Tecra S3 external drive usb disconnects on all usb ports

Similar Questions

• Mini Toshiba external driver.usb 2.0

  I bought a mini PC 7 android.
  I also bought a mini external pilot, when I put the USB in the mini PC
  It connects fine to the TI says it is u-disc. It's a (mini Toshiba external driver.usb 2.0)
  I put a few pictures to test, but he says always the same.
  in the settings it says (not available)
  could you please help me
  Thank you

  system: mini PC 7 android
  version 2.2
  kernel version 2.6.32.9 - default
  build number froyo generic - Eng2.2 ver1.5.5 - 20110920.103830

  Hello

  Do you have the same connection error an another USB 2.0 external HARD drive or a USB flash memory stick this laptop?
  Test this
  Maybe this problem of HARD drive.

  USB 2.0 provides a power of 500 my if an external USB HDD or USB device needs more power, a problem may appear.
  In such cases its recommended to connect a USB hub with an external power supply between the laptop and the USB device

• What brand of external drive USB/eSATA can save a Virtual Machine to host Windows 7 operating system?

  People,

  Hello. I use 3 Player VM and Guest OS Windows Server 2003. The host OS is Windows 7. I need to increase the size of the VM disk, so who can install several systems in the guest OS. Before you increase the size of the virtual disk, I need to back up the virtual machine hard disk external. It is to copy and paste the "C:\VirtualMachine\" folder in the hard disk external.

  I just bought an external hard drive that is "Western Digital My Passport Essential 500 GB USB 3.0" and its software is "WD SmartWare". It seems that the software can back up the entire hard drive only. Alternatively, the backup files by selecting the types (music, photo, document, movies). But can not save a folder "C:\VirtualMachine\".

  So my question is: what brand of external drive USB/eSATA can save a Virtual Machine to host Windows 7 operating system?

  These two questions do not apply if you have a virtual machine.

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• External drives, USB, USB Flash Drives, "driver software device is not installed. Problem Acer and Windows 7

  Not sure one I'm more frustrated with.  Acer or Microsoft

  Try to get decent customer service out either seems so difficult.

  OK, it's a pretty common problem.  I've seen this around other forums and each finger to Microsoft points.

  Flash USB, Jump Drives thumb drives, Memory Sticks, players, whatever they are called, they do not work on my Acer laptop.  Everything works still perfectly on my Vista PC and my work XP.  So they are not damaged.  Also an external Freecom USB 1 TB drive.  Does not work on Windows 7.

  I have an Acer 5338 (less than one year) which unfortunately as as a manufacturer OEM for Microsoft Windows are not interested in help to say that there is problem Acer.  ACERS site does not even recognize the existence of the cell phone model I which makes contact them for a solution physically impossible (everyone has a phone number or e-mail address >).  In any case, they had a free upgrade to Win 7.  (Oh you can't imagine how much I care that I didn't...).

  So I've updated.  And all USB memory devices do not work all of a sudden.

  All of them try to load drivers then give up with the error message.

  Just to get the usual answers to the road!

  • I tested the USB ports.  All work.
  • I uninstalled all the USB ports and let the Win 7 to reinstall. No problem
  • I deleted the file that records discs.
  • I made a new clean install.  Nothing has changed.
  • Cannot switch the chipset drivers.  Won't let me, says I don't need them
  • Each drive is displayed during the startup screen.
  • Each drive appears in Device Manager but the poster as a fault.
  • Updated installed, removed, re-installed all the drivers on the planet.
  • Tried the solution of "regedit" suggested elsewhere, temptation of power my laptop, lucky I system restored to the top.
  • Does not appear in disk management, so cannot deal with any drive letter conflict.
  • Have no viruses.
  • Have one firewall installed.
  • Prayed
  • Touched the thing of reversal
  • Pleaded
  • Pretended to cry.  Not interested.

  So, I'm hoping against hope that someone has a solution to this problem.  I have a vague idea that it might be something to do with the "ports" and the port settings.  I'm afraid is a closed book to me, so please, geniuses everywhere, please help!  Give me something new to try!

  Or a way to talk to a human being at Acer!

  Hi davec07510,
   
  We use Windows 7 and have not encountered this problem on computers. This issue is occurring on your computer may be due to the driver or hardware that does not support Windows 7.
   
  The compatible chipset driver installation Windows 7 can help.
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• External drive USB 500 GB PX1394E burp and more

  Since yesterday, my external 500 GB Toshiba USB drive burp more.
  The LED becomes red instead of blue when I turn it on. Needless to say that my entire CD collection is on it, so it is quite a mess.

  What are my options now?

  I bought the external drive in Germany, a little less than a year ago, model Toshiba PX1394E - 3 50.
  Stupidly, I can't find the receipt anymore, so it won't help if I just bring it back to the shop.

  Where Toshiba can I apply for?

  How can I open the case to see if the drive is broken, or just the USB interface?
  The enclosure has two small screws, but by unscrewing seems to have no effect, it seems that they are just to fix a foot plate support.

  Help, please! It is a nighmare!

  Thank you kind
  Ulf

  > How can I open the case to see if the drive is broken, or just the USB interface?
  Don t what a controller can be broken. If something is broken, then this might be just the HARD drive.

  If the HARD drive burp more then the hardware failure is possible and only a replacement can help you. Stupidly that you can't find the verification of sales because it is necessary to get a replacement under warranty

• Deletion of images when the external drive is disconnected.

  I shared my images between the local storage and 2 TB external hard drive.  If I delete a picture when the external drive is not connected it will erase the image next time the reader is turned on?  If this isn't the case, I guess I'll have images that are not in the catalog more on external hard drive if it was not connected when I press DELETE.  Thank you. Ian.

  Hi IanLivesey

  Lightroom keeps a catalogue of your pictures stored somewhere on the network no disc. If you delete an image you can delete in the catalog or the catalog and physically. To remove an image physically physical storage must be fixed.

  If you only remove the images from the catalog, they will remain on your hard drive. You can remove these images subsequently with the tools of the operating system.

  Kind regards

  Daniel (from Switzerland)

• Satellite A200-23Z - HARD drive as external drive USB - how to access all the files?

  Hello!

  After losing the motherboard of my Satellite A200-23Z I need save some important files to hdd satellite. With external USB enclosure, I can only access some... Can't see program files, filesystem - really nothing disk system, a large number of files was on the desk...

  How to get full access to all the hard drive? -to all logical drives?

  Please - help... :(
  Ivars

  I put t understand what is happening here. I have old P200 (similar to yours but with 17 inch screen) and when I connect the HARD drive as external HARD drive to my new P500 I have full access to all stored data.
  There is no limitation at all.

  > was a lot of files on the desktop...
  Do you know how to find the right location for desktop?

• External drive USB disconnects randomly

  Hello

  I use a Mac mini as a server and include two OWC MiniStacks in annex. The Ministacks are connected via USB3 and underneath the Mac mini. The Ministack in the Middle started disconnecting randomly and I have to turn off and on to get it connected.

  The Mac mini is always on and I use the disks USB as server provided the network disks.

  I have Seagate Enterprise drives in the world.

  I get the following output in the Console:

  22/08/16 19:08:19, 000 core [0] USB device 1E91B0B114700000 - reset BOT finished with kIOReturnTimeout.

  22/08/16 19:08:19, 000 core [0] USB device 1E91B0B114700000 - will be reset to zero.

  22/08/16 19:08:20, 000 core [0] 1533181.822274 PRT7@14700000: AppleUSB30XHCIPort::resetAndCreateDevice: could not create the device after tests (1), disabling port

  22/08/16 19:08:21, 000 core [0] USB device 1E91B0B114700000 - fConsecutiveResetCount = 1.

  22/08/16 19:08:21, 000 core [0] disk3s2: device / channel is not attached.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  ...

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  ...

  22/08/16 19:08:22, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:22, 000 core [0] hfs: disassemble initiated on SERVER 2 DATA on the device disk3s2

  22/08/16 19:08:22, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:22, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:22, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:22, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:22, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:22, 000 core [0] jnl: disk3s2: do_jnl_io: strategy err 0 x 6

  22/08/16 19:08:22, 000 core [0] jnl: disk3s2: write_journal_header: error writing to the journal header!

  22/08/16 19:08:22, recorder disc 775 fseventsd [61]: failed to open the output file DATA Volumes/SERVER 2/.fseventsd/00000000088fc0e6 (no such file or directory). Mount point/Volumes/2/.fseventsd database SERVER

  22/08/16 19:08:22, 776 disc fseventsd recorder [61]: failed to open the output file DATA Volumes/SERVER 2/.fseventsd/00000000088fc0e6 (no such file or directory). Mount point/Volumes/2/.fseventsd database SERVER

  22/08/16 19:08:23, 085 deleted [695] normalizeUserMountpoint:791 volRoot failed for SERVER/Volumes of DATA 2

  22/08/16 19:08:23, 085 deleted [695] _validateVolume:813 unable to normalize the volume: ' / SERVER/Volumes of DATA 2 ", flight: (null)

  22/08/16 19:08:26, certadmin 148 [97828] connected to the notification Service

  What is going on?

  HARD drive fault?

  Not pregnant?

  Damn Mac mini?

  I thank very you much in advance!

  He could be sleeping?

  Could it be overheating?

  Have you tried swapping the cables yet?

• Data on external drive USB store

  According to the guide configuration (v4.1, p76), you can create a data store on an external usb drive connected to the host.  I have no problem seen VMs see and use USB host drives, but I don't see the USB on the list of storage adapters, configuring the host tab.  (I made sure that the USB is not assigned to a virtual machine).

  Y at - there a trick to this?

  You cannot use a USB device to store virtual machines - it can only be used as the virtual computer device can attach to and yes I know the documentation is somewhat misleading.

• External drive USB 2.0 on a virtual guest machine

  I use Vmware esx 4.0 server with a couple of the virtual machine is now there is an external hard drive Western Digital USB 2.0 that I want to connect to a client running on the server and use it for backup.

  So what I've done is add a USB controller to my server esx 4.0 for the client running and then connect the drive to my physical server, but is not working tell me what should I do now?

  concerning

  As it is written in other post, in this first version of vSphere virtualization USB is not supported (and it doesn't work in most cases).

  Use an external disk with network connection.

  André

• USB ports all failure Tecra S1

  Hello

  my old Tecra S1 video card died last week and I managed to find an another identical Tecra S1 very cheap.
  I swapped my portable hard drive in the new computer and everything works fine apart from any of the USB ports work.
  Food sent to external drives USB but my computer does not recognize one of the 3 USB ports at all.

  I tried to remove / replace the drivers but no change.
  Also as I had my same old laptop for spare parts I have even replaced the USB turntable (as one of the original USB ports has been damaged) but still no change.

  Could this be something to do with the version of the BIOS on the laptop as surely everything else should be already on my hard drive?
  Maybe my old laptop had an older BIOS which might make a difference?

  any help would be gratefully receieved as I looked the net but don't have anywhere!

  Thank you very much
  Ian

  Hello

  First of all, you aren't sure if the USB port hardware is ok for this second Tecra S1. Right?
  So, theoretically, it might be a hardware and software problem.

  Generally, the USB ports are controlled by the chipset driver.
  You replaced the HARD disk where the operating system is already installed
  I think you should try to install the operating system once more on this second Tecra S1.
  Then you should check the Device Manager if all the USB ports have been recognized correctly.

  If the USB ports would be NOT visible in Device Manager, then I would tend to a hardware problem

• Tecra S2: HDD as unknown device on two of the three USB ports

  Hey again,
  I thought then that I was here anyway I could ask this too.
  The tecra S2 has 3 USB ports, they all work very well for my USB mouse and other small things like the wacom tablet...
  But when I plug my external hard drive in two of them, it says that it is an unknown device...

  I think, but am not sure, that this might have something to do with something once, we had to do in school;
  We had once set up a pilot for a small converted Converter a series (or parallel, cant he recall) cable to the usb port
  (I have already uninstalled the drivers but nothing has changed)

  It's just a guess...

  any idea on how to solve this little problem? : p

  Hello

  You said external USB HDD appears as an unknown device on two of the three USB ports.
  What appears if you connect the HARD drive to the USB port on third?
  It appears as an unknown device or what?

  The device usually appears as an unknown device in device because manager not installed device drivers.
  I check the HARD disk for the drivers and try to install it again.

• Recently, Portege R500 does not recognise external drives

  Vista SP2 - fully implemented to date.
  I have 2 external drives to backup-last used about a month it is a Maxtor and Seagate.
  Now neither are listed in the Solution Explorer, even if the computer is knows they are there because the two happen when I use the icon 'remove '.

  Both drives work in another office of Windows 7, and all ports USB R500 with a USB key and SD card reader. Have you tried the update of drivers.
  Paragon Hard Disk Manager knows they are there as well and lists their properties.

  However, Paragon will not allow them to be used for the backup. Any ideas?

  Hello

  You can try to remove the USB host and USB controllers from Device Manager.
  Restart the unit. USB controllers should be recognized automatically. Then connect one of the hard drives USB ports USB portable s and check if the device would be recognized.

  You can also try to restart the * plug-and-play service.
  You will need to go to computer management (right click on computer and select Manage).
  New window appears, then here you must choose Services.

  Choose * Plug-and-Play * and disable it (if enabled).
  Activate the service once more, and then connect the USB HDD.

• My USB ports do not recognize my external devices

  Hello

  My USB ports are a complete mess. My external drive and my USB is not recognized in one of the ports, my mouse is recognized only in 2 of them, my cam and my mobile are recognized throughout. The external drive, USB key, and mouse already worked in all ports, but stopped working after I sent the PC to the store; Apparently, they did do a very good job.

  Could you help me please? The main problem is that I have everything in my external drive and cannot transmit information of my laptop anywhere.

  Thank you...

  Hi ZukaRashid,

  Thanks for the replies.

  Now let's see if from the information that you have provided the best way to help.

  Since you are on XP, this question would have been better served at the XP forum, but we will work with you from here to find solutions.

  Here are some articles to the Knowledge Base that may apply to your situation:

  • Please do not forget to back up all critical data and create a system restore point before you follow the steps below.

  Troubleshooting articles:

  One or more USB devices may not work when you start your Windows XP-based computer

  USB port may stop working after you remove or insert a USB device

  Peripheral input USB do not work in Mode safe mode or Real Mode

  For your information items:

  Basics on development of device drivers universal serial bus (USB)

  Please follow the troubleshooting steps that are listed in the articles and keep us informed on this issue.

  I'd preferably starting with PORT USB CAN STOP of WORK AFTER YOU REMOVE or INSERT A USB DEVICE.

  Thanks again for the announcement in our discussion group.

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB PORTS NOT EXTERNAL SENSORS

  I have 3 usb ports on my laptop HP Clubhouse.  Have never encountered a problem like this in the past.  I can use my external mouse, USB port will not read a flash drive or an external hard drive.  I checked the Device Manager and there is no error message, and all USB ports are read as working properly.  I installed all the news updates and drivers and still nothing.  I could understand if I was to receive error messages which is however not the case.  Is it possible that all 3 of my USB ports would die at once, and if so, why all this bed as usual.  Help, please!

  Hello

  Yes its very common because they all share the same hardware and software.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the readers and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.