Tecra S1 series don't start

Similar Questions

• BOOT Menu access Tecra R Series

  How the hell you access the BOOT Menu on the Tecra R Series?

  And why it is not documented in the instructions (Toshiba)?

  Thank you

  Hello

  Menu start AFAIK is accessible only if you press F12 at startup.
  Choose the boot device using the up and down arrows and confirm with the button ENTER.

  Check it out.

• Tecra M4-S435 does not start

  My Tecra M4-S435 will not start.
  When I turn it on, all I hear is a quick check of the DVD player, a hum of hard drive and fan.
  I don't see anything on the screen at any time. I tried an external monitor and still see nothing.

  Is this a failure of hard drive, the screen failure or something else?

  > That could tell if pulling the battery for 30 minutes he gets to start? (I have not tried with my original Tecra, but I will soon... I just have to put a hard drive in it first...)

  I m not very well, but I guess that the BIOS would be defined default value that could help solve this problem.
  I had this similar problem with my Toshiba laptop not and the same workaround helped also

• Tecra A8 DVD don't read/write DVD-R 1-16 x.

  Using Sonic Record DLA, Tecra A8 DVD don't read/write DVD-R 1-16 x. Ok work on DVD - R 1-8 x and CD DVD - R 1-16 x has tested successfully on the two recent Toshiba Satellite Pro and HP Office. Have updated the Bios, software DVD-RAM and Sonic DLA.

  Hey,.

  What exactly do you mean? This means that you can t burn DVD-r with 16 x speed?
  In this case, you should check the specifications of your CD/DVD drive. Not all models support this speed of combustion. In addition, I recommend using 8 x only, he speed will give you a better quality of the burned data/average.

  You must also use different types of media. I believe that your other computers have different drives in order to test different mediums. I have a good experience with Verbatim DVD-R.

• Using recovery Toshiba and Applications / drivers DVD Tecra M2 series

  Hi all, I have a problem to format my laptop Tecra M2. When the installation starts, you will see an error at the Command prompt. the error indicates
  Failed installation aborted/a process!
  A:\ >
  Please help me how to fix it

  Can you please explain what you do exactly?
  Do you use the Toshiba Recovery CD facilities to install the OS?
  Please describe what exactly happens when you start recovery image.

  Applications/drivers CD/DVD, you can use if you have installed the OS using the facilities of Microsoft CD.

• HP Officejet Pro 8600 - Solution Center (or whatever his name with the 8600 series) does not start

  Dear all,

  Very frustrated with HP. I just bought a new HP Officejet Pro 8600.

  I install the software from the CD. It installs without problem

  I try to click on the icon 'HP Officejet pro 8600' and the solution Center (or whatever his name for this printer) applicatoin don't start/load - I see he's trying to do something for the first time, but no user interface is displayed.

  I have uninstall all HP software.

  I download all of the HPs site with HP printer software install wizard for windows - this is a utility that allows you to draw trouble and detecting good software of the printer.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&JumpID=ex_r4155/HHO/IPG/ccdoc/p...

  The software is properly detected and it installs without problem after download of HP

  Then, I click on the "HP Officejet pro 8600' in the office, the application software not load/boot. Yet once, it looks like somethings wants to start, but isn't that the UI never appears on the desktop

  I have unintall HP products

  I have uninstall Adobe flash 11

  I redo the steps of Installation Wizard printer and the same happesn (i.e. after a clean installation of the Solution Center for HP Officejet Pro 8600, I can't start the application)

  It's really frustrating.

  I use windows 7 64-bit.

  Can someone please help.

  Thank you

  printerPK.

  Hello everyone. I understand that you have to open the Printer Wizard. To troubleshoot the defective Printer Wizard, follow the steps described in this document from HP: http://support.hp.com/us-en/document/c03640384

  Note: The title of the document concludes that the program opens with a Script error. However, the troubleshooting steps are exactly the same. Essentially, the software needed to start the program was not installed successfully, or blocked.

  Please let know me when you are done troubleshooting. I'm only here to help!

  Mario

• My sew creative adobe keeps telling me to renew my subscription but I did not renew until dec 7 2015 because of this that I don't start in photoshop or illustrator

  My sew creative adobe keeps telling me to renew my subscription but I did not renew until dec 7 2015 because of this that I don't start in photoshop or illustrator

  When you say that you need to renew, I'm not quite sure what is the message you get. If the suggestions below do not cover, please indicate the specific message you see.

  If you are prompted for a serial number in the creative clouds,

  See this link:https://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html

  If you open an application that belongs to your creative cloud membership and you see a message indicating that you are running a trial, please see this link: why the app launched in Trial mode?

  Guinot

• Lightroom CC Don t start... What can I do?

  I ve installed the app from cc in lightroom. It is displayed correctly in my cloud. I start it and the start screen is displayed for one second. Then, it will be lost and start the app Don t. I start the cloud... I sign out and sign in a few times... but he Don t start. I use an iMac with 10.9.5 in 64bit_mode... What can I do? Help, please...

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '.

  / Library

  (3) then navigate to Application Support > Adobe.

  (Note: If you have an older version Apps like 5 CS, CS 4, make sure that you have the serial number to activate again before next steps below)

  Under Adobe folder locate the folder named SLCache , open it and trash the contents of it.

  Under the same folder Adobe, navigate to the SLStore folder and rename it to old SLStore.

  Then try to launch LR CC 2015 in list of Apps in the cloud creative desktop application.

• Hi all, I was able to make the payments on CC for photoshop lightroom but never received any series don't or by e-mail.

  Hi all, I was able to make the payments on CC for photoshop lightroom but never received any series don't or by e-mail. He went to the page order and checkout then error msg please help.

  This isn't really a problem, it can present as test on site due to several reasons. If you haven't signed up with correct email address. You can also try to sign out and sign back.

  I suggest you ignore since it is the trial of posting on the Web site.

  Did you install desktop CC and CC Photoshop creative cloud desktop?

• Why the installation don't start after the message "installation wants to make changes?

  Why the installation don't start after the message "installation wants to make changes.  Type your password for this? »

  Hello

  He wants the password to your system administrator. Standard procedure on Mac for non-admin users

  Thank you

• Tecra 9100 don't start - power suplly LED flashes

  Hi all.

  I have a problem with a laptop Tecra 9100. When I push the button start the suplly power LED flashes orange for eight times to make a quick stop in flash 2 and flash 8. Can someone explain to me this error code is this?

  Thank you for all your answers

  Hello

  If electronic power supply detects that some portable problem send a blink code. This code allows you to identify the problem. I can't tell you much these codes, but what I know for sure, is that you need professional help.

  Please contact the service allowed in your country and explain the problem that you have.

• Windows will not start using fingerprints on Tecra M-series

  When you start windows the fingerprint sensor to recognize and accept my fingerprints, but used to start Windows.

  When you start windows with password, appear on the display with text like "can't find the backup file.

  Try to remove the existing footprint and add a new one, can be done in after recognizing my fingerprint.
  Request password, it does not accept the password because off backup file missing?

  Hello

  It seems that the fingerprint software is unable to find the file where the password was stored why? Who knows?  :|

  The point is that this issue could be related to corrupt or missing files, fingerprints and in most cases reinstalling new software of fingerprints should solve this problem.

  Visit the European of Toshiba driver page, downloaded the new fingerprint software, remove the old applications installed, reboot the laptop and install the new download fingerprint program.

  I think this should help

  Welcome them

• Tecra A11 - 11N does not start after upgrading CPU

  Hello

  I would like to do an upgrade of the processor for my Tecra A11 i5 - 430 M 11N to a probably much faster i5 processor. I thought that the i5 - 580 M'd, but the laptop does not start when I installed this processor.

  I started the 430M, done some research on the internet and discovered that the 580 M has a very high FSB speed, and that is what probably does not work / not compatible with my machine.

  http://Ark.Intel.com/products/43537/
  http://Ark.Intel.com/products/49653
  http://Ark.Intel.com/products/49652

  and also http://ark.intel.com/

  Now, I went back to the computer store, returned the 580M and got an i5 - 560 M compared to its specifications as I've seen it would not compatible because it has the same speed of the FSB with the 430 M.

  I then later in the day tried to install this cpu as an upgrade, BUT alas!
  It STILL does not START ALSO.
  I was dumfounded left. The processors in the same line of the family are supposed to be compatible between them provided: lithography, FSB and socket type are similar.

  Or what I'm missing here?
  I did upgrades of CPU in many cases for desktop computers and laptops, and this is the first that has left me with no word to say!

  Please offer assistance or advice.

  Simon

  + The message has been modified.

  Hello

  Recommend to check this doc from Toshiba:

  + Can I put th CPU, screen, or motherboard in my Toshiba laptop? +
  http://APS2.toshiba-tro.de/KB0/FAQ35006D000RR01.htm

  Upgrading the CPU is not supported (officially).
  The point is that, even if the chipset would support the new processor, it would be possible that the laptop wouldn't start because of compatibility problems between the BIOS or other components on the motherboard and the new processor.

• Tecra A3x hangs at "Setup starts windows" during the XP installation

  Hi again
  I posted another thread on this laptop. This question was cured by adjusting the correct CPU.

  So, now everything seems fine. Everything seems to work except very well.
  During the installation of XP, the drivers all will charge them and then we get the text 'Setup starts windows' the lower left of the screen.
  It does not further, just sitting there.

  I googled this problem and read many old threads on the subject, I went to the Microsoft website too.
  So far I tried (on the basis of these old threads)

  Different installation discs
  Different memory
  Disable (in bios) that anything not reqd such as Lan
  Reset the default bios settings
  You press F5 when invited to press F6 for scsi drivers. From there, I tried different setting options.

  The current bios is 1.30, I understand there is a update available for 1.4 but it is a basic installation Win rather than back may be done without THAT installed XP.

  Suggestions for what the problem maybe?

  Hello

  What version of Win XP you try? Win XP contains the SP3?
  Please include to the Win XP SP3 using a tool called nLite and then try to reinstall Win XP.

  AFAIK the Tecra A3x support a common IDE HDD so no driver RAID or SATA is necessary.

  You can also check the HDD of the Tecra.
  Use the tool called Drive Fitness Test to test the HARD drive

  Good luck

• Tecra A9: Windows does not start after you turn off multiprocessor in BIOS

  I use a Toshiba Tecra A9 with a Core 2 duo. I need to change the bios setting to run a special program, "multiprocessor: disable. Now, I've changed back to the bios setting "multiprocessor: activate ' and win xp stop start after login. With "multiprocessors: Disable" the computer starts normally. If I press F8 after starting the computer and select save mode, the computer starts.
  I don't have any idea what I can do to solve this problem.
  Any ideas?
  Thanks in advance.
  Ulli

  Maybe the ACPI-Multi CPU driver was not installed correctly or a MS patch is necessary.
  I read on some similar topic websites.
  It is very important that the XP SP2 has been installed and other patches.

  At this time the new Win XP SP3 is available. I think that this is a beta version, but I already installed it on my XP OS.

  So maybe you should enable the multiprocessor option in the BIOS then you need to install the XP again. Then install all available Ms patches, fixes and eventually the SP3 too.

  Then check again.

  One question; Are you using the newest BIOS?