HP ENVY: The screen does not turn when only keyboard

Similar Questions

• Satellite A210 1AP - the screen does not turn

  I had a problem about a month ago with my Toshiba Satellite A210-1AP, just that the screen did not turn. Was working on the computer, all the lights were on. The light that shows the HARD disc flickered, as usual, but with display always off. So I stop, and the next time I tried it was warking as usual, with display turned on, he asked if I want to start windows normally or in safe mode (as when it is restarted abnormally). Then worked normally for a few days, and then it happens again. At this point, I could not go to the service (computer was in warranty, and how do you prove that something happens sometimes if it happened there). So I continued to use it, and as the time past the problem was more often. So I decided to go to the service.

  Guy in the service, said that the problem is the motherboard, so he changed the motherboard and it took months for him to do, and then when I called he said that it still does not. And maybe he has change rooms, display, graphics card is perhaps a problem, that he has not seen the problem like this...

  So my question is do you know what could be the problem? And the second question is can I demand of him, because he went from 30 days to give me a new computer rather change all parties to this issue?

  Thank you
  Nikola

  Hi mate,

  It's really hard to say what causes this problem, but I think that notebok technicians do a good job and they will be committed to repair your laptop as soon as possible. Maybe they ordered some new parts, but they are not available at this time

  Theoretically, all that could be the reason of this problem FL inverter, LCD screen, motherboard, graphics card, cable, etc.

  So I think you should call the technicians still what is the current status.
  But I doubt that you can get a new laptop for free. If it of still under warranty, it will be repaired.

• Bug: The screen does not sleep when the phone is plugged in / recharge

  The screen is not automatically timeout if the phone is connected via USB - it doesn't seem to be an option to change this.

  Looks like the screen is activated by default when loading, which means that it takes more time to load.

  Go into the settings of-> Applications-> development-> stay awake (uncheck)

• My iPhone 4S is sensitive to my computer and turn on siri, however the screen does not turn

  I have an iphone 4S with the newest ios (as of December 4, 2015). It was connected to a laptop (not a mac) to recharge when the laptop and the phone have both froze. The laptop has rebooted while the phone was still plugged. The laptop is fine, but the phone never turned back. It is always sensitive when I plug it into the computer laptop and if I hold down the home button.

  • So far, I have tried holding down the home button and power for about 10-15 seconds.
  • Now I tried the power button down for 10 seconds
  • I had plugged into wall to charge for about 20 minutes.

  There was no change in the screen. I think it's maybe a problem with the screen, the phone was hot to the touch when the screen stopped working. Someone was playing a game on it at the time it was plugged into the laptop. I don't have a warranty of any kind on the phone.

  Would appreciate a help,

  Kind regards

  A worried user 4S

  I pressed power and the button "home" for about 20 seconds and the phone has rebooted and is back on again once.

• I lost my control to activate or control my web cam icon that has been hidden on the left side of the screen does not appear when I scroll over the area, in which it was hidden. How to bring back the control icons?

  Web cam icon

  Hello

  Select start - all programs to see if the program the camera is there. Once operational it is usually
  an option to tell the camera to load at startup.

  Check with the Site of the manufacturer of system and re - install the latest driver for the camera and there may be
  Camera control software (usually included with the driver).

  Another option would be to try a restore of the system when he was working IF possible.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite M60 - screen does not light when I reboot

  I have a Toshiba Satellite M60 and the screen does not come when I turn off or restart. It takes approximately 12 trials before it lights. When the screen does the computer not light again starts ok just no screen.

  I put in sleep mode if I don't want the hassle of trying to get the screen lights up. What is a screen problem or inverter?

  Any help would be appreciated.

  I doubt that someone who has no experience with this stuff will be able to replace anything on the motherboard.
  For me it sounds very risky and I think that it of better to take the machine to an experienced technician to do this in his own hand and damage the whole motherboard

• Satellite Pro C660D - screen does not turn

  I just got my Satellite Pro C660D back from repair (for a faulty fan), but the screen does not light when I start the laptop.

  She lights up on the front (and I can rotate the block number power sp that the keyboard works).
  Any ideas?

  I agree, I mean the laptop should work just fine after it has been fixed by ASP so I think that something was not right here and the technician must check this!

• HP Envy 15 "touch screen power LED appears, but the fans does not and the screen does not light

  Hello!

  I'm a student in computer engineering at the University of Waterloo 1A, and I run a very serious problem with my HP Envy 15 "TouchSmart laptop computer running Windows 8.1. It is a problem that just started today, and I'd rather have a first support here before going to see the technical support Office sometimes tomorrow. It has to do with the screen and the fans where the Power LED lights in white, just as when the laptop works properly.

  (I have warranty on the laptop when it was purchased last June, except that if I find that I need to get a replacement, I'll lose all my work, I did on that since I started my semester.) It's so silly of me not to have all my work saved on a backup, because I have an external hard drive. Problem is, I've had too many problems in getting myself organized, I'm not being open-minded as I should, and worse, I'm not a balance between life and work at home.)

  Before I had my MATH 117 conference (Calculus 1 Engineering), I was in a nearby lab where my laptop was open and turned, works correctly. I've had NetBeans IDE running since I wanted to work on the second part of my current assignment of CS 137 (principles of programming). Because it was almost time for my presentation, I closed the laptop by simply moving the screen down on the keyboard, where it goes into mode 'sleep'. (Whenever I flip to the top of the screen, the laptop is supposed to return, and the sliding screen of Windows 8.1 connection will appear.)

  When I took my seat for reading, I wanted to spend a little time to work on my programming assignment. However, after the reversal of the screen to the top, instead of having the login screen appears, I encountered the problem: the power supply light is showing a white light, but I don't hear the fans between the ventilation openings on the left side of the laptop and the screen does not light. I tried to take the power for several seconds and once button at least 10 seconds, except that the power light continues to display on a white light. The Commission of the Wi - Fi light is not displayed.

  Whatever it is, I don't want to take out the battery because I have that on my last laptop, and it's from there that I couldn't turn to the former, a new market. If I leave the Envy laptop battery, it will short-circuit the connections between the battery and the computer, and so several components will FRY. For now, what I do let the laptop is to empty the load on the battery. Then, once I noticed that the power light does not project a white light, or plug in the AC adapter and try turning the laptop on the power button.

  It will take a little while for the circuit drain the load on my battery but...

  Anyway, please would you be kind enough to help me with this problem? I would really appreciate if you can give me several recommendations. Thank you!

  Hello @GregPDesWHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is not on, and I'd be happy to help you in this case!

  In order to restore the features of your computer once more, I recommend you follow the steps described in this document on the computer does not (Windows 8). If the problem persists after having exhausted all the steps in this document, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• Light (switch) on my screen does not turn off. I have to shut my computer down several times a day to turn off the monitor.

  Light (switch) on my screen does not turn off.  So, I shut down my computer and restart several times a day, because when I put it in mode 'sleep', he wakes to the top in a few minutes and will not fall asleep.  I could put a blanket on my screen when not in use, but I'd rather find a way to make it stay asleep when I tell him.

  Light (switch) had already done once before and I was so worried that once I turned off the monitor that I would never get it new on... a bit short of money here, to buy a new monitor, but the next day, I pressed the power button with an additional downward pressure and I could so he could start working again (able to turn the market monitor).  It was about 3 weeks ago.  Now, the light stays green, unless I stop the whole computer.

  Maybe my main problem is sleep mode, which removes the screen for like 2 minutes and then he wakes up to the top and is so rude when I myself and try to sleep, I just turn off the monitor everytime I put the computer to sleep.

  Now, I can't turn off the monitor, except by turning off the computer.

  Hi JDandGinger,

  I suggest you follow the provided article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  If the problem still persists contact the manufacturer of the monitor for more help and information.

• When I click and drag a window to move its location on the screen does not move properly.

  When I click and drag a window to move its location on the screen does not move properly. It leaves a "track" of windows. Whatever the problem is scroll is also affected when the page moves in waves. Why he started to do this, and if someone can offer a solution? Thank you!

  original title: "leakage" of windows

  It is a common problem with how XP displays the items on your screen. When things get a bit bogged down, you'll start to see trails of the window as you drag. Unfortunately, there is no solution, but future versions of Windows do not have this problem with a new rendering of the graphics system.

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Arm, wrist and the screen does not light.

  I just wanted to give a few comments. When I walk, carry heavy bags and I want to watch the time I lift my arm to look at my Apple Watch and the screen does not light. Maybe its because the movement of the arm is subtle, since I am carrying heavy bags. I was wondering if that could be repaired since both times I tried it, annoyed me. Walk in a street busy NYC with my groceries, I would like to know something, briefly, on my watch as I walk with the duty to stop or to disembark the bags.

  Hello

  It is a community of support based on the user.

  To make sure that your comments and suggestion are presented to the attention of Apple, you can submit the following form (all comments are read by Apple):

  https://www.Apple.com/feedback/watch.html

• code 511 undetected fan and the fan does not turn or unraced where do replacement or is this question solfware

  code 511 undetected fan and the fan does not turn or did not run where do replacement or this question solfware please help

  [Moved from the community centre of Participation]

  Fan errors are usually hardware problems. There is a fan in the case including detector does not detect that it is available or spinning. This could be a problem with the real fan or the fan sensor.

  Does this have to do with? Are you talking about an error that is displayed by a Windows machine? If so, what version of Windows? When the error take? At boot time? Before or after that Windows allows you to open a session? When you provide no details, it is almost impossible for anyone to help.

• Keys (Fn + F6 and F7) function to set the brightness of the screen does not work

  original title: Fn + F6 and F7 to adjust the brightness of the screen does not

  The function Fn + F6 or F7 has suddenly stopped working. It has been fine until now, but when I press on them now, nothing happens. I use a toshiba laptop with windows xp, can provide more information if necessary

  Thank you

  Hello

  1 have had any changes made to your computer before this problem?

  2. What is the number of the model of the computer?

  3. the other function keys work as should.

  Perform the steps mentioned below and check:

  Step 1:

  Check if the problem persists when the computer is in clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Make sure that you put the computer to Start Normal once you have finished by referring to step 7 in the article.

  Step 2:

  I suggest you perform the steps mentioned below and check if it helps:

  http://forums.Toshiba.com/T5/keyboards-touchpads/fn-key-not-working/TD-p/253131

  (Valid for all models of Toshiba laptops)

  If the problem persists I suggest you to contact Toshiba to get help:

  http://Toshiba.com/Tai/support.jsp

  Let us know if it helps.

• In Outlook Express, when I type in the first letter of an e-mail address that is in my contacts, the dropdown does not close when I click the right address.

  Original title:

  Under XP, when I type in the first letter of an e-mail address that is in my contacts, the dropdown does not close when I click the right address. What a nuisance! Also, when I go to create a new e-mail message, an address of my contacts appears in no particular place, making it impossible to complete the message.

  Hello

  I suggest you turn off Auto complete and then check if you face the same problem.

  a. open Outlook Express.

  b. click on Tools.

  c. click on Options.

  d. click the send tab.

  e. uncheck the e-mail address automatically complete when composing box.

  f. click OK.

  Turn Auto complete and test again to see if the behavior is better. To activate it again, follow the same steps as above, but put a check mark in the box.