Satellite L - Double tapping does not work

Similar Questions

• Touchpad not working not - corner double tap does not work - no yellow light

  I have a Folio 9470 m.

  My touchpad does not work.

  The tip of the double tap does not work.

  The yellow light is not on.

  Someone at - it help him?

  Press the power button and then immediately press the ESC key to call the start menu.

  In the boot menu, press the F2 key to enter the PC Diagnostics.

  Select the component tests , then the mouse. Run the test. If she passes the test then the touchpad is fine and all that should be required is reinstall the driver for the touchpad. You can download the software from your support of the ultrabook Portal in the download section. Download and install the appropriate version of the operating system.

  If the led on the touchpad of orange does not illuminate, the touchpad is enabled. Amber led on the means, the touchpad is disabled, disabled.

• Why double tapping does not work on windows message pad 10 insatallation.

  I'm having a problem with trackpad after installation of windows through boot camp 10. Double tapping no longer instead of double click I want to use the left/right click to open a folder or a link.

  can someone help me?

  It works correctly on the side of OS X? Are BC drivers installed? What year/model is your Mac?

• DV7-3135: Synaptics Touchpad two fingers scrolling, scroll one finger and double tap does not work

  Clean the OS installed, Synaptics driver installed via Windows Update.

  V19.0.12.95 Synaptics pointing device

  also will not save settings after restart.

  UPD: I discovered that my touchpad doesn't support 2 + finger touch.

  I installed an old driver synaptics. now a finger scrolling works very well. but you know... No tap/rightclick 2 fingers... I didn't know this touchpad so badly.

  What happens if you use old driver for Win 7? Not sure what exact model you have: http://support.hp.com/ee-en/drivers/selfservice/identify?q=dv7-3135&tool=s-002#Z7_3054ICK0K8UDA0AQC11TA930O2

  Of course, you must also disable automatic driver update.

• C50-A0121 satellite: my tape does not work in libraries

  Hello

  Please, you can try help me...

  In libraries that my tape does not work, the layout allow me to make changes, the right click does not work when I want to select one of the options

  I know that may sound blonde for a GAL to ask but PLEASE help

  Thank you

  Yve

  Sorry, but your message and the problem is not quite understandable.

  Could you please post the laptop model and the system you are using?
  Please explain exactly (very detailed) what's the matter with your laptop!

• Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Hello

  Check with Toshiba support, online documentation and drivers (update or reinstall), and
  ask in their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  How to activate Audio devices hidden in Vista and Windows 7
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer (you want to be sure
  the mic input is enabled)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  -----------------------------------------------------------------------------------------------------------------

  Pilots may also need to be updated:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
  Audio (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

• Satellite A10 S203: sound does not work - just enough

  Hello!

  To my satellite A10 S203 sound does not work, I updated my sound card and the bios but nodifferents. Nothing in the system that says that I have something wrong whith my sound is just enough. I tried speakers headphones and challenging systemsounds, mp3, Auidi direct works cd... nothing.

  Any tip?
  [email protected]

  First check the status of the sound card in Device Manager.
  If there is a yellow climbing brand then you should try to reinstall the driver. (first remove it and after reboot, install a new)

  Have you checked the volume setting and the site of laptop? Eventually he s a very simple idea, but believe me, I read many comments here in the forum and a lot of guys forget this option simply.

• Satellite L300 (PSLB8C-0H901X) does not work

  My laptop Toshiba Satellite L300 PSLB8C-0H901X, does not work, no power, no MESSAGE, nothing, lamp power and charge Get when pluged into anything else, any known issues? All the fixes, thank you in advance for your help.

  Of course, your laptop is completely dead. In such situation, there is no magic solution and I m afraid that you need professional help. If there is absolutely no reaction is maybe defective electronic power supply and the motherboard must be exchanged.

  As you know this is part more expensive so you need to check if this is the solution for you.
  Call, explain the situation and let it check your laptop.

• Satellite A500 - 14Q - Microphone does not work

  I have the Toshiba satellite A500 - 14Q for about 3 years. I changed the hard drive, keyboard, frame of the monitor until now, and I'm sick and tired of this laptop does not properly. Now, I've discovered that my microphone does not work. There is no problem in device, or with the driver manager. I hear that crackling noise when I try to enter any other micro device.

  Can anyone help please?

  P. S. I have windows 7 (64-bit)

  How did you test the mic feature? With the help of tool tape recorder?
  > the monitor framework
  Perhaps you have made a mistake and mic is not connected correctly. Did you do it alone or it was done by the Toshiba authorized service provider?

• Satellite L40 - 18W - Touchpad does not work

  Hey guys...

  I have Toshiba Satellite L40 - 18W, bought in the Middle East, and unfortunately its touchpad does not work... I checked and double checked all the possible places, so anything that is disabled or misconfigured but found nothing.

  As there are quite a few errors in the operating system I formatted my hard drive and install WXP Prof, installed all the drivers, but the touchpad is not always works. I'm very confused as before and after formatting the pointer moves a little when I use the touch pad at the beginning of the UPA start? ¦

  Help, please...

  The best audit is to install the operating system with the original Toshiba recovery image and test it with the factory settings. In this case touchpad should work fine. Otherwise, contact the service and leave check your laptop.

  Sorry, but I don't see another solution for you.

• Satellite U920T - function keys does not work after update to Win 10

  Hello, good morning / evening...

  I use (U920T satellite) and recently updated my Windows 10 Tablet
  but after that, the function keys, volume, brightness, key FN and even the backlight does not work anymore!

  I tried to restore the system and update the driver software but nothing has worked...

  I use these keyboard shortcuts all the time and now it's really hard without them!

  What is the problem? What should I do?

  The problem is that U920T satellite is not listed as Win 10 support unit and, therefore, drivers earn 10 Toshiba and software that controls the FN keys is not released.
  But as far as I know using the FN keys, system of Toshiba and the Support of Flash Card Utility driver must be installed.

  For all Toshiba units win 10 supported, the drivers can be downloaded from this page:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  Maybe you can try the drivers released for other models of portable Win 10 supported...
  I'm not sure if the software will be compatible with your model of U920T, but its certainly worth a try...

• Installation of Ubuntu 14.04 on Satellite NB10t-A-101 does not work

  Hello world

  Sorry for my English: it is not my mother tongue. I'll try to explain my problem.

  I would like to install Ubuntu 14.04 on my computer (Toshiba Satellite NB10t-A-101), but it does not work.

  I boot on my USB (made with RUFUS), but it works once for each five times.

  After you install the operating system, when I restart the system, the computer does not find an operating system (I precise that I already check the EFI BIOS and disable secure boot)

  How to install Ubuntu?

  Hello

  This series of portable was equipped with a processor Intel Celeron 2810 n and this CPU belongs to the new Intel BayTrail platform.

  The * Intel deposit path * allows only the installation and utilization of systems capable of UEFI as Win 8 or 8.1 Win

• Satellite A210 - FN buttons does not work on Windows 7

  I have a problem, just install Windows 7 Build 7100 (fron upgrade Vista 32 bit) and the fn on my Satellite A 210 does not work corectly.
  It only works with the action of the num pad, other functions does not work.

  What should I do to make it work?

  It seams that I have problems with the actions of Toshibas tool whitch controls but I can't find name to update...

  Hello!

  I put t understand why Windows 7 is so popular right now it s only a beta version

  However, I think that the reason for this is why no Toshiba tool is available at the moment, but I can understand that because Windows 7 is not yet out.
  You can try to install the package of value added. This is for Vista, but maybe it works also on Windows 7 being the most drivers for Vista works on Windows 7 too.

  Consult the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Satellite A100: Recovery DVD does not work

  I want to restore my Toshiba Satellite A100 laptop to its original factory condition, but the DVD that comes with the package of recovery does not work...

  I have load to start computer press F12, and it starts on the DVD. It says "Loading RAMDISK Image", after which I am told by Toshiba customer service there should be options to clean up the hard drive or restore Windows XP.

  However, after VIRTUAL disk, I see a cursor on a black screen, and then the laptop off and restarts. After the connection, NO CHANGES made...

  What is the problem with that? How can I really use this recovery DVD?
  Someone help me please.

  Thank you.

  Hello

  The recovery procedure is not difficult.
  Just try to boot from the recovery CD or DVD and follow the Guide on the screen line.

  Your problem is very strange. You have created all the partitions on the HARD drive?
  I put really t know why your recovery CD doesn't work properly, but I think you should try to completely format the disk (also partitions), then try to boot from the recovery CD.

  Don't forget that the laptop is in the boot mode. (don t mix the standby or hibernation mode)

• Satellite L775 - mouse pad does not work properly

  I have a laptop Toshiba Satellite L775. I run Win 7 Home Premium. My mouse pad does not work properly. I also have a Logitech Anywhere MX wireless mouse. I tried the mouse pad to work properly with the key FN and F9, but it does not work. And you really have no idea if that turns or out of the mousepad anyway, subj for another time I guess.

  What does not work, but I have to do is to go to Control Panel then mouse option load that and just scroll the tabs without changing what each time and then close and the touch pad works. But only for this session. If I have my laptop nearby, or turn it off, I have to start throughout the whole process.

  What's past and how to fix this?

  Thank you very much.

  > What's past and how to fix this?
  After reading your ad, I still don t know what is your problem.
  > My mouse pad is not working properly
  How to understand this? What does not work properly? What happen exactly when you start your laptop?