Tecra S2 instantly died - not in standby or hibernation

Similar Questions

• Tecra M4-S435 does not start

  My Tecra M4-S435 will not start.
  When I turn it on, all I hear is a quick check of the DVD player, a hum of hard drive and fan.
  I don't see anything on the screen at any time. I tried an external monitor and still see nothing.

  Is this a failure of hard drive, the screen failure or something else?

  > That could tell if pulling the battery for 30 minutes he gets to start? (I have not tried with my original Tecra, but I will soon... I just have to put a hard drive in it first...)

  I m not very well, but I guess that the BIOS would be defined default value that could help solve this problem.
  I had this similar problem with my Toshiba laptop not and the same workaround helped also

• Tecra M10 - Sound does not work on Windows XP SP3

  TECRA M10 sound does not work with Win XP SP3

  1. the drivers from the toshiba web site.
  2 chipset drivers and audio drivers were reinstalled no luck,.
  3. no mute FN + Esc
  4. feature eat that all drivers ok

  Hello

  If I understand your right all devices listed correctly in the Device Manager and you don t have yellow exclamation points?

  Normally, for high definition sound cards, you need two patches from Microsoft:
  KB835221 and KB888111.
  Normally, these patches are integrated into SP3 but it works only if you install the audio driver after SP3. So, if you have an older version of XP without SP3, you must update to SP3, all first and then install the display driver.

  So in your case, you must delete the current sound driver and restart the laptop. Then use CCleaner to clean the registry and system files. Reboot the laptop. Then download and install the driver of his newest Realtek Hompage.

  Good bye

• Satellite Pro A200GE-1F9 may not resume from standby or hibernation with SP1

  Hello

  Details of the laptop: [my laptop: http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie = Yes & PRODUCT_ID = 131911]

  I recently used Windows Update to install SP1 vista on my laptop, but since this installation I can't resume from standby or hibernation. (Service pack has successfully installed - according to Windows anyway).

  At the resumption of his sleep, I get a blank screen.

  During the recovery from Hibernation, I receive a STOP error message: + Stop 0x0000008E (0xC0000005, 0x82F11020, 0x9A9D9714, 0x00000000) + caused by * Classpnp.sys*.

  After checking these forums, I have seen that Toshiba does not support SP1 + what is accurate? +

  + * If so when/how we will notify when Toshiba released a "patch" for compatibility Vista SP1? I'm guessing that via personnel TEMPO? *. +

  Before installing SP1, I installed all the updates (from Microsoft and Toshiba) and had no problems; all the drivers are up to date.

  Thanks for any answers in advance.

  I guess that this happens because of a problem of compatibility between some pilots and SP1

  > After checking these forums, I saw that Toshiba does not support SP1 is that correct?
  Yes it's true.

  > If Yes, when and how will notify us when Toshiba released a "patch" for compatibility Vista SP1? I'm guessing that via personnel TEMPO?
  I think that there should be information on the Toshiba driver page, support page or we will receive some information of Toshiba through applications of Tempo.

  We'll see

• Tecra M5-103 does not recognize the 4 GB SD card

  Hi - my Tecra M5-103 does not recognize my 4 GB SD card, could someone tell me if this size chart is supported in this machine please?

  Thanks in advance

  Hello

  I didn't find any official information on SD compatible card sizes for this laptop but I think that card 1 GB and 2GB SD could run without any problem.

  The 4 GB SD card is definitely not supported.

  If you want to use these huge sizes of SD card, you could buy an external drive of All in.
  These devices are not expensive and you can connect and use via the USB interface.

• Satellite A200-14F - standby and hibernation does not work

  Hello
  I bought A200-14th with Windows Vista preinstalled. When I switched to Windows XP, I discovered that the standby and hibernation works. When I try to switch to the standby screen becomes black, but power light gets not "Brown" as it should. It is blue. From time to time, HDD light flashes also.

  I tried to reinstall Windows twice, but it does not work every time. Once, I installed the drivers in some are specific as well as I did the job. But unfortunately I had to reinstall XP once more, and I do not remember that I should install the drivers.

  If you have had the similar problem please write what I have to do.

  Concerning

  Hello

  > When I switched to Windows XP, I discovered that does not work on standby and hibernation.
  After Installing Win XP, you must update the BIOS to the XP version.
  You should check the page European driver of Toshiba. There are BIOS for Win XP.

  After the BIOS update you reinstall Windows XP, the latest status update and install all Toshiba drivers and utilities.

  Welcome them

• BSOD on Satellite A200 - 1 m 8 after the release of the standby or hibernation mode

  Hey...

  I have a laptop: Toshiba Satellite A200 - 1 m 8 OS: Win Xp Sp3

  After taking over my computer in standby or hibernation, I got the blue screen "appeal of dysfunction - parity error - hardware your... provider etc..." »

  I checked my GPU drivers updates and checked the memory RAM models, but all seem ok.
  I also put the count to run with the base of msconfig drivers but wtihout any positive results.

  Any idea what the problem might be?

  ....

  Hello

  As far as I know on the Satellite A200 BIOS should be updated to the version of the BIOS Win XP if Win XP has been installed on the machine.

  Update you the BIOS to the version of Win XP? If this is not the case, this->.

  I searched a bit on the pages of knowledge of MS for some details about this error and found this page:
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; q222973 &

  Microsoft means that this error could be related to the failure of hardware.

  This could be fair and I think that in this case, you must contact the ASP in your country to verify the keyboard and the touchpad.
  Maybe the parts should be replaced.

  See you soon

• Satellite L500 - no wake place standby or hibernation

  Hello

  my laptop does not wake the standby mode or hibernation. you press any button.
  When I press the power button, then it restarts and it comes in the repair of the screen.

  All Microsoft (OS: Windows 7 Home premium) updates are ongoing, as is the BIOS

  Any help?
  Any ideas?
  Else ;-)?

  Greetings

  Post edited by: flying doctor

  Hello

  You are able to boot up the laptop and start the Windows operating system?
  If not, try this;
  Remove the battery, disconnect the adapter.
  You will have to wait awhile, about 2-3 hours.
  Then reconnect the two parts.

  But if you are able to boot up the laptop, but if the standby and hibernation mode still doesn't work, then you should try to reinstall new OS.
  In most cases, these questions are associated BONES.
  For this I recommend to use the HARD drive recovery mode.

• No standby or hibernation option?

  I installed windows XP, among other problems, I noticed that there is no option of standby or hibernation, only, stop, close and restart...

  Y at - it a trick to bring available?

  Thanks in advance,

  Anni

  "Annieyarr" wrote in the new message: * e-mail address is removed from the privacy... *

  I installed windows XP, among other problems, I noticed that there is no option of standby or hibernation, only, stop, close and restart...

  Y at - it a trick to bring available?

  Thanks in advance,

  Anni

  Not all computers have power (standby or Hibernation) management options.  Therefore, the first step is to check if your computer hardware supports the management of the power supply (or ACPI). Check the user manual (if you have one).

  Then, you will need to enter the BIOS Setup menu.  The manual can provide instructions.  If this is not the case, start and press the F10 key - BEFORE loading Windows.  Computers are different, so if F10 does not work, try again using ESC, F12 or F9.

  The BIOS settings are different, then the following options may, or may not be available.
  If the option is available, check the power management settings and make sure that the power plan has been activated.
  If the options are available, select standby mode (S3) and Hibernate (S4)
  Save the changes and exit the BIOS Setup.

  Startup in Windows
  Click Start / run
  Type "cmd" (without the quotes)
  Click OK
  At the command prompt, type ' powercfg /Hibernate on "(without the)
  (quotation marks).  NB.  There is a space between powercfg and / hibernation.
  Press the return key.
  Type "exit".
  Press the return key.

  Open Control Panel
  Click on Power Options
  Select the Hibernate tab
  Activate Hibernate implementation and click OK.

  If these suggestions do not help, you can find more information in the Microsoft Knowledgebase-
  http://support.Microsoft.com/kb/907477

• Windows XP Professional, Media Center Edition 2005 SP3 will not automatically put into hibernation

  I have re-installed drivers quick resume technology drivers & Intel Graphics & Sound & all associated drivers. but not good.

  Computer will be manually Hibernate & come out of hibernation, but is not automatically updated in hibernation?

  I tried the recommendations of microsoft all the but not good?

  The Device Manager shows all devices OK?

  Performed a restore the registry of oem disc & now put into hibernation very well at the moment, I hope that it will last? only lasted for a few days? its now to return again. ?

  not a fan of the system restores, especially under xp, but if it did work at one point, what has changed on your system, since it worked?

  http://support.Microsoft.com/kb/306084

  This is for two versions below, then you should be good.  But again this could be a temporary solution to a problem.

  Microsoft Windows XP Professional

  Microsoft Windows XP Home Edition

• Win 7 Pro (x 86) Log in password is asked upon resuming from standby or hibernation

  It is a fresh install of Win 7 Pro 32 bit.

  I'm the only user, the guest account is disabled.

  To avoid the login screen I ran netplwiz and unchecked the "users must enter username and password...". "followed the instructions to fill out and restarted.

  From the pc from cold start or re-starting (reboot) the PC starts directly in the office (as it should), but the PC comes out of standby or hibernation in the connection screen and I have to enter a password.

  How to eliminate the need to enter a password during the recovery of the standby and Hibernate?

  TIA

  Hachiko

  Why do you have a password at all if you don't plan to use it?

  http://www.howtogeek.com/HOWTO/7771/prevent-Windows-asking-for-a-password-on-wake-up-from-sleepstandby/

  There you go...

• Cursor starts moving across the screen from left to right after the wake up the computer from standby or hibernation

  Original title: cursor goes wild

  My PC to 'wake up' sleep/hibernate, the cursor initially moving across the screen from left to right, in which window is open, destroy all the document is on the screen. I force Windows to close. How to solve this other than turning off standby/hibernation?

  Looks like the cursor of the mouse is very sensitive when the computer comes out of standby or hibernation.
  I suggest that you go in the mouse properties and lower the sensitivity and see if that helps.
  You also need to update any driver mouse if possible.

  Let us know if that helps.

  Marilyn

• Tecra A7 - keyboard and Touchpad do not work after standby or Hibernation

  I have a Tecra A7 to XP. Once time and a some time to wake up from sleep or hibernation, the keyboard and the Touchpad mode do not work. I can always open a session using the recognition of fingerprints. An external USB mouse and then also works.

  I have to close the session and Re-Log-On using the external mouse to the keyboard and the touchpad works again. Very annoying, especially when you are in a hurry... hehe

  Anyone else has a similar problem? All solutions?

  Thanks for any help guys!

  See you soon,.
  OzzieMark

  Have you installed the drivers for your mouse or external keyboard? For example the Logitech drivers?

  Try to uninstall the third-party drivers 3, they may be in conflict with the drivers of Toshiba.

• Tecra A9 - network does not work after wake up from the sleep/hibernation mode

  I have TECRA A9 and it works fine, but I found that when computer portable GB extended standby/sleep mode and after the return to work on the laptop to the network not working not.
  Keep it light, but there is no network and to solve it, I need to restart the laptop.

  Any help please.

  Kind regards.

  This is a known issue so take a look at this site:
  http://APS2.toshiba-tro.de/KB0/TSB8902FC0000R01.htm

  Updated the BIOS, and then it will work.

• Tecra M7: Tablet does not work after closing the lid

  Someone had problems with the Tablet does not work after closing the lid on a Tecra M7? BIOS is 3.20

  Does not happen on hibernate or sleep.
  I have the set cover to do nothing on close.

  Hello

  What do you with Tablet does not work after closing the lid?
  Is - what the laptop freezes or what? What happens exactly?

  Closing the parameters adjustable lid to Hibernate or standby mode or no action.
  These settings can be defined in configuration power saver actions.

  If you have some problems with some Toshiba applications installed, I recommend you to reinstall the program and TOSHIBA common Modules that doesn t work properly!

  Best regards