Tempered glass will ruin my 3D Touch?

Similar Questions

• Tempered glass screens are ruining the look of the iPhone?

  Hey guys,.

  So, recently I bought the iPhone 6 Plus and also bought a screen in tempered glass. At the request of the screen, I noticed immediately that the screen has Lint and dirt adhered. I understand the Plus 6 is bent sideways and therefore products probably would not be available to cover the entire screen.

  All this experience or whether any screen of toughened glass exists covering the entire 6 more screen?

  Thank you very much!

  I have a glass on my iPhone screen 6 Plus. It is perfect. But only because I had them apply it to the store. They are very difficult to apply without tasks.

• Tempered glass

  Hi, I have problems with tempered glass, I tried 2 types of glass and both have the same problem. If I use an application like Facebook or internet where I roll page a long downtime, the movment goes trolling. I must repeat my move even four times until the srceen continues downwards or upwards. My movements have the same intensity. And when I change my position (angle of finger) when I m lying, it s worse still ith touches. So I removed the glass, and it looks good. The problem is strange because my intensity can be different (soft, hard) and it s work good and some time it will happen. I m crazy about her. I want to use some protector but the sheet of Don t. could someone recommend me what is the problem? I used nilikin and vmax. Sorry for my English, I hope that yoúll will understand me. Thank you for the help

  I mean, you may have a problem with the digitizer
  Go to settings > about phone > diagnostics > test > touch screen test can view test and see if there is something wrong

• iPhone case 6s + tempered glass combo for complete protection

  You will need to completely protect the iphone to my wife crazy toddler.

  I currently use a portfolio case (here) without protective glass. I like the case but I think that I need a rugged protection that my toddler started throwing the phone around on hard ground.

  I like the idea of tempered glass, but do not know if using tempered glass stop me to use any case "robust" - same one I use at the moment.

  Please recommend "Compatible tempered glass (fully covered or not fully covered - is not serious) & robust casing combo" in a (reasonable price range<$30>

  I recommend that buy you a cheap toy for your child.

  iPhone is not a toy and expensive.

• Windows 8 will work as a touch screen on my computer to windows 7 touch screen?

  I tried to find an answer for "windows 8 will work as a touch screen on my windows 7 HP touchscreen computer.

  It seems to have worked on this HP Touchsreen PC

• Removal of tempered glass?

  Hello, everyone.

  I am new to the Apple family - I got my iPhone SE a few days ago and I love it already!

  My question is on the glass for the screen. I had one and could not install correctly (there are a few characteristics of the dust and fingerprints cause I was super nervous, overall, I tried to reapply several times but it was a failure). I wanted to order a new quality, one (I decided to go for Nillkin 9 H + Pro), but I wonder if I can damage the screen of the iPhone somehow to remove the old and put a new, or if the constant peeling power could destroy the screen? I would appreciate your opinion on it.

  I do not know. Probably not. Why do you need a still screen protector? They will not stop burst if left falling glass. They are only a false sense of security and only a protection against scratches, which is difficult on a screen of iPhone anyway. The money is better spent on AppleCare + who will provide replacements for two years for a small franchise. Drop your phone with a protective screen and you will have to pay a lot more to have the screen replaced or a replacement under warranty.

  In my mind, it makes sense to pay extra for Apple AppleCare +. You've spent a lot of money on the device, a device that works in an ideal environment, suffers from water damage and a fall. Long term you save money in my opinion. In addition, when you arrive at the 23 month mark, you can probably get a refurbished unit with a new battery, the screen and the case for less than $100.

• is the glass front/digitizer for ipod touch 5th generation and iphone 5th generation the same?

  I have a digitizer broken on my ipod 5th generation touch, it's the cheapest digitizer with the first delivery I found on amazon:

  http://www.Amazon.com/group-vertical%C2%AE-screen-digitizer-replacement/DP/B01E4 6Z8PC.

  It is, however, for the iphone 5, not the ipod touch 5th generation.

  these parts are compatible?

  If this is not the case, can someone point me to the cheapest place to buy a new glass + digitizer for ipod 5th generation? I'm not afraid to do my own replacements and have done so before.

  I need not have the first expedition to the France. the cheapest place on the internet, which is reliable and ships of the United States would be perfect.

  any help is appreciated!

  They are similar but different.

  You want to:

  http://www.eBay.com/ITM/like/351429563535

• Magnifying glass will not die!

  Whenever I turn on the computer, I get this magnifying glass thing where my cursor should be.

  I tried all the procedures suggested on this forum and others to turn it off, but it just keeps turning on.  It is really annoying and makes it very difficult to get anything done.  Help!

  Hello Chibi2,

  ·         What are the steps you tried to disable the magnifying glass on your computer?

  ·         Do you have any software installed on your computer mouse?

  ·         Remember to make changes to the computer before that happened?

  First of all, you should try to disable it from the control panel.

  1. click on start, all programs, accessories, accessibility and accessibility.

  2. click on make the computer easier to see.

  3 uncheck Turn on Magnifier and click Save.

  If this is already disabled in the Control Panel, you must check the mouse settings if it is enabled.

  If you have a Point of Intelli software installed on your computer, you can try to disable the magnifying of the mouse settings.

  You will be able to access this setting in the list of programs. Open this software and look for the option disable the functionality of Zoom (magnify).

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 8 will not detect iPod Touch 2 generation

  Hello!

  My problem is I have an iPod Touch 2 gen and when I plug in windows cannot detect it. If I go to post work is not in the list, or if I go to Device Manager, it is still not detected not even in portable devices or controllers Bus USB, but the iPod is charging. It happened after a restored building and now I need to connect it to iTunes, but it does not work. I tried with Windows 7, 8 and 10, and I don't know what to do at the moment. My 5s iPhone works fine with the same computers.

  Please help me, thank you

  Greta

  Hi Tom,

  Thanks for posting your query in Microsoft Community.

  I understand that the iPod Touch 2 connects not with Windows 7, 8 or 10 and I will be happy to answer your query. Let me ask you;

  • IPod Touch 2 appears in iTunes?
  • You receive an error message?

  This could be due to problem of incompatibility with iTunes. Given that iPhone 5s connects without any problems, you can refer to the suggestions provided by Apple in the link below.

  iPod touch not appearing is not in iTunes

  If the problem persists, I would ask that you check with Apple support.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Will there be new touch ID problems with iOS 7.1 measures?

  I have an iPhone with iOS installed 9.0.2 6. I was hesitant to go to iOS 9.1 because of problems with the Touch ID reported about 4 weeks ago. Thereafter, who had been an interim update (? iOS 9, 1.1), but I have seen no recent comments. Are there developments in this issue? I note tha iOS 9.2 beta 3 has been released; However, the overview of comments I've seen of the 'new' address for the iPhone elements, but says nothing about the contact ID. Any news?

  I used each publication IOS 9 so far. Never had a problem with TouchID. And I have not seen much on this forum about people with problems so, whatever it is, it probably wasn't terrible together.

• A new g7 pavilion Notebook PC does not sleep on its own, will sleep all in touching power button / stop

  HP pavilion laptop g7. Product No.C5G29UA #ABA.

  Don't sleep on its own or on mains or battery. He goes to sleep when you touch the power button or startup, shutdown, sleep. The screensaver is off and it is fixed a recommended power settings.

  Hello

  Please find the link given below might help you solve your problem.

  The problems of sleep and hibernation

• New Windows Mobile 8 will not recognize Ipod touch

  I go to a PC from a Mac.  My new laptop (bought Jan 11) runs under windows 8.  The computer does not recognize my ipod touch (4th generation).

  When I plug it I get: "USB device not recognized. The last USB device that you connected to this computer has malfunctioned and Windows does not recognize it. »

  I tried on windows phone 7 my husband and got the same error.

  My ipod has never been used on a PC.

  I downloaded & installed iTunes successfully on 12 Jan.

  Problem solved with a new cable!  Plugged in and works perfectly.  Phew!

• ADE will not identify iPod Touch

  Installed ADE and allowed to my PC and downloaded an EPUB file to the local library book. Plugged the iPod Touch that ADE is supposed to recognize and authenticate. Didn't happen so I can't transfer the EPUB file to the handheld device. Can anyone help?

  Download a copy of Bluefire Reader on the Apple App Store.  Transfer your books using iTunes.

• ADE will not identify Kobo Touch

  Try to copy books from library PUB file on Kobo Touch but ADE does not show my ereader on the left side of the screen. Tried running ADE with connected/not connected ereader, etc. several times, but it does nothing. Tried to uninstall/reinstall the ADE and Kobo desktop as well as did a restart of the plant of Kobo.  The book shows and can read in ADE.  Tried several times to follow the other son instructions to read the help file in ADE (press F1) and follow the instuctions here to disable and re-enable ereader by pressing the keys (Ctrl-Shift-e or something) but I was never able to find something in this help document instructions for display for an ereader that is not displayed.  Using Windows XP.  Any ideads to recognize the drive?

  It turns out that mine was a defective unit.  I returned it to the chapters and they gave me a replacement.  I was up and running less than an hour and fortunately have many books from the library installed on my new Kobo with ADE.   Originally, as well as of the ADE do not recognize the Kobo, my computer did not recognize it properly either.  He showed like a flash drive and I got the error message (on three different computers at this time) that she needed to put in shape.  I hope this helps.

• A .psd file will go and not touch!

  So, I downloaded TWO files from .psd animation separated from a stock footage company. (Regular provider). I put on my FCPX calendar, he keys fine... SO... after it restores, the image loses its key! (black appears where transparency should be.)

  WEIRD! It works fine until it FCPX seems to want to convert the file.

  ANY SUGGESTIONS? A deadline with a client.

  Are you making it with a background? What are your rendering settings? You try to export?