The 320 GB HARD drive work in the WWAN Bay?

Similar Questions

• 1 TB external hard drive works on XP but not Windows 7

  1 TB Toshiba external hard drive.

  It works on my laptop that runs Windows XP bot not on the laptop that is running Windows 7, if the hard disk works. It also works on Vista.

  My Seagate (320 GB) hard drive works on the Windows 7 laptop - so the USB ports are not defective.

  When I plug the hard 1 TB drive that it appears not on the Manager list of devices, or the title of the disk management, still green light from the disk hard flashes and lights up like it normally does when plugged into the laptop XP.

  I have read all the forums and tried the following: edited the Registery values for mass storage devices USB (deleted and lower filters);  Edited the "Usbstor" INF file as suggested check, the Toshiba site for any compatibility issues, and they have suggested that it is a problem of windows 7, given that the player works on other platforms.

  Because the disc is not visible in device etc Manager I can't try the other options.

  Any input would be appreciated

  I found the problem to be with the controller Toshiba uses on their external hard drives.

  I removed the hard drive Toshiba of the carcass, put it in an envelope of SeaGate (thus using a SeaGate controller) and it worked fine.

  To my knowledge there is no software around HD Ext Toshiba and W7 work. Take the HD out of the envelope, buy a cheap eSATA to USB connector & problem solved.

• I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  Hello

  You will need to reverse the clean boot, as it is either incidental compared to
  the real cause of the problem. What, where you try to fix initially using the cleanboot?

  You can access Mode safe? Repeatedly press F8 as you start? If so you can try the configuration - control panel
  The Device Manager - graphics card - Double click on - driver tab - click the driver UPDATE - then
  Right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure) is
  CTRL + ALT + DEL and the processes tab find EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation that needs to save the data, but you will
  to reinstall the programs. This also requires correct Vista disks especially for OEM versions. You
  will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - enter a bracket )
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite A300-1J1 - 320 GB HARD drive update

  This model I have has a hard drive of 250 GB installed, could I pull it out and say put a hard drive of 320 place. Thanks for your help.

  Yes, it might be possible to use a bigger HDD as a 320 GB HARD drive.
  The laptop supports a SATA controller so it shouldn't t be a problem!

• Hard drive works 100%

  I have an Inspiron N5010 A04, OS Windows 10 Home.  The hard drive works 100% for minutes at a time as shown in the Task Manager Performance page, the player lists that ST9500325AS 500.11 GB, is there something I can do to reduce the amount of time the HD works 100%?  Either way when I try to run Diagnostic Dell programs the system runs to get your Tests and then stops.  Any idea on this?  Thanks for any help.

  Thanks for the reply.  He does it all the time and it is not an update.  I can recognize update.  The pc would work fine.   The hard drive begins to run 100% and continues for several minutes then goes back to normal operations.  I check with the Task Manager and you can watch it work 100%.  I don't do any resource heavy operations at a time.

• Tecra M9 - does not recognize the 320 GB HARD drive

  Hello @ all,

  I tried to install the HARD drive, but it seems to be not recognized by the BIOS. Any chance to get this problem resolved?
  With Acronis Disk Man. I get an error message: No. HDD installed!
  BIOS version is 1.80, HARD drive is a Seagate ST9320421ASG (Momentus 7200.3 320).

  Thanks in advance

  Hello!

  Have you tested the HARD drive in a laptop or in an external enclosure? Maybe it s faulty.
  Or you test another HARD drive in this notebook.

  Normally a 320 should work in Tecra M9.
  There is a new version of the BIOS on the Toshiba, but I doubt that the problem of the article, but try to update.

  Good bye

• Satellite A210-128: I want to change the 320 GB HARD drive 7200 RPM

  Hallo all

  Can someoane help me with this little problem?
  I have a portable satellite A210-128 with a hard drive of 250 G 4200 RPM (* slowest *)... I want to change the hard drive with a hdd 2.5 "Western Digital 320 G 7200 RPM (* speed *).

  Question:
  1. If I buy a disk sata2 hard can I put on my laptop because my A210-128 has a disk sata hard?

  2 can I I install vista on this new hard drive on my vista dvd, im asking this because I want to be shor that my recovery dvd * RECOGNIZES THE NEW HARD drive * and I can install a new copy of windows or installing dvd can * only works with disk drives hard toshiba *... ???

  Thank you.

  As to the question;

  (1) I think a SATA2 HARD drive would go because the standard SATA2 is compatible to the bottom. But I assume that the system will operate as a good HDD SATA.

  (2) Yes, you can install vista using the Toshiba Recovery DVD. It shouldn't be a problem with a fresh install

  Good bye

• Portege M400 unable to find the new 320 GB HARD drive

  Hello

  I'm moving my 80 GB HARD drive to a new WD 320 and research questions. Although I've updated the Bios with the latest version of the disk hard is not down to any operating system when it is in the main HARD drive Bay. The weird thing is completely visible in the removable Bay. Is this a configuration issue, I am missing or is the machine not reconise the 320 GB drive because that is the essential motivation?

  Any help or pointers would be great

  Thank you

  Hey Buddy

  In my opinion, your new HARD drive cannot be recognized because of the size of the HARD drive.
  The 320 are simply too. I think that the laptop would be able to use a 100 GB or 120 GB of HARD drive but the 320GB are not supported.

  So change your disk of 320 GB to a smaller size and try again.

  Good luck

• Will be the 500GD Seagate HARD drive work in my HP G61-321NR

  The Seagate 500 GB HDD will work in my laptop HP G61-321NR

  Yes it will be as a sata interface & size 2.5 "& 9,5 mm or less in height."

  I would consider a SSD will be speed big shot in the arm to your machine, to know you can also use 2 disks on this model by sliding the Bay is of dvd player do not use much & using a shopping cart of hard drive bay that you can buy online for less than $10 if the options are very flexible. The dvd player can be put in external usb caddy & they only around $16.

• When I start the machine, continuous hard drive work for almost 1/2 hour, meanwhile if I open a program, the machine runs very slowly. Help solve the problem please

  I have wndow XP Home edition service pack 3 installed on my lap top. When I start the computer the hard drive continues to work for almost 1/2 hour; Meanwhile, if I open IE, or any program, the machine runs very slowly and I just can not open the program up until the drive hard light is off. Please help solve the problem

  How much RAM you have on your system? (Right click on "My Computer"-> properties)

  As a general rule, Windows XP does not work well if you have less than 1 GB or more of RAM.  What usually happens is that your RAM capacity is exceeded leading to overflow on virtual memory (the drive) to compensate for the need of RAM in the computer.  This causes your system to beat on your hard drive and slow down your system.

  If this is your problem, the options are to increase the RAM on your system or decrease the non-essential programs that launch at startup on your computer using a tool like Autoruns.

  HTH,
  JW

• Share a lightroom catalog - Does the catalog and images on external hard drive work?

  I manage a small part of the flow of images overall of the client by updating their prescence web basis with new works and relabelling/download earlier works. I believe that this requires the catalogue and the library of images that will be hosted on an external hard drive that can travel between us two. We work both on PC with LR 5.3.

  The workflow should look like this:

  Customer uploads new images on external hard drive and import LR

  'ClientCatalog' is created

  Flags of pickaxes and creates a Collection of those Picks

  Hard disk is handed to me when I opened "ClientCatalog".

  Make changes suggested in pictures

  Add detailed tags and metadata

  Download on various media sites, social and Web sites

  return the drive to the customer

  Is there a potential problem with this workflow? My assumption is that if everything is housed on the external hard drive, so there is no worries for the catalog with all updates. Can someone find out about potential problems, that I might have forgotten? Are there of "security protocols" you would add in to this workflow (not to mention that everythign on another hard disk mirroring) which would you suggest?

  Photwell wrote:

  I came across this problem with my own catalog a few weeks ago. I plugged my external hard drive into a different USB port and everything was gone.

  Not gone, just addressed. It can be re-addressed as required. I think that's enough on MacOs, to name the drive. Under Windows, the details vary depending on the version of the OS (Google for instructions), but it's for Win7:

  http://pcsupport.about.com/od/Windows7/HT/change-drive-letters-Windows-7.htm

  and it's a good idea to assign a drive letter quite a bit more later in the alphabet, to restrict the possibility of ever finding this already taken letter. For example, it might be X: to HDD external , or P: for Plug in car, or anything that makes sense to you...

  After having done this, the re-start of Lightroom and open the catalog, images will be at the first go in offline mode (previously used location not found). To get online, it will be necessary to re - browse the folder parent for all your image files, to reflect its new location under the new reference in car. That done, the location information of catalog for all images and subfolders located under this parent folder, automatically updated. If that parent does not appear in the list of records of LR, you right-click and choose "show Parent". Display LR then reorganizes to reflect this real hierarchy.

  Best regards, PR

• The hard drive works for 1/2 hour at the start before I can use the computer.

  I tried all the registry cleaners, etc. with nothing doesn't. Is there a way to know what is happening during this time?
  I use AVG virus and tweak.now for other things.

  Hello

  1. have there been recent changes to the system before the show?

  2. what disc hard are you referring?

  Method:

  Follow the link below and run the disk check. Check if it helps.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  Let us know if it helps.

• post on the renaming of file hard drive works partially

  I have a set of photos to be published that is created from various sources with all the various photo naming conventions.

  To get a game with consistent naming, which is consistent with the sequence of the photos that I created, I use a publication on hard drive that uses a filename with the serial number.

  To my surprise, that this name is legitimately applied to 3 photo 5 sources, but the photo of 2 other sources are published with their original name.

  What could be the cause of this?

  I use Lightroom 5.7

  I've found what makes images differs from the others where the name change goes well.

  All images where the name change goes well (according to the specification of the function of publication) are in the same directory.

  All images where the change of name does not lie in a subdirectory in this directory.

  The publishing service is supposed to create a new directory and publish all photos with the format {name} - {sequence number}.

  I expect to name of the map to be the target of card; This list is the mapping of source name. As only the name of the lowest card is used, the pictures in the card under get a different prefix.

  I propose that the pictures in the subdirectory level. This should solve the problem.

• Extermal Toshiba USB 320 GB HARD drive not recognized correctly

  My hard drive does not recognize now them itself as a hard drive just an AT2P RC42 Cypress and is now useless after a few months in use.

  I uninstalled and reinstalled by the Device Manager. I then tried on another computer and I have the same problem, so it's the hard drive and not on the computer.

  It's an external drive USB 320 GB toshiba that previously worked fine, but now think its thing and nothing else.

  What can I do to fix this problem? Please help all my data on this drive...

  Hello

  Check it please this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=17412 topic. You will find similar discussions.

• iTunes library to external hard drive works on pc and mac

  Hello world

  I have 1 pc and mac 2. I also use the music library to icloud. However, it depends on the internet connection.

  so, I was wondering if I can put the "itunes library" file on each laptop, the "itunes media" while on the external hard drive?

  My idea is to use an external hard drive whenever I want to use the laptop. so I don't need to broadcast through library icloud music. Moreover, I need an external hard drive and itunes library to work on pc and mac.

  Cheers!

  See make a library of portable split. You will need either a for OS X NTFS driver or driver for HFS + for Windows in order to use the drive with an operating system. Also note that there is a delay when you first launch after passage of one BONE to the other.

  TT2