Tecra R840-16J - Driver 8 3 Windows

Similar Questions

• Tecra R840-16J - Win 7 installation - how?

  Hello

  I want to make a new one. Clean instal win7 Pro in my Tecra R840-16J (a BSOD appeared only 6 months after I bought it!). I'll install an SSD too!

  Could someone tell me how to do? (I mean, which drives should I have to install hel?) I downloaded al 48 discs and Aps for my model when using win7 64 bit.

  Kind regards
  Paulo

  Hello

  Install the drivers in the following order:

  Windows 7 64 bit

  Driver USB-Serial V1.3.0
  PlayReady PC Runtime 1.3
  Infineon TPM professional package 3.60.2071.00
  SW 9.2.0.1015 Chipset installation utility
  Intel Management Engine Interface 7.00.02.1164
  Intel AMT 7.00.02.1164 software
  8.801.2.1 - 101225 a-111146C-Toshiba AMD display driver
  Intelligent management of the TOSHIBA v1.0.2.0M screen
  Driver Intel Rapid Storage Technology 10.1.0.1008
  Realtek Audio Driver 6.0.1.6271
  Intel LAN driver 15,7
  USB3.0 Driver 2.0.32.0rior
  ALPS Pointing Device Driver v7.x6.303.106_A
  Synaptics Touch Pad Driver 15.2.4.4
  Driver O2Micro 1.1.4.207G smart card reader
  TOSHIBA value added package 1.4.1
  Ricoh 2.11.17.02 card reader
  Intel Wireless LAN Driver 14.0.0.113.0.s64
  Intel Proset 14.0.1.0.0.s64 & 13. 3.0.0.1.s64
  ConfigFree 8.0.35
  TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 13
  TOSHIBA Fingerprint Utility V1.0.2.36
  TOSHIBA Web Camera Application V1.1.2.13
  3.1.3 TOSHIBA face recognition
  Utility of rotating 180 degrees TOSHIBA v1.4.0.0
  TOSHIBA eco Utility 1.2.21.64
  TOSHIBA HDD/SSD Alert 3.1.64.6
  TOSHIBA HDD Protection 2.2.0.12
  TOSHIBA Service Station 2.1.45
  TOSHIBA PC Health Monitor 1.7.3.64
  TOSHIBA Sleep utility 1.4.1.7F
  TOSHIBA V4.00.4.12 VCR - HAS
  Intel Wireless Display 2.0.27
  TOSHIBA v2.0.4 synchronization utility
  TOSHIBA Media Controller 1.0.85.4
  TOSHIBA Media Controller plugin 1.0.5.13
  PatchFiles

• Tecra R840-16J - FN keys no function

  Hello

  I have a problem with my Tecra R840-16J. Sometimes, I use the FN keys (the most I use is F6 and F7 for brightness) sometimes I can't! They are disabled singles! And if I press on the window of "windows Mobility Center" ECO button will be displayed and the brightness will be there if the F6/F7 keys are still active and will not be there if the keys are not active more!

  This laptop is driving me crazy! I have Toshiba laptops from the end of 1997 (Ant) working again... with win98 a MX30 which is perfect despite almost 8 years of use intensive Ant sub zero temperatures (I do astrophotography...) but this one which I thought it would be a professional is a great diapointment... !

  Thanks for any help,
  Paulo

  Hello Paulo

  I put t really know what the problem is here and why do you have this problem, but without cleaning preinstalled OS (factory settings) something like that shouldn't happen.

  What you can try is to remove preinstalled Toshiba value added package, restart the system and install the latest version of the Toshiba download page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

  Please post comments.

• Upgrade SSD for a Tecra R840-16J

  Hello world

  This is my first post here!
  I am Portuguese and I bought a R840-16J two months ago. I chose this model because it had all the specs I wanted (I run Toshiba laptops since 1997... and my first still works!) except one: he had not an SSD. Given that I could not custom make my laptop that I bought it with a 500 GB HDD at 7200 RPM,.
  The upgrade only I could do (and I did) was to install an extra 4 GB RAM module.

  I would like to install an SSD now (with the same capacity,...).

  My questions:

  1. don't recommend me a special brand/model?
  2 - What are the steps that I need to have a correct installation?
  3. I installed a lot of sw that I need (office, PS and many astronomy specific sw I use). Do I have to re - install all these or is it a solution to 'clone' my HARD drive SSD?

  Any advice will be greatly appreciated :-).

  Kind regards
  Paulo

  > 1-do you recommend me a special brand/model?

  I would not recommend a specific model or manufacturer, I think that it s always a question of value for money. I recommend you get some reading and assessment tests some SSD drive test on tech Web sites.
  You can choose the best SSD drive for you I mean it didn't need to be the best and expensive

  > 2 - what steps I have to do a correct installation?

  It is the same procedure as the HARD drive upgrade.
  Check this nice HowTo from Toshiba:
  Tecra R840 & Satellite R840 HARD drive replacement procedure
  http://APS2.toshiba-tro.de/KB0/CRU19037K0000R01.htm

  > 3 - I installed a lot of sw that I need (office, PS and many astronomy specific sw I use). Do I have to re - install all these or is it a solution to 'clone' my HARD drive SSD?

  You can install everything again on new SSD drive or you will create an image:
  You can use an option included in Windows 7:
  Click Start at the start and then select back up your files.
  Then click on create a system image hyperlink.
  Now you can choose where you want to save the image. You can choose an external HARD disk, burn it on several DVD s, or store it on a network location.
  When you want to restore the image, you will be able to use the System Recovery Options to recover the system. For a recovery of the system option, you must start the Win 7 F8 press should choose fix my computer. You will find in this window option called: system image recovery

• Re: Max RAM in Tecra R840-16J

  Hello

  just a silly question: what is the maximum RAM I can install in a R840-16J.
  I now have 2 x 4 GB but I wish I could have more...

  Thank you
  Paulo

  You can't have more. Maximum is 8 GB.
  You can use 2 x PA3918U-1M4G.

• Tecra R840 - 16J SATA III is capable of?

  Hello

  Just to ask questions about SATA compatibility! My R840-16J SATA III is capable of?

  Thank you
  Paulo

  Hello

  SATA-III was introduced in Sandy Bridge chipset (Intel with the 2nd generation 6 series I have Core CPU).
  The laptop seems to be equipped with the Mobile Chipset Intel QM67.
  These chipset supports SATA 6 Gbit/s for 2 Ports and 3 Gbps to 4 Ports.

  But the SATA controller is also compatible to the bottom so that you could use disk SATA III SSD or HDD in SATA II controller too.

• Tecra A2 - Display driver compatible with Windows 7?

  Hi all
  I've recently updated my Tecra A2 to Windows 7 (obviously without checking compatibility). It is working very well, but I can't find a driver (if it exists) for my graphics card. I've exhausted all over support of Toshiba and the forums pages, and I feel like the only solution is to buy a new card.

  Can anyone help?

  See you soon

  Hello

  I m asking you to install Windows 7 on older Tecra A2. Are not satisfied with the operating system preinstalled?

  Normally, you can get all the drivers on the Toshiba page. I checked and I can't find a driver for Windows 7 or Vista (most Vista drivers are also work on Windows 7). What can you do now? That's strange but as I know the Tecra A2 is equipped with an Intel card and you should check the Intel website for a pilot. Normally it should good one.
  Check it!

• Tecra R840-16J - reboot with the fan at full power and no activity

  Hello

  Everyone has found this behavior too?

  After reboot (this happened a few times... with the drive hard and today with the ssd if it's not their fault) the windows or toshiba screen is displayed only a black screen, no disk activity, and the fan works like crazy! I have it stop after 1-2 minutes because nothing is happening!

  See you soon,.
  Paulo

  In my opinion, this can happen without any reason.
  Have you done all that can be responsible for this? Update the BIOS maybe?

• Tecra R840 - need driver for the button control / stop Touchpad

  Which driver supports the switch for the touchpad?

  Hello

  If you ask a software / driver, then you should also publish information on your installed system.
  I assume that you have already installed the touchpad driver, in order to use the function keys, you need to install the VAP (value added package) as published by Liam

• Tecra R840 - which partitions can I delete?

  Hello

  I installed a Plextor M5P 512 GB ssd in my Tecra R840-16J! I'm very happy with it :-)
  Restore laptop to factory state using the recovery DVDs I created before! Now, I have 2 copies and a 16 GB USBFlash with an extra copy! So I can restore to factory State whenever I want!

  But I would like to delete the allocated partitions to this!
  In my SSD, I have 3 partitions made after recovery (please to image): http://imageshack.us/a/img827/4873/34012663.jpg

  Who then can I remove?

  Thank you very much
  Paulo

  First (1.4 GB) partition is created automatically by Windows 7 and there are some files used by Win 7 in case you need fix the system or set system time back at the beginning.
  The second partition C is common system partition containing the Win 7 OS.
  The last partition is the recovery partition that contains the files to recover.
  Recovery files are required to create a recovery disk. In addition the recovery partition allows to recover the laptop without the use of the recovery disk (HARD disk recovery option)

  I do not recommend to remove or change any partition UNTIL you not create the recovery disk.
  Create the recovery disk and then you could change the partitions of HARD drive theoretically you can delete the last partition of HARD drive recovery if you have already created the recovery disc.

• Tecra R840 - need help for installing the SSD

  Hello

  Sorry, again, but I really need help with that?
  My new ssd (arriving in a few days) is a Plextor M5P which is 7 mm thick! My Tecra R840-16J have a thickness 9.5 mm HDD and what I've seen is no caddy!
  I would be grateful all the tricks for installing the ssd drive in my Tecra!

  Thanks for your time,

  Paulo

  Hello Paulo

  As far as I know that some models are available with drive HARD and some with SSD these models with SSD have small SSD support. SSD is fixed by 4 screws in this medium.

  I put t really know how to help you now. Maybe you should contact the nearest Toshiba service provider and ask for help. I think they can check the part number of this door - or maybe order one for you.

• Tecra R840 - energy SSD after closing

  Hello

  Could someone tell me what than a ssd power consumption when the computer is turned off?

  I have a laptop Toshiba Tecra R840-16J (bougth 6 months ago) with a sweet Plextor M5Pro 512 GB ssd intalled. Yestarday, after a charge of 100%, I liquidated the laptop and today (after 4 pm) I turn it on! The battery was at 93%. Is this normal? What could be the cause of this decline of 7%?
  I use a bluetooth mouse but I thing that when I stop the laptop everything must be switched off!

  Kind regards
  Paulo

  Hello

  Some options such as wake on LAN or wake on keyboard drain on the battery even if the laptop is turned OFF.
  To avoid this, you need to turn off these options in the BIOS.

  Note: Don't forget save changes when settings have been changed.

• Tecra R840-A222 - Windows XP Drivers needed

  Hello everyone, I am currently planning to purchase the Tecra R840 - A222 (PT42KV) here in Saudi Arabia and I need to know if this model has Windows XP drivers for it. On the driver download page, I can see two short-model for this R840-A222 numbers. They are PT42KV and PT42KE.

  The PT42KV has only about five drivers XP while the PT42KE has virtually all the drivers for Windows XP.
  Is someone can you please tell me if for the PT42KE XP drivers will also apply to the PT42KV?

  I am especially concerned by the base which consists of the chipset graphic, audio, ethernet drivers, and others for material of this model. I use this camera mainly for engineering software (PLC programming, diagnosis of the vehicle and other who need the XP platform).

  > On the driver download page, I can see two short-model for this R840-A222 numbers. They are PT42KV and PT42KE.

  As far as I know XP for Tecra R840 PT42KE drivers should work on Tecra R840 PT42KV too.

• Tecra R840 - Ethernet and driver sound Dynadock question

  Hey,.

  Tecra R840, model PT429A-007004, does not work with the Toshiba dyna docking station.

  Specifically, the Ethernet and the audio driver for the dock dyna is not installed after running or installing the driver on the cd of the dock dyna or the latest driver on the site.

  Does anyone know a fix for this?

  Note: nothing in Device Manager to say that these pilots to dock a missing, only when you install the driver mentioned the wizard that Ethernet and audio drivers might not be installed.

  He also mentions that the dynadock has a problem with the graphics card edge, but we have not had problems with graphics, for example screens.

  > where to install the driver only mention Assistant that Ethernet and audio drivers might not be installed.

  _Regarding the driver LAN and Audio missing. _
  This theme has been discussed already in this thread
  http://forums.computers.Toshiba-euro...ThreadId=70771

  _The possible solution: _
  Navigate to the folder * C:\Program Files\DisplayLink Core Software *
  And here you should find the drivers for the network and its

• USB drive not recognized on Tecra R840

  My Tecra R840 will not only recognize the USB memory sticks. USB works fine with discs hard USB and wireless USB mouse. Help! Any ideas? Thank you very much

  Have you tested with different USB keys t and connected to different USB ports?