What memory use Tecra 8200

Similar Questions

• What memory uses the Satellite A50 112

  My wife has 'lost' the paperwork on this model and need to know the specifications, can anyone help?

  I think that should help you:

  Have a look here:
  [Memory for Toshiba Satellite A50 112 | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=26424&ft=m&st=3]

  You must use the 200-pin PC2700 (333 Mhz) DDR SODIMM

• Tecra 8200 upgrade?

  Hi it :-)

  I just bought used Tecra 8200 PIII850MHz 20 GB HARD drive, 256 MB of RAM and AI have a question - in theory, if I flashed the latest BIOS, what is the frequency of maximum CPU which can insertend in the laptop (PIII 1 will, work with it, or maybe just 1 GHz 2 GHz?)? What about HDD - will it work with 40 GB (or more) Toshiba HDD? The specs found on the Web from Toshiba site say about 30GB HDD, but I hope that they are a bit outdated ;-)

  Greetings to all
  Michael Kornacki

  Hi MicKor,

  the maximum frequency of the processor is 1.0 Ghz
  and the maximum of 30 GB HARD disk memory

  Good bye

• Tecra 8200 screen goes black when I use the battery

  When I use my laptop Tecra 8200 with (new) battery, light falls down on the screen, making it almost impossible to work with. I use windows XP. I have havn´t found all the settings to adjust it - anyone know what to do?

  Appreciate the help!
  Peter

  Hello

  On the Toshiba driver European page you will find the Toshiba Power Saver for Windows XP this time that it s a 4.05.00 version

  You can find it in the Archive-> Tecra-Tecra 8xxx--> Tecra 8200-> PT820E-> Power Saver >

  Welcome them

• Tecra 8200 recognizes that a single memory module 128 MB

  Hello

  I have a Tecra 8200 p3 (850 I think) which currently has 2 x 128 MB of RAM.

  Laptop computer records only 128 MB, so I think that one of the is may be defective.

  I understand the maximum memory that will focus on the tecra 8200 is 512 MB, but is it possible in only one memory card, or must it be 2 x 256?

  Thank you

  Ian

  Hello

  You can use the modules of memory 2 x 256 MB SODIMM 144 pin PC133 or SODIMM 144 pin PC100

  Best regards

• Slot 0 of the Tecra 8200 memory does not work

  I installed 2 256 MB (toshiba original) cards, but only is recognized by the bios. When I change the slots (between the 2 cards) the problem is the same. Thus, it seems not to be a defect of memory. What can I do to get the two cards to work (be a motherboard failure or a special setting)?

  I have two mothers in Tecra 8200 with the same problem, it is a defect of material on the card. Only thing to do is to change the motherboard (I got last year a new roundabout 75 US$ in internet auktion) or work on with only 256 MB.

  Post edited by: olli23

• TECRA 8200 does not recognize the second module memory

  Hi, I have a problem with one of the TECRA 8200. The machine only recognizes the first module and not the second 128 M I tried form to upgrade memory up to 256 M. module is compatible because it works without problem with an other TECRA 8200!

  I updated the bios to version 1.6 but there is no way: the PC does not recognize the second module!

  What can I do?

  Hello

  Perhaps is the second memory slot is faulty. Put this add-on in the first slot and check again.

• Tecra 8200 does not start with the new memory module

  Hi, ive just rode this memory to my willingness to .it tecra 8200 not initialize the message comes up / remove the incompatible memory in B / someone knows why?

  Memory for laptop IBM 256 MB PC100 144 pin SDRAM SODIMM

  IBM FRU L 33, 3070, 256 MB PC100, SDRAM SODIMM, no parity, 3.3 volts, 144 pins, 32 MB x 64

  Thanks for the replies biff

  Hello

  Well, I really put t know why this message occurs. It seems that this module must be compatible with your device. Are you sure that the module has no fault?
  Have you tried to use this memory module in Bank?

  Otherwise I found other compatible memory modules.

  PC100 256 MB (PA3069U - 1 M 25)
  PC100 128 MB (PA3005U)
  PC100 64 MB (PA3004U)

  http://www.frontline.co.UK/product_detail.aspx?pid=MEMKNG5662

  Good bye

• Tecra 8200 - what computer laptop model number should I?

  All top
  Can someone tell me how do I know what model I have? I try to download the drivers for my computer, but am not sure which series / model it is.

  I have the following information on the basis of the machine:

  TOSIBA Tecra 8200
  Model No.: PT820E-05WQT-E
  Serial No.: 61276516 G ST820-0

  It is a Pentium 3 machine, but is - this one: has / M / R / S series? So what model to choose after that please?

  Thank you.

  Your Tecra is simply Tecra 8200 and there is no other model number.
  Download the drivers, you can find on Toshiba page under http://eu.computers.toshiba-europe.com > support & downloads but under product type, you must choose option ARCHIVE.

  You will then find option for Tecra 8200.

  Good luck!

• Can I update my BIOS using a stick USB Mem on Tecra 8200

  I want to update BIOS for the last level v1.6.
  I don't have a floppy drive selectabay, just a DVD player.
  Now, it would take 3 DVD to do this I assume IE duty in the order of the day for more BIOS later.,.
  v1.4 then 1.5V and finally v1.6.

  Is the Board of Directors supported the start-up of a stick USB Mem, or a USB FDD.
  Any thoughts on the best way to do it.

  Is there a utility I could download and do it from windows...

  My system is a 820E. Tecra 8200 series.

  Thank you.

  I doubt that you can not do this.

  Toshiba page offers a trad BIOS update that can be updated by using only the FDD drive.

  Please check this update of the BIOS Toshiba how to document:
  [How update the BIOS on my Toshiba laptop and where can I get the latest version of the BIOS for my machine? | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS & FID = TRO0000000b07]

  Concerning

• Tecra 8200: flicker of brightness of the screen on the use of the battery

  I have a Tecra 8200 running Windows 2000 Pro. The problem is with the brightness of the screen flashes intermittently, all a few minutes when it's on battery. The Toshiba power saver utility seems to work OK. his answer seems to depend on remaining battery life, that is to say less than 50% there is no difference between 'normal' and 'long life' with regard to the brightness of the screen.
  Superior to 50% there is no difference between 'normal' and 'high power '. There is no problem at all when running on the current.

  Recently, I changed the battery; the original was a PA3062U-1 bar, but the news is a PA3062U-1BAT. Can that be a problem?

  Hello

  The new battery is the right specification for this model of computer Tecra laptop and on I think that the battery cannot be responsible for this.

  If you try what Tom suggested it please let us know about the results.

• 4070cdt satellite: what memory is using?

  What memory the 4070cdt satellite uses it please, I'm only a novice to this

  Hello

  As far as I know this unit uses SDRAM and this modules memory are compatible:
  PA2060U 32 MB
  PA2061U 64 MB
  PA2062U 128 MB

  Good bye

• Tecra 8200: If I use the moniter decrease brightness battery power

  I have a laptop Toshiba tecra 8200, when I use it on battery moniter decrease brightness, I tried to adjust the power to the control panel settings, but there is no option for brightness (win xp)? anyone has idea how to adjust the brightness on battery?

  Hello

  If I remember right you can set the brightness of the display by saving settings. Please start Toshiba Power saver. Check the part runs on batteries. There must be some NORMAL called marker profile. Click details, and then click standby power mode tab.

  There monitor the brightness option. All the four options set at the maximum level. Now when you use your laptop on battery power the brightness of the monitor will be defined to the maximum level.

  Please test.

• Tecra 8200 & max memory

  Is memory max for the Tecra 8200 still limited to 512 or y at - there a way around this problem?

  If more memory can be inserted, is there a part number specific to the widget for example 2 x 512 MB 512 MB
  Thank you
  Kanger

  Hello

  Your information is correct. Tecra 8200 can manage with 512 MB RAM max. You can put more RAM, but I guess that it will not be recognized by the BIOS.

  By the way: the memory modules are compatible RAM for your device
  PC100 256 MB (PA3069U - 1 M 25)
  PC100 128 MB (PA3005U)
  PC100 64 MB (PA3004U)

  Good bye

• memory used or what is available?

  I plan to replace my PC due to old age and slow running.  How to see what is the memory used, or what is available?

  There explore a little more deeply, but you can see how to check the amount of memory is available and learn more about how help, here: fix easily a slow slow PC