinking indicating sleep/standby mode. When you press it again, it turns blue and the fan turns on. But there is no display and no response. The only option is to go to market.

  Help, please

  Hello

  What BIOS updated to the latest version?

• Battery does not charge, but by Satellite Pro L510 is running in battery mode

  Hi, I had a few odd battery problems these days:

  I had charged my laptop completely to 100% and then used it on the train on my way home (in Windows 7 64-bit), how I got it to about 70%, shut down normally, put it in my bag and left there until I got home. When I got home, I tried to turn it on but it lights and battery light orange blinking indicating that there can be no charge. I plugged it in and it worked as usual (Linux), so don't think too hard on this subject.

  Later I realized that the battery was still the load after longer that it should have been and running the acpi + (linux) command told me has the battery + charge, 0%, charge at the zero rate - will never fully charge. + I disconnected to see if it worked, and the battery lasted as usual, although always it's 0% charge rate.

  I started in Windows 7, and the battery reported that it was at 68%, so I assumed it was back to normal. A while later, I noticed that he was still 68%, despite having connected for a while - at least an hour. Start on linux, acpi showed data battery normal search, except that it was 'blocked' to 68%.

  I disconnected the laptop and run it as usual, and it ran until he cut; I guess with him out of power. I plugged it back in and it is 'charge' again, even if it is still 0% battery and "load at the zero rate".

  Before all this happened, the battery works well - apparently to 94% of its capacity. It would be modified for a few hours unplugged play movies or games.

  Summary: PC laptop battery suddenly going to works "attributed to the zero rate" and 0% complete; battery still seems to work very well, seems fresh and portable no power plugged in but the battery is not 'charging' or have his percentage of charge remaining increase.

  Someone at - it ideas? I have yet to try a BIOS update, but it seems that there is one available, so I will give that a try. I feel that the problem is not the battery as the battery controller, so I don't want to invest in a new battery without knowing it, the problem will be solved.

  Thank you!

  Hello

  I think you should try upgrading the BIOS
  BIOS default value, and then try to charge the battery again.

  > get the impression, the problem is not the battery as the battery controller, so I don't want to invest in a new battery without knowing it, the problem will be solved.
  Well, it of really difficult to tell if the battery or the mobo may be affected
  In my opinion, the battery must be tested without a doubt

• Powerline 500 XAVB5421 units communicate is not between them

  So I recently bought the Powerline 500 XAVB5421 so that I can get an internet connection in a room upstairs for a new PC, I built. I plugged everything accordingly and all 3 lights are green fixed. However, on the new PC I built (running Windows 10) it says there is no connection and no connection is available. After reviewing the instructions for units of current carrier online, I discovered that the far right LED (Pick-A-Plug) should blink, indicating that the 2 units communicate with each other. They have never blinked for me and still won't blink. I looked around solutions, but most of them were not the same problem, or for a completely different model. I tried to hit both secure button to see if they would be in contact with each other despite the lights blinks not, but no luck. I also tried a factory reset on both models, but never got the blinker. The current configuration is the following: a router with a cable to the unit of current carrier online (plugged directly into a wall outlet) and the other unit upstairs, with an ethernet running on my computer. Any help would be appreciated!

  Update: I've decided that the issue was with the motherboard on my PC. After updating the drivers everything works perfectly.

• New remote for Gen 3 apple TV will not pair

  Hello all,.

  I picked up new remote control for my gen 3 Apple TV on the Apple Store.   I followed the instructions by pressing the button MENU and the RIGHT directing on the Apple TV at point-blank range.  The LED on the Apple TV blinked his eyes quickly and nothing.  I don't have the symbol of the instructions says to wait.

  When I press a button on the remote, the LED will blink, indicating the signal, but the Apple TV does not.

  I tried to unplug and re - plug Apple TV

  Kind regards

  Jeff

  Have you tried to do a factory reset on your ATV?

• How to optimize the speed of execution of a specific piece of code?

  Is there a structure that can encapsulate the code to make the code have absolute priority when the code is executed?

  Thank you

  Set property "reporter Panel" updates on the front panel of the VI true before the beginning of your code, and set it to false afterwards. This should stop the table blinking when you disable and change the color and will considerably speed up updates.

  Here is an example:

  

• County Boolean buttons clustered to array

  I'm trying to find a way to have a table output indicating which key depending on which buttons is pushed in a Boolean cluster of buttons.

  Essentially if the first button is pressed, the output table would have a value of 1.  If the first button is pressed and the 9th and 10th key, then the output array would be 1, 9 and 10... so on a so forth.

  I have attached my .VI with the Group of buttons this output in a table which shows the Boolean value (1 or 0)... but this isn't quite what I am willing to do.

  Any suggestion would be appreciated.

  Something like that?