Telepresence TMS Server TCS

Similar Questions

• TMS and improved security server TCS

  Hey there everyone!

  On the Tandberg Web site, there is a page that contains updates for the OS that have been tested for use with the administration server and content server security.  However, the last update was 9/2010.  Is there a comparable download page here on the Cisco site, with versions I hope more up-to-date?  I have looked, but could not find.

  Thank you!

  I asked one of the ancient engineers TANDBERG, who is now with Cisco, just on this subject, and he indicated that he had used the Windows Update normak, even for the TCS, feature and if there is a problem, he would just roll back this particular update.

  I did exactly that with our TMS server and have not had a problem yet.

  The second generation servers TCS are not devices and doesn't look anything like first generation servers, so I'll start doing the same thing with the TCS as soon as the remaining 2 were replaced by more recent, industrial research material.

  Cisco had a contract to upgrade in place for some time, maybe even the case, that they are eager to get rid of the old boxes of TANDBERG TCS - well, it's the impression that I myself still.

  Bravo jens

• TMS and TCS Cluster

  We had two boxes of telepresence Content Server, as separate in TMS for a while now (TCS01 and TCS02)

  Recently, we grouped matches of two.  A day or two after having done this, the TCS02 device appears in TMS with an error "incorrect authentication information.  TCS01 is fine.

  Would we still followed the two devices separately in the TMS, or should we now be treated as a single device (via the pole DNS entry)?  Or is there a problem with TCS02 do we do?

  Hi Wayne,

  Try the steps below and let me know your comments.

  Here we must activate and change the API password in CHT management settings

  set a new password TCS (which is used for adding the TCS to the TMS
  Server)
  Connect to the web interface of TCS¹s go to

  Management > Configuration > Site Settings > API

  Ensure that the API is enabled. Choose a new password, and then save it.

  The user and the password in the settings of the API is the same user name and password
  who to be used when adding the TCS to the TMS

  Regrads

  Shyam

• TMS (server) device issues

  I have a few questions about the server TMS, the autonomous unit version.

  (1) I never remember to put a password on her. What is the default?

  (2) can I install the Extension of commissioning on the device?

  THX,

  RF

  RF,

  The password for THE default on the device has been "TANDBERG".

  To question #2, is the official response from Cisco:

  Cisco TMSPE may be installed on the now discontinued Cisco TelePresence Management Server, but note that system resources are limited to 2 GB RAM, which will reduce performance. We recommend using the server for small deployments only and ultimately migrating to hardware with more resources available.
  

  Thank you

  Justin

• Exchange of TMS 3.0.1 & TMS 13.2 Cisco TMS server does not respond. Put an end.

  Hello

  I recently upgraded to TMS 13.2 and installed Exchange TMS 3.0.1. Installation and Configuration worked well, but no event is synchronized to MSDS. If I look at the log file, I see the following line:

  Cisco TMS Server is not responding. Halting.

  It seems that TMS Exchange is not able to communicate with the TMS. Setup worked well, and the TMS user is Super Administrator, so I don't think it's a problem of permission.

  I have attached the journal exchange of tms with level Debug of the game.

  Any ideas?

  Hey

  Using HTTPS or HTTP to communicate with the SMT server through the TMSXE service?

  Also, I would look in the Windows event logs to see if there's something interesting here. Especially check the application + TMSXE the event logs. I Don t want to join here (it's for the TAC) but if you see something that could be linked to the issue, please let us know.

  Otherwise, I recommend you get help from TAC on this since it is more appropriate for a deeper repair.

  / Magnus

• TMS server and control the VCS

  Hello

  We have a customer's request if they can change the usename (admin) of control VCS in the TMS server. They don't want to purge the VCS of TMS server control, because they still need all the TMS Server historical reports. Basiaclly, they won't use the username: admin more to managing TMS server. They can create another account in the control of VCS with admnin rights, but how they change in the SMT server without purge from the TMS server.

  In the server of TMS, the VCS control connections tab, there is a place to change the password. but no place the username change.

  TMS software version: 13.1.2

  VCS Control version: 7.0.1

  Note: I noticed that this option is available on the server SMT version 14.2.

  Thank you

  Kind regards

  Chris

  Hello

  Using a different name that 'admin' to manage the VCS was introduced in TMS 14.1 (CSCuc88048). Not even bleed and add will help them, I'm afraid!

  Your client is upgraded if they want to use a different user name.

  Kind regards

  Kjetil

• TMS Server installation

  Dear experts,

  Apologies if this has already been asked (and answered). We currently use 13.2 TMS (with Provisioning) installed on the server of Tanderg Management Suite.

  Is it possible to install the v.13.2 on our own TMS MS Windows Server 2003 or Windows Server 2008 that is in line with the requirements of harware and software specified in Cisco_TMS_Install_Getting_Started_Guide_13-1-2. Maybe we need something else?

  Many thanks in advance,

  Nick

  Hi, I can't find the link to the message in this app, but answer the question by Dale Ritchie in another thread if you search for 'device 13 to 14'. I copied in its response:

  The TMS device must be able to handle an upgrade to 14.2.1... although we remove soon supported for Windows Server 2003 and the TMS is EOS/EOLed.

  Therefore, I recommend that migrate you the application MSD and MSD SQL db (aka tmsng) to a customer owned server, HW or VMware.

  And if you 'migrate', note that you will need to get the new release for the TMS key since the TMS release the keys for the first TMS device started with 80Bxxxxx and the sw begins with 80Axxxxx. To do this, refer to the following instructions:

  1. the customer must first order a copy basis of TMS using CTI-TMS-SW-K9. This will provide them with a serial number non-appareil/software-only that will begin with 80Axxxxx. As the basic software, it will come with 10 licenses of system. So they buy actually 10 additional systems of what they had before.

  2. once they have new serial number, call the TAC and ask an SR to be raised with GLO (global operations of licenses). This is a request for re-accommodation for options on their TMS Server device, with a serial number that starts with 80Bxxxxx, to re - host new software serial number alone (again, starting by 80Axxxxx).

  3 GLO will forward the application to the TMS PLM. The PLM TMS usually approves most, if not all of the elements of the application.

  4. the customer will receive back a new PAK (product authorization key) to face their serial number of 80Axxxxx to the cicso.com/go/licensing page. They can then update their existing installation of TMS with the new release key. After pressing the Save, this will update serial number in the lower right of the browser. All they need to do is add keys option one by one, and then tap Save when done.

  Rgds,

  Dale

  Sent by Cisco Support technique iPhone App

• Telepresence Content Server

  I've reviewed a few information about the content of telepresence server and thought someone here might know the answer.  I read conflicting information.

  1. The content of telepresence Server allows to watch a live stream?
  2. The content of telepresence Server allows SIP?  The data sheet said yes, but the doc said H.323 only.
  3. Then the auto-join the content server with TMS telepresence session?  My hypothesis is Yes since the endpoints can be set to auto-answer/join.

  My goal is to set up a registration and solution to this TCS in combination with REV and a DME is proposed, but if the TCS can all do by itself and then unload the records to a NAS, so I wouldn't need the rest of the solution.  Thanks in advance.

  1. The appliance and the virtual TCS can support 5 or 10 simultaneous on the records of the application, and any one of those, 2 of them can also be broadcast live.
  2. You can use h.323 or SIP with a standalone TCS.  From TCS version 6.2, you can now have a cluster using h.323 or SIP, before 6.2 it was only H323.  The user guides and admin are incorrect and still be up-to-date to reflect the SIP enhancements in version 6.2.
  3. You can schedule recordings of TCS with TMS without problem, we do it every day.  The downside is that you can't plan a TCS cluster using SIP, TMS have not yet updated to reflect the changes in version 6.2.

• Update | Migration - Cisco TelePresence Content Server

  Hello...

  I have a physical camera TCS M2, I would like to upgrade to the latest version 7. XX verified but it is apparently not possible to perform this procedure for the unit of these versions. What are my options? Is there a version compatible with the model of this device? My solution would be virtualization? Can someone help me with a possible solution?

  Best regards...

  You mention that you're running a TCS M2, which is a second generation aircraft, non - UCS Server?  If so and you want to stay on this material, you can run TCS S6.1 up to S6.2.1 as a virtual machine on that server.

  TCS S6.2.1 Release Notes

  TCS S6.2 VM Installation Guide

  If you plan on TCS S7.x running, you must migrate the TCS to the virtual device, you can run it either on a third generation or fourth generation TCS device or third spec-server meets the minimum requirements.

  TCS S7.2 Release Notes

  TCS S7.1 VM Installation Guide for existing customers

  If you need more information or help, suggest that you move your thread to the telepresence of forums where these devices are most active section discussed.

• telepresence license server problem

  After you install server telepresence (ova 4.2.4.23) and install license keys, under configuration > upgrade > have management got the keys next feacture: encryption of media - activation of the VM - what other permits are required for the server of telepresence? is another way to install the license to activate the function keys

  So, you have activated the multiparty licensing on driver?

  As for the question on voice only, you must look at your config, you configured following the integration of CUCM-conductor guide.

• Telepresence Content Server: Dissemination to the Public and private users

  *****

  Infrastructure:

  TMS 14.5 (private network)

  VCS - C 8.5.1 (private network)

  VCS-E 8.5.1 (Public network)

  S5.3 TCS (private network)

  Codian: Supervisor 8500, MSE 8510, 8321 ISDN (private network)

  *****

  New to this, so I don't know what would be the best way to do this, but basically the goal is to broadcast videos of TCS to the users of the network internal as live audiences without security problems. Try to do this without an external broadcast service.

  It is the State that works very well for internal users, but is not available to public users because it's on a private network.

  Any help is greatly appreciated.

  Thank you
  Mike

  You will need to provide public access to your Cameras, you can consult the administration of CHT Guide for a list of ports. We have our TCS on a private network and have the lanes of traffic through the network load balancers that rely on the public network to provide all access public and private.

• Edge router with CUCM/Tel Telepresence SX10 Server Mirotik / Tel conductor

  Hello

  I have a client with 15 sites connecting with Mikrotik router-Board of Directors.

  I have to questions of implementation, in this network, a video-conferencing solution with:

  15 Telepresence SX10, one for each sites

  CUCM

  Cisco Telepresence Server

  Conductor of Cisco Telepresence

  The Cucm, Serveer telepresence and the conductor will be installed on the main site.

  Thank you

  Yes, I also prefer this option if your go direction CUCM because he has already included as an option for CUCM licenses (multiparty license of Cisco) and lower costs.

  Kind regards

  Acevirgil

• Conference of ad-hoc using telepresence virtual server and conductor

  I'm working on the implementation of a system of telepresence with 10.5 CUCM, telepresence Server version 4.2 (4.18) and telepresnce conductor version XC3.0.3 (both are installed on a virtual machine), I tested with a Codec SX80 with phones and telepresence 60 model 8941 SpeakerTrack.  I have some doubts about the features out.

  When I created an ad hoc conference and a third participant, this last participant's audio call only.  The conductor, I have 5 alarms and don't know how to fix them, look at joint file, talk about each alarm:

  -Alarm feature encryption key, there is a guide that is not clear to me using a Windows Server, is there another guide for this?

  -Alarm of telepresence server capacity which depends on the license?  I only have a single screen license

  I appreciate all the help that could help me solve this problem.

  Kind regards

  Juan Carlos Arias

  LIC-SW-EXP-K9 is your series Expressway.

  I don't know the part number for the telepresence server encryption key, but I think it is $0, you should be able to send [email protected] / * / and if you don't receive a PAK that he asks for it.

  Your conference models look correct, don't know what the problem could be just the hand.

  Multisite option key is not required, it is to allow the microcontroller embedded on the endpoints, for example your SX80.  In this case, you use driver with a server of telepresence to host conferences, so it is not necessary.

• Telepresence Content Server on BE6K - storage capacity?

  The BE6K now comes with an option of TCS for 1 disc and 1 live stream. I can't find any docs showing the ability of local storage for records. Do I have to move everything to a SAN?

  RF

  The document you are referring is here: tcs-record-size-examples.

• Cisco TelePresence error Content Server Login

  Cisco TelePresence Content Server v5.3 build 3316

  When I try to log in to Cisco TelePresence Content Server, it is not verfying the administrator username and password. Later, I have to enter link below and enter the administrator username and password and it is letting me.

  http://10.7.1.38/TCS/#page:login & rescue: true

  Kind regards

  Mohammad

  Hi Mohammad,.

  The link you are trying is the TCS rescue mode. The reason for its non audit admin uname & pwd you might have changed the authentication settings on the site settings page. If authentication earlier was local and you have changed domain or LDAP then TCS will try to authenticate by using this mechanism and will not take admin local credentails.

  To avoid this, once connected via rescue link, create a user with admin rights

  Configuration > users and groups > add users and group > add a user with rights to site manager

  Log out and then try looging with the user that you created. It works perfectly.

  This also happens when earlier you use domain authentication and you've changed your LDAP authentication or vice versa. Creation of the user with rights to site manager is so important before you change the authentication mechanism.

  Hope this information helps.

  Please rate if you find it useful.

  Kind regards

  Gerard