Talk to Spokle with ezVPN?

Similar Questions

• IPP with Ezvpn and VPN Clients

  Hello

  I have a 5585 ASA running on 8.4. I have it set to accept the ezvpn NEM mode clients and then push the routes through IPP in the OSPF via redistribution on a list sheet road. Now I came with a second condition of the addition of VPN Clients to the same firewall. In the current configuration if I activate customers, they will push the 32 routing updates in the routing table makes a table long enough and I don't want to do that. What I understand of the redistribution of static route is that:

  (1) road should be static in the routing of ASA, inserted through IPP table or manually added

  (2) my redistribution list will allow all the roads that fall within the specific subnet.

  If I have a 192.168.1.0/24 defined in the ACL of redistribution, a route in this 24 will be added to the routing table. Please refer to the sample configuration:

  http://www.Cisco.com/en/us/partner/products/ps6120/products_configuration_example09186a00809d07de.shtml

  In the example of config is the road added to the list redisttribution/24 network but if you examine the output at the end of the document, a 32 road has been inserted in the router's routing table.

  I want to keep Ezvpn with IPP clients and at the same time to have VPN Clients running without IPP. Would appreciate any help in this!

  Thank you

  Sylvana

  Route-synthesis is only possible if for OSPF routers ABR/ASBR. I wasn't talking another ospf process, but on another area ospf.

  if I add summary-address for only my client vpn pool (10.10.0.0/16) will  my other routes for ezvpn stop being advertised or will they continue  to be advertised as before and only VPN Pool would be summarized?
  

  If you select the summary for 10.10.0.0/16 only that the network will be sumarized. Why would another announcement due to the synthesis of 10.10.0.0/16 cease?

• selection of talk bad deal with Chinese words like Japanese words

  There seems to be a bug that improperly speak Chinese as words of Japanese words. When I drag down with two fingers to speak on screen content in Chinese, she will speak Japanese wrong instead of Chinese.

  Any person facing such questions?

  What app and what device are you talking about?

• All-round Vpn connection with EZVpn

  Hello team,

  Is it possible to configure cisco EZVpn client to start and login before logon on Windows server? Automatically reconnect if the connection has been interrupted?

  The IPSec VPN client is a feature called start before logon that will allow you to establish the IPSec tunnel before Windows domain authentication. The function of self-initiation of VPN client can help with your second requirement.

  SBL:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_tech_note09186a00807955bc.shtml

  Auto open VPN:

  http://www.Cisco.com/en/us/docs/security/vpn_client/cisco_vpn_client/vpn_client500_501/administration/5vcAch7.html

• problem with Ezvpn and VPN from Site to Site

  Hello

  I want to set Ezvpn and VPN Site to another but the problem is that the EasyVpn that would only work at the Site to the Site does not at all

  I have set up 1 card for two VPN with different tagged crypto

  I had execlude the traffice to NOT be natted to, and when I remove the Ezvpn site to another work well

  crypto ISAKMP policy 100
  BA aes
  md5 hash
  preshared authentication
  Group 2
  !
  crypto ISAKMP policy 10000
  BA aes 256
  preshared authentication
  Group 5
  key address 123456 crypto isakmp (deleted)

  ISAKMP crypto client configuration group easyvpn
  easyvpn key
  domain ezvpn
  pool easyvpn
  ACL easyvpn
  Save-password
  Split-dns cme
  MAX User 9
  netmask 255.255.255.0
  !

  Crypto ipsec transform-set esp - aes 256 esp-sha-hmac vpn

  Crypto-map dynamic easyvpn 10
  Set transform-set dmvpn
  market arriere-route
  !
  !
  address-card crypto easyvpn local Dialer1
  card crypto client easyvpn of authentication list easyvpn
  card crypto isakmp authorization list easyvpn easyvpn
  client configuration address card crypto easyvpn answer
  easyvpn 100 card crypto ipsec-isakmp dynamic easyvpn
  easyvpn 1000 ipsec-isakmp crypto map
  defined by the peers (deleted)
  Set transform-set vpn
  game site address

  interface Dialer1
  the negotiated IP address
  IP mtu 1492
  NAT outside IP
  IP virtual-reassembly
  encapsulation ppp
  Dialer pool 1
  PPP authentication chap callin pap
  PPP chap hostname
  PPP chap password
  PPP pap sent-name to user
  easyVPN card crypto

  DSL_ACCESSLIST extended IP access list
  deny ip 100.0.0.0 0.0.0.255 101.1.1.0 0.0.0.255
  deny ip 100.0.0.0 0.0.0.255 70.0.0.0 0.0.0.255
  IP 100.0.0.0 allow 0.0.0.255 any
  refuse an entire ip
  easyvpn extended IP access list
  IP 100.0.0.0 allow 0.0.0.255 70.0.0.0 0.0.0.255
  IP extended site access list
  IP 100.0.0.0 allow 0.0.0.255 101.1.1.0 0.0.0.255

  Best regards

  The sequence number of card crypto for the static mapping crypto (site to site vpn) should be higher (ie: sequence number must be lower) than the ezvpn (map dynamic crypto).

  In your case, you must configure as follows:

  map easyvpn 10 ipsec-isakmp crypto
  defined by the peers (deleted)
  Set transform-set vpn
  game site address

  map easyvpn 150 - ipsec-isakmp crypto dynamic easyvpn

  Hope that solves this problem.

• problem with EZvpn

  Hello

  I'm trying to set up a server EzVPN which will allow users to connect remotely via internet through my router 2820

  the client can connect successfully, but it can reach the router and not the devices in the router subnet

  crypto ISAKMP policy 100
  BA aes
  md5 hash
  preshared authentication
  Group 2

  ISAKMP crypto 20 10 keepalive
  !
  ISAKMP crypto client configuration group easyvpn
  easyvpn key
  pool easyvpn
  ACL easyvpn
  Save-password
  MAX User 9
  netmask 255.255.255.0
  !
  !
  Crypto ipsec transform-set aes - esp esp-md5-hmac dmvpn
  !
  Crypto ipsec profile dmvpn
  Set transform-set dmvpn
  !
  !
  Crypto-map dynamic easyvpn 10
  Set transform-set dmvpn
  market arriere-route
  !
  !
  card crypto client easyvpn of authentication list easyvpn
  card crypto isakmp authorization list easyvpn easyvpn
  client configuration address card crypto easyvpn answer
  easyvpn 100 card crypto ipsec-isakmp dynamic easyvpn

  interface GigabitEthernet0/0
  description of the DSL interface
  no ip address
  automatic duplex
  automatic speed
  PPPoE enable global group
  PPPoE-client dial-pool-number 1
  !
  interface GigabitEthernet0/1
  interface internal Description
  IP 100.0.0.1 255.255.255.0
  IP nat inside

  !
  interface Dialer1
  the negotiated IP address
  IP mtu 1492
  NAT outside IP
  IP virtual-reassembly
  encapsulation ppp
  Dialer pool 1
  PPP authentication chap callin pap
  PPP chap hostname
  PPP chap password 0
  PPP pap sent-name to user
  easyvpn card crypto

  IP local pool easyvpn 70.0.0.1 70.0.0.100
  !

  easyvpn extended IP access list
  IP 100.0.0.0 allow 0.0.0.255 70.0.0.0 0.0.0.255

  Please be notified that I can reach only the private router only address not connected devices

  Thank you

  Please make sure that the exemption of NAT is configured (you must deny traffic to your internal subnets to the subnet of the ip pool so it is not coordinated).

• remote router configuration with EzVPN NEM by VPN

  I have the following scenario: Some 836 routers Cisco EzVPN network are connected to a hub VPN 3005 in the main façade.

  The work of LAN-to-LAN connection and I can also telnet via the VPN from a PC to the main façade of a router to a remote site using the address LAN IP of the remote router as a destination. But does not work for example do a "copy run tftp" on the remote router to the LAN of the main façade.

  My questions now are:

  Is it possible to transfer the remote routers configuration file or via the VPN IOS image between the remote router and the LAN at the main façade?

  And, if possible, how do we?

  Thanks in advance

  Mark

  When you make a "copy run tftp" from the remote router, it goes to the source of its external interface TFTP packets, not its interior. The external interface to your local network packets are NOT included in the list of packages to be encrypted, and therefore they lose.

  You must specify the router to the source its TFTP packets from the interface IP address inside, then these will be correctly encrypted and sent through the tunnel.

  The following command should do the trick for you:

  IP tftp source-interface

• problems with, phone, 6, Bluetooth kit, Nissan, after update, for, Rios, 1.0.2

  After the update to ios 10.0.2 - trying to use bluetooth to call my vehicle, it says: "this article is not in your phone book." How can I solve this problem?

  Greetings, joybelino1!

  Thank you for joining the communities Support from Apple! I can't wait to see that you are having problems with your Bluetooth in your car! The good news is that Apple has a great article that will help you with measures to try to resolve the problem. Read this article to gethelp to connect your iPhone, iPad, or iPod touch with your car radio. Even though he talks about problems with the connection, it also has the steps for other questions you may have once connected.
  
  

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Have a great day!

• I need my emails to remain as unique enties [as if they were in my box OUTLOOK] with absolutely no THREADS or interconnection so how can I disable this Hul Baillie

  First of all, iv tried to solve this problem by studying all areas as yuv led me to. None of them seem to deal directly with desperately boring THREADS that seem to be a default type setting disabling. Second, im new to all this computer stuff and, frankly, you use so much jargon and other meanings of words than other previous meanings for that much of what iv been brought to read, has baffled me and I can't decide if theres a solution somewhere in the text. Please talk to me with words very very simple instead of tabs or Tags and other like that you assume that im familiar with. I keep a list of categories on the left side of my THUNDERBIRD in box and I transfer each msg that I do not delete in the appropriate category where I can easily see each of them [with its new range of topic identification] I could have the opportunity to come back at a later date. With your SON frustrating completely undermine my system simple and effective; IM at the end of my teather and considering alternatives to THUNDERBIRD, but you come highly recommended a TI from my friends and if we (you and me) can sort seeds, im anticipating a long and useful association. In the simplest terms, please take me thru step by step simple and clear, every action, I must take to never see any reference to a any pure interference with my emails. And I appreciate that to treat someone of my ilk requires a certain amount of patience and time. Thank you! Hi Baillie Hull

  Press the CTRL key and holding down there press V
  in this menu select sort by.
  Then select unthreaded from the submenu.

  OK Threads are now extinct.

• Time Capsule no longer works in conjunction with the ISP modem

  Hi everyone, thanks in advance for any help you can provide, and my apologies if similar topics have already answered - rushed for this post, so I did not have too much time to browse the forums - please point me in the right direction if other threads exist!

  I'm in the United Kingdom and Virgin like my ISP... I had my Time Capsule for almost a year now and if it had connected to the Virgin Super Hub (dial-up Modem mode), without any problems. A few weeks back, I started to notice the drops intermittent in the Internet, until it finally went down all together without apparent reason. Now I can no longer use the Network Time Capsule using a Macbook, laptop computer Windows, Smartphone, Tablet, or Console games (I can always connect to the network, but there is 'no internet'). After talking at length with Virgin they basically blame the Time Capsule and say they cannot help me because it is not their technology. Since cutting the Capsule and turning back on the Super hub wireless, everything works again. I tried the simple things like rebooting, check connections etc., but to no avail.

  I have a lot of backups on the time Capsule (I use it for work purposes), so I'm afraid to play with things too in case they are deleted, but now desperately need to get operational new... Should I look for to reset the Capsule of time and/or remove/reset the wireless network I created when the first set up (if everything resets is possible without deleting the stored files)? Any help or advice would be much appreciated... Sorry for the long post!

  Thank you guys so much!

  The first part is to ease your mind... the TC is perfectly ok with reset... nothing can be deleted by using the reset button or reset everything in airport utility... the only way to erase the hard drive is to clear its contents through the disk tab in the airport utility.

  We noticed a lot of problems with the WAN port on the TC... And a bunch of modems... This can happen a day or day 366... but once it starts, it doesn't go away.

  Connect the TC in the Virgin hub working in router mode full... you're going to fill the TC.

  1 factory reset the TC.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  2. make a new configuration of your Mac or iOS devices.

  With the wan of the TC plugged into the hub of Virgin by ethernet it should choose default wire bridge... If this isn't the case, manually change the configuration.

  3. once it is bridged leave the connection of the Virgin hub since the LAN of the TC port WAN... and see how it goes...

  If it works ok for the backup then continue to use it... If it's still questions... Please post screenshots... or consider to resume to apple... in the United Kingdom, you should have a legal guarantee of a couple of years... much longer warranty Apple offer directly.

• BT Broadband Huawei Modem 3G with Tecra M5 or XP problem

  Please can you help me?

  I have a USB of Huawei E180 key for mobile broadband access that has been issued by British Telecom (BT). I want to use it with my Toshiba Tecra M5 (model PTM 50F - 013013EN) laptop running XP Professional (SP3).

  When inserted is recognized by XP as a Huawei device, but its software pre-installed driver does not load automatically.

  When I manually install the downloaded drivers for separately via BT connection manager software, I get a warning from Windows hardware conflict specific generic/no and the device will unfortunately not complete install and function.

  I spoke at length with the support of BT, but despite sending me a replacement unit and USB power control problem, and they were unable to help solve the problem and left the problem with me to try to resolve simply say that I have a problem with my laptop!

  As far as I know my Toshiba laptop and the XP operating system has the latest updates published and other devices such as flash storage and Tuner WinTV USB all works perfectly when it is installed, so please can you advise what I can try or what other information I can provide to you help me?

  The unit installed and works as expected in another computer Windows Vista Home Premium.

  > I talked at length with the support of BT, but despite sending me a replacement unit and USB power control problem, and they were unable to help solve the problem and left the problem with me to try to resolve simply say that I have a problem with my laptop!
  I think that all 3rd party would be to put the blame on the laptop if the don t know what s wrong and how the product in addition

  I put t know this modem but if there s a USB device, and then she runs as a plug & play device.
  This means that you need to install first the software/driver of modem before you would connect it to the laptop.

  Therefore, install the driver/software of modem.
  Then restart the laptop and after new reboot connect the modem to the USB port.
  After that you should see something on the screen and more often that the modem should be detected also in Device Manager.

  If you will not notice anything then I would recommend going to the Device Manager and remove (mark and uninstall) USB host controllers and hubs USB in the list of devices. Reboot the laptop (the modem must be disconnected!).
  After the laptop has rebooted again, wait that the USB ports were resettled.
  Then connect the modem to the USB port.

• Siri works with microphone free hands

  HI do you haz of indices if Siri works with hands free microphone that comes in several headphones? I have a headset with a microphone and I wanted to use it for Siri on my iPad

  Post edited by: Horriblestar5

  Hi Horriblestar5,

  Siri works with most of the helmets and can understand commands.  Click on the link below for more information on Siri works with your iPad.  I've highlights some key for you information.

  Use Siri on your iPhone, iPad or iPod touch

  Talk to Siri with your headset or in your car

  • If you use a helmet that has a remote control, press and hold the Center button or call button until you hear a chime. Then say you need.
  • If you are in a vehicle that supports CarPlay or free eyes, you can press and hold the voice button on your wheel. Then say you need.

  Take care

• Satellite A50 - conflict with Wacom Tablet

  Hello

  I bought the Satellite A500, Wacom DTI 520UB, specifically to be used with the Wilcom embroidery software.

  I installed the software and it works fine on the laptop only. But as soon as I slide transversely to the Tablet and try and do something there - it seems uncalibrate himself. I have to turn the tablet on and outside so he could re - calibrate. This is ridiculous. All I can think that there is some collide with something on the laptop that interferes with the tablet. The Tablet seems to work well on and more model toshiba with XP on it...

  Anyone with any help it would be greatly appreciated that Wilcom and Wacom seem to have given up. Thank you

  Hello

  > The Tablet seems to work well on and more model toshiba with XP on it...
  Maybe the tablets and/or software isn't compatible with your new laptop that you use with Vista or Windows 7, I guess.

  In your case I would contact the manufacture of the tablet. Maybe they can send you an update to the software or more. Just talk a bit with the guy.

  Also, make sure that you use the factory settings and you have installed the latest version of the BIOS.

• Talk about screen accessibility

  I love the option of screen talk and share with students with reading disabilities. My problem is that students are having problems turning on with the stroke of 2 fingers.  He will often return the page to the top, pull up the safari web address entered or even drop the Notification Center. Is this there any other way to market that requires less precision?   The best scenario would be the clik triple but can't seem to find a way to get there.  TIA

  Hi, Tdcraw.

  Please visit Apple support communities.

  I see that you are looking for an alternative to option screen talk as there were some difficulties to use the sweep two fingers.  While there is currently not an option to set the precision slide, another option would be to ask Siri to talk about the rear screen for students.  You can access Siri by pressing and holding the button Home button until the message asking you, "What?" that can help you with Then say "talk to the screen."

  Use Siri on your iPhone, iPad or iPod touch

  Talk about screen

  If you have a hard time reading the text on your iOS device, use screen speak for read you your e-mail, iMessages, web pages and books. Put the screen talk and slide down from the top with two fingers, or just tell Siri screen talking and have all read of the page content. You can adjust the dialect voices and speaking rate, and words highlighted as long as they are read.

  Accessibility

  See you soon

• Talk to a hardware shift register

  I want to make a shift register bits. To do this, I put in place a digital model of multiple line (I have need a clock, serial data, a few lines on or off, etc..) Basically, I'm trying to build a time diagram in labview. I can make this piece by piece, but it seems not elegant.

  Can someone point me to a simpler solution? I talked a lot with DAQMX and shift material recorded using labivew. All comments would be appreciated!

  NM