TANDBERG MCU TTC2-01 ADMIN GUIDE

Similar Questions

• Tandberg MCU 5300 series supports the Conference me the feature?

  Hi all

  I would like to know that the 5300 Tandberg MCU series supports the Conference me the feature?

  We checked the 5320 MCU data sheet,

  Cisco TelePresence MCU 5320 CTI-5320-MCU-K9

  Comes with: 5320 - MCU and cables - MCU ports must be enabled with optional port licenses

  Software for Cisco TelePresence MCU 5320 license options

  1 nHD full HD/2 HD/4 SD/8 ports on 5320 MCU (max 10 with this option (6 used for nHD)) LIC-5300-4PL

  Second option Ethernet port (VFO) for the MCU 5320 LIC-5300-VFO

  AES and HTTPS option for the MCU 5320 LIC-AESMCU53-K9

  However, there is no information related to Conference me function.

  So, can we know everything that Tandberg MCU 5300 series supports the Conference me the feature?

  Best regards

  Ben

  Hi Ben,

  Conference is not compatible with the MCU 5300 series.

  Best regards

  Markus

  Sent by Cisco Support technique iPad App

• Workforce Planning Admin Guide

  Anyone know good admin guide for workforce planning? Or at least a good blog post on the subject
  
  Thanks in advance

  Try:-http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_11113_wfp_admin.pdf

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• SPA 3102 Admin Guide

  Where can I download the administrator for the Linksys SPA 3102's Guide?

  I don't remember how many times I tried to find such a link and how many hours I have spent so far with it. I could find answers to this question, but the links are no longer valid.

  Thank you for your help.

  Try this link.

• Link to vWorkspace 8.6 Admin Guide

  I can't find the link for the vWorkspace 8.6 Administration Guide. I see the who's new and system requirements, but no administrator's Guide. Is there a Release Notes too?

  Thank you

  -Greg

  Hello

  You can use the below URL.

  support.Software.Dell.com/.../Release-Notes-guides

  See you soon,.

  Chandra

• C40 Multisite call

  Hi all

  I have to configure multi-site/multiway,

  We have VCSC and MCU.

  and endpoints such as C40, ex90 and MXP1700.

  Ex90 has licence Multisite for C40, but it's not. Able to make P2P calls and then add other EX90 IAM conversation endpoints.

  We have a VCSC and MCU.

  How can I configure multiway help MCU?  I tried to set up an alias in VCS, Conference factory-22228

  and the model [email protected] / * /

  Conference factory State is active. 22228 added as base10 multiway on the c40. My prefix for MCU Conference Service is 8.

  I need to set up a permanent conference in MCU?

  I have to configure Permanent Conference as 22228?

  My SIP domain name is vcs.com

  Rgds

  Bobby

  Hi Bobby,.

  on the check of EX90 you added the multisite key. TC5 version wouldn't hurt.

  Do not use a version

  Some generic endpoint support information:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/articles/cisco_telepresence_mcu_configure_multiway_kb_166.shtml

  You can have multiway or multisite, so if you have already configured the EX90 for multiway

  This will be the reason why you can't add another local call, these features are mutually exclusive.

  If you delete the multiway address it should work again with multisite.

  Cordially conf multisite, check on the

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_Multiway_Deployment_Guide_X7.PDF

  In short you must enable autocreateing of conferences with no PIN number prompt and have a prefix MCU

  recording, editing of your plant in conference setting, do not overlap with other conferences / MSDS

  Not to mention that I recommend the vcs, mcu and endpoint admin guides http://tandberg.com/docs is a good start

  Bobby, please note the answer with the stars below and set the thread if it's an answer!

• How to get out Mcu put snap in the sx20 codec

  As I've attached image, I raised lite snap shot box, I can not MCU snaps into the sx20 codec.

  We use MCU (5300 series), Gatekeeper & sx20 codec as endpoint device.

  I see that the call is using encryption, instant end do not appear if the call is encrypted.

  I do not know what version of the software that you use, but there is a change in behavior for snapshots between TC7.2 and 7.3, see each of the admin guide below for details.  Note that end snapshots are deleted, as well as a new 'notification of surveillance '.

  SX20 Admin Guide TC7.2, pg 19.

  SX20 Admin Guide TC7.3, pg 13.

  There is a very long back and just discuss the TC7.3 release regarding snapshots (link below), but the behavior will change slightly in TC7.3.3.  However, I don't know if end snapshots will come back or not.

  tc730-websnapshots-broken-even-further-design

• 5320 MCU Sip settings

  I want to deploy 5320 MCU as multimedia cm unified using this resource guide (page 36). But I did not 'Use the trunk' option on page settings_sip.html webUI. I also have access to an another 5320 MCU with the same set of function keys, where this option is available. Only difference between the two devices is the firmware version:

  4.4 (3.42) on my device and 4.5 (1.45) on devices where "Trunk of use" is available.

  Q1: Should I upgrade or there is workaround to use sip trunk without this option?

  Q2: Do I have to pay for this update?

  Q3: If my distributor can not get it to me or my relationships with them stopped can get updates directly from cisco?

  See the section "Deployment of a Unified CM MCU as a multimedia resource" in the installation guide that matches your version of software MCU.

  MCU 4.4 Installation Guide

  MCU 4.5 installation guide

  Upgrades of software MCU does not require a key to unblocking, but a contract of active service for the MCU is required to download the software.

  Series 5300 MCU software

• How to set the password on SX10 admin menu to prohibit access to control IR remote by users?

  Hi people, I do not know where to put the menu the remote control password in the Sx10 codec! I need to block access for users, because people can change network configs e etc. by remote control!

  The version of my SX10 is: TC7.3.3.c84180a

  For 'SX20' I can block with this comand: ' xCommand SystemUnit MenuPassword game password: xxxxxx ".

  BUT FOR SX10 IS NOT POSSIBLE!

  Thank you very much!!!

  The SX10 does not support this feature when you run TC software, but this is only possible when you run this software.  When / if you decide to upgrade to this software, see the SX10 Admin Guide on pgs 15 and 19 for restrict access to menu options...

• Video loading on 5310 MCU (via XML - RPC)

  Hello.

  I am trying to create a script for Nagios monitoring monitor the use of the video ports on my 5310 MCU (software version 4.4).

  I found an example of a perl using RPC::XML scipt and it works quiet well except for one thing: I have no video support.

  I used the "device.health.query" method, which should include a member named "videoLoad" (an allusion to Cisco TelePresence MCU API 2.10 Guide).

  I get a correct result of this method, but there are some missing members.

  Here is the result:

  rtcBatteryStatus

  Ok

  operationalStatus

  assets

  voltagesStatusWorst

  Ok

  fanStatusWorst

  Ok

  temperatureStatusWorst

  Ok

  temperatureStatus

  Ok

  mediaLoad

  1

  voltagesStatus

  Ok

  fanStatus

  Ok

  cpuLoad

  0

  rtcBatteryStatusWorst

  Ok

  There is no «videoLoad» Member

  Is that what I got wrong, or do I have to activate something on the MCU?

  Is there another way to get the load of the video of the MCU (such as SNMP or sth)?

  Kind regards

  Sven Lindeke

  HELLO Sven.  Thus, it seems that the platform of the 5300 series will not return these values as the old platforms.  VideoLoad and audioLoad return values have been deleted because they were reporting incorrect information from this platform works mixed audio and video DSP unlike older models of MCU.

  The only options I see here:

  (1) run a script to extract the status data > conferences page.
  (2) to invest in the conductor and request a conductor for audio and video ports in use.
  (3) account team push to drive above CDETS for call API to draw the status information > conferences page.
  (4) put in place a script to subscribe to and then listen to the events of feedback - see page 18 of the http://www.cisco.com/en/US/docs/telepresence/infrastructure/mcu/api_guide/MCU_API_2-10.pdf
  May be able to count participants join and leave this way maybe.

  I know that doesn't help you now, but only four methods I can recommend at this time.

  VR
  Patrick

• All series on stacking MCU 5300

  Hello world

  As my topic above.

  I have several questions on stacking MCU 5300 series

  1. what type of series 5300 MCU only stackable? 5310 + 5310? or + 5310 5320? or + -5320 5320?

  2. If I cumulation 5320 + 5320 MCU, can I do conference call with 40 participants from HD in a room?

  3. How about the layout?

  4. What are the different between stacking and cascade MCU?

  Please advise,

  Thank you

  Ovindo Prastyo Utomo

  Hello Ovindo-

  For questions 1 and 2, you can take a look at this powerpoint which shows different stacking combinations for the 5300 series MCU and port capacity for each.

  Regarding the page layouts, the 5300 series follow the same layouts class microcontrollers such as the 4000 series and MSE 8510.  In the MCU 5300 Administrator's guide, it covers some of these layouts.

  The packing is just another word as reunification when compared with other microcontrollers, it allows you to join two or more microcontrollers (two can only be stacked/grouped in the 5300 MCU series).  Once on the other two microcontrollers are treated as a big MCU.

  Cascade, creates a link involved between two microcontrollers.  A MCU dials to the other as a participant and is treated as such in order to allow a larger participants to attend a conference of MCU another if one is at capacity.

  Hope this helps some.

• Will there be a new commissioning Guide in the works?

  Hi, I'm looking for a commissioning guide that is updated.  The new Jabber Cisco telepresence admin guide asks the reader to find in my version of TMS Provisioning Deployment Guide.  Now that I've installed Extensions commissioning, I can't find a guide that works.  Maybe I missed it.

  Darren

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/tmspe/Install_Guide/Cisco_TMSPE_Deployment_Guide_1-0.PDF

• 5320 MCU software update 3.1 TS

  We currently have 5320 MCU running version 4.5 (1.45). I see that Cisco offers code TelePresence MCU server:

  http://www.Cisco.com/c/en/us/support/conferencing/Telepresence-MCU-5320/model.html#releasenotes ~ rdtab1

  Looking at the release notes is not very clear if when running 3.1 GST in MCU we will lose the ability to "Téléprésence MCU" in CUCM to use this 5320 MCU for Ad - hoc conferences.

  I know that GST 3.1 does not offer this possibility, but if you look at the file name for the MCU is cisco_ts_3.1_1.98_for_mcu_5300.zip (32,04 MB) vs GST 3.1 cisco_ts8700_3.1_1.98.zip (26,24 MB)

  Thank you

  If you upgrade your 5320 MCU with the telepresence server migration software, it will transform the MCU in a server of telepresence for all functions and features will be a telepresence server and not a MCU.  See the Software of TS running on MCU 5300 Series installation guide on how to convert your MCU to a telepresence server, if you are interested.

  Here are two good discussions comparing platforms MCU and telepresence server, one of them specifically on migration from one to the other.

  What-difference-between-MCU-Cisco-Telepresence-Server

  Why-Replace-MSE-8510-MCU-44-Telepresence-Server-31

  The cisco_ts_3.1_1.98_for_mcu_5300 software is for a series of 5300 MCU migrating to a server of telepresence.  The cisco_ts8700_3.1_1.98 software is specifically for the hardware already running a TP server software, such as the various servers of telepresence models listed here, this includes MCUs migrated to the server TP as the 5300 MCU to MCU MSE 8510 series software.

• record of MCU on CUCM

  Hi everyone, can you help me put the MCU on the CUCM?

  I need the exact steps to do work and perform videoconferencing

  I recorded the EX90, MX200 and DX80 on the CUCM

  Thank you very much

  MCU 5310

  CUCM 10.5

  Take a peek on the MCU 4.5 Deployment Guide, it provides the necessary steps on how to add the MCU to CUCM as a multimedia resource.

• Start Guide - ' hello world ' in Orchestrator

  When a person manages to get Orchestrator running, it is far from clear, what to do next, or even whether to proceed. Is there a document that explains, with clear examples, how Orchestrator do something?

  Is there, for example, something that tells you how to run a workflow? Even if it just prints "hello world" somewhere, that would be an important start. The installation guide gets the product set up, admin guide and developers go into details but they seem to assume you know of what the product all about and he can do. An expert could find a reference, but it isn't good for a beginner.

  I thought he'd be plents of articles discussing the useful things you can do, but I've not found anything?

  At this point I don't have to do any particular task; a guide step by step with screenshots from initial configuration is just finished and ending with an example of a workflow running would be perfect if such a thing exists?

  Hi Yau,

  You're not the first to make this request

  It is in our plans to add some basic admin to the doc procedures, to give a better idea of what Orchestrator is and does. We will add this kind of information on future releases.

  In the meantime, you can try running a section of Workflow on p19 of the Management Guide. The weboperator Web view provides a pretty good idea of what Orchestrator drove out of a Web browser. Take a look at start a display of Web pages on p201of in the developer's Guide.

  Kind regards

  Stuart Clements

  Orchestrator documentation team