Tablet & double score does not work on Tecra S1

Similar Questions

• Touchpad not working not - corner double tap does not work - no yellow light

  I have a Folio 9470 m.

  My touchpad does not work.

  The tip of the double tap does not work.

  The yellow light is not on.

  Someone at - it help him?

  Press the power button and then immediately press the ESC key to call the start menu.

  In the boot menu, press the F2 key to enter the PC Diagnostics.

  Select the component tests , then the mouse. Run the test. If she passes the test then the touchpad is fine and all that should be required is reinstall the driver for the touchpad. You can download the software from your support of the ultrabook Portal in the download section. Download and install the appropriate version of the operating system.

  If the led on the touchpad of orange does not illuminate, the touchpad is enabled. Amber led on the means, the touchpad is disabled, disabled.

• Re: Sound does not work on Tecra M10

  Hi all

  I have a Tecra M10 with XP and all the drivers installed, but sound does not work.

  I checked the Device Manager and everything is fine, no red cross or whatever it is on the driver realtek audio.

  Everything on the sound properties. I even uninstalled and downloaded the audio driver from the toshiba site again but still no sound and no mistake.
  Can someone help out here?

  Thank you.

  Hello!

  The sound is turned off on your laptop? With the FN + ESC key combination you can enable/disable it.
  Check it!

  In addition to the high definition audio devices you need two patches from Microsoft to go looking for the proper functioning. Have you installed the two?
  Here are the links to the Microsoft Knowledge Base where you can download both:
  http://support.Microsoft.com/kb/835221
  http://support.Microsoft.com/kb/888111

  Good bye

• Video output port does not work on Tecra 8000

  My Toshiba Tecra 8000 screen has cracked and I realized this was a video output port, but it does not work.

  Can someone help me?

  Hello

  What video output port can you hear? The VGA port or the output port RCA-video? In both cases, the external display you seek, should give a picture.
  If this isn't the case, it should at least be configurable in windows.

  Please specify your question and tell more details on exactly what you want.

  Welcome them

• HP Pavilion G6 2117EO: my laptop to see themselves as the other model than him. + Double graph does not work

  Hello.

  I have a few funny probem.

  So my laptop see itself as one"

  Laptop HP Pavilion g6-2214so"[BIOS]

  While under battery prepares his model: G6 2117EO

  + Graphics card does not work. [Windows do not see same second graphics [0 unknown devices]]

  In the Bios, I don't see any option with double graph [it could be the reason for this bios]

  So can I somehow fix it?

  As force install old bios G6 2117eo?

  Greetings!

  What you see is compatible with the laptop being in reality a g6-2214so... model which only joined the video while the g6-2117eo switchable video dedicated. It would seem that someone put a g6-2214so inside a g7-2117eo chassis motherboard. BIOS is not the problem. He cannot do with material that does not exist.

• S-Video port does not work on Tecra M5

  Hello. S-Video on my laptop M5 port does not work. I checked everything Svideo cable, TV and also the drivers. Everything works fine. Could you advise me please? How can BTW, I check the Svideo port?

  Hello

  There is not much to do
  (1) Please make sure you use a S-video S-video cable and connect it to the TV
  (2) turn on the S-video TV port - VERY IMPORTANT
  (3) use the FN + F5 key combination to switch to TV

  All that s!

• Satellite L - Double tapping does not work

  You have a new problem with my touchpad.

  I can move pointer around the screen very well, but when it comes to double tapping to open something, is not, and I have to press the left button.
  Is it possible to fall somehow the settings so that it stops working?

  Hello!

  What laptop Satellite L do you have?

  Works for the normal tapping function? I mean you can open the start menu with the touchpad?

  Normally, you can change the touchpad settings in Control Panel > mouse.
  There you can an option called Double click speed. If a folder does not open or close, try using a slower setting.
  Moreover, I will try to update the driver for the touchpad. You can find it on the page of Toshiba Europe.

  Good bye

• Windows ME does not work on Tecra M3?

  Hi there I just bought a new laptop, it seems to be an older model Tecra M3 (PTM30U-OE8017, I can't find this anywhere model number on this page or other sites Web of Toshiba, I was wondering if someone could also help with recognition product. This is what I bought http://www.factorydirect.ca/catalog/clearance/clea_product_spec.php?pcode=TO0163)

  I thought that the computer would have accompanied the XP disc (see announcement), the guy at the counter told me he didn't and I had to get the disc. It seemed legal and I really thought I was too buy the OS. I know not if only to have the sticker on the bottom of the computer laptop valid me go and get a copy of XP around now and install it.

  So now that im trying to install Windows me that I have a copy of from one computer, I bought before, installation went well, however, in the last step it seemed just to stop and I had to reset manually.

  Now windows only loads in safe mode, I am a student with a budget and right now don't want to buy a new version of XP/7, the site does not list drivers for WinME, does that mean its not supported?

  Hello

  This Tecra notebook was designed for Windows XP Home edition. WME has been used on old books and for a short time and it is certainly not taken in charge for this model of laptop. So forget it.

  What you need is Windows XP Home edition Professional. Product key inside has nothing to do with the OS to install. This old Tecra initially shipped with preinstalled operating system and product keys belongs to this original recovery image.

  Bet you can do now is to install own WXP and more later all the drivers, tools and utilities.
  This model of laptop US?
  What is the name of the exact model (M3 - xxx)?

• Does not work on Tecra A2 - FN or key how to switch to the external display?

  Hello

  Tomorrow (Saturday 6) I have to show a little presentation my Tecra A2 on an external display or projector.
  After that I have to install my laptop for the second time last month, the Fn or function keys do not work.
  With this problem I don't know how to work with the external display.

  Please can you advice?
  Sorry for my English at low altitude.

  Buist huh
  The Netherlands

  @J.Verberk
  Sounds you're a newbie and you're talking nonsence
  You comment is simply not qualified.

  @Hein
  You said that you have installed you mobile again. Did you use the Tosh recovery CD?
  If this isn't the case, I think this might be a reason for the FN key anomaly.
  After recovery use the laptop must switch with FN + F5 external peripheral connected to the laptop.
  If you use try beamer to turn the trap settings.

• Double click does not work

  Hello community,

  Double-click no longer works.

  I tried the suggestions from the user to slow the speed of the pursuit.

  I have logged in safe mode and noticed when I am in guest mode, double click works, but not in my user account.

  Where should I go from here? It seems apparent to something in my settings of the user.

  Thank you!

  10.9.5 OSX

  System Preferences > Trackpad Point & Click

  Uncheck and recheck the boxes next to all the items listed.

  Best.

• SD card does not work on Tecra A9

  Hello

  The * SD reader * does not appear on ' * Workstation ' * until I have insert a * SD *.
  It appears so. However, when I try to * read * it I get the message ' * insert disc in drive E:'*.

  Someone at - he encountered this before?

  Thank you

  John

  Hello

  > The SD reader does not appear on ' * Workstation ' * until I have inserted an SD card.
  This is nothing unusual. I'm also putting t have the SD card reader in my computer until I insert an SD card.

  In your case I would recommend checking if your SD card is compatible with the SD card reader. As far as I know not all sizes are supported. In addition, check if the SD card is not too bad.
  Last but not Lea if it s possible and then format the SD card first and then insert it.

  PS: You can also reinstall the driver from SD card. First remove the SD drive from Device Manager, and then reinstall the driver.

  Good bye

• External monitor does not work with Tecra M Series

  Hello

  I'm trying to connect to an external monitor, however it is not working properly. The monitor works fine with another laptop so I know that the monitor is ok.

  When I first start the lptop I get the screen then I XP Flash on the external monitor perfectly clearly, however when it will boot Windows XP the external monitor goes haywire.

  Advice/suggestions would be appreciated.

  Either way, I just updgraded all display drivers and BIOS but with no solution to the problem.

  Thank you very much in advance for all help/tips.

  King Tony

  Hi mate,

  my suggestion is to reduce the resolution for the external montor. Maybe you have the problem that the resolution and frequency h/v is not defined as it should be.

  When starting your laptop, then let the disconnected monitor. When the machine is running, then connect the monitor to the machine (it s OK, it s not dangerous or something) and then go into the control panel for the graphics card. There you can set the options for internal and external monitor.

  Set the minimum resolution for the outside and try to activate him. It should work normally...

  Please tell me, what kind of machine do you have? You need to give more information, so maybe other people with the same machine can help you.

  Welcome them

• Usb PCMCIA controller does not work with Tecra 8200

  Hello

  I have an old laptop TECRA 8200 (Intel Pentium III, 847 MHz, 512 MB of RAM) OS: WIN XP with the latest patches. Because there is no USB 2.0 I bought a PCMCIA USB Controller (NEC Chip). The controller acknowledged, but XP is asking for a driver. The controller has not been delivered with a driver.

  Does anyone has an idea how I could get the operational controller.

  Thank you

  concerning

  Fred

  I mean, independent because this isn't really a toshiba associated problem, could you please put the name of the PCMCIA USB device?
  I mean the manufacturer or something because if XP asks you a driver there should be one available, or?

  Please, give feedback and what you could also do is to google for the PCMCIA device. The best way is often looking for the chip (in your case, NEC).

  Concerning

• Jet 7: Stream 7 Double click does not work in the program

  Hello

  I just bought a 7 run 8.1 flow win specifically for Ham Radio software that decodes the digital signals of my radio. The program that I am running is WSJT ver 1.5.

  The question I have is that double tap/double click in this software seems to be disabled. I tried to change the compatibility of the program to Win XP, Win 7, etc, but it makes no difference. I've updated the drivers, once again no difference.

  The software works fine on Win 8 and 10 to win on two laptops that I have access to

  I have someone has any ideas I can try, I'd be very grateful.

  Thanks in advance.

  Touch screen double click the work fine in Windows?  I have 10 Windows installed on my Stream 7, if I click once on the Recycle Bin on my desktop it highlights it.  If I double-click on it, it opens. There is the double click speed setting in the mouse settings also where you can test.  If it works with Windows, but not this software, you can check with the Publisher of the software?

• Windows XP - double click does not work on the desktop icons

  Hi all

  I have a really strange and weird problem!

  My brother-in-law put me back is equipped with all the malware as possible you can imagine... Virus, Trojan, Adware, Rootkit horse... etc.

  A collection of all the wicked thing you can collect on the web today!

  I clean everything with the help of several antivirus and UBCD4win, reinstall a new and up-to-date antivirus and a firewall and everything seems to be clean now after 2 days of work

  I have just one strange thing. When I double-click on any shortcut for the program on the desktop, it starts more software!

  Same thing on the menu!

  But if I double-click 'My Computer' or another icon of system on the desktop, it works as expected!

  On the shortcut for the program, if I did a right click and select it 'open' it works

  I checked the option mouse, everything seems ok, I tried to create a new user on the machine, but it works the same way!

  Something strange also and can be connected, when I press "Windows key + E" to launch the Explorer, it works or...

  The simplest solution would be to re - install windows XP, but I really prefer to avoid

  Does anyone have a suggestion/idea (good)?

  Thanks in advance for your help

  ericc

  I answer to myself :-)

  I solve my problem by going back to the old system restore point!

  I had to reinstall/uninstall an application, but now double click works well

  ericc