Text that is not the same thread size

Similar Questions

• You can protect the parameters in an iPad with an access code that is not the same as that which opens the iPad?

  When I let someone use my iPad, I want to make sure they do not get in my settings. The access code that opens the iPad is not very secure because people could easily see enter me when I opened my iPad. When I go into settings/safari/passwords, he asks me my PASSWORD SETTINGS. That seems to imply that someone at Apple to a thought moment there will be a separate passwcode for settings. Why isn't there one?

  There is no access code 'settings' to prevent someone from getting your settings.

  There is a password of 'restrictions' which can be used to prevent a user from doing a number of things, such as installing applications, or using Bluetooth, etc..

  Restrictions of use on your iPhone, iPad and iPod touch - Apple Support

  

  As a bank card PIN, just be aware when you enter your password for the device that you cannot be seen that. Put yourself in an authentication code more secure as to 6 digits or alphanumeric characters for greater security. But don't forget your access code or you run the risk of losing all the data on your device.

• the numbering font size is not the same as the font size of text

  After generating the chm file, I noticed that some of the numbering sizes police were not the same as the font size of the text. Some of them seemed OK tho. For example, on a single page, it would be like this:

  

  The numbers are greater than text. But on other pages, the size would be the same. What is the cause for this and how to fix it?

  Hello

  This is very probably a css problem, check the html code of your lists. My guess is that the 'correct' lists have a class list attached, while the "incorrect" lists are not and use the default settings of the browser for the font family and size of the police.

  Please send the HTML for a correct and an incorrect list.

  Take a bow

  Willam

• Surely the size measure LMT has not the same

  Hello
  
  If we identify not UNIFORM, surely the size of the measure has not the same.
  
  However, http://www.oaktable.net/articles/locally-managed-tablespaces States
  
  + You can ask yourself, "If a single bit is a measure, probably all extensions in the tablespace are then obliged to present the same size?". It's true -as in the example above, Oracle allows you to specify any size you like, but it will be always reduces to a number of bits of the bitmap, where each bit represents a segment of the space. In any case, it is advisable for all extensions in a tablespace to be the same size, because it eliminates the space lost because of the fragmentation. +
  
  Doesn't it not bad?
  
  Thank you.
  
  Published by: OracleGuy777 on March 13, 2012 13:16

  OracleGuy777 wrote:
  So, you're saying that each bit in the bitmap LMT will be the size as much as the lowest possible? And if we have a measure 1 M, it is going to be 1 024 000 bytes?

  Only the hard drive manufacturers use 1 000 000 bytes. The rest of the computer industry has pretty much standardized on 1 MB = 2 * 20.

  In addition, if the BLOCKS are 8K (or 2K, 4K, 16K, 32K) and 8 K = 8192 bytes, and if 1 MB MUST be a multiple of blocks assigned, you can check quickly enough that 1 MB = 128 x 8 K - BLOCKS. (And Yes, you can choose ANY size you want for a block, but that can get silly and will probably cause "opportunities for off-peak service calls").

  And we know that extensions are allocated in BLOCKS. (So why no Oracle used number of advancements of level measurement?)

  >

  So if we have a 64K extent, followed by a measure of 1 MB, followed by a measure of 64K, Oracle will store as

  1 followed by 1 s to 1 M and then 1 for the next measure 64K?

  To answer your question (even if it is answered on this link to the Oak Table - explicitly)

  The ILO plan represents the size of measurement RB. And non-linear growth that the system uses after distributing a few extensions will always be a multiple of the size of this base.

  Then the first few times the table grows, it will be in blocks of 64 k with each piece slightly.

  The next time it grows, it will say "I have seen the growth here before and to save effort later" so it will distribute pieces of 1 M. And a piece of 1 M is 16 x 64K, so each piece of 1 M will be represented by 16 bits. Then, after a few of those pieces of 1 M, it will distribute pieces of 8 M and guess how many 64 K parts there are in this 8 M chunk - each represented by one bit.

  And since all this piece pieces in this specific tablespace are 64K, if a table is dropped, all of its pieces can be distributed to other tables/segments as needed with no wasted space.

  That is the second reason to use LMT.

  Now you know.

  But, how does that help you administer the database? (Other than following best practices to use LMT?)

• Is it possible to convert the standard numbered list to the list that appears on the same line a right after another? As indicated in 1. Text goes here, 2. Text goes here, 3. Insert text here

  Is it possible to convert the standard numbered list to the list that appears on the same line a right after another?

  Instead

  1. Insert text here
  2. Insert text here
  3. Insert text here

  This

  1 text goes here, 2. Text goes here, 3. The text here.

  This revised list can take multiple lines.

  I use InDesign CC2014 - if that makes a difference.

  the only way is to convert numbered in the text (select numbered list > ctrl (or right click) > bulleted & numbered lists > convert numbered text).

  Then, with search - replace, you can change the paragraph returns in space (or in space by commas as in your example)

• When I combine a PDF pages are not the same size, what should I do?

  For the most part it's jpeg photos.
  TNX

  To print on a new PDF. You could select the page of standard size (portrait or landscape) and reduce the size to fit (in which case all pages are larger). This approach would leave small smaller photos. You can also select fit to page so that all have the same size.

  There may be a preflight script that could do that, but I remember a hand.

• I just bought a Apple Watch and thought that I entered the same password as my iPhone. Apparently I did not, and now my watch is locked. Help

  I just bought a Apple Watch. Thought that I entered the same password as my iPhone. Apparently I don't have. Watch is now locked. Help

  Hi Rich

  Follow these steps to clear your locked watch and re-pair it with your iPhone:

  • Connect your watch to its charging cable - with power connected.
  • Hold down the side button until you see the cursor off the power.
  • Press Power Off (don't try to drag - just press more firmly than a normal tap), then press erase content and settings.
  • Then re-pair your watch by using the app shows on your iPhone, choose restore backup when the possibility.

  More information:

  Set up your Apple Watch - Apple Support

  If you have forgotten the password for your Apple Watch - Apple Support

• Force the tun DLLs in the same thread (wait the user interface Thread)

  Hello

  I want three different DLLs execute in the same thread, but this thread should not be "the Thread interface user. I have here a way to force them to do so?

  Best regards

  Jarrod S. wrote:

  Calls DLL should I really run in the same thread? Or is it required just that they are not running at the same time? In the latter case, you might consider using a semaphore to protect your DLL call, or maybe put all DLL calls into a unique slot - VI with a structure in case of deciding who to call to make. This second option could become more complicated if all calls have different sets of inputs or outputs.

  Using another system running other UI Thread won't work, because these delivery systems each get 4-8 threads to run with.

  HO on...

  Put all calls in an motor action configured to operate in "Other1" (for example) and then use "threadconfig" to set up for a single thread.

  Write a wrapper for each call to EI and...

  Do?

  Ben

• Case 'not the same subnet mask' - WRT54GL

  Hello

  I recently bought a WRT54GL router and tried to feed it with data from my ISP.

  I entered these data to my Windows system as well as my older router and it worked fine.

  These are:

  IP: 213.211.57.xx

  Subnet mask: 255.255.255.0

  Gateway: 213.211.56.1

  However, I get the error "not the same subnet mask" described here .

  If I run "ipconfig/all" to the machine which can be used to connect to the net, I don't get any additional useful info that I described here, (he is also in Czech :-)

  And there is no obvious conclusion in this forum thread.

  Any suggestions?

  Kind regards

  Matej

  OK, so I've solved this by changing the bridge and it works now.

  Interesting that windows was able to deal with him, but...

• I just paid my creative service cloud for a month, but there is a problem with the service, is that someone has the same problem?

  I just paid my creative service cloud for a month, but there is a problem with the service, is that someone has the same problem?

  I paid with Paypal, which is linked to my debit card and already wait two days.

  Thanks to the community

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• How to export the same MB size of my cr2 files in jpg or tiff files in Lr?

  How to export the same MB size of my cr2 files in jpg or tiff files in Lr?

  Let's say that my height is 22 MB, when I export the file in TIFF or jpg, although careful Iam with size of file settings, size, resolution, I can't manioukate how I want it.

  With jpg I tried everything, no matter what I do or a change in file size or meanless remains the same size - 7 mb instead of 22...

  Please advise,

  Best wishes

  T

  You should not even try to do it.

  JPG uses compression technology, so the files will have to be smaller than the original size of your RAWs. In addition, JPGs are 8-bit, while your RAWs are probably 14 bits, so the size needed to store your image will be smaller.

  Thus, there is absolutely nothing wrong with getting a 7 mb JPG of a 22 MB RAW.

• Documents InDesign CS6 for not the same pixel resolution

  I just opened in InDesign CS6, a document originally prepared in CS5.5. This document is in pixels. At 100%, the document must be pixel for pixel with my monitor (iMac 27 "to about 104 ppi), but it seems that it is more 100% if you calculate to 72 dpi. If a document of 980 pixel wide 13 inches on my screen! This is different from the previous way of showing pixel documents. And I don't see any preference that could bring resolution to the old way to show the scale.

  In Adobe Acrobat format, you have preferences to control it.

  This number as a bug to me.

  Spen says:

  Yes, I read your first post about the ratio of 1:1 ID. That's fine, but my questions remain. Why can I no longer specify text and traits using pixels? and why can I no longer see my files as they will appear in a browser. These features are available in CS5 they are now gone. Why?

  Your comment confuses me.

  Did you mean to say that you can no longer configure ID to display text units and traits as the pixels?

  This is not the same thing that you cannot specify text and strokes and pixels.

  So:

  • Ability to display dashes/fonts in pixels and not in points is a purely cosmetic function. Internally, ID treats points and pixels exactly the same.
  • Because it is aesthetic, and the calculation of points in pixels is really easy (the same number!), could you help us understand what is your real concern?
  • If you really want to, you can always type in "12 px" in the field.
  • I had the vague impression that when you created a Web document or an intention to Digital, then the specified unit is pixels instead of points. Appears not to be the case - my guess is that it's a screwup.
  • If indeed it was supposed to be automatic, I feel it's why the preference has been removed.

  (Incidentally, in the case where any who behind the scenes I was wondering, while the script API allow you to set this value in CS5.5, with app.viewPreferences.textSizeMeasurementUnits = MeasurementUnits.PIXELS; which doesn't seem to work in CS6, it generates an error: ' error: textSizeMeasurementUnits ')...

  To reiterate, I think it's probably a screwup in CS6 relating to a mismatch between what has been actually implemented (deletion of preference) and what was planned (automatic unit display) and not an intentional removal of the ability to show pixels. And yet, I do not understand why it really matters. What is a warm-fuzzy feeling you're looking for?

• Profiles of lenses for different organizations, but the same sensor size?

  I downloaded LR 4.1 RC today.  Some of my lenses are not explained in LR so I downloaded then Lens profile Downloader Preview 3 to see if there are all the profiles available for download.  For some lenses I found profiles, but they did not go on the same body I have (same sensor size however).   Can I use profiles for the lenses if they are for a camera body that is different from mine, but always the same sensor size?  I know that with a lens profile LR auto corrects distortion, vignetting and CA.  That will work if my body is different from that of the body used for the profile of the lens?  Thank you.

  Yes it is possible.

  I downloaded it with Adobe Lensprofile Downloader

  In LR, I choose it bonded.

  I have the Panasonic Lumix G 20 mm f 1.7 ASPH on Panasonic GF1

  and the available profile is (same lens) for Panasonic Lumix DMC - G3.

  Works very well.

  Frans

• I tried to buy my book - DEFAULT TEXT - your book seems to have default text that has not been modified. Printed books will not include this text. This means all my text will not print?

  Using OSX El captain on a desktop iMac. iPhoto 9.6.1

  I tried to buy my book - this box appears - TEXT by DEFAULT - your book seems to have default text that has not been modified. Printed books will not include this text. Does this mean that all my text will not print?

  I've been twice now and change the text of Bradley Hand to the Blackboard to Helvetica Neue - which seemed to be the default. Message remains displayed. I don't know what else to do. This is my third book over the years, but the first with this problem. Can someone advise please?

  Thank you Davina

  It is not a problem of fonts. It is the problem of the sample text entered by the models.

  The error message means that there is a text field in your book which is still on show at the text included by the model, and you will need to replace this text with your text. This textfield might be hidden behind a picture.

  If you create a preview of the book, such default text is omitted. Have you compared the preview of what you see in iPhoto? Text that shows in iPhoto, but not in the preview will be such default text.

  For example, the section 'Topic of this book' on the flap back in some themes is a default text that should be replaced by your own legend:

  

• Why date on the email received in my Inbox is not the same as reading mail?

  original title: E-mail Internet Explorer

  When I get a grateful e-mail that was read, the date on the e-mail received in my Inbox is different is up-to-date. However, the e-mail message when it has been read is not the same. Why is it so?

  Thank you, Daisy

  Hello

  You must ensure that your computer's date and the person responding to your emails should have the correct date and time.