Tecra T9100 recovery disks

Similar Questions

• Tecra M2 - buy a recovery disk?

  Hello

  I have a Toshiba Tecra M2, but without a recovery disk.

  I can buy an old record of recovery for Tecra M2.

  It will be ok for my laptop, or not?

  (each disc recovery linked with his original laptop computer by serial number or something else? or he will be ok for all laptop Tecra M2)

  Thank you

  You can buy each recovery disk which is for the Tecra M2. It is not based on the serial number or something else.

  Each Tecra M2 recovery disk will work.

• Can Tecra M9 - I upgrade the RAM and get a Windows 7 recovery disk?

  Hello!

  I want to know if it is possible to upgrade my Tecra M9 about RAM - memory? I think that I now have 2 GB.
  I also need to know if Toshiba sells a recovery disk to my computer with Windows 7, or do I have to buy a Windows 7 disc and serch for drivers on my own if I want to have the new operating system?
  My language on the portable computer setting is Swedish.

  Cordially Mikael

  Hello!

  I also put t know how much RAM have been mounted, but I checked the Tecra M9 user manual and it can be upgraded to 4 GB of RAM. This means that you need two modules with specification of SO-DIMM DDR2 200pin for upgrade. In the user manual, you can find some information about it.

  On the issue of Windows 7, I think that Toshiba will not release a Windows 7 recovery disc because this model isn't Windows 7 supported:
  http://APS2.toshiba-tro.de/KB0/KBA9A02PX0000R01.htm

  You can install Windows 7 from a Microsoft disc but you will have to collect the drivers on different websites or other, you use the Vista drivers.

  Welcome them

• Tecra A4 cannot read recovery disks

  I am trying to rebuild my Tecra A4 software.
  When I bought it in 2005, I did the recovery discs as recommended by using Sony CDR 700 MB disks.

  Now the CD-DVD do not read them.
  The discs are good, that I've explored them before (a while back), I can Explorer on another computer.

  The Tecra open commercial discs (e.g., printer put in place of the disks, etc.), but does not open the discs that were burned itself (for example, whether previously on the Tecra or another computer). I tired the Sony recovery discs, I tried CD - RW Fuji disks, I tired Memorex, MB 100 CD - R discs.

  None of them will work. Driver is up-to-date.
  I cleaned the lens. Still no luck.
  Any suggestions?

  Otherwise, how can I get a reconstruction of the initial state of the software as new on the system?
  I have an original XP disc that is generic to Microsoft.

  However, I don't want to go this route because I'm pretty sure that Toshiba uses all sorts of drivers that are not available from MS, nor readily available on the net without having to pay someone for them.

  > The Tecra open commercial discs (e.g., printer put in place of the disks, etc.), but does not open the discs that were burned self (for example, whether previously on the Tecra or another computer).

  In this case, to all CD/DVD players, that I had the same problem, because not all readers are compatible with all the disks that are on the market
  I think that is known to you

  However, this problem could be related to a hardware malfunction since the reader of the s laptop has been used 5 years long, it s the s drive laser lens can not calibrate correctly because of the stress of use

  It must be said that you can try to burn the recovery disk using another computer and then you could try to restore the operating system using the burned recovery disk.
  Try a few CD - R TDK or Verbatim
  I use TDK and I convinced m

  Maybe it will work, if not, will need you another CD/DVD drive

• Recovery disk Tecra M2 installs but happens with incomplete installation

  Tecra M2 worked fine, it's a good little machine without running out of space.
  I tried to install a new drive HARD 160 GB (Seagate) was 60 GB (Hitachi).
  I used the recovery on the new HARD drive disk, it formats the drive sets up XP Professional, gets that me recorded by Microsoft OK, but when the laptop wants to run Windows it bombards gives me a blue screen ('dumping' memory etc.).
  When the laptop reboots, in "Safe Mode" message pops up that the 'Installation was incomplete. Re-install Setup.
  First question: -.
  Is it possible to 'fix' the installation with the recovery disk?
  Another disk of Windows XP CD - seems unable to repair the installation.

  Then
  Second question: -.
  I tried to do a complete reinstallation from scratch, with the Windows CD - no problem. But then I need to install the drivers - got the support of Toshiba OK and I see the recovery disc has a whole bunch of the 'fix' but the June 10, 2006 forum thread "necessary driver after installation of Windows on TecraM2, gives the order of installation: no problem except that I cannot locate"Microsoft Windows XP Professional Step by Step Interactive"anywhere - I looked everywhere for it?

  Hi Ollienz,

  I'm a little confused about your Mr. ad you want to install Windows from Toshiba Recovery disk or normal drive of Microsoft? What do you do now?

  Theoretically, the recovery disk might be scratched so that installation can t be completed so successfully in your case, I would like to try a Microsoft Windows XP disk.

  I did a Google search for this Microsoft Windows XP Professional Step by Step Interactive and I found it s an update of safety for interactive training but it doesn t seem to be important for the driver installation:
  http://support.Microsoft.com/kb/898458

• Need recovery disk or recovery for my Tecra A11 image

  I have a Toshiba Tecra A11 and had a problem with the operating system, so a friend offered to fix it for me, when he said fix what it meant try and install completely wrong Windows 7, but at the same time destroy the removal of the partition, all built in Windows 7 pro installation.

  So now I need a file or a CD specific boot to a USB key. Anyone know where I can get one or download one without having to pay 35 quid for a new Toshiba?

  Thank you
  Tom

  Recovery file cannot be downloaded. Toshiba offer as only recovery disk. Download an iso file won't help you much because you will not be able to start the recovery image installation.

  Either you find someone who has the same Tecra and use its disk or you must order one on https://backupmedia.toshiba.eu/landing.aspx

• Re: Blue screen on Tecra R850-1HU install Win XP Recovery disk

  Hello

  I have a Tecra R850-1HU that comes with windows 7 pro

  I stopped the media recovery for win xp

  The installation is correctly with xp and when I reboot, I see the logo win xp for 1 second and then screen (0x0000007B) Blue

  I try safemode... nothing works

  I have load mini windows xp from a cd and I see all the files on the hard disk from the cd of recovery if it s installed

  I try to put the bios sata to ahci or compatible with the same problem

  I try many times with the same problem on a different machine with the same problem

  The laptop is returned to Toshiba (they have installed win xp from an original cd of microsoft, so I need activation, and I have to do this on 20 computers laptops and good course that no, the toshiba cd creator app, win the dvd...)

  I contact toshiba, I'm not sure that they understand what I want, I got a new dvd of restoration with the same problem

  Anyone has a solution I would be very happy

  Maybe something to change in the bios but I don't know what?

  Thanks for any help

  In General original Toshiba recovery image is tested and should work properly on certain model of laptop. If there is a problem with recovery original you should clarify this with Toshiba directly.
  As far as I know the BIOS should be set to default settings and nothing should be changed in the BIOS settings when you want to use the recovery image.

  All I can imagine is that there is something wrong in the image itself. In the past, I had a similar problem with old Portege 2000.

  Is done: If you want to use the original image you must clarify this with Toshiba. Toshiba must offer good job recovery image. If you want to use own WXP then you must purchase the license for this. Toshiba has nothing to do with the activation of the OS.
  (> I have to do this on 20 computers, laptops and of course not, the toshiba cd soft > creator, win the dvd...)
  How to understand this?
  You want to buy a recovery disk and install it on 20 laptop computers Tecra absolutely identical?

• Cannot run recovery disk on Tecra A10

  I'm trying to do a system restore on my Tecra laptop a10 and follow the instruction to hold down the zero key and then pressing the start button.
  The hard drive recovery mode message appears at the bottom of the screen but then the laptop computer will continue to boot normally and won't give me any options to restore the laptop.

  In fact, he travels it's normal startup process.

  Can someone tell me what I am doing wrong?

  Thank you.

  Hello

  Are you able to retrieve the laptop using recovery disc?

  Did you create a recovery disk? Isn't it? Then I highly recommend this creation!

  By the way: this is a great description how to use HDD recovery:

  + How to recover a Toshiba notebook with the HDD recovery procedure.
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

  Welcome them

• Tecra A9 - Recovery Disc Creator does not work

  I tried to make the recovery disc for my Tecra A9.
  I managed to make the two recovery system (DVD-R) discs, but when I try to make the Applications disc I get an errormessage right after that the program wants me to verify that I put a blank disc in my DVD burner.

  _Errormessage: _

  An unexpected error caused.
  Exit this application and start it again.

  (Error code: 0E01C7-15-00000000)

  Hello

  Maybe you should try different media
  These error messages appear especially if a disc is not completely compatible

  I guess you used the same discs previously in order to create the right recovery disk, I know it's strange, but I think you should try another disc.

  See you soon

• Tecra M2 - recovery question

  I bought an old laptop Toshiba Tecra M2, without recovery CD.

  As far as I understand (I'm a beginner), there is no way to make recovery CD or DVD on this laptop with «HARD drive recovery»

  Is this good?
  (I saw that on Toshiba 'support newsletter
  Toshiba HDD Recovery Utility Document ID: 98081179)

  Is there any other way to do it? What will happen when the hard drive must be interrupted?

  In fact, the only way should be to buy an old hard drive of the laptop even.
  Will it work? (maybe the serial number is located in and stop the change?)

  Can you help me?

  Thank you

  (Sorry for my English)

  You mean this FAQ:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/bulletin.jsp?soID=806477

  To be honest I n don't know what your question.
  Do you need a recovery disk?

  If you need a recovery disc, then you will need to buy the Toshiba ASP in your country. If all goes well, it will be possible to get this drive because a very few cases, it s not possible to order a recovery disc, if the laptop series is too old.

  Toshiba article explains how to burn an image that was stored on the HARD drive
  This laptop has not been delivered with the recovery disk and it was therefore necessary to create this disk using the procedure described in the article.

• Creating a product recovery disk

  Hello all,.

  I currently encounter some technical problems with my Qosmio G20 which are almost certainly related material. Before I have to send my system back to people kind of Toshiba, I want to create a full backup of my current configuration of the system, or more specifically a product custom recovery disk similar to the one provided by Toshiba.

  From what I understand of your average product recovery disk, it consists of an operating system that is scratched downwards (usually Windows 95/98) and a disk/partition image (which is to restore). It seems so that it is within the reach of us ordinary people to produce a bespoke, product recovery disc is possible and if so how should we do about it? Also (as my current setup probably carries a little more "inflate" than the original default factory configuration) is it possible to create a multi-disc product recovery solution?

  I look forward to any assistance provided.

  Kinder,.
  Lee Hyde.

  Hello Lee

  I guess you have preinstalled many useful applications and also optimized OS preinstalled. The same situation is on my laptop Tecra and if something goes wrong (defective HARD drive or a virus) I need hours to install and configure the new OS. Because of that I created my own recovery DVDs and also my own recovery image. To do this, I bought Norton Ghost 10.0.

  By using this software, I created my own recovery image and recorded on the second partition. If the BONE is infected with the virus, I am able to recovery OS and it will be as before without any CD or DVD. I browse to the saved image and after 20 minutes, things go back like before.

  Of course, you can create bootable DVDs and save the image ghost on DVD. It costs a bit, but trust me it's really good investment. Of course, on the market, you can find many other similar products. Also talk with your friends and colleagues. Maybe one of them has very good experiences in this regard.

  Unfortunately, I can't tell you much about the recovery of product multi-disc.

  Bye and good luck!

• Recovery disk download

  Hello

  I am looking for my Toshiba Tecra S10 - 183 RECOVERY Disc.
  Can I downloaded anywhere?

  Best regards

  Etem

  Recovery disk or recovery image cannot be downloaded.

  If you need a new one, you must order by Toshiba.

  Check please - https://backupmedia.toshiba.eu/landing.aspx

• What recovery disk belongs to which laptop?

  Hello

  We have several laptops from Toshiba (Satellite A100, A200, U300, L300, Tecra M9) and several recovery disks. All recovery disks look alike (the only difference is a code starting with GMR400. How will I know the drive I have to use with a given mobile? Is it possible to tell one of the others? Or I can use any disc with any laptop?

  Thanks for your help

  Hello AMB

  Unfortunately I can't help you much about it because those numbers don't mean a lot to me. Also, I believe that no one here can help you with this stuff. What you can do is to contact nearest Toshiba authorized maintainer and ask for help. They have access to the database of Toshiba and I think they can help you.

  The fact is that you cannot use any disc with any model of Toshiba laptop. Saved on the recovery disk recovery image is created for certain model only and recovery image contains specific drivers for the specific model laptop (depends on the hardware platform).

  Bye and good luck!

• HP Pavilion p6 2000-ukm: recovery disk/boot on a new HARD drive?

  Hello

  I have a hp Pavilion p6 2000 ukm. Recently I started getting on my HARD drive error messages, saying it was a failure. I recently bought a new HDD in my pc. I connected it correctly and it says that I need recovery disk / boot disk.

  To my knowledge when I bought this pc there was no disk Windows 7. Now I know on workstations, you create your own.

  My question is... How to get windows 7 installed on my new hard drive when I plug it in? I'm looking for the iso of windows 7, I think that his name, but I can't find any .iso file.  I'm trying to install windows 7 on my new drive HARD I need not my other files like music... etc. I'm looking to get my HARD drive installed with windows 7, where it has IE and I can go back to the installation of everything I had previously. Should u use "create a system image"? Its a big file and requires 7 + dvd discs is my only option? I have my 25 key windows 7 as well.

  Any help is thank you attended.

  Hey,.

  Here's the phone number,

  02076600596

• Bought the new model of HP m8530f... impossible to create the recovery disk?

  Bought above the pc about 3 months... still new to all this, I'm just a simple user of office applications and surfing.  Fallen on the disk recovery and reading that you can create your own recovery disk or the order of HP.

  Once again, the pc brand new.  I was all order from HP, but saw wanted to try to do it myself and save $20.  I followed the steps, arrived at Recovery Disc Creator, the moment where I click Next I get an error like this:

  "A recovery disk set was created for this pc. That one game is allowed per pc.

  WTF?  It was brand new, out of the box!

  All this experience?  I really don't want to pay HP $20 when I can make myself at home.  However I can not because as the "already created recovery disc?

  What can I do?

  I was able to connect and discuss with a representative of HP.  They have made an exception and will betray me a free recovery disk!

  Now, that's service! That means a LOT to me!

  Thanks for your suggestion to CherylG!  I have not found this file, that you suggested... and not an expert to change the extensions of file... so don't go any further!