Tecra 8200 & max memory

Similar Questions

• What memory use Tecra 8200

  Greetings,

  How many memory slots exist? And how much memory can it handle? And what memory it uses?

  Post edited by: topini

  Hello

  I found this page on the Tecra 8200 memory modules:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=5841&ft=m&St=3

  Looks like the Tecra 8200 would support Max 512 MB and you can use the 144-Pin PC133 SODIMM or memory SODIMM 144 pin PC100!

  I hope I could help a bit!

• Tecra 8200 recognizes that a single memory module 128 MB

  Hello

  I have a Tecra 8200 p3 (850 I think) which currently has 2 x 128 MB of RAM.

  Laptop computer records only 128 MB, so I think that one of the is may be defective.

  I understand the maximum memory that will focus on the tecra 8200 is 512 MB, but is it possible in only one memory card, or must it be 2 x 256?

  Thank you

  Ian

  Hello

  You can use the modules of memory 2 x 256 MB SODIMM 144 pin PC133 or SODIMM 144 pin PC100

  Best regards

• Slot 0 of the Tecra 8200 memory does not work

  I installed 2 256 MB (toshiba original) cards, but only is recognized by the bios. When I change the slots (between the 2 cards) the problem is the same. Thus, it seems not to be a defect of memory. What can I do to get the two cards to work (be a motherboard failure or a special setting)?

  I have two mothers in Tecra 8200 with the same problem, it is a defect of material on the card. Only thing to do is to change the motherboard (I got last year a new roundabout 75 US$ in internet auktion) or work on with only 256 MB.

  Post edited by: olli23

• TECRA 8200 does not recognize the second module memory

  Hi, I have a problem with one of the TECRA 8200. The machine only recognizes the first module and not the second 128 M I tried form to upgrade memory up to 256 M. module is compatible because it works without problem with an other TECRA 8200!

  I updated the bios to version 1.6 but there is no way: the PC does not recognize the second module!

  What can I do?

  Hello

  Perhaps is the second memory slot is faulty. Put this add-on in the first slot and check again.

• Tecra 8200 does not start with the new memory module

  Hi, ive just rode this memory to my willingness to .it tecra 8200 not initialize the message comes up / remove the incompatible memory in B / someone knows why?

  Memory for laptop IBM 256 MB PC100 144 pin SDRAM SODIMM

  IBM FRU L 33, 3070, 256 MB PC100, SDRAM SODIMM, no parity, 3.3 volts, 144 pins, 32 MB x 64

  Thanks for the replies biff

  Hello

  Well, I really put t know why this message occurs. It seems that this module must be compatible with your device. Are you sure that the module has no fault?
  Have you tried to use this memory module in Bank?

  Otherwise I found other compatible memory modules.

  PC100 256 MB (PA3069U - 1 M 25)
  PC100 128 MB (PA3005U)
  PC100 64 MB (PA3004U)

  http://www.frontline.co.UK/product_detail.aspx?pid=MEMKNG5662

  Good bye

• Update disk on Tecra 8200

  Hello

  I own a Tecra 8200 with the latest version of the bios 1.6. I want to spend my 10 GB hard drive to a bigger! I searched the whole forum and google to find some information about the maximum size for this laptop, but there is different information. Sometimes the answer is 30 GB max and the other user has 60 GB hard drive installed. I hope someone can help me and give me some information on what hard drive I can buy a use in my tecra 8200! So thanks a lot this time.

  Welcome them

  Reinhard

  Unfortunately, I can just confirm that there is no public document on the possibilities of upgrade. I know with certainty that some laptop computers Tecra 8200 (probablu models) are delivered with discs hard 30 GB. because of that I'm sure you can use the 30 GB HARD drive with no problems.

  If you want more that I recommend to buy compatible HDD 60 and try to use it. If something is wrong you can at any time send HDD to your local dealer. Probably you have 14 days to send the product back if not satisfied.

• Tecra 8200 upgrade?

  Hi it :-)

  I just bought used Tecra 8200 PIII850MHz 20 GB HARD drive, 256 MB of RAM and AI have a question - in theory, if I flashed the latest BIOS, what is the frequency of maximum CPU which can insertend in the laptop (PIII 1 will, work with it, or maybe just 1 GHz 2 GHz?)? What about HDD - will it work with 40 GB (or more) Toshiba HDD? The specs found on the Web from Toshiba site say about 30GB HDD, but I hope that they are a bit outdated ;-)

  Greetings to all
  Michael Kornacki

  Hi MicKor,

  the maximum frequency of the processor is 1.0 Ghz
  and the maximum of 30 GB HARD disk memory

  Good bye

• Tecra 8200 freezes every few minutes with the XP Pro Retail version

  I've updated a Tecra 8200 with a retail version of Windows XP Pro SP2 (256 MB RAM) it was a new installation after reformatting the drive. I think I've loaded all Microsoft Windows updates and drivers from the site Web of Toshiba.
  The laptop freezes for about 30 seconds every few minutes, even when you try to open a session.
  Also when starting for the first time there is a constant repetitive ping of the noise, which I assume is the hanging windows startup sound. Finally, it stops and it can be used for a few minutes.

  Can someone please?

  Hello

  In my opinion, you should buy more RAM. As far as I know, this unit can manage with 512 MB max. You can use PC100 256 MB (PA3069U - 1 M 25). I'm sure the spirit more RAM there are much more likely to make it work.

  I hope that all hardware components are recognized and installed correctly. You can also try to check which processes are active and I advise you to stop. On this way, the processor has more power for other applications.

• Where can I download drivers and manual for Tecra 8200

  Where can I download the drivers and the manual for a TECRA 8200 (PIII 900/128/20 / CD)

  Take a look at this Toshiba European website:
  http://EU.computers.Toshiba-Europe.com

  You will find a support home page that contains links to the drivers and manuals.
  Then you must choose the * ARCHIVES * in download form!
  This unit is an oldie and so all the manuals and drivers have been moved to the archives.

  Good bye

• Tecra 8200 screen goes black when I use the battery

  When I use my laptop Tecra 8200 with (new) battery, light falls down on the screen, making it almost impossible to work with. I use windows XP. I have havn´t found all the settings to adjust it - anyone know what to do?

  Appreciate the help!
  Peter

  Hello

  On the Toshiba driver European page you will find the Toshiba Power Saver for Windows XP this time that it s a 4.05.00 version

  You can find it in the Archive-> Tecra-Tecra 8xxx--> Tecra 8200-> PT820E-> Power Saver >

  Welcome them

• Tecra 8200 - what computer laptop model number should I?

  All top
  Can someone tell me how do I know what model I have? I try to download the drivers for my computer, but am not sure which series / model it is.

  I have the following information on the basis of the machine:

  TOSIBA Tecra 8200
  Model No.: PT820E-05WQT-E
  Serial No.: 61276516 G ST820-0

  It is a Pentium 3 machine, but is - this one: has / M / R / S series? So what model to choose after that please?

  Thank you.

  Your Tecra is simply Tecra 8200 and there is no other model number.
  Download the drivers, you can find on Toshiba page under http://eu.computers.toshiba-europe.com > support & downloads but under product type, you must choose option ARCHIVE.

  You will then find option for Tecra 8200.

  Good luck!

• WiFi on Tecra 8200 after installing XP SP2

  I am running XP service pack 2 on a Tecra 8200.
  The problem is that the wireless card cannot detect any wireless router.
  I use a belkin G wireless router and it works, checked with another pc with a wireless card.

  However the toshiba wireless client shows no wireless network, the router or another computer.

  I have the antenna turn on and how to configure a wireless connection.

  I tried the old drivers and tried a number of drivers out of this site and others.

  But I had still not everything yet, does anyone else have this problem or a solution to this problem

  Hello

  If you use a client for a WLAN connection WLAN Windows settings SHOULD be disabled. Please check under properties network connection Wireless wireless networks tab.

  There is an option called use Windows to configure my wireless network. This option SHOULD be disabled (without hook).

  Good bye

• Tecra 8200 Boot and install os!

  I have a tecra 8200, cd player no longer works, so I bought a new... The floppy driver has also been broken, but I just bought a new floppy driver external usb. Everything works fine on windows, but I want to reinstall my OS, but I can't boot from the external floppy drive or a cd player... How can I solve this problem? I edited my bios to boot from the floppy drive, cdrom and HDD, but it does not start, the cd is bootable etc... How can I solve this?

  Hey,.

  When you have changed the former in an ew reader, what was the same model or a better? As SD-R2002 or
  DVD PA3014E-1DVD player Kit
  PA3015U-1CDD 24 x CD-ROM Drive Kit II
  PA3068U - 1 CD 1 CD-R/RW Drive Kit
  PA3073E - 1 CD 2 CD-RW/DVD-ROM Drive Kit

  These disk are supported by the Tecra 8200 series. Another Selcet Bay drive can also adapt!

  It can also help to do a BIOS update unless the old one was not installed!

  Goodbye, TOK

• Cursor randomly freezes and jumps to life on Tecra 8200 with Win XP

  Tecra 8200 with Win XP Professional

  The cursor randomly freezes and jumps to life after a few seconds, very rarely, I have to re - start.
  This happens as well with the mouse of keyboard or mouse remotely.

  Hope someone can help because it's driving crazy me.

  See you soon
  Matt

  I agree with Akuma. Disable the internal mouse and external use only. I have old Tecra M1 with the same keyboard and in my case the problem was faulty Acupoint placed on the keyboard.

  With the new keyboard, everything was OK again.
  I recommend you to disable the mouse of the computer laptop and external use only.