tcpdump
On the cisco 4250XL, it shows a 2 sniff... int2 and int3 interfaces. The hardwar is falcon1 and falcon2.
I want to be able to view traffic from these interfaces.
On the old 3.x sensors that I could use snoop and specify the interface spwr to see this.
What is the counterpart of 4.0?
In version 5.0, you will be able to run tcpdump from the command line on all interfaces of data, including the XL/falcon ports. Currently, the driver for the XL ports only allows a consumer of packages at a time. So you get the ID or falcondump but not both.
Tags: Cisco Security
Similar Questions
-
ACS 5.1 tcpdump tech dumptcp 'feature '.
Hello
I'm just installing ACS 5.1 for the first time and came across the dumptcp tech 'feature '.
This command seems to be almost completely useless to capture the packets to the ACS 5.1 OS!
It is not possible to specify a filter or to capture packets on the disc. The only options that exist are the ability to specify the number of packets that are dumped into the console, which rather limits its usefulness, especially if you're SSHed in ACS 5.1 in the first place.
County of Tech dumptcp 0?
<1-10000>County of packageRead the order reference http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_app_a.html#wp1039556 made me laugh. Author tech showed the while command as SSHed in and together they captured onscreen, surprise, their console session SSH packets.
So - 2 questions:
(1) does anyone know of an alternative within the ACS 5.1 host operating system to capture network packets while SSHed in?
(2) at - it already creates a demand with Cisco to improve the tech 'feature' dumptcp by adding the ability to filter packets and capture the disk?
Thank you very much.
There is an improvement CDETS open:
CSCtd13775: ACS5 and TCPDump/Sniffer features
1-10000> -
TCPdump based on detection of interfaces for IDSM2
When we deploy new IDSM2 blades in various places, we need to ensure that the interfaces of remote sensing have sufficient visibility in social safety nets. To do this, we (security group) depend on the network administrators to configure SPAN, RSPAN, VACL, etc.. Sometimes the initial Setup is done well, but when major changes are made to the switch, the SPAN/VACL config is lost due to human error. Thus, tcpdump is very necessary to ensure that SPAN/RSPAN/VACL etc. as the case may be set up correctly. Another reason I can think of is when the one-way traffic is stride detection IDSM2, not bidirectional interface.
We can use tcpdump on devices by stopping the CIDS ' stop /etc/init.d/cids ' first. Is there a work around to run tcpdump on the IDSM2? What interface linux eth? int7 and int8 correspond to?
Let me know, thanks.
Try to use 'tcpdump - r' where is the name of the output file to falcondump. -r is an option "read from file" tcpdump.
Falcondump is expected to produce a file "falcondump.pcap" by default; you would feed this file tcpdump with the - r option.
For a detailed analysis, we use Ethereal on a different workstation.
SC
-
tcpdump works more last ISE?
ISE, Version 1.2
Patch 1 and 2 installed Patch.
When I do a TCP dump format RAW, Wireshark cannot open the PCAP file? DOH?
Dump of the file shows that it is in the form of text, even when I specify "Raw format".
Browser: IE8
> cat TCPdump.pcap | more
10:34:40.435767 IP (tos 0 x 0, 0, offset 6848, ttl 64, flags [DF], proto id: TCP (6), length: 669) ise.https > xxxxxx.36152: P 22
91174308:2291174937 (629) ack 2847270850 win 60
10:34:40.440341 IP (tos 0 x 0, 0, offset 37426, ttl 64, flags [DF], proto id: UDP (17), length: 71) ise.45102 > xxxxxxxm.
domain: 39538 + PTR? 65.66.100.10.in - addr.arpa. (43)
Someone at - he saw this also?
It is a known problem. Patch 2 actually "broke" this feature. This problem is fixed in Patch 3
CSCuj51094 - TCPDump capture file does not work on Patch - 2 Alpha
120 patch3 will be released towards the end of this month.
If you open the "raw" file in Notepad, this is actually the human-readable format.
-
TL; DR: connections to the server to slow down to a crawl for the customers, without apparent reason.
________________________________________________________________________
Server: last model Intel Xserve quad Xeon 2.26 GHz, 12 GB of RAM, with all updates linking El Cap 10.11.6/Server 5.1.7 plant internal SSD. Accessed files are on separate disk. Bare metal system installation and reconfig a few months ago (server were previously running Snow Leopard). Our services enabled only for customers are the sharing of files with Time Machine. OD turned off, since we do not use the services in need.
Network: Wired cat 6 GigE via managed HP happen, more wireless for mobile devices. About 60 connections total network at any time. Xserve bonded (i.e. dual GigE) ethernet link to pass. Comcast Business Internet connection is theoretically 150 / 20 Mbit/s down/up but very variable in practice.
Customers: over 30 Macs, the recent OS versions (with the exception of the one with 10.6.8). Some connected via AFP, some SMB. About 8 Basic users mostly on iMac 27 "with a lot of RAM launch Adobe CC files from the server on the network and work that way. The remaining users are usually connected to the server but not actively using it most of the time.
Problem: drastic periodic slowdowns for the users of the database. Normal activities, like save or open files on the network now take place at a glacial pace, accompanied by the dreaded spinning beachball. All basic users are affected when this happens. Applications concerned are CC Adobe (Photoshop, Illustrator, InDesign), but that's what these basic users work with almost exclusively, so may be negligible. However, these applications are supposed to be quite chatty (phone home, automatic backup, etc.). Often but not always occurs towards the end of the day.
Comments: server restart usually clears the problem... until next time. So sometimes we are OK for a few days, sometimes not. No correlation is apparent with AFP or SMB connections. Server logs do not show everything that attracts my attention, but they are still quite enigmatic for mere mortals. Server.app statistics show very light server load to cpu (< 20%), memory (< 6 GB), network (< 25 MB/s). Activity Monitor shows no runaway process. Server disks SMART status is good. Basically, our Xserve hardware is in good shape and just stroll along most of the time.
At this point, I'm desperate for ideas or suggestions for a methodology arrive at a solution.
IME, you get these symptoms if the switch is down packages. AFP (I'm not sure about SMB) has a crucial ACK packet with a long (30 s IIRC) timeout for a reply. If your network loses the package, or its response, the customer just locks 30 seconds at a time. Packet-sniffing (tcpdump or wire Shark) with filters would demonstrate if that was the problem.
If your users have to deal with the volume of server as a local drive and open the files "in place" for editing and then performance is likely to be disappointing. It's much better from many points of view to download to a local drive, to do the work, then download again.
If you don't have it already, made your clocks menu display time in seconds and give each desktop a block notes and pen each make one not time displayed precise (HH) this beach balling happens. You can then refine the journal article, you must study and see if all the machines are affected at the same time.
I fought a problem like that for months. It has not been resolved until the network team replaces the HP switch with a Juniper one.
C.
-
Authorization failed and "accessing itunes store" maintains a loop
Hello
I have problem, first I can not connect to itunes store, can I remove the permission on this computer. But when I try to authorize dungeons failed and message "canned"accessing itunes store"loop. And after only 10 minutes I put warn something as "blah blah blah network connection has been lost. I have good connection and have no problem with any internet connection. There for 2 months I have a problem, I tried all of the solutions I found, but still I can't connect to itunes store.
I did the test proposed by Linc Davis, and the result is:
Check-out time: 12:54:10 06/22/16
Model identifier: MacPro5, 1
The system version: OS X 10.11.5 (15F34)
Kernel version: Darwin 15.5.0
Integrity of system protection: enabled
Since the start time: 02:05
SATA
WDC WD4003FZEX-00Z4SA0
Crucial_CT256MX100SSD1
WDC WD20EARS-19MVWB0
WDC WD40EZRX-00SPEB0
USB
Mouse USB LaserStream (TM) (Avago Technologies, Pte.)
Ultra (SanDisk Corporation)
boot args: nvda_drv = 1
Journal
June 22 at 11:55:24 Preview [1566] taken causing excessive Awakenings of the process. EXC_RESOURCE lost audio playback
Activity
NET: 892 in 46 (KiB/s)
The current downstream data: BitTorrent (UID 501) uses 652.857 KiB/s
The current data upstream: BitTorrent (UID 501) uses 25.9157 KiB/s
Memory: Adobe Photoshop (UID 501) use 5051 MB
kexts
com.nvidia.web.NVDAResmanWeb (10.1.1) UUID
com.nvidia.web.NVDAGK100HalWeb (10.1.1) UUID
com.nvidia.web.GeForceWeb (10.1.1) UUID
tc.tctechnologies.driver.Saffire (4.1.4 18735) UUID
com Apowersoft.driver.AudioDevice (1.6.7) UUID
com.focusrite.driver.FocusritePCIe (4.4.0 175) UUID
com.nvidia.CUDA (1.1.0) UUID
com Disc - soft.DAEMONTools.VirtualSCSIBus (1.0.2) UUID
Demons
com.macpaw.CleanMyMac3.Agent
com BlueStacks.AppPlayer.bstservice_helper
com Charlessoft.Pacifist.Helper
org.tcpdump.chmod_bpf
com.adobe.ARMDC.Communicator
com.transcend.RxRecoveryHelper
com NVIDIA. CUDA. Launcher
com.focusrite.ControlServer
com Elgato.eyeconnectd
com Microsoft.Office.Licensing.Helper
com RogueAmoeba.InstantOn - agent
com.google.Keystone.daemon
Adobe_Genuine_Software_Integrity_Service
com.adobe.SwitchBoard
Acronis.Update
com Disc - soft.DAEMONTools.PrivilegedHelper
com NVIDIA.nvroothelper
com.adobe.ARMDC.SMJobBlessHelper
com.Bombich.ccchelper
tc.tctechnologies.daemon.Saffire
Agents
com.google.Keystone.System.agent
com Disc - soft.DAEMONTools.DAEMONToolsAgent
com BlueStacks.AppPlayer.Service
com.bittorrent.BitTorrent
com.adobe.ARMDCHelper.UUID
com.adobe.CS5ServiceManager
com.macpaw.CleanMyMac3.Scheduler
com BlueStacks.AppPlayer.UninstallWatcher
com NVIDIA.nvagent
com Spotify.webhelper
com.tidal.LaunchHelper
com.nvidia.CUDASoftwareUpdate
com Acronis.Monitor
com BlueStacks.AppPlayer.Updater
launchd
/ System/Library/LaunchDaemons/com. Apple.Installer.osmessagetracing.plist
-com.apple.installer.osmessagetracing
/Library/LaunchAgents/com.Adobe.AAM.Updater-1.0.plist
-com.adobe.AAM.Startup - 1.0
/Library/LaunchAgents/com.Adobe.ARMDCHelper.UUID.plist
-com.adobe.ARMDCHelper.UUID
/Library/LaunchAgents/com.Adobe.CS5ServiceManager.plist
-com.adobe.CS5ServiceManager
/Library/LaunchAgents/com.Google.keystone.agent.plist
-com.google.keystone.system.agent
/ Library/LaunchAgents/com. NVIDIA. CUDASoftwareUpdate.plist
-com.nvidia.CUDASoftwareUpdate
/ Library/LaunchAgents/com. NVIDIA.nvagent.plist
-com.nvidia.nvagent
/ Library/LaunchDaemons/com. Acronis.Update.plist
-acronis.update
/Library/LaunchDaemons/com.Adobe.agsservice.plist
-Adobe_Genuine_Software_Integrity_Service
/Library/LaunchDaemons/com.Adobe.ARMDC.Communicator.plist
-com.adobe.ARMDC.Communicator
/Library/LaunchDaemons/com.Adobe.ARMDC.SMJobBlessHelper.plist
-com.adobe.ARMDC.SMJobBlessHelper
/Library/LaunchDaemons/com.Adobe.switchboard.plist
-com.adobe.SwitchBoard
/ Library/LaunchDaemons/com. BlueStacks.AppPlayer.bstservice_helper.plist
-com BlueStacks.AppPlayer.bstservice_helper
/Library/LaunchDaemons/com.Bombich.ccchelper.plist
-com.bombich.ccchelper
/ Library/LaunchDaemons/com. Charlessoft.Pacifist.Helper.plist
-com.charlessoft.pacifist.helper
/ Library/LaunchDaemons/com. Disc - Soft.DAEMONTools.PrivilegedHelper.plist
-com.disc - soft.DAEMONTools.PrivilegedHelper
/ Library/LaunchDaemons/com. Elgato.EyeConnect.plist
-com.elgato.eyeconnectd
/ Library/LaunchDaemons/com. Focusrite.ControlServer.plist
-com.focusrite.ControlServer
/Library/LaunchDaemons/com.Google.keystone.daemon.plist
-com.google.keystone.daemon
/Library/LaunchDaemons/com.macpaw.CleanMyMac3.agent.plist
-com.macpaw.CleanMyMac3.Agent
/ Library/LaunchDaemons/com. Microsoft.Office.Licensing.Helper.plist
-com.microsoft.office.licensing.helper
/ Library/LaunchDaemons/com. NVIDIA. CUDA. Launcher.plist
-com.nvidia.cuda.launcher
/ Library/LaunchDaemons/com. NVIDIA.nvroothelper.plist
-com.nvidia.nvroothelper
/ Library/LaunchDaemons/com. RogueAmoeba.InstantOn - agent.plist
-com.rogueamoeba.instanton - agent
/ Library/LaunchDaemons/com. Transcend.RxRecoveryHelper.plist
-com.transcend.RxRecoveryHelper
/Library/LaunchDaemons/org.tcpdump.chmod_bpf.plist
-org.tcpdump.chmod_bpf
/Library/LaunchDaemons/TC.tctechnologies.Saffire.plist
-tc.tctechnologies.daemon.Saffire
Library/LaunchAgents/com.acronis.monitor.plist
-com.acronis.monitor
Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
-com.adobe.AAM.Scheduler - 1.0
Library/LaunchAgents/com.bittorrent.BitTorrent.plist
-com.bittorrent.BitTorrent
Com/library/LaunchAgents. BlueStacks.AppPlayer.Service.plist
-com BlueStacks.AppPlayer.Service
Com/library/LaunchAgents. BlueStacks.AppPlayer.UninstallWatcher.plist
-com BlueStacks.AppPlayer.UninstallWatcher
Com/library/LaunchAgents. BlueStacks.AppPlayer.Updater.plist
-com BlueStacks.AppPlayer.Updater
Library/LaunchAgents/com.disc-soft.DAEMONTools.DAEMONToolsAgent.plist
-com.disc - soft.DAEMONTools.DAEMONToolsAgent
Library/LaunchAgents/com.macpaw.CleanMyMac3.Scheduler.plist
-com.macpaw.CleanMyMac3.Scheduler
Library/LaunchAgents/com.spotify.webhelper.plist
-com.spotify.webhelper
Startup items
/ Library/StartupItems/ProTec6b/DemoOver
/ Library/StartupItems/ProTec6b/Nalpeirond6b
/ Library/StartupItems/ProTec6b/ProTec6b
/Library/StartupItems/ProTec6b/StartupParameters.plist
Beams
/System/Library/Extensions/AuthenticationSupport.plugin
-com SecuritySolutions.AuthenticationSupport
/System/Library/Extensions/AuthenticationSupportEnabler.plugin
-com SecuritySolutions.AuthenticationSupportEnabler
/System/Library/Extensions/CUDA.kext
-com.nvidia.CUDA
/System/Library/Extensions/FocusriteUSBAudio.kext
-com.focusrite.driver.usb.audio
/System/Library/Extensions/GeForceAIRPluginWeb.bundle
-com.nvidia.web.GeForceAIRPluginWeb
/System/Library/Extensions/GeForceGLDriverWeb.bundle
-com.nvidia.web.GeForceGLDriverWeb
/System/Library/Extensions/GeForceMTLDriverWeb.bundle
-com.nvidia.web.GeForceMTLDriverWeb
/System/Library/Extensions/GeForceTeslaGAWeb.plugin
-com.nvidia.web.GeForceTeslaGAWeb
/System/Library/Extensions/GeForceTeslaGLDriverWeb.bundle
-com.nvidia.web.GeForceTeslaGLDriverWeb
/System/Library/Extensions/GeForceTeslaVADriverWeb.bundle
-com.nvidia.web.GeForceTeslaVADriverWeb
/System/Library/Extensions/GeForceTeslaWeb.kext
-com.nvidia.web.GeForceTeslaWeb
/System/Library/Extensions/GeForceVADriverWeb.bundle
-com.nvidia.web.GeForceVADriverWeb
/System/Library/Extensions/GeForceWeb.kext
-com.nvidia.web.GeForceWeb
/System/Library/Extensions/JMicronATA.kext
-com.jmicron.JMicronATA
/System/Library/Extensions/NovationUSBAudio.kext
-com.novationmusic.driver.usb.audio
/System/Library/Extensions/NVDAGF100HalWeb.kext
-com.nvidia.web.NVDAGF100HalWeb
/System/Library/Extensions/NVDAGK100HalWeb.kext
-com.nvidia.web.NVDAGK100HalWeb
/System/Library/Extensions/NVDAGM100HalWeb.kext
-com.nvidia.web.NVDAGM100HalWeb
/System/Library/Extensions/NVDANV50HalTeslaWeb.kext
-com.nvidia.web.NVDANV50HalTeslaWeb
/System/Library/Extensions/NVDAResmanTeslaWeb.kext
-com.nvidia.web.NVDAResmanTeslaWeb
/System/Library/Extensions/NVDAResmanWeb.kext
-com.nvidia.web.NVDAResmanWeb
/System/Library/Extensions/NVDAStartupWeb.kext
-com.nvidia.NVDAStartupWeb
/System/Library/Extensions/Saffire.kext
-tc.tctechnologies.driver.Saffire
/System/Library/Extensions/Soundflower.kext
-com Cycling74.Driver.Soundflower
/ Library/Apowersoft Mac Audio Recorder/uninstall Apowersoft Audio Recorder.app
Apowersoft.Uninstall - Apowersoft-Audio-recorder
/ Library/Audio/MIDI drivers/FocusritePCIeMIDIDriver.plugin
-com.focusrite.FocusritePCIe.midiplugin
/ Library/Audio/MIDI drivers/NIUSBMIDIDriver.plugin
S/O
/ Library/Audio/MIDI drivers/NovationUSBMIDIDriver.plugin
-com.novationmusic.driver.usb.midi
/ Library/Audio/MIDI drivers/SaffireMIDIDriver.plugin
-tc.tctechnologies.Saffire.midiplugin
/ Component library/Audio/Plug-Ins/components/Guitar Rig 5.
S/O
/Library/audio/plug-ins/components/iZInsightAUHook.component
-com.izotope.audioplugins.AU.Insight
/Library/audio/plug-ins/components/iZMeterTapAUHook.component
S/O
/Library/audio/plug-ins/components/iZOzone6AUHook.component
-com.izotope.audioplugins.AU.Ozone6
/Library/audio/plug-ins/components/iZOzone6DynamicsAUHook.component
-com.izotope.audioplugins.AU.Ozone6DYN
/Library/audio/plug-ins/components/iZOzone6DynEqAUHook.component
-com.izotope.audioplugins.AU.Ozone6DYNEQ
/Library/audio/plug-ins/components/iZOzone6EqualizerAUHook.component
-com.izotope.audioplugins.AU.Ozone6EQ
/Library/audio/plug-ins/components/iZOzone6ExciterAUHook.component
-com.izotope.audioplugins.AU.Ozone6EXC
/Library/audio/plug-ins/components/iZOzone6ImagerAUHook.component
-com.izotope.audioplugins.AU.Ozone6IMG
/Library/audio/plug-ins/components/iZOzone6MaximizerAUHook.component
-com.izotope.audioplugins.AU.Ozone6MAX
/Library/audio/plug-ins/components/iZRX5ConnectAUHook.component
-com.izotope.audioplugins.AU.RX5Connect
/Library/audio/plug-ins/components/iZRX5DeclickerAUHook.component
-com.izotope.audioplugins.AU.RX5Declicker
/Library/audio/plug-ins/components/iZRX5DeclipperAUHook.component
-com.izotope.audioplugins.AU.RX5Declipper
/Library/audio/plug-ins/components/iZRX5DecracklerAUHook.component
-com.izotope.audioplugins.AU.RX5Decrackler
/Library/audio/plug-ins/components/iZRX5DenoiserAUHook.component
-com.izotope.audioplugins.AU.RX5Denoiser
/Library/audio/plug-ins/components/iZRX5DereverbAUHook.component
-com.izotope.audioplugins.AU.RX5Dereverb
/Library/audio/plug-ins/components/iZRX5DialogueDenoiserAUHook.component
-com.izotope.audioplugins.AU.RX5DlgDenoiser
/Library/audio/plug-ins/components/iZRX5HumRemovalAUHook.component
-com.izotope.audioplugins.AU.RX5HumRemoval
/Library/audio/plug-ins/components/iZRX5MonitorAUHook.component
-com.izotope.audioplugins.AU.RX5Monitor
/Library/audio/plug-ins/HAL/FocusritePCIeAudio.driver
-com.focusrite.FocusritePCIeAudio
/Library/audio/plug-ins/HAL/InstantOn.driver
-com.rogueamoeba.InstantOn.driver
/ Library/Audio/Plug-Ins/VST/Guitar Rig 5. VST
S/O
/ Library/Audio/Plug-Ins/VST/iZotope Insight.vst
-com.izotope.audioplugins.VST.Insight
/ Library/Audio/Plug-Ins/VST/iZotope meter Tap.vst
S/O
/ Library/Audio/Plug-Ins/VST/iZotope Ozone 6 dynamic EQ.vst
-com.izotope.audioplugins.VST.Ozone6DYNEQ
/ Library/Audio/Plug-Ins/VST/iZotope Ozone 6 Dynamics.vst
-com.izotope.audioplugins.VST.Ozone6DYN
/ Library/Audio/Plug-Ins/VST/iZotope Ozone 6 Equalizer.vst
-com.izotope.audioplugins.VST.Ozone6EQ
/ Library/Audio/Plug-Ins/VST/iZotope Ozone 6 Exciter.vst
-com.izotope.audioplugins.VST.Ozone6EXC
/ Library/Audio/Plug-Ins/VST/iZotope Ozone 6 Imager.vst
-com.izotope.audioplugins.VST.Ozone6IMG
/ Library/Audio/Plug-Ins/VST/iZotope Ozone 6 Maximizer.vst
-com.izotope.audioplugins.VST.Ozone6MAX
/ Library/Audio/Plug-Ins/VST/iZotope Ozone 6. VST
-com.izotope.audioplugins.VST.Ozone6
/ Library/Audio/Plug-Ins/VST/iZotope RX 5 Connect.vst
-com.izotope.audioplugins.VST.RX5Connect
/ Library/Audio/Plug-Ins/VST/iZotope RX 5-click.vst
-com.izotope.audioplugins.VST.RX5Declicker
/ Library/Audio/Plug-Ins/VST/iZotope RX 5-clip.vst
-com.izotope.audioplugins.VST.RX5Declipper
/ Library/Audio/Plug-Ins/VST/iZotope RX 5-crackle.vst
-com.izotope.audioplugins.VST.RX5Decrackler
/ Library/Audio/Plug-Ins/VST/iZotope RX 5-UM .vst
-com.izotope.audioplugins.VST.RX5HumRemoval
/ Library/Audio/Plug-Ins/VST/iZotope RX 5-noise.vst
-com.izotope.audioplugins.VST.RX5Denoiser
/ Library/Audio/Plug-Ins/VST/iZotope RX 5-reverb.vst
-com.izotope.audioplugins.VST.RX5Dereverb
/ Library/Audio/Plug-Ins/VST/iZotope RX 5 Dialogue-noise.vst
-com.izotope.audioplugins.VST.RX5DlgDenoiser
/ Library/Audio/Plug-Ins/VST/iZotope RX 5 Monitor.vst
-com.izotope.audioplugins.VST.RX5Monitor
/ Library/Audio/Plug-Ins/VST3/iZotope Insight.vst3
-com.izotope.audioplugins.VST.Insight
/ Library/Audio/Plug-Ins/VST3/iZotope meter Tap.vst3
S/O
/ Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 dynamic EQ.vst3
-com.izotope.audioplugins.VST.Ozone6DYNEQ
/ Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 Dynamics.vst3
-com.izotope.audioplugins.VST.Ozone6DYN
/ Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 Equalizer.vst3
-com.izotope.audioplugins.VST.Ozone6EQ
/ Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 Exciter.vst3
-com.izotope.audioplugins.VST.Ozone6EXC
/ Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 Imager.vst3
-com.izotope.audioplugins.VST.Ozone6IMG
/ Library/Audio/Plug-Ins/VST3/iZotope Ozone 6 Maximizer.vst3
-com.izotope.audioplugins.VST.Ozone6MAX
/ Library/Audio/Plug-Ins/VST3/iZotope Ozone 6.vst3
-com.izotope.audioplugins.VST.Ozone6
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5 Connect.vst3
-com.izotope.audioplugins.VST.RX5Connect
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5-click.vst3
-com.izotope.audioplugins.VST.RX5Declicker
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5-clip.vst3
-com.izotope.audioplugins.VST.RX5Declipper
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5-crackle.vst3
-com.izotope.audioplugins.VST.RX5Decrackler
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5-UM .vst3
-com.izotope.audioplugins.VST.RX5HumRemoval
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5-noise.vst3
-com.izotope.audioplugins.VST.RX5Denoiser
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5-reverb.vst3
-com.izotope.audioplugins.VST.RX5Dereverb
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5 Dialogue-noise.vst3
-com.izotope.audioplugins.VST.RX5DlgDenoiser
/ Library/Audio/Plug-Ins/VST3/iZotope RX 5 Monitor.vst3
-com.izotope.audioplugins.VST.RX5Monitor
/Library/components/FLACAudioCodec.component
-com.mycompany.myformat
/Library/components/FLACAudioFileComponent.component
-com.Acme.audio.files.Components
/Library/Extensions/Apowersoft_AudioDevice.kext
-com Apowersoft.driver.AudioDevice
/Library/Extensions/FocusritePCIe.kext
-com.focusrite.driver.FocusritePCIe
/Library/Extensions/NIUSBAudioDriver.kext
-com.caiaq.driver.NIUSBHardwareDriver
/Library/Extensions/NIUSBGuitarRigMobile.kext
-com.caiaq.driver.NIUSBGuitarRigMobileDriver
/ / Library/Internet Plug-Ins/AdobeAAMDetect.plugin
-com AdobeAAMDetectLib.AdobeAAMDetect
/ / Library/Internet Plug-Ins/AdobePDFViewer.plugin
-com.adobe.acrobat.pdfviewer
/ / Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
-com.adobe.acrobat.pdfviewerNPAPI
/ / Library/Internet Plug-Ins/JavaAppletPlugin.plugin
-com.apple.java.JavaAppletPlugin
/ / Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
-com.microsoft.sharepoint.browserplugin
/ / Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
-com.microsoft.sharepoint.webkitplugin
/ / Library/Internet Plug-Ins/Silverlight.plugin
-com.microsoft.SilverlightPlugin
/ Library/PreferencePanes/CUDA Preferences.prefPane
-com.nvidia.CUDAPref
/Library/PreferencePanes/EyeConnect.prefPane
-com.elgato.preference.EyeConnect
/Library/PreferencePanes/MacFUSE.prefPane
-com.google.MacFUSE
/Library/PreferencePanes/NIUSBAudio.prefPane
-com.caiaq.NIUSBAudioPreferencePane
/Library/PreferencePanes/NTFS-3G.prefPane
-org.catacombae.macntfs - 3 g .prefpane
/Library/PreferencePanes/NTFSforMacOSX.prefPane
-com.paragon - software.filesystems.ntfs.prefpanel
/ Library/PreferencePanes/NVIDIA Driver Manager.prefPane
-com.nvidia.nvprefpane
/Library/PreferencePanes/OSXFUSE.prefPane
-com.github.osxfuse.OSXFUSEPrefPane
/ Library/ScriptingAdditions/Adobe unit Types.osax
S/O
Library/Audio/Plug-Ins/VST/AU/iZInsightAUHook.component
-com.izotope.audioplugins.AU.Insight
Library/Audio/Plug-Ins/VST/AU/iZRX5ConnectAUHook.component
-com.izotope.audioplugins.AU.RX5Connect
Library/Audio/Plug-Ins/VST/AU/iZRX5DeclickerAUHook.component
-com.izotope.audioplugins.AU.RX5Declicker
Library/Audio/Plug-Ins/VST/AU/iZRX5DeclipperAUHook.component
-com.izotope.audioplugins.AU.RX5Declipper
Library/Audio/Plug-Ins/VST/AU/iZRX5DecracklerAUHook.component
-com.izotope.audioplugins.AU.RX5Decrackler
Library/Audio/Plug-Ins/VST/AU/iZRX5DenoiserAUHook.component
-com.izotope.audioplugins.AU.RX5Denoiser
Library/Audio/Plug-Ins/VST/AU/iZRX5DereverbAUHook.component
-com.izotope.audioplugins.AU.RX5Dereverb
Library/Audio/Plug-Ins/VST/AU/iZRX5DialogueDenoiserAUHook.component
-com.izotope.audioplugins.AU.RX5DlgDenoiser
Library/Audio/Plug-Ins/VST/AU/iZRX5HumRemovalAUHook.component
-com.izotope.audioplugins.AU.RX5HumRemoval
Library/Audio/Plug-Ins/VST/AU/iZRX5MonitorAUHook.component
-com.izotope.audioplugins.AU.RX5Monitor
Library/Audio/Plug-Ins/VST/iZotope RX 5 Audio Editor.app
-com.izotope.audioapps.rx5
Library/Audio/Plug-Ins/VST/RTAS/iZInsightPTHook.dpm
-com.izotope.audioplugins.PT.Insight
Library/Audio/Plug-Ins/VST/RTAS/iZRX5AmbienceMatchPTHook.dpm
-com.izotope.audioplugins.PT.RX5AmbienceMatch
Library/Audio/Plug-Ins/VST/RTAS/iZRX5ConnectPTHook.dpm
-com.izotope.audioplugins.PT.RX5Connect
Library/Audio/Plug-Ins/VST/RTAS/iZRX5DeclickerPTHook.dpm
-com.izotope.audioplugins.PT.RX5Declicker
Library/Audio/Plug-Ins/VST/RTAS/iZRX5DeclipperPTHook.dpm
-com.izotope.audioplugins.PT.RX5Declipper
Library/Audio/Plug-Ins/VST/RTAS/iZRX5DecracklerPTHook.dpm
-com.izotope.audioplugins.PT.RX5Decrackler
Library/Audio/Plug-Ins/VST/RTAS/iZRX5DenoiserPTHook.dpm
-com.izotope.audioplugins.PT.RX5Denoiser
Library/Audio/Plug-Ins/VST/RTAS/iZRX5DereverbPTHook.dpm
-com.izotope.audioplugins.PT.RX5Dereverb
Library/Audio/Plug-Ins/VST/RTAS/iZRX5DialogueDenoiserPTHook.dpm
-com.izotope.audioplugins.PT.RX5DlgDenoiser
Library/Audio/Plug-Ins/VST/RTAS/iZRX5HumRemovalPTHook.dpm
-com.izotope.audioplugins.PT.RX5HumRemoval
Library/Audio/Plug-Ins/VST/RTAS/iZRX5MonitorPTHook.dpm
-com.izotope.audioplugins.PT.RX5Monitor
Insight.vst Library/Audio/Plug-Ins/VST/VST/iZotope
-com.izotope.audioplugins.VST.Insight
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5 Connect.vst
-com.izotope.audioplugins.VST.RX5Connect
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-click.vst
-com.izotope.audioplugins.VST.RX5Declicker
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-clip.vst
-com.izotope.audioplugins.VST.RX5Declipper
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-crackle.vst
-com.izotope.audioplugins.VST.RX5Decrackler
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-UM .vst
-com.izotope.audioplugins.VST.RX5HumRemoval
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-noise.vst
-com.izotope.audioplugins.VST.RX5Denoiser
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5-reverb.vst
-com.izotope.audioplugins.VST.RX5Dereverb
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5 Dialogue-noise.vst
-com.izotope.audioplugins.VST.RX5DlgDenoiser
RX Library/Audio/Plug-Ins/VST/VST/iZotope 5 Monitor.vst
-com.izotope.audioplugins.VST.RX5Monitor
Insight.vst3 Library/Audio/Plug-Ins/VST/VST3/iZotope
-com.izotope.audioplugins.VST.Insight
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5 Connect.vst3
-com.izotope.audioplugins.VST.RX5Connect
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-click.vst3
-com.izotope.audioplugins.VST.RX5Declicker
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-clip.vst3
-com.izotope.audioplugins.VST.RX5Declipper
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-crackle.vst3
-com.izotope.audioplugins.VST.RX5Decrackler
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-UM .vst3
-com.izotope.audioplugins.VST.RX5HumRemoval
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-noise.vst3
-com.izotope.audioplugins.VST.RX5Denoiser
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5-reverb.vst3
-com.izotope.audioplugins.VST.RX5Dereverb
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5 Dialogue-noise.vst3
-com.izotope.audioplugins.VST.RX5DlgDenoiser
RX Library/Audio/Plug-Ins/VST/VST3/iZotope 5 Monitor.vst3
-com.izotope.audioplugins.VST.RX5Monitor
Library/Caches/com.apple.Safari/Extensions/AdBlock-2.safariextension
-com.betafish.adblockforsafari
Library/Caches/com.apple.Safari/Extensions/Auto Refresh.safariextension
-com.agriffindesign.autorefresh
Library/Caches/com.apple.Safari/Extensions/Hide & 2.safariextension - search
-net.roopc.hideandseekformac
Library/Caches/com.apple.Safari/Extensions/IncognIt VPN Switcher.safariextension
-com.incogniteam.safari.switcher
Library/Caches/com.apple.Safari/Extensions/YoutubeWide.safariextension
-com.pedrocc.youtubewide
Library/Services/ToastIt.service
-com.roxio.ToastItService
dylibs
/usr/lib/libUFSDNTFS.dylib
Content of/etc/hosts (UTF-8 Unicode English text)
127.0.0.1 localhost
255.255.255.255 broadcasthost
: 1 localhost
FE80::1% lo0 localhost
0.0.0.0 www.rogueamoeba.com
127.0.0.1 www.rogueamoeba.com
127.0.0.1 www.adobe.com
127.0.0.1 hl2rcv.adobe.com
127.0.0.1 t3dns.adobe.com
127.0.0.1 3dns - 1.adobe.com
127.0.0.1 3dns - 2.adobe.com
127.0.0.1 3dns - 3.adobe.com
127.0.0.1 3dns - 4.adobe.com
127.0.0.1 activate.adobe.com
127.0.0.1 activate - sea.adobe.com
127.0.0.1 activate - sjc0.adobe.com
127.0.0.1 activate.wip.adobe.com
127.0.0.1 activate.wip1.adobe.com
127.0.0.1 activate.wip2.adobe.com
127.0.0.1 activate.wip3.adobe.com
127.0.0.1 activate.wip4.adobe.com
127.0.0.1 adobe - dns.adobe.com
127.0.0.1 adobe-dns - 1.adobe.com
127.0.0.1 adobe-dns - 2.adobe.com
127.0.0.1 adobe-dns - 3.adobe.com
.. .and 63 more line (s)
Content of /etc/pf.conf
scrub-anchor "com.apple / * '.
NAT-anchor "com.apple / * '.
RDR-anchor "com.apple / * '.
dummynet-anchor "com.apple / * '.
Anchor "com.apple / * '.
load the "com.apple" anchor of "/ etc/pf.anchors/com.apple".
Content of/etc/syslog.conf
install.* @127.0.0.1:32376
Content of /etc/pam.d/authorization
Pam_krb5.so AUTH optional use_kcminit use_first_pass
AUTH pam_ntlm.so optional use_first_pass
AUTH required pam_opendirectory.so use_first_pass nullok
account required pam_opendirectory.so
Content of /etc/pam.d/checkpw
AUTH required pam_opendirectory.so use_first_pass nullok
account required pam_opendirectory.so no_check_home no_check_shell
Content of /etc/pam.d/chkpasswd
AUTH required pam_opendirectory.so
account required pam_opendirectory.so
password required pam_permit.so
session required pam_permit.so
Content of /etc/pam.d/cups
AUTH required pam_opendirectory.so
account required pam_permit.so
password required pam_deny.so
session required pam_permit.so
Content of /etc/pam.d/ftpd
AUTH required pam_opendirectory.so
account required pam_permit.so
password required pam_deny.so
session required pam_permit.so
Contents of /etc/pam.d/login
Pam_krb5.so AUTH optional use_kcminit
AUTH pam_ntlm.so optional try_first_pass
AUTH pam_mount.so optional try_first_pass
AUTH required pam_opendirectory.so try_first_pass
account required pam_nologin.so
account required pam_opendirectory.so
pam_opendirectory.so password required
session required pam_launchd.so
session required pam_uwtmp.so
session pam_mount.so in option
Content of /etc/pam.d/login.term
account required pam_nologin.so
account required pam_opendirectory.so
session required pam_uwtmp.so
Content of /etc/pam.d/other
AUTH required pam_deny.so
pam_deny.so account required
password required pam_deny.so
session required pam_deny.so
Content of /etc/pam.d/passwd
AUTH required pam_permit.so
account required pam_opendirectory.so
pam_opendirectory.so password required
session required pam_permit.so
Content of /etc/pam.d/rshd
AUTH required pam_permit.so
account required pam_nologin.so
account required pam_opendirectory.so
session required pam_launchd.so
Content of /etc/pam.d/screensaver
Pam_krb5.so AUTH optional use_kcminit use_first_pass
AUTH required pam_opendirectory.so use_first_pass nullok
account required pam_opendirectory.so
account sufficient pam_self.so
Group accounts required pam_group.so no_warn = admin, wheel fail_safe
account required pam_group.so no_warn deny group = admin, wheel ruser fail_safe
Content of /etc/pam.d/smbd
account of the sacl_service pam_sacl.so = allow_trustacct smb
session required pam_permit.so
Content of /etc/pam.d/sshd
Pam_krb5.so AUTH optional use_kcminit
AUTH pam_ntlm.so optional try_first_pass
AUTH pam_mount.so optional try_first_pass
AUTH required pam_opendirectory.so try_first_pass
account required pam_nologin.so
account of the sacl_service pam_sacl.so = ssh
account required pam_opendirectory.so
pam_opendirectory.so password required
session required pam_launchd.so
session pam_mount.so in option
Content of /etc/pam.d/su
AUTH sufficient pam_rootok.so
AUTH required pam_opendirectory.so
Group accounts required pam_group.so no_warn = admin, wheel tweak root_only fail_safe
no_check_shell account required pam_opendirectory.so
pam_opendirectory.so password required
session required pam_launchd.so
Content of /etc/pam.d/sudo
AUTH required pam_opendirectory.so
account required pam_permit.so
password required pam_deny.so
session required pam_permit.so
Content of /etc/periodic/daily/110.clean-tmps
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_clean_tmps_enable' in
[AA] [Ee] [Ss])
If [-z "$daily_clean_tmps_days"]
then
echo ' $daily_clean_tmps_enable is defined, but '.
"$daily_clean_tmps_days is not.
RC = 2
on the other
ECHO «»
echo "deleting old temporary files:
Set f noglob
args = ""-atime $daily_clean_tmps_days - mtime + $daily_clean_tmps_days ""
args = "${args} - ctime + $daily_clean_tmps_days.
dargs = "- empty - mtime + $daily_clean_tmps_days"
dargs = "${dargs}! "- name .vfs_rsrc_streams_."
[n "$daily_clean_tmps_ignore"] & & {}
args = "$args '" echo "${daily_clean_tmps_ignore %} ' |" ' "
sed / [] [] * / ! -name/g "
dargs = "$dargs '" echo "${daily_clean_tmps_ignore %} ' |" ' "
sed / [] [] * / ! -name/g "
.. .and 21 more line (s)
Content of /etc/periodic/daily/130.clean-msgs
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_clean_msgs_enable' in
[AA] [Ee] [Ss])
If [! d/var/msgs]
then
echo ' $daily_clean_msgs_enable has the value but msgs/var / ' \.
"does not exist".
RC = 2
on the other
ECHO «»
echo "cleaning of the old ads system:
[n '$daily_clean_msgs_days'] & &
ARG =-${daily_clean_msgs_days #-} | ARG =
GSM-c $arg & & rc = 0 | RC = 3
FI;
*) rc = 0;
ESAC
output $rc
Content of /etc/periodic/daily/140.clean-rwho
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_clean_rwho_enable' in
[AA] [Ee] [Ss])
If [-z "$daily_clean_rwho_days"]
then
echo ' $daily_clean_rwho_enable is activated but '.
"$daily_clean_rwho_days is not defined.
RC = 2
Elif [! d/var/rwho(1)]
then
echo "$daily_clean_rwho_enable is enabled but/var/rwho(1)."------
"does not exist".
RC = 2
on the other
ECHO «»
echo "deleting obsolete files in/var/rwho(1):
case '$daily_clean_rwho_verbose' in
[AA] [Ee] [Ss])
print = -.
*)
print =;
.. .and 14 more line (s)
Content of /etc/periodic/daily/199.clean-fax
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
If [/ var/spool/fax - d]; then
ECHO «»
echo "deleting files fax scratch."
CD/var/spool/fax & & \
To find. -type f-name ' [0-9] *. [0-9] [0-9] [0-9] "- mtime + 7 - delete > / dev/null 2 > & 1;"
FI
Content of /etc/periodic/daily/310.accounting
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_accounting_enable' in
[AA] [Ee] [Ss])
If [!] ACCT - f]
then
echo '$daily_accounting_enable has the value but ACCT '.
"does not exist".
RC = 2
Elif [-z "$daily_accounting_save"]
then
echo ' $daily_accounting_enable is defined, but '.
"$daily_accounting_save is not.
RC = 2
on the other
ECHO «»
echo "accounting log rotation and collection of statistics:
CD/var/account
RC = 0
n = $daily_accounting_save
RM f ACCT. $ ACCT n.gz. $n || RC = 3
m = $n
.. .and 18 several line (s)
Content of /etc/periodic/daily/400.status-disks
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_status_disks_enable' in
[AA] [Ee] [Ss])
ECHO «»
echo "record status:
DF $daily_status_disks_df_flags & & rc = 1 | RC = 3
;;
*) rc = 0;
ESAC
output $rc
Content of /etc/periodic/daily/420.status-network
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_status_network_enable' in
[AA] [Ee] [Ss])
ECHO «»
echo "State of the network interface:
case '$daily_status_network_usedns' in
[AA] [Ee] [Ss])
netstat-i & & rc = 0 | RC = 3;
*)
netstat - in & & rc = 0 | RC = 3;
ESAC;
*) rc = 0;
ESAC
output $rc
Content of /etc/periodic/daily/430.status-rwho
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$daily_status_rwho_enable' in
[AA] [Ee] [Ss])
RWHO(1) = $(echo/var/rwho / *)
If [f ' ${rwho(1) % *} "]
then
ECHO «»
echo "the system of Local network status:
PROG = ruptime
on the other
ECHO «»
echo "Local System State:
PROG = running time
FI
RC = $($prog | tee/dev/stderr | wc-l)
If [$?-eq 0]
then
[$rc - gt 1] & & rc = 1
on the other
RC = 3
FI;
.. .and 3 more lines
Content of /etc/periodic/daily/999.local
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
RC = 0
script in $daily_local
do
echo "
case '$script' in
/*)
If [f "$script"]
then
echo "Running $script:
sh $script | RC = 3
on the other
echo "$script: no file.
[$rc - lt 2] & & CR = 2
FI;
*)
echo "$script: not an absolute path.
[$rc - lt 2] & & CR = 2;
ESAC
fact
output $rc
Content of /etc/periodic/monthly/199.rotate-fax
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
ECHO «»
printf %s "rotation of the fax log files:
CD/var/log/fax
I'm in * .log; do
If [f ' ${i} "]; then
echo-n "$i".
If [x - / usr/bin/gzip]; then gzext = ".gz". else gzext =""; FI
If [f ' ${i} $.3 {gzext} "]; then mv-f "${i} $.3 {gzext}" "${i}.4$ {gzext}"; FI
If [f ' ${i} $.2 {gzext} "]; then mv-f "${i} $.2 {gzext}" "${i} $.3 {gzext}"; FI
If [f ' ${i}.1$ {gzext} "]; then mv-f "${i}.1$ {gzext}" "${i} $.2 {gzext}"; FI
If [f ' ${i}.0$ {gzext} "]; then mv-f "${i}.0$ {gzext}" "${i}.1$ {gzext}"; FI
If [f ' ${i} "]; then mv-f "${i}" "${i}.0" & & if [x - / usr/bin/gzip]; then gzip-9 "${i}.0. FI; FI
Touch "${i}" & & chmod 640 ' ${i} "& & chown root: admin" ${i} ".
FI
fact
ECHO «»
Content of /etc/periodic/monthly/200.accounting
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
oldmask = $(umask)
umask 066
case '$monthly_accounting_enable' in
[AA] [Ee] [Ss])
W = / var/log/wtmp
RC = 0
Remove = NO
If [$rc - eq 0]
then
ECHO «»
echo "doing the accounting of connection:
RC = $(ac-p |) Sort - nr k 2 | Tee/dev/stderr. WC - l)
[$rc - gt 0] & & rc = 1
FI
[$remove = YES] & & rm-f $W.0;
*) rc = 0;
ESAC
umask $oldmask
output $rc
Content of /etc/periodic/monthly/999.local
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
RC = 0
script in $monthly_local
do
echo "
case '$script' in
/*)
If [f "$script"]
then
echo "Running $script:
sh $script | RC = 3
on the other
echo "$script: no file.
[$rc - lt 2] & & CR = 2
FI;
*)
echo "$script: not an absolute path.
[$rc - lt 2] & & CR = 2;
ESAC
fact
output $rc
Content of /etc/periodic/weekly/320.whatis
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
case '$weekly_whatis_enable' in
[AA] [Ee] [Ss])
ECHO «»
echo "reconstruction whatis database:
MANPATH ='/ usr/bin/manpath - q'
If [$? = 0]
then
If [-z "${MANPATH}"]
then
echo "manpath impossible to find directories manpage.
RC = 3
on the other
RC = 0
/usr/libexec/makewhatis.local "${MANPATH}" | RC = 3
If [X "${man_locales}"! = X]
then
I'm in ${man_locales}
do
LC_ALL = $i /usr/libexec/makewhatis.local - a------.
-L "${MANPATH}" | RC = 3
.. .and 9 more line (s)
Content of /etc/periodic/weekly/999.local
If [r - etc/defaults/periodic.conf]
then
. /etc/defaults/periodic.conf
source_periodic_confs
FI
RC = 0
script in $weekly_local
do
echo "
case '$script' in
/*)
If [f "$script"]
then
echo "Running $script:
sh $script | RC = 3
on the other
echo "$script: no file.
[$rc - lt 2] & & CR = 2
FI;
*)
echo "$script: not an absolute path.
[$rc - lt 2] & & CR = 2;
ESAC
fact
output $rc
Contents of the /Library/Preferences/com.apple.security.appsandbox.plist (text of XML document)
<? XML version = "1.0" encoding = "UTF-8"? >
<! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""
< plist version = "1.0" >
< dict >
< key > UnrestrictSpotlightContainerScope < / key >
< true / >
< / dict >
< / plist >
Contents of the /Library/Preferences/SystemConfiguration/com.apple.Boot.plist (text of XML document)
<? XML version = "1.0" encoding = "UTF-8"? >
<! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""
< plist version = "1.0" >
< dict >
Flags kernel < key > < / key >
< string > < / string >
< / dict >
< / plist >
Problems of fonts: 57
Listeners
launchd: afpovertcp
launchd: afpovertcp
launchd: microsoft-ds
launchd: microsoft-ds
KDC: kerberos
Safari extensions
AdBlock
Auto Refresh
Hide & Seek
IncognIt VPN switch
YoutubeWide
Restricted file: 706
Senior leaders
Office: 255
Time elapsed (s): 246
Hi dedidude,
Thank you for using communities Support from Apple. I know it's important to be able to use iTunes to access your media, so I'm happy to provide advice to connect to the iTunes Store again.
To resolve this, see the steps that we have in our articles here:
If you cannot connect to the iTunes Store
Advanced steps for fixing problems with the iTunes Store connection
Have a great rest of your day, cheers!
-
DNS server records to monitor traffic.
I do not understand much about it so I hope someone can explain to me.
I have a server configured with a DNS server running successfully on my mac mini (dns primary server for the House).
I was wondering if there is a way to capture the DNS server logs and monitor visited Web sites of specific host ips/name?
I don't have an example to make immediately available, and I expect that it will be the analysis or an output channel created manually or otherwise searching the DNS server connects.
If your firewall blocks all outgoing DNS traffic except for DNS queries on the server (this is to avoid without entering the DNS server, register via VPN or other), you can turn on extra logging through the command line, and then check the DNS server logs.
This configuration is probably more commonly implemented with either a network sniffer I look for DNS queries arriving at your server, or perhaps a web proxy server, as this proxy server gets you the customer information and the target host information, as it won't be all kinds of activities related to the web-is in the DNS for a typical client newspapers.
Activity network Apps, app updates (various which may seem HTTPS traffic, too), multiple streams of data, etc.
HTTPS and VPN can throw a key in these listening and data collection activities, unfortunately. They can hide the access or hide the DNS query, according to the monitored computers.
There are approaches especially here, including the firewall of filtering (or notation) and the mechanisms of OS X such as Parental controls, depending on the specific details of your needs here. There are examples posted around the network to use Wireshark or tcpdump to acquire the DNS of your network data, as well.
Details on the management of the BIND 9 command line - i.e. when there is hair - are available in the ISC BIND documentation, such as 9.10. Find statement grammar and record the setting up an output channel, as a starting point.
For recent versions of OS X Server, BIND configuration files are under/Library/Server. (See this discussion, as well.)
Changes to the configuration files can sometimes fail.app, unfortunately. Close.app, make the changes to a copy of the file, then restart.app (and I hope Server.app don't spill or undo your changes).
-
MacBook Pro slow since El Capitan upgrade
Hello - My machine is several seconds or laggy since update to El Capitan. I have done first aid in the new disk utility and restarted several times with a few improvements, but things are still running slower than on Yosemite. Any ideas? Here is my EtreCheck:
EtreCheck version: 2.7.2 (232)
Report generated 2016-01-15 23:14:26
Download http://etrecheck.com EtreCheck
Time 01:27
Performance: Excellent
Click the [Support] links to help with non-Apple products.
Click the [details] links for more information on this line.
Click the [Scan for adware] links help to remove the adware.
Problem: The computer is too slow
Hardware information: ⓘ
MacBook Pro (15-inch, mid-2012)
[Technical details] - [User Guide] - [Warranty & Service]
MacBook Pro - model: MacBookPro9, 1
1 2.6 GHz Intel Core i7 CPU: 4 strands
8 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 4 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 4 GB DDR3 1600 MHz
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 1487 - SN = D86225200GKDGDLBQ
Video information: ⓘ
Graphics Intel HD 4000
Color LCD 1680 x 1050
NVIDIA GeForce GT 650M - VRAM: 1024 MB
System software: ⓘ
OS X El Capitan 10.11.2 15 c (50) - since startup time: less than an hour
Disk information: ⓘ
SM128E SSD APPLE disk0: (121,33 GB) (Solid State - TRIM: Yes)
EFI (disk0s1)
: 210 MB HD (disk0s3)
[recovery] recovery: 650 MB MacBook Pro (disk1) /: 120,10 (Go 24,28 free)
Storage of carrots: disk0s2 120.47 GB Online
MATSHITADVD-R UJ - 8À8)
USB information: ⓘ
Apple Inc. FaceTime HD camera (built-in)
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Information crush: ⓘ
Apple Inc. Thunderbolt_bus.
Goalkeeper: ⓘ
Mac App Store and identified developers
Adware: ⓘ
Adware infection possible. [Search the adware]
Kernel Extensions: ⓘ
/ System/Library/Extensions
com.Focusrite.driver.usb2audio [no charge] (1.5-10.6 SDK) [Support]
Launch officers: ⓘ
[ongoing] com.brother.LOGINserver.plist [Support]
✓ com.oracle.java.Java - Updater.plist [loading] [Support]
Launch of the demons: ⓘ
✓ com.adobe.fpsaud.plist [loading] [Support]
✓ com.barebones.authd.plist [loading] [Support]
✓ com.bombich.ccc.plist [loading] [Support]
✓ com.bombich.ccchelper.plist [loading] [Support]
✓ [ongoing] com.cleverfiles.cfbackd.plist [Support]
✓ com.malwarebytes.MBAMHelperTool.plist [loading] [Support]
✓ com.oracle.java.Helper - Tool.plist [loading] [Support]
org.tcpdump.chmod_bpf.plist [loading] [Support]
Launch User Agents: ⓘ
✓ com.google.keystone.agent.plist [loading] [Support]
[ongoing] org.XBMC.helper.plist [Support]
User login items: ⓘ
iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Find another shortcut to file Application (/ Applications/Utilities/find all File.app/Contents/Library/LoginItems/Find all Hotkey.app file)
Other applications: ⓘ
[ongoing] com.brother.utility.NETserver.352
[ongoing] com.brother.utility.USBserver.97632
[ongoing] com.etresoft.EtreCheck.12512
[ongoing] org.Mozilla.Firefox.53472
[ongoing] org.Tempel.findanyfile.hotkey.74592
Internet Plug-ins: ⓘ
FlashPlayer - 10.6: Version: 20.0.0.267 - 10.6 SDK [Support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 20.0.0.267 - 10.6 SDK [Support]
Default browser: Version: 601 - SDK 10.11
PepperFlashPlayer: Version: 20.0.0.267 - 10.6 SDK [Support]
Silverlight: Version: 5.1.40728.0 - 10.6 SDK [Support]
JavaAppletPlugin: Version: version check Java 8 66 17 construction update
The Safari Extensions: ⓘ
FastestTube
ClickToPlugin
Audio plug-ins: ⓘ
DVCPROHDAudio: Version: 1.3.2
3rd party preference panes: ⓘ
Flash Player [Support]
Java [Support]
Time Machine: ⓘ
Skip system files: No.
Mobile backups: OFF
Automatic backup: NON - automatic backup disabled
Volumes to back up:
MacBook Pro: Disc size: 120,10 GB disc used: 95,82 GB
Destinations:
MBP-backup [Local]
Total size: 142,21 GB
Total number of backups: 5
An older backup: 29/04/14, 15:43
Last backup: 04/12/14, 12:09 AM
Backup disk size: too small
Backup size 142,21 GB< (disk="" used="" 95.82="" gb="" x="">
Top of page process CPU: ⓘ
Firefox 8%
6% WindowServer
4% kernel_task
3% hidd
1% fontd
Top of the process of memory: ⓘ
675 MB kernel_task
500 MB firefox
Ocspd 238 MB
ICDD 164 MB
156MO WindowServer
Information about virtual memory: ⓘ
1.61 GB of free RAM
6.38 GB used RAM (1.76 GB being cached)
Used Swap 0 B
Diagnostic information: ⓘ
January 15, 2016, 23:04:59 self-test - spent
January 15, 2016, 21:34:02 /Library/Logs/DiagnosticReports/Mail_2016-01-15-213402_[redacted].hang
/Applications/mail.app/Contents/MacOS/mail
January 15, 2016, 21:09:17 ~/Library/Logs/DiagnosticReports/pkd_2016-01-15-210917_[redacted].crash
/ usr/libexec/PKD
Try a boot course and see there is a difference:
https://support.Apple.com/en-us/HT201262
Thought that it reads 'normal', in 1487 cycles a battery is warranted. Stacks of old, used often expand and can damage a MBP.
Ciao.
-
Are not relayed queries ARP on bridged Airport Extreme
I have a router Xfinity and set up Airport extreme as a router jumpered to connect LAN devices on a different floor.
Looking at network traffic, I noticed that the ARP requests are delayed or not relayed on the router bridge making it appear that these devices are offline. These applications should get relayed? Is there a special way to configure this option to get there?
I used tcpdump to monitor network traffic.
It is one of these small problems that make it difficult to use sometimes Apple routers... ARP is a problem.
Apple recommended using the extreme double NAT... I don't like it, but you can see why.
I recommend using static IP approach.
Re: time capsule Airport Guard disconnection
You sound like you know what you're doing, so it's not difficult for a person with some networks nouse.
Post again if you find this difficult.
One thing I added is the default domain in the Airport extreme is local and it seems never even change in bridge... I doubt that you can change the domain of the Xfinity router setting but if you can do then. Do local as well since you can not change the configuration of the router from apple.
Finally if you still want to use the bridge... try connecting to the WAN port ethernet port LAN of the extreme... In bridge WAN is connected to the local network, but it may be less accurate in bridge, you can even set a static IP address and with the connection to the LAN port ethernet customers should get all the information directly from the Xfinity... If your extreme is the KT model... There is definitely something wrong with the extreme WAN.
-
Liebe Foren-user,
ICH möchte like einen Port Switch SRW2016 "monitors" (second later mirror-Port). Dazu habe ich einen Rechner mit und tcpdump aufgesetzt, diesen a debian Port einen angeschlossen (den probe-Port). As soon as ich über das Web Interface Linksys-switches switch unter meines-> Port Mirroring den mirror-Port auf den spiegeln tired (both Directions) Port probe, ist tot practical der probe-Port. ICH kann vom Debian-Rechner aus nichts mehr pingen (auch nicht den Linksys Switch), er kriegt keinen release DCHP mehr und er ist auch nicht mehr aus dem Netzwerk reached normal. Konnte damit ich ja notfalls leben, however scheint überhaupt kein mehr auf dem probe-Port anzukommen traffic. Tcpdump shows mir keinen traffic one.
Mache ich irgendwas please? Sind die Einstellmoglichkeiten zum Port-Mirroring am State ja, ich SOMIT fits Linksys, actually nicht viel outlined machen zu können. Equivalent Passagen im hab ich naturally read manual.
Vielen Dank und Grüße
Tobel
Von your description wird nicht klar, wie das MIrroring exakt adjusted did.
Der 'Source' Port is the Port the system want to play, wo der d.h. den "Original"-Verkehr drüber geht. "."
Der 'Target' Port is the Port, auf die in den packages kopiert werden, d.h. sleeps schliesst tcpdump mit den of the computer one.
Buyed is, dass die Netzwerkkarte am target Port both adjusted ist, dass sie alle frames akzeptiert. Frames usually werden ja alle, die nicht die loading MAC address verworfen haben.
Also hat computer der über den Port target keine connection. Target akzeptiert keine der-Port frames. ER sendet nur die copies of the Source Ports. Das ist eine der SRWs Beschrankung banknotes.
-
Hi, I have problems with the Linksys WAP200. When you use WPA/WPA2 Enterprise client hangs for about 60 seconds to try and obtain an IP address after a successful authentication. AccessPoints from other suppliers do not show this behavior.
I did a tcpdump and comapred an accesspoint of another provider in the WAP200 work, and it seems that the WAP200 is reject bids that are sent via unicast DHCP. When the dhcp server sends an offer through broadcast after 65 seconds, it reaches the client and all is well.
This is clearly buggy since the access point seems to be filtering the DHCP responses, is there an option to solve this problem?
WPA is a known issue with the WAP54G as well. He breaks the wireless link entirely if you use Repeater/bridge modes. It is possible that Linksys a general isue with WPA in several similar products.
So that it is resolved I feel Linksys just to be notified in writing. This also provides a written question should be wound.
Concerning
Fred
-
Hello
I just got a new Dell R610 and I tried to configure the iDRAC on her card. I have it configured on interfaces of multiple T300 Dell and the ILO on the different models of HP servers successfully. But for some reason, I'm going to have serious problems with it.
I think he got an iDRAC Express card as there is no extra ethernet port on the server, just the standard 4 integrated NETWORK interface the iDRAC BIOS are version 1.70 I understand is the last.
In the screen configuration (Ctrl + E) iDRAC, iDRAC and IPMI over LAN are enabled. Selection of NIC is set to shared so for active LOM, it reports 'No. Active LOM'. VLANs are disabled, iDRAC Express stand them? -Once it works I would like to enable it if possible.
Only NIC1 (eth0) is connected to the switch. I tried configuring it with DHCP, but he never does an address even if the operating system gets a.
To remove the switch / VLAN even tried to connect NIC1 directly on an other server tcpdump and running with iDRAC configured with a static IP (the default value of 192.168.0.120). Did not get a thing of it. I could see the arp requests going out but not responses to iDRAC.
So, how do you get the iDRAC to work?
Thank you.
Today technician Dell replaced our motherboard and this fixed a problem with the DRAC.
New motherboard uses older versions of BIOS and DRAC BIOS main:
principal: was 3.0.0, now for 2.0.11
DRAC: was 1.70.21, now 1.41.13DRAC works now, and, Yes, she has the web interface.
PS unfortunately, but this will not be fixed another issue we have with H200 controller or it's linux driver mpt2sas: https://bugs.launchpad.net/linux/+bug/777441 (ClxAdmin, if you use Linux on that server, what distribution of linux/version you are using?)
-
8024F Port Mirroring not capture all traffic
We have a router plugged into port Te1/0/21, that all our WAN traffic comes in our data center. We have duplication of port configured to mirror Te1/0/22 of this port.
control interface of destination session Te1/0/22 1
control the source session interface 1 Te1/0/21We have a Sourcefire traffic monitoring device and when I do a tcpdump for this interface I see only ARP, STP and the interface of the switch http connections.
We have mirrored on a N3024 that works very well for a different router.
The 8024F is stacked with an another 8024F via ports 4 fibre first. 8 other ports on the 2 switches have fiber connections, then we have 7 fiber for rj45 connectors in each switch connect the CAT5e cable with other devices. 21-24 ports, we use the rj45 ports rather than the fiber on each switch port.
The switch firmware is 4.2.2.3.
Try adding this line to the config and see if it helps.
session mode 1 #monitor console (config)
-
Phone number 5548 LLDP connect
Hi all and thanks for the responses to come.
I have 3 power connect 5548 works very well. All of a sudden 5 ip phones just stopped working. They are not able to connect more. I made no change, no change, so I don't understand why it has stopped working. The local network is fine.
In LLDP neighbors information, I have 35 devices, for most ip phones and only 5 phones not working is not on the same switch number 2.The only difference I see is on the "capabilities" of LLDP-MED
I see that on a phone 'PoE - PD, the inventory of network strategy, capabilities'
and on a phone not connected "LLDP-MED political network capabilities"
Phones are ok because if I turn them to a working phone everything is ok again, so the problem is with the switch of dell.
Perhaps you can help, I can not me to restart it offers...
I have no green ethernet enabled.
the stop order #, # no shutdown didn't work :/
Edit:
is it possible to see more balls as you can do it with tcpdump?Edit:
Finally restarted the defective switch and it works! at least until now
-
GSS stuck "waiting for configuration data.
One of my clients have 2 GSS 4900 running ver 4.1 (1)
I can't get the ESG service works properly in a secondary gssm running. Gssm service looks like it starts but if I check "gss status" och "Show System State" that it is awaiting configuration data
MNT - GSS - 002.nt.se #show - system status
Standby GSS - 4.1 (1) GSSM - Cisco [Mar 12 Nov 16:10:21 UTC 2013]
Recorded in primary GSSM: 10.16.0.15
Component waiting for data routing configuration (wait a minute). [runmode = 3]
START THE SERVER
16:01 Config agent (crdirector)
16:01 Config Server (crm)
16:01 Database
16:01 GUI Server (tomcat)
16:01, Node Manager
16:01 webserver (apache)
Ping works fine between the GSS: are and there is no firewall involved (both are located on the same ip subnet).
I did stop gss and then start gss. Waited for 24 hours, but the situation is the same.
If I'm running tcpdump on the secondary, I see TCP traffic and UDP between the primary and the secondary, although all UDP packets have a warning of incorrect checksum.
I have no idea on how to t-shoot, that. Should I do gss disable, remove this gss of the primary gssm and enable gss again in the secondary?
Notice to lovers?
Hello
There seems to be a communication problem. You can do the following and see if the GSS is going to runmode = 5.
On the standby: gss stop gss disable Then, go into the GUI of the GSSM and delete the standby GSS from the resources tab Then go to standby: gss enable gssm-standby x.x.x.x (IP of primary )
Then in the GUI of primary GSSM, you will again see the standby in the resources tab. Click on it, and check on the activate button, then hit submit. Make sure the standby goes to runmode 5 under "gss status" output.
If this doesn't work then you can try the below:
Go to the GUI of the GSSM and delete the standby GSS from the resources tab. On the standby: gss stop restore-factory-defaults Make sure you have a console connection so you can do the initial config on the Standby GSS (add IP, etc). Once done, enter standby:
gss enable gssm-standby x.x.x.x Then in the GUI of primary GSSM, you will again see the standby in the resources tab.
Click on it, and check on the activate button, then hit submit. Make sure the standby goes to runmode 5.
Kind regards
Kanwal
Maybe you are looking for
-
EliteBook 840 g1: ms excellent
Hi, have had problem with excel filters? I have two Hp elitebook 1 hp 8470p I73720qm 16 g interchangeable 10 64-bit windows. 2 hp 840 g1 I5 4200u 8 g memory 10 64-bit windows. 8470p works fine with excel filters, but 840 g1 cannot for example when I
-
Guarantee of the deadline for Christmas gifts
I just bought a 5530 WANT for Christmas (i.e. it will not be used until after Christmas). Warranty 1 year will begin now or on 25/12/2014?
-
Windows Mail is removal of e-mails
I run vista 64. It came with windows mail v6.0.6. It is deleting emails that I have read the or not. If I read an email, then change records, all of the mail I've read has disappeared. If I quit the program and then the next time I start it all the m
-
Download CARDFILE. EXE running under windows 7/XP compatibility?
Can someone help me get CARDFILE. EXE running under windows 7/XP compatibility?
-
BlackBerry Smartphones Facebook crashed whenever it starts...
Facebook will show the first screen, and then a split second later close with this error message: net.rim.device.api.system.UnsupportedOperationException Anything stupid like restart, pulling on the battery, remove the program, resettlement, etc solv