Taking place called itibite bad image

Similar Questions

• Error, called "GfxUI.exe - bad Image".

  I have an error message which disappear from my Windows 7. It is called "GfxUi.exe - bad Image" and said that C:/Windows/System32/atiu9p64.dll is not designed to run on Windows or it contains an error. Then it asks me to resintall it but there is no option for this. It is more of a thing of substance; I can still run programs and work, but the error message does not disappear.

  Need help, please someone. Thank you

  Hello

  1. have you made changes on the computer before this problem?

  2. when exactly this error occurs?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run Microsoft Safety Scanner and check if it helps.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Method 2:

  Put your computer in a clean boot state to identify the application at the root of this problem.

  Place your computer in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Hope the information is useful.

• Upgrade Windows 10: error called "LogonUI.exe - bad Image C:\Windows\system32\LMIinit.dll.

  I have a Windows 7 Fujitsu Lifebook (5 years). I tried to update to Windows 10 without success. Finally after a Windows7 update and then upgrade Windows 10. Success! Remotely, the company THAT THIS guy decided that I had to update W10, now all I get is "failure in the snp nonpaged area - uvc.sys" the laptop then restarts auto and trying again and again. Looking at updates successfully I see there's a Windows 10 call successful as well as failed. I did a reset to, but who brought me back to Windows 7.  That's life.  However, when I close I now get an error called "LogonUI.exe - Bad Image C:\Windows\system32\LMIinit.dll if the other is not designed to run on Windows or it contains an error." Try to install the program by using the original installation media".

  With all the man hours spent the last week and a bit on this point, I have to stay on Windows 7 and when the thing dies completely invest in a new (if my boss allows me)!

  This my friends, is his last chance, can someone help me.

  Kind regards

  Sue

  Hello

  I realize has the inconvenience that you are experiencing with the installation of Windows 10. I will definitely help you with this.

  I suggest you refer to the suggestion created by Andre Da Costa in the link mentioned below:

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-fix-Windows-10-setup-failure/eba3c864-d9fe-4F8E-9468-81b1f89473ed

   

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• Mistakes of bad Image of Windows XP on startup

  Here is a list of the errors I receive at first upward:

  Rundll32.exe - Bad Image
  -application or DLL c:\WINDOWS\ilaqucad.dll is not a valid windows image. The text is the Setup disk.

  Rundll32.exe - bad Image
  -application or DLL C:\WINDOWS\abdsdmsg.dll is not a valid windows image. The text is the Setup disk.

  RUNDLL
  -module error loading specified ofqsi.dll not found

  RUNDLL
  -Error loading C:\WINDOWS\ilaqucad.dll
  %1 is not a valid WIn32app

  RUNDLL
  -Error loading c:\WINDOWS\abdsdmsg.dll
  %1 is not a valid Win32app

  Some of them are not pop up until I click OK on the previous errors.  I have no more of the Setup disk.

  What should I do?

  Part of the problem is if you configure the computer to start in a clean boot state, then things work OK (unlikely), there are no instructions that tell you what to do but then restore your computer to a normal state and which does not solve anything.

  Is that sort of thing pretty good work for you JoshB_2011 here?  Of course, this is not and he won't - ever.

  Is it supposed to be some kind of magic that happens when you start in a clean boot state, which makes all the problems disappear, then you go back to a normal state and all is well?

  To do something between these two things... and that's the "Troubleshooting" part... There is no included troubleshooting.

  I had read it all through (it may be not a good idea at first), then apply it.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Computer Dell laptop/windows xp, got virus.tried to fix. BAD IDEA. ERROR: DLL msgina.dll UI winlogon.exe - bad image.logon failed to load.

  Computer Dell laptop of my husband has a virus that wants you to install a fake security program. I tried to fix it. OOPS. I tried to choose an earlier date to restore your computer to and I got zapped, crashed and burned. Error is now: winlogon.exe - bad image then the msgina.dll login user interface DLL failed to load, contact admin to replace the dll or restore the original dll. I don't have a boot cd. Is there a way of "back door" to get his computer works again?

  As you know now, do a restore of the system on a severely infected machine is not a good thing. Better to save the data and do a clean installation of Windows. You can try to do it yourself, but based on your post, which I would not recommend it. I don't mean to hurt your feelings, just to be practical. It would be better to take the machine to a competent local tech (not a type of BigComputerStore/GeekSquad of the place).

  If you really want to try it yourself, here's what you need to do:

  1. start the computer with Linux Livecd such as Knoppix. You are using Linux, copy the data files on an external hard drive.
  2. install Windows using the XP Dell installation CD.
  3. install all the drivers for Dell. Use the Dell Resource CD or get the drivers from the Dell advance website.
  4. switch to XP Service Pack 3 and do all the Windows updates.
  5. install a good antivirus - NOD32 (commercial), Avast or Avira (both have free versions).
  6. install all other desired programs, updated if necessary (especially if you have MS Office).
  7. analyze data saved with the antivirus before you copy it to the new clean install. MS - MVP - Elephant Boy computers - don't panic!

• __C:\Windows\system32\AVGRSSTX bad Image. DLL

  He says that it is not designed to run on windows or it contains an error, this box appears each time I open a program, it also says bad Image.  Please help someone

  Thank you for taking the time to respond, it seems good that my hard drive is kaput, so all your suggestions have not worked.  Calculate offshore to be repaired, thanks again

• How can know you if you have a bad image of Windows 8?

  I wonder to reinstall Windows 8, Windows 8, 1 and all my applications for the third time on a XPS 8700 I got in November. I thought that my image is bad is because the system will not install the version of Dell and Dell recovery created backup to work with Windows 8.1. The evidence is that the patch worked on another system. I'm sure that was the case, but it's not the same to know exactly what the problem with my system. Is it possible to see if an image is good, without having to take hours and hours and hours of time at it (to possibly find out that wasn't the problem after all).

  I use Windows 8.1, so there is no refresh of the operating system. I have a bootable backup, I can use, but this is still going to cost me a lot of time to get the system to date and supposededly it will not work because he did a bad image.

  If you run an installation on the settings of factory or Dell Media backup and restore, it's probably a bad image. I have not seen a good setting for all Dell Windows 8 systems and so recommend clean installation with a .iso Windows 8.1 forget Dell backup and recovery fully.

  If you can get the follow-up .iso Windows reinstallation Guide / a Clean Install of Windows 8.1:

  http://dellwindowsreinstallationguide.com/

  And use these workarounds:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows-8-1/Microsoft-product-activation/

  If you can not get a .iso 8.1 Windows and that you or a friend have a license to retail for Windows 8.0/8.1 of the same version then follow the solution here:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-ISO/

  Otherwise, you will need to look for non-official sources.

  If you would rather not search through unofficial sources then you can a DVD of reinstalling Windows 8 request from Dell by filling out this form here if you are in the United States or to the CA:

  http://www.Dell.com/recoverymedia

  If you are in other areas, call Support Dell technology as they have not extended the courtesy of the form of support to other regions.

  Note Dell only you media of Windows 8 and Windows 8.1 not to cause road blocks Microsoft imposed for difficult Windows 8.1 upgrade. The Windows reinstallation Guide therefore also explains how to clean install Windows upgrade to Windows 8.1 and 8.0 as cleanly as possible, but direct clean install is preferable.

• Need help with Windows logon: LongonUI.exe - bad Image

  I recently received this message when you try to start windows:

  Longon window: LogonUI.exe - bad Image

  C:\Windows\system32\dwmapi.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  It gives me the message on a completely black screen, then if you click on OK or exit it message the screen remains black. I did some research on it and found that a recovery disk should help me with my problem.

  I don't have a recovery for my computer disk, so I ordered a via eBay windows 7 recovery disc, from a user with 100% + comments, I got tired of the to use to repair my system, using the system recovery options, but when I used it I got a new error:

  System recovery option

  This version of System Recovery Options is not compatible with the version of Windows that you want to repair. Try to use a recovery disc that is compatible with this version of Windows.

  I did some additional reading and also used the Bootrec.exe tool in the command prompt, but still no luck with the repair of my computer.

  Any help would be appreciated.

  I was going to reformat my computer soon, but I'd like to at least make it work so I can transfer all my files on an external hard drive first.

  Thank you

  Hello

  Thank you for visiting Microsoft Community.

  According to the description, I understand that you are facing in your Windows startup problems. I will certainly help you to question.

  The question might be if there is a file system corruption. So I would say that you want to run auto repair before you reinstall the operating system. To perform the task, I suggest you to try the steps below and see if it helps.

  Method 1:

  When you use the recovery (Windows RE) environment to resolve startup problems, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

  Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair, and if this does not help then you try to restore your computer to the previous date.

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files)

  Method 2

  Try to rebuild the BCD by using the Bootrec.exe tool.

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.

  2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  3. Click repair your computer.

  4. Click the operating system you want to repair, and then click Next.

  5. In the System Recovery Options dialog box, click command prompt.

  6. Type Bootrec.exe, and then press ENTER.

  See the following link for more information:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Hope this information helps.

  Meet us with the State of the question.

  Sincerely,

  Ankit Rajput

• Windows 7 error: Bad Image

  Before closing this thread, please listen to me.

  So, I was see random errors with a file in my system32 folder called shfolder.dll. This error prevents me from using all the applications I need or want to use and is very irritating.
  Here's the report...
  application.exe - bad Image
  C:\windows\system32\SHFOLDER. DLL is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.
  That's what it reads, Word for Word, exactly. If anyone has any advice I would love to hear it. Please help me.

  It seems that the clean boot won't be necessary, because I have already taken care of the issue with sfc scan. Thank you very much for your time Sir. Now I can continue with my game coding!

• CS6 installed, but half of the programs do not open and give me an error message 'Bad Image'

  3 days ago, I installed CS6, opened the first time no problem, now it gives me an error called "Adobe Premiere Pro.exe - bad Image":

  C:\Windows\system32\MSVCP100.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  After that, I deleted CS6 completely from my computer and reinstalled it, after that I scanned for virussus. Still the error message is displayed.

  I use Windows 7.

  Manually install the MSVC 2010 runtime by downloading the correct version of Microsoft.

  Mylenium

• I get the 'BAD IMAGE' when many *.exe files is available. The error image refers to "BROWSE ~ .dll." What is the correct file name?

  When I type (OK) the computer continues to the application, I entered, but there may be a range
  in the opinion of the 'BAD IMAGE' with various. EXE files. Somehow gotten past as the correct file name cut short
  what he should ever TRAVEL ~ .dll. I can rename it leaving out the "~" symbol, but I don't know what to rename it.
  Help?

  Hello

  It would be useful to the Windows OS is supported .

• Satellite L755D - Webcam: very bad image quality?

  Hello @all,

  I have a SAT. 755 (OS: win7 64 bit). The webcam returns a very bad image quality and I noticed that the driver is from the year 2006 (Microsoft, Version 6.1.760.17514).

  I installied the last 'pilot' vom site of Toshiba (version 2.0.0.19), which actually just updated the CAM software.

  It is a fact, that this webcam is of very poor quality, or could someone please help me improve the photos, which are not only in poor Skype, but also when I just test the cam.

  Greetings from the Austria
  erkg1959

  Hello

  Please check the film in front of the lens is detached.
  I think that many models is delivered with a protective film in front of the goal and it is not too easy to do.

  See you soon!

  Tom

• The bad Image of Skype error

  Hello! I get the error of the bad image whenever I try to start Skype. I run dxdiag but everything works. The error that says:

  THE BAD IMAGE ERROR

  C:\Windows\SYSTEM32\sxs.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the vendor to softwar for support. 0xc0000006 error status

  and after that, I get the message "Runtime error 217 at 4 005283D"

  Does not work either. In any case, I've solved the problem! Solution: I reinstalled Windows 8.1 pro (seems to be the unique solution to the problems of windows)

• LABWINDOWS CVI 2013 error: bad image in IValidateImage

  Hello

  travel form CVI 2012 to CVI 2013 I Get a sequence of the below errors in the application log.

  The errors seems to be generated whenever I have fly over the screen of the GUI of my application. After a sequence of these errors the application hang.

  Note that:

  -J' already installed the latest patch available for 2013 CVI

  -l' error was not present when compiling with CVI 2012

  -l' error is present also, when you distribute the application o windows XP

  Thank you

  Ezio Riva

  ERROR in widows application log

  The description for event ID 0 in source CVI could not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  [15:24:52.119] [IValidateImage] [FATAL] [.. \mgsource\image.c:9085 assertion failure]: FALSE (bad image in IValidateImage)

  Hi calou,.

  Do you agree with the workaround solutions provided by Daniel?

• Bad Image error - igdumdim32.dll

  Igdumdim32.dll somehow got on my Windows 7 system. From what I can find, it is a dll for Windows 8. Get the error message: "C:\windows\system32\igdumdim32.dll is not designed to run on Windows or it contains an error...". "Very irritating and does not disrupt some features. What should I do?

  Let me describe the problem as completely as possible.

  Reads the 'error' message: "C:\Windows\system32\igdumdim32.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator... »

  The "error" message occurs repeatedly. It occurs when I try to open a video on Foxfire. It's entitled"FlashPlayerPlugin_15_0_0_223.exe - Bad Image. "When I click OK, the message reappears. It appears 3 times in total and after I clicked OK whenever the video runs correctly, but it won't go full screen. This does not happen with Internet Explorer. The same message occurs when opening certain programs such as: Quicken (titled qw.exe - bad Image), QuickTime Player (titled QuickTimePlayer.exe - bad Image), Garmin Express (titled Express.exe - bad image) and others. In all cases the message come up 3 times and once I clicked OK for everything the program runs normally.

  I tried to find igdumdim32 in windows\system32, but he's not here. There's an igdumdim64 it. However, I found in C:\Windows\System32\DriverStore\FileRepository\5.inf_a...etc. It is also in C:\Windows\SysWOW64.

  Just in case someone else looking at this, I finally corrected this problem.  If you're reading this, it probably means that you have the same problem.  There are dozens of this error of 'Bad Image' messages in this forum and in the Microsoft forum.

  I think that 'Image' is the idea here, but it took me a long time to understand that.

  By a very winding road, I finished on the Intel support site (a friend suggested this).  Here, you can download a utility to update the drive, I did.  When he was executed, he informed me that he thought that I have a graphics driver of custom provider and (thank you), I would be cautious about downloading a new driver on their part.  That is why I did not.  However, that me indicated that there could be a graphic driver problem.

  Then I remembered that during my many and varied travels through the internet read something on a "Recovery Manager" that HP installs in the product (once again, thank you very much).  HP customer care has to a set of instructions on how to use the tool on their website: (using Recovery Manager to restore the software and drivers (Windows 7).

  I ran the Manager and I replaced the drive of Intel graphics.  Problem solved.

  I hope this can be useful to others.